- 02 Oct, 2018 8 commits
-
-
Sehro Rautenkranz authored
Replace Kconfig help header and text to match other modules. Issue found by checkpatch. Spacing adjusted to match Documentation/process/coding-style.rst. Issue reported by rdunlap@infradead.org. Reported-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
Sehro Rautenkranz <sehro@sehro.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Colin Ian King authored
There are extraneous parantheses that are causing clang to produce a warning so remove these. Clean up 3 clang warnings: equality comparison with extraneous parentheses [-Wparentheses-equality] Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Dafna Hirschfeld authored
Remove unnecessary parentheses between 'address-of' operators and struct members. Issues found with checkpatch.pl Signed-off-by:
Dafna Hirschfeld <dafna3@gmail.com> Acked-by:
Julia Lawall <julia.lawall@lip6.fr> Signed-off-by:
-
Nathan Chancellor authored
Clang emits the following warning: drivers/staging/rtl8723bs/os_dep/sdio_intf.c:25:36: warning: variable 'acpi_ids' is not needed and will not be emitted [-Wunneeded-internal-declaration] static const struct acpi_device_id acpi_ids[] = { ^ 1 warning generated. Mark acpi_ids with the attribute __used, which makes it clear to Clang that we don't want this warning while not inhibiting Clang's dead code elimination from removing the unreferenced internal symbol when moving the data to the globally available symbol with MODULE_DEVICE_TABLE. $ nm -S drivers/staging/rtl8723bs/os_dep/sdio_intf.o | grep acpi 0000000000000000 0000000000000040 R __mod_acpi__acpi_ids_device_table Link: https://github.com/ClangBuiltLinux/linux/issues/169Suggested-by:Nick Desaulniers <ndesaulniers@google.com> Signed-off-by:
Nathan Chancellor <natechancellor@gmail.com> Signed-off-by:
-
Dafna Hirschfeld authored
Replace calls to `printk` with `dev_info` and `pr_err` Issues found with checkpatch.pl Signed-off-by:
-
Dafna Hirschfeld authored
Replace comparisons of a variable 'x' to NULL with either 'x' or '!x'. Issues found with checkpatch.pl Signed-off-by:
-
Dafna Hirschfeld authored
Remove unnecessary braces from one line 'if' statements. Issues found with checkpatch.pl Signed-off-by:
-
Greg Kroah-Hartman authored
Merge tag 'iio-for-4.20b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Jonathan writes: Second set of IIO new device support features and cleanup for the 4.20 cycle. One merge commit in here to bring in the SPI_CS_WORD flag patches that are also going via the SPI tree. There are a few more fixes than normal for a pull targetting the next merge window. These are all long term issues and as we are late in the cycle, they can wait. New device support * ad7606 - Add support fo the ad7605-4 driver. This driver is still in staging but is heading in the right direction to graduate, motivated partly by the requirement for this device support. * ST VL53L0X ToF ranging sensor - New minimal driver. Interrupt support to follow. New features * SPI_CS_WORD optimization allows long transfers with the chip select toggled every 16bits. There is a software fallback as well to let drivers not care about whether the hardware supports it. * bh1750 - Device tree support and bindings. * ti-ads7950 - Use the SPI_CS_WORD optmization to save lots of cpu cycles (assuming the hardware supports it) Fixes and cleanups * ad5064 - Fix some long incorrect regulator error handling that preventing enabling the internal regulator. * ad7606 - The ad7606 doesn't actually have a 2.5V range and the values provided for scale have always been wrong. Fix them. - Drop some wrong kernel-doc (things that don't exist) - Add missing kernel-doc * at91-adc - Fixing missing ack of dataready on sysfs channel reads to avoid spurious interrupts. - Fix a wrong channel numbers in triggered_buffer_mode * hmc5843 - Fix incorrect part number in a comment. * imx25-gcq - Fix a device_node leak in an error path. * meson-saradc - Drop an unused and pointless define. - Use of_device_get_match_data instead of opencoding - Tidy up how meson_sar_adc_param is accessed. - Rework prior to adding some temperature sensor support. * tag 'iio-for-4.20b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: iio: ad5064: Fix regulator handling iio: adc: meson-saradc: use the address attribute from iio_chan_spec iio: adc: meson-saradc: do not use meson_sar_adc_iio_channels directly iio: adc: at91: fix wrong channel number in triggered buffer mode iio: adc: at91: fix acking DRDY irq on simple conversions iio: adc: meson-saradc: simplify access to meson_sar_adc_param iio: adc: meson-saradc: use of_device_get_match_data iio: adc: meson-saradc: remove #define MESON_SAR_ADC_DELTA_10_TS_C_SHIFT iio: light: bh1750: Add device tree support dt-bindings: iio: light: bh1750: Add device tree binding documentation staging:iio:ad7606: Add support for the ad7605-4 iio: proximity: Add driver support for ST's VL53L0X ToF ranging sensor. staging:iio:ad7606: update structs with doc annotations iio: magnetometer: hmc5843: Fixed a comment error. iio: adc: imx25-gcq: Fix leak of device_node in mx25_gcq_setup_cfgs() iio: adc: ti-ads7950: use SPI_CS_WORD to reduce CPU usage spi: add software implementation for SPI_CS_WORD spi: add new SPI_CS_WORD flag staging:iio:ad7606: Remove incorrect kernel doc annotations staging:iio:ad7606: fix voltage scales
-
- 29 Sep, 2018 25 commits
-
-
Hans de Goede authored
Store fbhelper and afb struct directly in vbox_private and use drm_fb_helper_fbdev_setup to replace vbox_fbdev_init, note we cannot use drm_fb_helper_fbdev_teardown since we use a private framebuffer for the fbdev. And replace vbox_driver_lastclose with drm_fb_helper_lastclose. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Hans de Goede authored
vbox_mode_valid always returns MODE_OK, which is also the default if no mode_valid callback is defined. vbox_best_single_encoder chains to drm_encoder_find, the drm-core will call drm_encoder_find itself if there is no best_encoder call back. Signed-off-by:
-
Hans de Goede authored
Extend our planes atomic_check callbacks to be more thorough by calling the drm_atomic_helper_check_plane_state helper. Signed-off-by:
-
Hans de Goede authored
Replace vbox_crtc_commit and vbox_crtc_disable with vbox_crtc_atomic_[en|dis]able which are the preferred callbacks for these for atomic drivers. Signed-off-by:
-
Hans de Goede authored
Atomic modesetting does not use the traditional dpms call backs, instead we should check crtc_state->active. Signed-off-by:
-
Hans de Goede authored
Restore page-flip support now that the atomic conversion is complete. Since the mode parameter to vbox_crtc_set_base_and_mode() now never is NULL call drm_atomic_crtc_needs_modeset() to check if we need to check for input-mapping changes, to avoid doing unnecesarry work on a flip. And hookup the drm_atomic_helper_page_flip helper to implement the page_flip callback. Signed-off-by:
-
Hans de Goede authored
Now that the state objects are wired up, we can: 1) Move to the final atomic handlers 2) Wire up atomic set_config helper 3) Switch to drm_mode_config_helper_suspend/resume for suspend/resume 4) Enable atomic modesetting ioctl This is all done in one commit because doing this piecemeal leads to an intermediate state which triggers WARN_ONs in the atomic code because e.g. plane->fb is still being set. Signed-off-by:
-
Hans de Goede authored
Once we are fully atomic plane->fb will always be NULL and we also should not access things like crtc->enabled and crt->[hw]mode. Now that we've wired up the state object handlers, we always have a plane_state and crtc_state so change the code referencing plane->fb and crtc->* to use the data from the plane_state and crt_state instead. Signed-off-by:
-
Hans de Goede authored
Wire up state object handlers for the crtc-s and the planes, call drm_mode_config_reset() after creating all the crtc-s and encoders and remove the legacy drm_helper_disable_unused_functions() call. Signed-off-by:
-
Hans de Goede authored
Use drm_plane_helpers for the primary plane and replace our custom mode_set callback with drm_helper_crtc_mode_set. Signed-off-by:
-
Hans de Goede authored
In preparation for atomic conversion, let's use the transitional atomic helpers drm_plane_helper_update/disable. Signed-off-by:
-
Hans de Goede authored
When setting a mode we not only pass the mode to the hypervisor, but also information on how to map / translate input coordinates for the emulated USB tablet. This input-mapping may change when the mode on *another* crtc changes. This means that sometimes we must do a modeset on other crtc-s then the one being changed to update the input-mapping. Including crtc-s which may be disabled inside the guest (shown as a black window on the host unless closed by the user). With atomic modesetting the mode-info of disabled crtcs gets zeroed yet we need it when updating the input-map to avoid resizing the window as a side effect of a mode_set on another crtc. This commit adds caching of the mode info into out private vbox_crtc struct so that we always have the info at hand when we need it. Signed-off-by:
-
Hans de Goede authored
drm_mode_page_flip_ioctl() cannot deal with the in between phase of the transitioning to atomic modeset support. Once we start using drm_helper_crtc_mode_set(), we start setting plane->state on the primary plane. But we are not fully atomic yet so then set both plane-state->fb and plane->fb. If both plane-state->fb and plane->fb are set drm_mode_page_flip_ioctl() gets confused and stops calling drm_framebuffer_get() on the new fb while still calling drm_framebuffer_put() on the old fb. The current page_flip implementation expects drm_mode_page_flip_ioctl() to take care of both and once we switch to drm_atomic_helper_page_flip() that will expect neither to be done, taking care of both itself. So for the transition we need to remove page_flip support and then after the transition is complete and we set DRIVER_ATOMIC in our driver_features, we can start using drm_atomic_helper_page_flip(). Signed-off-by:
-
Hans de Goede authored
All the encoder_helper_funcs are optional, and even setting the drm_encoder_helper_funcs vtable itself is optional and may be left out when not using any of the helper funcs, so lets drop all of this. Signed-off-by:
-
Hans de Goede authored
This cleanups 2 things: 1) The first time we loop over the crtc-s, to compare framebuffers, fb1 may get set to NULL by the fb1 = CRTC_FB(crtci); statement and then we call to_vbox_framebuffer() on it. The result of this call is only used for an address comparison, so we don't end up dereferencing the bad pointer, but still it is better to not do this. 2) Since we already figure out the first crtc with a fb in the first loop and store that in fb1, there is no need to loop over the crtc-s again just to find the first crtc with a fb again. Signed-off-by:
-
Lars-Peter Clausen authored
The correct way to handle errors returned by regualtor_get() and friends is to propagate the error since that means that an regulator was specified, but something went wrong when requesting it. For handling optional regulators, e.g. when the device has an internal vref, regulator_get_optional() should be used to avoid getting the dummy regulator that the regulator core otherwise provides. Signed-off-by:
Lars-Peter Clausen <lars@metafoo.de> Cc: <Stable@vger.kernel.org> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
Martin Blumenstingl authored
Until now the "channel" number is identical to how the channel is identified inside the (FIFO) registers. In our case we have eight channels and the hardware also has eight inputs. However, there are two special inputs: - channel 6 can select between the SAR_ADC_CH6 pad and the chip's internal temperature sensor - channel 7 can select between SAR_ADC_CH7 and VSS, VDD / 4, VDD / 2, VDD * 3 / 4 and VDD. When programming the registers to read for example the temperature sensor we have to select FIFO channel 6, set the correct bit which muxes channel 6 to the temperature sensor and then start the ADC measurement for channel 6 as usual. When we add support for the temperature sensor the driver has to know about that it has to use FIFO channel 6 to measure using the chip's internal temperature sensor. However, in that case the iio_chan_spec channel will not be 6 because this is already used for the SAR_ADC_CH6 pad input. Thus we use iio_chan_spec's address field to store the FIFO channel number for each channel. Signed-off-by:
Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by:
-
Martin Blumenstingl authored
In the future we may support two different channel sets: - one which includes the voltage pads and the temperature sensor output (for Meson8, Meson8b and Meson8m2) - one which only includes the voltage pads (GXBB, GXL, GXM and AXG) Channel 7 has a special function on all of these platforms. However, since we will have different channel array definitions we want our code to always use whatever channels struct iio_dev uses. No functional changes for now. This is the preparation for adding temperature sensor support to this driver. Signed-off-by:
-
Eugen Hristev authored
When channels are registered, the hardware channel number is not the actual iio channel number. This is because the driver is probed with a certain number of accessible channels. Some pins are routed and some not, depending on the description of the board in the DT. Because of that, channels 0,1,2,3 can correspond to hardware channels 2,3,4,5 for example. In the buffered triggered case, we need to do the translation accordingly. Fixed the channel number to stop reading the wrong channel. Fixes: 0e589d5f ("ARM: AT91: IIO: Add AT91 ADC driver.") Cc: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by:
Eugen Hristev <eugen.hristev@microchip.com> Acked-by:
Ludovic Desroches <ludovic.desroches@microchip.com> Cc: <Stable@vger.kernel.org> Signed-off-by:
-
Eugen Hristev authored
When doing simple conversions, the driver did not acknowledge the DRDY irq. If this irq status is not acked, it will be left pending, and as soon as a trigger is enabled, the irq handler will be called, it doesn't know why this status has occurred because no channel is pending, and then it will go int a irq loop and board will hang. To avoid this situation, read the LCDR after a raw conversion is done. Fixes: 0e589d5f ("ARM: AT91: IIO: Add AT91 ADC driver.") Cc: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by:
-
Martin Blumenstingl authored
Commit 053ffe3c ("iio: adc: meson-saradc: squash and share the common adc platform data") put all the data which is needed at runtime from struct meson_sar_adc_data to a new struct meson_sar_adc_param so we can re-use the platform specific configuration without having to duplicate everything just to change the name. The only place where struct meson_sar_adc_data is now needed is the _probe function which has to pass the name to the iio_dev. All other functions only need access to struct meson_sar_adc_param. This means we can simplify struct meson_sar_adc_priv. The goal of this patch is to make the code a bit easier to read since this removes one level of nesting. No functional changes intended. Signed-off-by:
-
Martin Blumenstingl authored
This simplifies our _probe function by using of_device_get_match_data instead of open-coding it. No functional changes. Signed-off-by:
-
Martin Blumenstingl authored
This define is of no use because the driver is avoiding shifting bits by itself but using FIELD_GET/FIELD_PREP (which are using bit masks) instead. There is already a MESON_SAR_ADC_DELTA_10_TS_C_MASK bit mask so MESON_SAR_ADC_DELTA_10_TS_C_SHIFT was redundant. Signed-off-by:
-
ryang authored
Add device tree support for ROHM BH1750 series ambient light sensors. Signed-off-by:
ryang <decatf@gmail.com> Signed-off-by:
-
ryang authored
Document device tree bindings for ROHM BH1750 ambient light sensor driver. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
- 28 Sep, 2018 7 commits
-
-
Tim Collier authored
p80211metadef.h and p80211metastruct.h both have comments stating they are autogenerated and should not be edited. However, neither is generated during build and both have had numerous manual edits since the driver has been in staging. Signed-off-by:
Tim Collier <osdevtc@gmail.com> Signed-off-by:
-
Tim Collier authored
The reformatting of case blocks has shortened some lines such that previously split lines can be rejoined without exceeding 80 characters. Rejoined those lines. Signed-off-by:
-
Tim Collier authored
For switch statements with case blocks make the format consistent by applying K&R formatting, a space before the opening brace, single indentation of contained code, break inside the block and closing brace aligned with case. Signed-off-by:
-
Tim Collier authored
Combine previously split lines for an assignment; now fits in 80 characters as the name of the macro being assigned was shortened. Signed-off-by:
-
Tim Collier authored
Rename DIDmib_p2_p2MAC_p2CurrentTxRate in p80211metadef.h to DIDMIB_P2_MAC_CURRENTTXRATE to fix "Avoid CamelCase" message from checkpatch and conform to the coding style guidelines. Also shorten name by removing repeated use of "P2" to ease readability and reduce long lines. Signed-off-by:
-
Tim Collier authored
Rename DIDmib_p2_p2MAC in p80211metadef.h to DIDMIB_P2_MAC to fix "Avoid CamelCase" message from checkpatch and conform to the coding style guidelines. Also shorten name by removing repeated use of "P2" to ease readability and reduce long lines. Signed-off-by:
-
Tim Collier authored
Rename DIDmib_p2_p2NIC_p2PRISupRange in p80211metadef.h to DIDMIB_P2_NIC_PRISUPRANGE to fix "Avoid CamelCase" message from checkpatch and conform to the coding style guidelines. Also shorten name by removing repeated use of "P2" to ease readability and reduce long lines. Signed-off-by:
-
