- 28 Jan, 2016 36 commits
-
-
Andrew Elble authored
commit 361cad3c upstream. We've seen this in a packet capture - I've intermixed what I think was going on. The fix here is to grab the so_lock sooner. 1964379 -> #1 open (for write) reply seqid=1 1964393 -> #2 open (for read) reply seqid=2 __nfs4_close(), state->n_wronly-- nfs4_state_set_mode_locked(), changes state->state = [R] state->flags is [RW] state->state is [R], state->n_wronly == 0, state->n_rdonly == 1 1964398 -> #3 open (for write) call -> because close is already running 1964399 -> downgrade (to read) call seqid=2 (close of #1) 1964402 -> #3 open (for write) reply seqid=3 __update_open_stateid() nfs_set_open_stateid_locked(), changes state->flags state->flags is [RW] state->state is [R], state->n_wronly == 0, state->n_rdonly == 1 new sequence number is exposed now via nfs4_stateid_copy() next step would be update_open_stateflags(), pending so_lock 1964403 -> downgrade reply seqid=2, fails with OLD_STATEID (close of #1) nfs4_close_prepare() gets so_lock and recalcs flags -> send close 1964405 -> downgrade (to read) call seqid=3 (close of #1 retry) __update_open_stateid() gets so_lock * update_open_stateflags() updates state->n_wronly. nfs4_state_set_mode_locked() updates state->state state->flags is [RW] state->state is [RW], state->n_wronly == 1, state->n_rdonly == 1 * should have suppressed the preceding nfs4_close_prepare() from sending open_downgrade 1964406 -> write call 1964408 -> downgrade (to read) reply seqid=4 (close of #1 retry) nfs_clear_open_stateid_locked() state->flags is [R] state->state is [RW], state->n_wronly == 1, state->n_rdonly == 1 1964409 -> write reply (fails, openmode) Signed-off-by:
Andrew Elble <aweits@rit.edu> Signed-off-by:
Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by:
Kamal Mostafa <kamal@canonical.com>
-
Chen-Yu Tsai authored
commit 768acf46 upstream. The driver allocates the spinlock but fails to initialize it correctly. The kernel reports a BUG indicating bad spinlock magic when spinlock debugging is enabled. Call spin_lock_init() on it to initialize it correctly. Fixes: b4e3e59f ("[media] rc: add sunxi-ir driver") Signed-off-by:
Chen-Yu Tsai <wens@csie.org> Acked-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@osg.samsung.com> Signed-off-by:
-
Vegard Nossum authored
commit b0918d9f upstream. udf_next_aext() just follows extent pointers while extents are marked as indirect. This can loop forever for corrupted filesystem. Limit number the of indirect extents we are willing to follow in a row. [JK: Updated changelog, limit, style] Signed-off-by:
Vegard Nossum <vegard.nossum@oracle.com> Cc: Jan Kara <jack@suse.com> Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Adrian Hunter authored
commit 5c671c41 upstream. sdhci has a legacy facility to prevent runtime suspend if the bus power is on. This is needed in cases where the power to the card is dependent on the bus power. It is controlled by a pair of functions: sdhci_runtime_pm_bus_on() and sdhci_runtime_pm_bus_off(). These functions use a boolean variable 'bus_on' to ensure changes are always paired. There is an additional check for 'runtime_suspended' which is the problem. In fact, its use is ill-conceived as the only requirement for the logic is that 'on' and 'off' are paired, which is actually broken by the check, for example if the bus power is turned on during runtime resume. So remove the check. Signed-off-by:
Adrian Hunter <adrian.hunter@intel.com> Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Adrian Hunter authored
commit 347ea32d upstream. SDHCI has built-in DMA called ADMA2. ADMA2 uses a descriptor table to define DMA scatter-gather. Each desciptor can specify a data length up to 65536 bytes, however the length field is only 16-bits so zero means 65536. Consequently, putting zero when the size is zero must not be allowed. This patch fixes one case where zero data length could be set inadvertently. The problem happens because unaligned data gets split and the code did not consider that the remaining aligned portion might be zero length. That case really only happens for SDIO because SD and eMMC cards transfer blocks that are invariably sector- aligned. For SDIO, access to function registers is done by data transfer (CMD53) when the register is bigger than 1 byte. Generally registers are 4 bytes but 2-byte registers are possible. So DMA of 4 bytes or less can happen. When 32-bit DMA is used, the data alignment must be 4, so 4-byte transfers won't casue a problem, but a 2-byte transfer could. However with the introduction of 64-bit DMA, the data alignment for 64-bit DMA was made 8 bytes, so all 4-byte transfers not on 8-byte boundaries get "split" into a 4-byte chunk and a 0-byte chunk, thereby hitting the bug. In fact, a closer look at the SDHCI specs indicates that only the descriptor table requires 8-byte alignment for 64-bit DMA. That will be dealt with in a separate patch, but the potential for a 2-byte access remains, so this fix is needed anyway. Signed-off-by:
-
Adrian Hunter authored
commit d9bfbb95 upstream. The 'ocr' parameter passed to mmc_set_signal_voltage() defines the power-on voltage used when power cycling after a failure to set the voltage. However, in the case of mmc_sdio_init_card(), the value passed has the R4_18V_PRESENT flag set which is not valid for power-on and results in an invalid vdd. Fix by passing the card's ocr value which does not have the flag. Signed-off-by:
-
Alex Deucher authored
commit 0eb1c3d4 upstream. Combine the two quirks. bug: https://bugzilla.kernel.org/show_bug.cgi?id=109481Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Felix Kuehling authored
commit 42ef344c upstream. eoffset is sometimes treated as the last address inside the address range, and sometimes as the first address outside the range. This was resulting in errors when a test filled up the entire address space. Make it consistent to always be the last address within the range. Also fixed related errors when checking the VA limit and in radeon_vm_fence_pts. Signed-off-by:
Felix.Kuehling <Felix.Kuehling@amd.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
Lorenzo Pieralisi authored
commit 60792ad3 upstream. The pmuserenr_el0 register value is architecturally UNKNOWN on reset. Current kernel code resets that register value iff the core pmu device is correctly probed in the kernel. On platforms with missing DT pmu nodes (or disabled perf events in the kernel), the pmu is not probed, therefore the pmuserenr_el0 register is not reset in the kernel, which means that its value retains the reset value that is architecturally UNKNOWN (system may run with eg pmuserenr_el0 == 0x1, which means that PMU counters access is available at EL0, which must be disallowed). This patch adds code that resets pmuserenr_el0 on cold boot and restores it on core resume from shutdown, so that the pmuserenr_el0 setup is always enforced in the kernel. Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by:
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Will Deacon authored
commit d8d23fa0 upstream. We don't want to expose the DCC to userspace, particularly as there is a kernel console driver for it. This patch resets mdscr_el1 to disable userspace access to the DCC registers on the cold boot path. Signed-off-by:
-
Thomas Gleixner authored
commit fb75a428 upstream. If the proxy lock in the requeue loop acquires the rtmutex for a waiter then it acquired also refcount on the pi_state related to the futex, but the waiter side does not drop the reference count. Add the missing free_pi_state() call. Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Darren Hart <darren@dvhart.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Bhuvanesh_Surachari@mentor.com Cc: Andy Lowe <Andy_Lowe@mentor.com> Link: http://lkml.kernel.org/r/20151219200607.178132067@linutronix.deSigned-off-by:
-
Nikolay Borisov authored
commit 18d03e8c upstream. When a thin pool is being destroyed delayed work items are cancelled using cancel_delayed_work(), which doesn't guarantee that on return the delayed item isn't running. This can cause the work item to requeue itself on an already destroyed workqueue. Fix this by using cancel_delayed_work_sync() which guarantees that on return the work item is not running anymore. Fixes: 905e51b3 ("dm thin: commit outstanding data every second") Fixes: 85ad643b ("dm thin: add timeout to stop out-of-data-space mode holding IO forever") Signed-off-by:
Nikolay Borisov <kernel@kyup.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Mike Snitzer authored
commit 51216778 upstream. Remove the unused struct block_op pointer that was inadvertantly introduced, via cut-and-paste of previous brb_op() code, as part of commit 50dd842a. (Cc'ing stable@ because commit 50dd842a did) Fixes: 50dd842a ("dm space map metadata: fix ref counting bug when bootstrapping a new space map") Reported-by:
David Binderman <dcb314@hotmail.com> Signed-off-by:
-
Boqun Feng authored
commit 81d7a329 upstream. According to memory-barriers.txt, xchg*, cmpxchg* and their atomic_ versions all need to be fully ordered, however they are now just RELEASE+ACQUIRE, which are not fully ordered. So also replace PPC_RELEASE_BARRIER and PPC_ACQUIRE_BARRIER with PPC_ATOMIC_ENTRY_BARRIER and PPC_ATOMIC_EXIT_BARRIER in __{cmp,}xchg_{u32,u64} respectively to guarantee fully ordered semantics of atomic{,64}_{cmp,}xchg() and {cmp,}xchg(), as a complement of commit b97021f8 ("powerpc: Fix atomic_xxx_return barrier semantics") This patch depends on patch "powerpc: Make value-returning atomics fully ordered" for PPC_ATOMIC_ENTRY_BARRIER definition. Signed-off-by:
Boqun Feng <boqun.feng@gmail.com> Reviewed-by:
Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Boqun Feng authored
commit 49e9cf3f upstream. According to memory-barriers.txt: > Any atomic operation that modifies some state in memory and returns > information about the state (old or new) implies an SMP-conditional > general memory barrier (smp_mb()) on each side of the actual > operation ... Which mean these operations should be fully ordered. However on PPC, PPC_ATOMIC_ENTRY_BARRIER is the barrier before the actual operation, which is currently "lwsync" if SMP=y. The leading "lwsync" can not guarantee fully ordered atomics, according to Paul Mckenney: https://lkml.org/lkml/2015/10/14/970 To fix this, we define PPC_ATOMIC_ENTRY_BARRIER as "sync" to guarantee the fully-ordered semantics. This also makes futex atomics fully ordered, which can avoid possible memory ordering problems if userspace code relies on futex system call for fully ordered semantics. Fixes: b97021f8 ("powerpc: Fix atomic_xxx_return barrier semantics") Signed-off-by:
-
Will Deacon authored
commit 32d63978 upstream. In paging_init, we allocate the zero page, memset it to zero and then point TTBR0 to it in order to avoid speculative fetches through the identity mapping. In order to guarantee that the freshly zeroed page is indeed visible to the page table walker, we need to execute a dsb instruction prior to writing the TTBR. Signed-off-by:
-
Borislav Petkov authored
commit fcd5c4dd upstream. EDAC workqueue destruction is really fragile. We cancel delayed work but if it is still running and requeues itself, we still go ahead and destroy the workqueue and the queued work explodes when workqueue core attempts to run it. Make the destruction more robust by switching op_state to offline so that requeuing stops. Cancel any pending work *synchronously* too. EDAC i7core: Driver loaded. general protection fault: 0000 [#1] SMP CPU 12 Modules linked in: Supported: Yes Pid: 0, comm: kworker/0:1 Tainted: G IE 3.0.101-0-default #1 HP ProLiant DL380 G7 RIP: 0010:[<ffffffff8107dcd7>] [<ffffffff8107dcd7>] __queue_work+0x17/0x3f0 < ... regs ...> Process kworker/0:1 (pid: 0, threadinfo ffff88019def6000, task ffff88019def4600) Stack: ... Call Trace: call_timer_fn run_timer_softirq __do_softirq call_softirq do_softirq irq_exit smp_apic_timer_interrupt apic_timer_interrupt intel_idle cpuidle_idle_call cpu_idle Code: ... RIP __queue_work RSP <...> Signed-off-by:
Borislav Petkov <bp@suse.de> Signed-off-by:
-
Borislav Petkov authored
commit 12e26969 upstream. I get the splat below when modprobing/rmmoding EDAC drivers. It happens because bus->name is invalid after bus_unregister() has run. The Code: section below corresponds to: .loc 1 1108 0 movq 672(%rbx), %rax # mci_1(D)->bus, mci_1(D)->bus .loc 1 1109 0 popq %rbx # .loc 1 1108 0 movq (%rax), %rdi # _7->name, jmp kfree # and %rax has some funky stuff 2030203020312030 which looks a lot like something walked over it. Fix that by saving the name ptr before doing stuff to string it points to. general protection fault: 0000 [#1] SMP Modules linked in: ... CPU: 4 PID: 10318 Comm: modprobe Tainted: G I EN 3.12.51-11-default+ #48 Hardware name: HP ProLiant DL380 G7, BIOS P67 05/05/2011 task: ffff880311320280 ti: ffff88030da3e000 task.ti: ffff88030da3e000 RIP: 0010:[<ffffffffa019da92>] [<ffffffffa019da92>] edac_unregister_sysfs+0x22/0x30 [edac_core] RSP: 0018:ffff88030da3fe28 EFLAGS: 00010292 RAX: 2030203020312030 RBX: ffff880311b4e000 RCX: 000000000000095c RDX: 0000000000000001 RSI: ffff880327bb9600 RDI: 0000000000000286 RBP: ffff880311b4e750 R08: 0000000000000000 R09: ffffffff81296110 R10: 0000000000000400 R11: 0000000000000000 R12: ffff88030ba1ac68 R13: 0000000000000001 R14: 00000000011b02f0 R15: 0000000000000000 FS: 00007fc9bf8f5700(0000) GS:ffff8801a7c40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000403c90 CR3: 000000019ebdf000 CR4: 00000000000007e0 Stack: Call Trace: i7core_unregister_mci.isra.9 i7core_remove pci_device_remove __device_release_driver driver_detach bus_remove_driver pci_unregister_driver i7core_exit SyS_delete_module system_call_fastpath 0x7fc9bf426536 Code: 2e 0f 1f 84 00 00 00 00 00 66 66 66 66 90 53 48 89 fb e8 52 2a 1f e1 48 8b bb a0 02 00 00 e8 46 59 1f e1 48 8b 83 a0 02 00 00 5b <48> 8b 38 e9 26 9a fe e0 66 0f 1f 44 00 00 66 66 66 66 90 48 8b RIP [<ffffffffa019da92>] edac_unregister_sysfs+0x22/0x30 [edac_core] RSP <ffff88030da3fe28> Signed-off-by:
-
Konstantin Khlebnikov authored
commit 84889d49 upstream. This patch fixes kernel crash at removing directory which contains whiteouts from lower layers. Cache of directory content passed as "list" contains entries from all layers, including whiteouts from lower layers. So, lookup in upper dir (moved into work at this stage) will return negative entry. Plus this cache is filled long before and we can race with external removal. Example: mkdir -p lower0/dir lower1/dir upper work overlay touch lower0/dir/a lower0/dir/b mknod lower1/dir/a c 0 0 mount -t overlay none overlay -o lowerdir=lower1:lower0,upperdir=upper,workdir=work rm -fr overlay/dir Signed-off-by:
Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by:
Miklos Szeredi <miklos@szeredi.hu> Signed-off-by:
-
Uri Mashiach authored
commit 9b2761cb upstream. The maximum chunks used by the function is (SPI_AGGR_BUFFER_SIZE / WSPI_MAX_CHUNK_SIZE + 1). The original commands array had space for (SPI_AGGR_BUFFER_SIZE / WSPI_MAX_CHUNK_SIZE) commands. When the last chunk is used (len > 4 * WSPI_MAX_CHUNK_SIZE), the last command is stored outside the bounds of the commands array. Oops 5 (page fault) is generated during current wl1271 firmware load attempt: root@debian-armhf:~# ifconfig wlan0 up [ 294.312399] Unable to handle kernel paging request at virtual address 00203fc4 [ 294.320173] pgd = de528000 [ 294.323028] [00203fc4] *pgd=00000000 [ 294.326916] Internal error: Oops: 5 [#1] SMP ARM [ 294.331789] Modules linked in: bnep rfcomm bluetooth ipv6 arc4 wl12xx wlcore mac80211 musb_dsps cfg80211 musb_hdrc usbcore usb_common wlcore_spi omap_rng rng_core musb_am335x omap_wdt cpufreq_dt thermal_sys hwmon [ 294.351838] CPU: 0 PID: 1827 Comm: ifconfig Not tainted 4.2.0-00002-g3e9ad27-dirty #78 [ 294.360154] Hardware name: Generic AM33XX (Flattened Device Tree) [ 294.366557] task: dc9d6d40 ti: de550000 task.ti: de550000 [ 294.372236] PC is at __spi_validate+0xa8/0x2ac [ 294.376902] LR is at __spi_sync+0x78/0x210 [ 294.381200] pc : [<c049c760>] lr : [<c049ebe0>] psr: 60000013 [ 294.381200] sp : de551998 ip : de5519d8 fp : 00200000 [ 294.393242] r10: de551c8c r9 : de5519d8 r8 : de3a9000 [ 294.398730] r7 : de3a9258 r6 : de3a9400 r5 : de551a48 r4 : 00203fbc [ 294.405577] r3 : 00000000 r2 : 00000000 r1 : 00000000 r0 : de3a9000 [ 294.412420] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user [ 294.419918] Control: 10c5387d Table: 9e528019 DAC: 00000015 [ 294.425954] Process ifconfig (pid: 1827, stack limit = 0xde550218) [ 294.432437] Stack: (0xde551998 to 0xde552000) ... [ 294.883613] [<c049c760>] (__spi_validate) from [<c049ebe0>] (__spi_sync+0x78/0x210) [ 294.891670] [<c049ebe0>] (__spi_sync) from [<bf036598>] (wl12xx_spi_raw_write+0xfc/0x148 [wlcore_spi]) [ 294.901661] [<bf036598>] (wl12xx_spi_raw_write [wlcore_spi]) from [<bf21c694>] (wlcore_boot_upload_firmware+0x1ec/0x458 [wlcore]) [ 294.914038] [<bf21c694>] (wlcore_boot_upload_firmware [wlcore]) from [<bf24532c>] (wl12xx_boot+0xc10/0xfac [wl12xx]) [ 294.925161] [<bf24532c>] (wl12xx_boot [wl12xx]) from [<bf20d5cc>] (wl1271_op_add_interface+0x5b0/0x910 [wlcore]) [ 294.936364] [<bf20d5cc>] (wl1271_op_add_interface [wlcore]) from [<bf15c4ac>] (ieee80211_do_open+0x44c/0xf7c [mac80211]) [ 294.947963] [<bf15c4ac>] (ieee80211_do_open [mac80211]) from [<c0537978>] (__dev_open+0xa8/0x110) [ 294.957307] [<c0537978>] (__dev_open) from [<c0537bf8>] (__dev_change_flags+0x88/0x148) [ 294.965713] [<c0537bf8>] (__dev_change_flags) from [<c0537cd0>] (dev_change_flags+0x18/0x48) [ 294.974576] [<c0537cd0>] (dev_change_flags) from [<c05a55a0>] (devinet_ioctl+0x6b4/0x7d0) [ 294.983191] [<c05a55a0>] (devinet_ioctl) from [<c0517040>] (sock_ioctl+0x1e4/0x2bc) [ 294.991244] [<c0517040>] (sock_ioctl) from [<c017d378>] (do_vfs_ioctl+0x420/0x6b0) [ 294.999208] [<c017d378>] (do_vfs_ioctl) from [<c017d674>] (SyS_ioctl+0x6c/0x7c) [ 295.006880] [<c017d674>] (SyS_ioctl) from [<c000f4c0>] (ret_fast_syscall+0x0/0x54) [ 295.014835] Code: e1550004 e2444034 0a00007d e5953018 (e5942008) [ 295.021544] ---[ end trace 66ed188198f4e24e ]--- Signed-off-by:
Uri Mashiach <uri.mashiach@compulab.co.il> Acked-by:
Igor Grinberg <grinberg@compulab.co.il> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Peter Wu authored
commit 17bc5586 upstream. Free skb for received frames with a wrong checksum. This can happen pretty rapidly, exhausting all memory. This fixes a memleak (detected with kmemleak). Originally found while using monitor mode, but it also appears during managed mode (once the link is up). Signed-off-by:
Peter Wu <peter@lekensteyn.nl> ACKed-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
-
Dmitry Tunin authored
commit 1623d0bf upstream. BugLink: https://bugs.launchpad.net/bugs/1522949 T: Bus=03 Lev=02 Prnt=02 Port=05 Cnt=02 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0930 ProdID=0225 Rev=01.12 S: Manufacturer=Broadcom Corp S: Product=BCM43142A0 S: SerialNumber=4CBB58034671 C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none) Signed-off-by:
Dmitry Tunin <hanipouspilot@gmail.com> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
Miklos Szeredi authored
commit ed06e069 upstream. We copy i_uid and i_gid of underlying inode into overlayfs inode. Except for the root inode. Fix this omission. Signed-off-by:
-
David Gibson authored
commit 35a4933a upstream. 1e75fa8b "time: Condense timekeeper.xtime into xtime_sec" replaced a call to clocksource_cyc2ns() from timekeeping_get_ns() with an open-coded version of the same logic to avoid keeping a semi-redundant struct timespec in struct timekeeper. However, the commit also introduced a subtle semantic change - where clocksource_cyc2ns() uses purely unsigned math, the new version introduces a signed temporary, meaning that if (delta * tk->mult) has a 63-bit overflow the following shift will still give a negative result. The choice of 'maxsec' in __clocksource_updatefreq_scale() means this will generally happen if there's a ~10 minute pause in examining the clocksource. This can be triggered on a powerpc KVM guest by stopping it from qemu for a bit over 10 minutes. After resuming time has jumped backwards several minutes causing numerous problems (jiffies does not advance, msleep()s can be extended by minutes..). It doesn't happen on x86 KVM guests, because the guest TSC is effectively frozen while the guest is stopped, which is not the case for the powerpc timebase. Obviously an unsigned (64 bit) overflow will only take twice as long as a signed, 63-bit overflow. I don't know the time code well enough to know if that will still cause incorrect calculations, or if a 64-bit overflow is avoided elsewhere. Still, an incorrect forwards clock adjustment will cause less trouble than time going backwards. So, this patch removes the potential for intermediate signed overflow. Suggested-by:
Laurent Vivier <lvivier@redhat.com> Tested-by:
David Gibson <david@gibson.dropbear.id.au> Signed-off-by:
John Stultz <john.stultz@linaro.org> Signed-off-by:
-
John Blackwood authored
commit 5db4fd8c upstream. Make sure to clear out any ptrace singlestep state when a ptrace(2) PTRACE_DETACH call is made on arm64 systems. Otherwise, the previously ptraced task will die off with a SIGTRAP signal if the debugger just previously singlestepped the ptraced task. Signed-off-by:
John Blackwood <john.blackwood@ccur.com> [will: added comment to justify why this is in the arch code] Signed-off-by:
-
Oliver Neukum authored
commit 1eaf35e4 upstream. The module should fail to load. Signed-off-by:
Oliver Neukum <oneukum@suse.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Alex Deucher authored
commit dbb17a21 upstream. Need to call this on resume if displays changes during suspend in order to properly be notified of changes. Signed-off-by:
-
Paolo Bonzini authored
commit aba2f06c upstream. Poor #AC was so unimportant until a few days ago that we were not even tracing its name correctly. But now it's all over the place. Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Paolo Bonzini authored
commit 9dbe6cf9 upstream. If we do not do this, it is not properly saved and restored across migration. Windows notices due to its self-protection mechanisms, and is very upset about it (blue screen of death). Cc: Radim Krcmar <rkrcmar@redhat.com> Signed-off-by:
-
Steven Rostedt authored
commit 32abc2ed upstream. When a long value is read on 32 bit machines for 64 bit output, the parsing needs to change "%lu" into "%llu", as the value is read natively. Unfortunately, if "%llu" is already there, the code will add another "l" to it and fail to parse it properly. Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Acked-by:
Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/20151116172516.4b79b109@gandalf.local.homeSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Malcolm Priestley authored
commit c9d57de6 upstream. When in FE_TUNE_MODE_ONESHOT the frontend must report the actual capabilities so user can take appropriate action. With frontends that can't do auto inversion this is done by dvb-core automatically so CAN_INVERSION_AUTO is valid. However, when in FE_TUNE_MODE_ONESHOT this is not true. So only set FE_CAN_INVERSION_AUTO in modes other than FE_TUNE_MODE_ONESHOT Signed-off-by:
Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by:
-
Antonio Ospite authored
commit dcc7fdbe upstream. v4l2-compliance sends a zeroed struct v4l2_streamparm in v4l2-test-formats.cpp::testParmType(), and this results in a division by 0 in some gspca subdrivers: divide error: 0000 [#1] SMP Modules linked in: gspca_ov534 gspca_main ... CPU: 0 PID: 17201 Comm: v4l2-compliance Not tainted 4.3.0-rc2-ao2 #1 Hardware name: System manufacturer System Product Name/M2N-E SLI, BIOS ASUS M2N-E SLI ACPI BIOS Revision 1301 09/16/2010 task: ffff8800818306c0 ti: ffff880095c4c000 task.ti: ffff880095c4c000 RIP: 0010:[<ffffffffa079bd62>] [<ffffffffa079bd62>] sd_set_streamparm+0x12/0x60 [gspca_ov534] RSP: 0018:ffff880095c4fce8 EFLAGS: 00010296 RAX: 0000000000000000 RBX: ffff8800c9522000 RCX: ffffffffa077a140 RDX: 0000000000000000 RSI: ffff880095e0c100 RDI: ffff8800c9522000 RBP: ffff880095e0c100 R08: ffffffffa077a100 R09: 00000000000000cc R10: ffff880067ec7740 R11: 0000000000000016 R12: ffffffffa07bb400 R13: 0000000000000000 R14: ffff880081b6a800 R15: 0000000000000000 FS: 00007fda0de78740(0000) GS:ffff88012fc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000014630f8 CR3: 00000000cf349000 CR4: 00000000000006f0 Stack: ffffffffa07a6431 ffff8800c9522000 ffffffffa077656e 00000000c0cc5616 ffff8800c9522000 ffffffffa07a5e20 ffff880095e0c100 0000000000000000 ffff880067ec7740 ffffffffa077a140 ffff880067ec7740 0000000000000016 Call Trace: [<ffffffffa07a6431>] ? v4l_s_parm+0x21/0x50 [videodev] [<ffffffffa077656e>] ? vidioc_s_parm+0x4e/0x60 [gspca_main] [<ffffffffa07a5e20>] ? __video_do_ioctl+0x280/0x2f0 [videodev] [<ffffffffa07a5ba0>] ? video_ioctl2+0x20/0x20 [videodev] [<ffffffffa07a59b9>] ? video_usercopy+0x319/0x4e0 [videodev] [<ffffffff81182dc1>] ? page_add_new_anon_rmap+0x71/0xa0 [<ffffffff811afb92>] ? mem_cgroup_commit_charge+0x52/0x90 [<ffffffff81179b18>] ? handle_mm_fault+0xc18/0x1680 [<ffffffffa07a15cc>] ? v4l2_ioctl+0xac/0xd0 [videodev] [<ffffffff811c846f>] ? do_vfs_ioctl+0x28f/0x480 [<ffffffff811c86d4>] ? SyS_ioctl+0x74/0x80 [<ffffffff8154a8b6>] ? entry_SYSCALL_64_fastpath+0x16/0x75 Code: c7 93 d9 79 a0 5b 5d e9 f1 f3 9a e0 0f 1f 00 66 2e 0f 1f 84 00 00 00 00 00 66 66 66 66 90 53 31 d2 48 89 fb 48 83 ec 08 8b 46 10 <f7> 76 0c 80 bf ac 0c 00 00 00 88 87 4e 0e 00 00 74 09 80 bf 4f RIP [<ffffffffa079bd62>] sd_set_streamparm+0x12/0x60 [gspca_ov534] RSP <ffff880095c4fce8> ---[ end trace 279710c2c6c72080 ]--- Following what the doc says about a zeroed timeperframe (see http://www.linuxtv.org/downloads/v4l-dvb-apis/vidioc-g-parm.html): ... To reset manually applications can just set this field to zero. fix the issue by resetting the frame rate to a default value in case of an unusable timeperframe. The fix is done in the subdrivers instead of gspca.c because only the subdrivers have notion of a default frame rate to reset the camera to. Signed-off-by:
Antonio Ospite <ao2@ao2.it> Reviewed-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
-
Hans Verkuil authored
commit 4623e596 upstream. In the 3.17 kernel the poll() behavior changed for output streams: as long as not all buffers were queued up poll() would return that userspace can write. This is fine for the write() call, but when using stream I/O this changed the behavior since the expectation was that it would wait for buffers to become available for dequeuing. This patch only enables the check whether you can queue buffers for file I/O only, and skips it for stream I/O. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Vito Caputo authored
commit e4ad29fa upstream. Rather than always allocating the high-order XATTR_SIZE_MAX buffer which is costly and prone to failure, only allocate what is needed and realloc if necessary. Fixes https://github.com/coreos/bugs/issues/489Signed-off-by:
-
Miklos Szeredi authored
commit 97daf8b9 upstream. When ovl_copy_xattr() encountered a zero size xattr no more xattrs were copied and the function returned success. This is clearly not the desired behavior. Signed-off-by:
-
David Hildenbrand authored
commit 87af9e7f upstream. Commit b2c4623d ("rcu: More on deadlock between CPU hotplug and expedited grace periods") introduced another problem that can easily be reproduced by starting/stopping cpus in a loop. E.g.: for i in `seq 5000`; do echo 1 > /sys/devices/system/cpu/cpu1/online echo 0 > /sys/devices/system/cpu/cpu1/online done Will result in: INFO: task /cpu_start_stop:1 blocked for more than 120 seconds. Call Trace: ([<00000000006a028e>] __schedule+0x406/0x91c) [<0000000000130f60>] cpu_hotplug_begin+0xd0/0xd4 [<0000000000130ff6>] _cpu_up+0x3e/0x1c4 [<0000000000131232>] cpu_up+0xb6/0xd4 [<00000000004a5720>] device_online+0x80/0xc0 [<00000000004a57f0>] online_store+0x90/0xb0 ... And a deadlock. Problem is that if the last ref in put_online_cpus() can't get the cpu_hotplug.lock the puts_pending count is incremented, but a sleeping active_writer might never be woken up, therefore never exiting the loop in cpu_hotplug_begin(). This fix removes puts_pending and turns refcount into an atomic variable. We also introduce a wait queue for the active_writer, to avoid possible races and use-after-free. There is no need to take the lock in put_online_cpus() anymore. Can't reproduce it with this fix. Signed-off-by:
David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by:
-
- 26 Jan, 2016 1 commit
-
-
Hans de Goede authored
commit 0a363e85 upstream. MSI interrupts appear to not work for nv46 based cards. Change the mc subdev oclass for these cards from nv44 to nv4c, the nv4c mc code is identical to the nv44 mc code except that it does not use msi (it does not define a msi_rearm callback). BugLink: https://bugs.freedesktop.org/show_bug.cgi?id=90435Signed-off-by:
Ben Skeggs <bskeggs@redhat.com> [ kamal: backport to 3.19-stable: file rename ] Signed-off-by:
-
- 22 Jan, 2016 2 commits
-
-
Nikolay Aleksandrov authored
commit 0e615e96 upstream. When destroying an mrt table the static mfc entries and the static devices are kept, which leads to devices that can never be destroyed (because of refcnt taken) and leaked memory, for example: unreferenced object 0xffff880034c144c0 (size 192): comm "mfc-broken", pid 4777, jiffies 4320349055 (age 46001.964s) hex dump (first 32 bytes): 98 53 f0 34 00 88 ff ff 98 53 f0 34 00 88 ff ff .S.4.....S.4.... ef 0a 0a 14 01 02 03 04 00 00 00 00 01 00 00 00 ................ backtrace: [<ffffffff815c1b9e>] kmemleak_alloc+0x4e/0xb0 [<ffffffff811ea6e0>] kmem_cache_alloc+0x190/0x300 [<ffffffff815931cb>] ip_mroute_setsockopt+0x5cb/0x910 [<ffffffff8153d575>] do_ip_setsockopt.isra.11+0x105/0xff0 [<ffffffff8153e490>] ip_setsockopt+0x30/0xa0 [<ffffffff81564e13>] raw_setsockopt+0x33/0x90 [<ffffffff814d1e14>] sock_common_setsockopt+0x14/0x20 [<ffffffff814d0b51>] SyS_setsockopt+0x71/0xc0 [<ffffffff815cdbf6>] entry_SYSCALL_64_fastpath+0x16/0x7a [<ffffffffffffffff>] 0xffffffffffffffff Make sure that everything is cleaned on netns destruction. Signed-off-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Reviewed-by:
Cong Wang <cwang@twopensource.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Kamal Mostafa authored
Signed-off-by:
-
- 20 Jan, 2016 1 commit
-
-
Andrea Arcangeli authored
commit ff4319dc upstream. The dmi_ver wasn't updated correctly before the dmi_decode method run to save the uuid. That resulted in "dmidecode -s system-uuid" and /sys/class/dmi/id/product_uuid disagreeing. The latter was buggy and this fixes it. Reported-by:
Federico Simoncelli <fsimonce@redhat.com> Fixes: 9f9c9cbb ("drivers/firmware/dmi_scan.c: fetch dmi version from SMBIOS if it exists") Fixes: 79bae42d ("dmi_scan: refactor dmi_scan_machine(), {smbios,dmi}_present()") Signed-off-by:
Andrea Arcangeli <aarcange@redhat.com> Signed-off-by:
Jean Delvare <jdelvare@suse.de> Signed-off-by:
-
