- 10 Aug, 2020 3 commits
-
-
Colin Ian King authored
The memory allocation failure checking for in and out is currently checking if the pointers are valid rather than the contents of what they point to. Hence the null check on failed memory allocations is incorrect. Fix this by adding the missing indirection in the check. Also for the default case, just set the *in and *out to null as these don't have any thing allocated to kfree. Finally remove the redundant *in and *out check as these have been already done on each allocation in the case statement. Addresses-Coverity: ("Null pointer dereference") Fixes: 1a86b377 ("vdpa/mlx5: Add VDPA driver for supported mlx5 devices") Signed-off-by:Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20200806160828.90463-1-colin.king@canonical.comSigned-off-by:
Michael S. Tsirkin <mst@redhat.com> Acked-by:
Jason Wang <jasowang@redhat.com> Acked-by:
Eli Cohen <eli@mellanox.com>
-
Alex Dewar authored
If the kernel is unable to allocate memory for the variable dmr then err will be returned without being set. Set err to -ENOMEM in this case. Fixes: 94abbccd ("vdpa/mlx5: Add shared memory registration code") Addresses-Coverity: ("Uninitialized variables") Signed-off-by:
Alex Dewar <alex.dewar@gmx.co.uk> Link: https://lore.kernel.org/r/20200806185625.67344-1-alex.dewar@gmx.co.ukSigned-off-by:
-
Michael S. Tsirkin authored
The patch adding the iommu lock did not initialize it. The struct is zero-initialized so this is mostly a problem when using lockdep. Reported-by:
kernel test robot <rong.a.chen@intel.com> Cc: Max Gurtovoy <maxg@mellanox.com> Fixes: 0ea9ee43 ("vdpasim: protect concurrent access to iommu iotlb") Signed-off-by:
-
- 05 Aug, 2020 37 commits
-
-
Michael S. Tsirkin authored
Apparently, on parisc le16_to_cpu returns an int. virtio_cread_le is very strict about type sizes so it causes a warning. Fix it up by casting to the correct type. Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
-
Eli Cohen authored
Add a front end VDPA driver that registers in the VDPA bus and provides networking to a guest. The VDPA driver creates the necessary resources on the VF it is driving such that data path will be offloaded. Notifications are being communicated through the driver. Currently, only VFs are supported. In subsequent patches we will have devlink support to control which VF is used for VDPA and which function is used for regular networking. Reviewed-by:
Parav Pandit <parav@mellanox.com> Signed-off-by:
-
Eli Cohen authored
Add code to support registering address space region for the device. The virtio driver can run as either: 1. Guest virtio driver 2. Userspace virtio driver on the host 3. Kernel virtio driver on the host In any case a memory key object is required to provide access to memory for the device. This code will be shared by network or block driver implementations. Reviewed-by:
-
Eli Cohen authored
Following patches introduce VDPA network driver for Mellanox Connectx6 devices. This patch provides functionality that will be used by those patches. Reviewed-by:
-
Eli Cohen authored
Keep all vdpa related hardware definitions in this file. Reviewed-by:
-
Eli Cohen authored
Modify get_vq_state() so it returns an error code. In case of hardware acceleration, the available index may be retrieved from the device, an operation that can possibly fail. Reviewed-by:
-
Eli Cohen authored
For now VQ state involves 16 bit available index value encoded in u64 variable. In the future it will be extended to contain more fields. Use struct to contain the state, now containing only a single u16 for the available index. In the future we can add fields to this struct. Reviewed-by:
-
Max Gurtovoy authored
This will enable vdpa providers to add support for multi queue feature and publish it to upper layers (vhost and virtio). Signed-off-by:
Max Gurtovoy <maxg@mellanox.com> Reviewed-by:
-
Jason Wang authored
The vDPA simulator support both set_map() and dma_map()/dma_unmap() operations. But vhost-vdpa can only use one of them. So this patch introduce a module parameter (batch_mapping) that let vpda_sim to support only one of those dma operations. The batched mapping via set_map() is enabled by default. Signed-off-by:
-
Jason Wang authored
This patches extend the vhost IOTLB API to accept batch updating hints form userspace. When userspace wants update the device IOTLB in a batch, it may do: 1) Write vhost_iotlb_msg with VHOST_IOTLB_BATCH_BEGIN flag 2) Perform a batch of IOTLB updating via VHOST_IOTLB_UPDATE/INVALIDATE 3) Write vhost_iotlb_msg with VHOST_IOTLB_BATCH_END flag Vhost-vdpa may decide to batch the IOMMU/IOTLB updating in step 3 when vDPA device support set_map() ops. This is useful for the vDPA device that want to know all the mappings to tweak their own DMA translation logic. For vDPA device that doesn't require set_map(), no behavior changes. This capability is advertised via VHOST_BACKEND_F_IOTLB_BATCH capability. Signed-off-by:
-
Jason Wang authored
This patch makes userspace can get and set backend features to vhost-vdpa. Signed-off-by:
Cindy Lu <lulu@redhat.com> Signed-off-by:
-
Jason Wang authored
Move the backend features setting/getting from net.c to vhost.c to be reused by vhost-vdpa. Signed-off-by:
-
Jason Wang authored
Switch to use 'switch' to make the codes more easier to be extended. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linuxMichael S. Tsirkin authored
Merge shared code that's necessary for mlx5 vdpa bits to build. The branch itself includes a small number of patches and is also independently merged by a couple of other trees. That shouldn't cause any conflicts by itself. Saeed Mahameed <saeedm@mellanox.com> says: --- mlx5-next is a very small branch based on a very early rc that includes mlx5 shared stuff between rdma and net-next, and now virtio as well. --- Signed-off-by: -
Zhu Lingshan authored
IRQ of a vq is not expected to be changed in a DRIVER_OK ~ !DRIVER_OK period for irq offloading purposes. Place this comment at the side of bus ops get_vq_irq than in set_status in vhost_vdpa. Signed-off-by:
Zhu Lingshan <lingshan.zhu@intel.com> Link: https://lore.kernel.org/r/20200804102123.69978-1-lingshan.zhu@intel.comSigned-off-by:
-
Liao Pingfang authored
Fix the comment of virtio_pci_find_capability() by adding missing comment for the last parameter: bars. Fixes: 59a5b0f7 ("virtio-pci: alloc only resources actually used.") Signed-off-by:
Liao Pingfang <liao.pingfang@zte.com.cn> Signed-off-by:
Yi Wang <wang.yi59@zte.com.cn> Link: https://lore.kernel.org/r/1596455545-43556-1-git-send-email-wang.yi59@zte.com.cnSigned-off-by:
-
Zhu Lingshan authored
If failed to connect, there is no need to start consumer nor producer. Signed-off-by:
-
Zhu Lingshan authored
This commit implemented vdpa_config_ops.get_vq_irq() in ifcvf, and initialized vq irq to -EINVAL. So that ifcvf can report irq number of a vq, or -EINVAL if the vq is not assigned an irq number. Signed-off-by:
-
Zhu Lingshan authored
This patch introduce a set of functions for setup/unsetup and update irq offloading respectively by register/unregister and re-register the irq_bypass_producer. With these functions, this commit can setup/unsetup irq offloading through setting DRIVER_OK/!DRIVER_OK, and update irq offloading through SET_VRING_CALL. Signed-off-by:
-
Zhu Lingshan authored
This commit adds a new function get_vq_irq() in struct vdpa_config_ops, which will return the irq number of a virtqueue. Signed-off-by:
-
Zhu Lingshan authored
vDPA devices has dedicated backed hardware like passthrough-ed devices. Then it is possible to setup irq offloading to vCPU for vDPA devices. Thus this patch tries to manipulated assigned device counters by kvm_arch_start/end_assignment() in irqbypass manager, so that assigned devices could be detected in update_pi_irte() We will increase/decrease the assigned device counter in kvm/x86. Both vDPA and VFIO would go through this code path. Only X86 uses these counters and kvm_arch_start/end_assignment(), so this code path only affect x86 for now. Signed-off-by:
-
Zhu Lingshan authored
This commit introduces struct vhost_vring_call which replaced raw struct eventfd_ctx *call_ctx in struct vhost_virtqueue. Besides eventfd_ctx, it contains a spin lock and an irq_bypass_producer in its structure. Signed-off-by:
-
Gustavo A. R. Silva authored
Make use of the flex_array_size() helper to calculate the size of a flexible array member within an enclosing structure. This helper offers defense-in-depth against potential integer overflows, while at the same time makes it explicitly clear that we are dealing with a flexible array member. Signed-off-by:
Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://lore.kernel.org/r/20200731130956.GA30525@embeddedorSigned-off-by:
-
Max Gurtovoy authored
Iommu iotlb can be accessed by different cores for performing IO using multiple virt queues. Add a spinlock to synchronize iotlb accesses. This could be easily reproduced when using more than 1 pktgen threads to inject traffic to vdpa simulator. Fixes: 2c53d0f6("vdpasim: vDPA device simulator") Cc: stable@vger.kernel.org Signed-off-by:
-
Jason Wang authored
We used to have a per device feature whitelist to filter out the unsupported virtio features. But this seems unnecessary since: - the main idea behind feature whitelist is to block control vq feature until we finalize the control virtqueue API. But the current vhost-vDPA uAPI is sufficient to support control virtqueue. For device that has hardware control virtqueue, the vDPA device driver can just setup the hardware virtqueue and let userspace to use hardware virtqueue directly. For device that doesn't have a control virtqueue, the vDPA device driver need to use e.g vringh to emulate a software control virtqueue. - we don't do it in virtio-vDPA driver So remove this limitation. Signed-off-by:
-
Mao Wenan authored
The loop may exist if vq->broken is true, virtqueue_get_buf_ctx_packed or virtqueue_get_buf_ctx_split will return NULL, so virtnet_poll will reschedule napi to receive packet, it will lead cpu usage(si) to 100%. call trace as below: virtnet_poll virtnet_receive virtqueue_get_buf_ctx virtqueue_get_buf_ctx_packed virtqueue_get_buf_ctx_split virtqueue_napi_complete virtqueue_poll //return true virtqueue_napi_schedule //it will reschedule napi to fix this, return false if vq is broken in virtqueue_poll. Signed-off-by:
Mao Wenan <wenan.mao@linux.alibaba.com> Acked-by:
-
Michael S. Tsirkin authored
Speed and duplex config fields depend on VIRTIO_NET_F_SPEED_DUPLEX which being 63>31 depends on VIRTIO_F_VERSION_1. Accordingly, use LE accessors for these fields. Reported-by:
Cornelia Huck <cohuck@redhat.com> Signed-off-by:
-
Michael S. Tsirkin authored
All drivers now use virtio_cread/write_le for LE config space fields. Drop LE option from virtio_cread/write, only leaving the option to access transitional fields. Signed-off-by: -
Michael S. Tsirkin authored
Virtio iommu is modern-only. Use LE accessors for config space. Signed-off-by: -
Michael S. Tsirkin authored
Virtio mem is modern-only. Use LE accessors for config space. Signed-off-by: -
Michael S. Tsirkin authored
Virtgpu is modern-only. Use LE accessors for config space. Signed-off-by: -
Michael S. Tsirkin authored
Virtio pmem is modern-only. Use LE accessors for config space. Signed-off-by: -
Michael S. Tsirkin authored
Virtio crypto is modern-only. Use LE accessors for config space. Signed-off-by: -
Michael S. Tsirkin authored
Virtio fs is modern-only. Use LE accessors for config space. Signed-off-by: -
Michael S. Tsirkin authored
Virtio input is modern-only. Use LE accessors for config space. Signed-off-by: -
Michael S. Tsirkin authored
Balloon is LE, it's cleaner to access it as such directly. Signed-off-by: -
Michael S. Tsirkin authored
Mirrors virtio_cread_feature but for LE fields. Signed-off-by:
-
