- 17 Jul, 2020 17 commits
-
-
Christophe JAILLET authored
The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below and has been hand modified to replace GFP_ with a correct flag. It has been compile tested. When memory is allocated in 'ace_allocate_descriptors()' and 'ace_init()' GFP_KERNEL can be used because both functions are called from the probe function and no lock is acquired. @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Christophe JAILLET authored
The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below and has been hand modified to replace GFP_ with a correct flag. It has been compile tested. When memory is allocated in 'gem_init_one()', GFP_KERNEL can be used because it is a probe function and no lock is acquired. @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Signed-off-by:
-
Suraj Upadhyay authored
Replace goto loop with while loop. Signed-off-by:
Suraj Upadhyay <usuraj35@gmail.com> Signed-off-by:
-
David S. Miller authored
Priyaranjan Jha says: ==================== tcp: improve handling of DSACK covering multiple segments Currently, while processing DSACK, we assume DSACK covers only one segment. This leads to significant underestimation of no. of duplicate segments with LRO/GRO. Also, the existing SNMP counters, TCPDSACKRecv and TCPDSACKOfoRecv, make similar assumption for DSACK, which makes them unusable for estimating spurious retransmit rates. This patch series fixes the segment accounting with DSACK, by estimating number of duplicate segments based on: (DSACKed sequence range) / MSS. It also introduces a new SNMP counter, TCPDSACKRecvSegs, which tracks the estimated number of duplicate segments. ==================== Signed-off-by: -
Priyaranjan Jha authored
There are two existing SNMP counters, TCPDSACKRecv and TCPDSACKOfoRecv, which are incremented depending on whether the DSACKed range is below the cumulative ACK sequence number or not. Unfortunately, these both implicitly assume each DSACK covers only one segment. This makes these counters unusable for estimating spurious retransmit rates, or real/non-spurious loss rate. This patch introduces a new SNMP counter, TCPDSACKRecvSegs, which tracks the estimated number of duplicate segments based on: (DSACKed sequence range) / MSS. This counter is usable for estimating spurious retransmit rates, or real/non-spurious loss rate. Signed-off-by:
Priyaranjan Jha <priyarjha@google.com> Signed-off-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
Yuchung Cheng <ycheng@google.com> Signed-off-by:
Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by:
-
Priyaranjan Jha authored
Currently, while processing DSACK, we assume DSACK covers only one segment. This leads to significant underestimation of DSACKs with LRO/GRO. This patch fixes segment accounting with DSACK by estimating segment count from DSACK sequence range / MSS. Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
Yousuk Seung <ysseung@google.com> Signed-off-by:
-
Christophe JAILLET authored
The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below and has been hand modified to replace GFP_ with a correct flag. It has been compile tested. When memory is allocated in 'cas_tx_tiny_alloc()', GFP_KERNEL can be used because a few lines below in its only caller, 'cas_alloc_rxds()', is also called. This function makes an explicit use of GFP_KERNEL. When memory is allocated in 'cas_init_one()', GFP_KERNEL can be used because it is a probe function and no lock is acquired. @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Signed-off-by:
-
Davide Caratti authored
since commit d47a7215 ("mptcp: fix race in subflow_data_ready()"), it is possible to observe a regression in MP_JOIN kselftests. For sockets in TCP_CLOSE state, it's not sufficient to just wake up the main socket: we also need to ensure that received data are made available to the reader. Silence the WARN_ON_ONCE() in these cases: it preserves the syzkaller fix and restores kselftests when they are ran as follows: # while true; do > make KBUILD_OUTPUT=/tmp/kselftest TARGETS=net/mptcp kselftest > done Reported-by:
Florian Westphal <fw@strlen.de> Fixes: d47a7215 ("mptcp: fix race in subflow_data_ready()") Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/47Signed-off-by:
Davide Caratti <dcaratti@redhat.com> Reviewed-by:
Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by:
-
David S. Miller authored
Bjørn Mork says: ==================== usbnet: multicast filter support for cdc ncm devices This revives a 2 year old patch set from Miguel Rodríguez Pérez, which appears to have been lost somewhere along the way. I've based it on the last version I found (v4), and added one patch which I believe must have been missing in the original. I kept Oliver's ack on one of the patches, since both the patch and the motivation still is the same. Hope this is OK.. Thanks to the anonymous user <wxcafe@wxcafe.net> for bringing up this problem in https://bugs.debian.org/965074 This is only build and load tested by me. I don't have any device where I can test the actual functionality. ==================== Signed-off-by:
-
Miguel Rodríguez Pérez authored
We set set_rx_mode to usbnet_cdc_update_filter provided by cdc_ether that simply admits all multicast traffic if there is more than one multicast filter configured. Signed-off-by:
Miguel Rodríguez Pérez <miguel@det.uvigo.gal> Signed-off-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
-
Miguel Rodríguez Pérez authored
The cdc_ncm driver overrides the net_device_ops structure used by usbnet to be able to hook into .ndo_change_mtu. However, the structure was missing the .ndo_set_rx_mode field, preventing the driver from hooking into usbnet's set_rx_mode. This patch adds the missing callback to usbnet_set_rx_mode in net_device_ops. Signed-off-by:
-
Bjørn Mork authored
This function can be reused by other usbnet minidrivers. Signed-off-by:
-
Miguel Rodríguez Pérez authored
This makes the function available to other drivers, like cdc_ncm. Signed-off-by:
Oliver Neukum <oneukum@suse.com> Signed-off-by:
-
Miguel Rodríguez Pérez authored
usbnet_cdc_update_filter was getting the interface number from the usb_interface struct in cdc_state->control. However, cdc_ncm does not initialize that structure in its bind function, but uses cdc_ncm_ctx instead. Getting intf directly from struct usbnet solves the problem. Signed-off-by:
-
Eelco Chaudron authored
This patch reorders the masks array every 4 seconds based on their usage count. This greatly reduces the masks per packet hit, and hence the overall performance. Especially in the OVS/OVN case for OpenShift. Here are some results from the OVS/OVN OpenShift test, which use 8 pods, each pod having 512 uperf connections, each connection sends a 64-byte request and gets a 1024-byte response (TCP). All uperf clients are on 1 worker node while all uperf servers are on the other worker node. Kernel without this patch : 7.71 Gbps Kernel with this patch applied: 14.52 Gbps We also run some tests to verify the rebalance activity does not lower the flow insertion rate, which does not. Signed-off-by:
Eelco Chaudron <echaudro@redhat.com> Tested-by:
Andrew Theurer <atheurer@redhat.com> Reviewed-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
-
Chris Healy authored
Some Cotsworks SFF have invalid data in the first few bytes of the module EEPROM. This results in these modules not being detected as valid modules. Address this by poking the correct EEPROM values into the module EEPROM when the model/PN match and the existing module EEPROM contents are not correct. Signed-off-by:
Chris Healy <cphealy@gmail.com> Signed-off-by:
-
Vladimir Oltean authored
At the time of introduction, in commit bdeced75 ("net: dsa: felix: Add PCS operations for PHYLINK"), support for the Lynx PCS inside Felix was relying, for USXGMII support, on the fact that get_phy_device() is able to parse the Lynx PCS "device-in-package" registers for this C45 MDIO device and identify it correctly. However, this was actually working somewhat by mistake (in the sense that, even though it was detected, it was detected for the wrong reasons). The get_phy_c45_ids() function works by iterating through all MMDs starting from 1 (MDIO_MMD_PMAPMD) and stops at the first one which returns a non-zero value in the "device-in-package" register pair, proceeding to see what that non-zero value is. For the Felix PCS, the first MMD (1, for the PMA/PMD) returns a non-zero value of 0xffffffff in the "device-in-package" registers. There is a code branch which is supposed to treat this case and flag it as wrong, and normally, this would have caught my attention when adding initial support for this PCS: if ((devs_in_pkg & 0x1fffffff) == 0x1fffffff) { /* If mostly Fs, there is no device there, then let's probe * MMD 0, as some 10G PHYs have zero Devices In package, * e.g. Cortina CS4315/CS4340 PHY. */ However, this code never actually kicked in, it seems, because this snippet from get_phy_c45_devs_in_pkg() was basically sabotaging itself, by returning 0xfffffffe instead of 0xffffffff: /* Bit 0 doesn't represent a device, it indicates c22 regs presence */ *devices_in_package &= ~BIT(0); Then the rest of the code just carried on thinking "ok, MMD 1 (PMA/PMD) says that there are 31 devices in that package, each having a device id of ffff:ffff, that's perfectly fine, let's go ahead and probe this PHY device". But after cleanup commit 320ed3bf ("net: phy: split devices_in_package"), this got "fixed", and now devs_in_pkg is no longer 0xfffffffe, but 0xffffffff. So now, get_phy_device is returning -ENODEV for the Lynx PCS, because the semantics have remained mostly unchanged: the loop stops at the first MMD that returns a non-zero value, and that is MMD 1. But the Lynx PCS is simply a clause 37 PCS which implements the required MAC-side functionality for USXGMII (when operated in C45 mode, which is where C45 devices-in-package detection is relevant to). Of course it will fail the PMD/PMA test (MMD 1), since it is not a PHY. But it does implement detection for MDIO_MMD_PCS (3): - MDIO_DEVS1=0x008a, MDIO_DEVS2=0x0000, - MDIO_DEVID1=0x0083, MDIO_DEVID2=0xe400 Let get_phy_c45_ids() continue searching for valid MMDs, and don't assume that every phy_device has a PMA/PMD MMD implemented. Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
- 16 Jul, 2020 23 commits
-
-
Jakub Kicinski authored
Petr Machata says: ==================== net: sched: Do not drop root lock in tcf_qevent_handle() Mirred currently does not mix well with blocks executed after the qdisc root lock is taken. This includes classification blocks (such as in PRIO, ETS, DRR qdiscs) and qevents. The locking caused by the packet mirrored by mirred can cause deadlocks: either when the thread of execution attempts to take the lock a second time, or when two threads end up waiting on each other's locks. The qevent patchset attempted to not introduce further badness of this sort, and dropped the lock before executing the qevent block. However this lead to too little locking and races between qdisc configuration and packet enqueue in the RED qdisc. Before the deadlock issues are solved in a way that can be applied across many qdiscs reasonably easily, do for qevents what is done for the classification blocks and just keep holding the root lock. That is done in patch #1. Patch #2 then drops the now unnecessary root_lock argument from Qdisc_ops.enqueue. ==================== Signed-off-by:Jakub Kicinski <kuba@kernel.org>
-
Petr Machata authored
This reverts commit aebe4426. Signed-off-by:
Petr Machata <petrm@mellanox.com> Signed-off-by:
-
Petr Machata authored
Mirred currently does not mix well with blocks executed after the qdisc root lock is taken. This includes classification blocks (such as in PRIO, ETS, DRR qdiscs) and qevents. The locking caused by the packet mirrored by mirred can cause deadlocks: either when the thread of execution attempts to take the lock a second time, or when two threads end up waiting on each other's locks. The qevent patchset attempted to not introduce further badness of this sort, and dropped the lock before executing the qevent block. However this lead to too little locking and races between qdisc configuration and packet enqueue in the RED qdisc. Before the deadlock issues are solved in a way that can be applied across many qdiscs reasonably easily, do for qevents what is done for the classification blocks and just keep holding the root lock. Signed-off-by:
-
Vladimir Oltean authored
Having the users of MSCC_OCELOT_SWITCH_LIB depend on REGMAP_MMIO was a bad idea, since that symbol is not user-selectable. So we should have kept a 'select REGMAP_MMIO'. When we do that, we run into 2 more problems: - By depending on GENERIC_PHY, we are causing a recursive dependency. But it looks like GENERIC_PHY has no other dependencies, and other drivers select it, so we can select it too: drivers/of/Kconfig:69:error: recursive dependency detected! drivers/of/Kconfig:69: symbol OF_IRQ depends on IRQ_DOMAIN kernel/irq/Kconfig:68: symbol IRQ_DOMAIN is selected by REGMAP drivers/base/regmap/Kconfig:7: symbol REGMAP default is visible depending on REGMAP_MMIO drivers/base/regmap/Kconfig:39: symbol REGMAP_MMIO is selected by MSCC_OCELOT_SWITCH_LIB drivers/net/ethernet/mscc/Kconfig:15: symbol MSCC_OCELOT_SWITCH_LIB is selected by MSCC_OCELOT_SWITCH drivers/net/ethernet/mscc/Kconfig:22: symbol MSCC_OCELOT_SWITCH depends on GENERIC_PHY drivers/phy/Kconfig:8: symbol GENERIC_PHY is selected by PHY_BCM_NS_USB3 drivers/phy/broadcom/Kconfig:41: symbol PHY_BCM_NS_USB3 depends on MDIO_BUS drivers/net/phy/Kconfig:13: symbol MDIO_BUS depends on MDIO_DEVICE drivers/net/phy/Kconfig:6: symbol MDIO_DEVICE is selected by PHYLIB drivers/net/phy/Kconfig:254: symbol PHYLIB is selected by ARC_EMAC_CORE drivers/net/ethernet/arc/Kconfig:19: symbol ARC_EMAC_CORE is selected by ARC_EMAC drivers/net/ethernet/arc/Kconfig:25: symbol ARC_EMAC depends on OF_IRQ - By depending on PHYLIB, we are causing a recursive dependency. PHYLIB only has a single dependency, "depends on NETDEVICES", which we are already depending on, so we can again hack our way into conformance by turning the PHYLIB dependency into a select. drivers/of/Kconfig:69:error: recursive dependency detected! drivers/of/Kconfig:69: symbol OF_IRQ depends on IRQ_DOMAIN kernel/irq/Kconfig:68: symbol IRQ_DOMAIN is selected by REGMAP drivers/base/regmap/Kconfig:7: symbol REGMAP default is visible depending on REGMAP_MMIO drivers/base/regmap/Kconfig:39: symbol REGMAP_MMIO is selected by MSCC_OCELOT_SWITCH_LIB drivers/net/ethernet/mscc/Kconfig:15: symbol MSCC_OCELOT_SWITCH_LIB is selected by MSCC_OCELOT_SWITCH drivers/net/ethernet/mscc/Kconfig:22: symbol MSCC_OCELOT_SWITCH depends on PHYLIB drivers/net/phy/Kconfig:254: symbol PHYLIB is selected by ARC_EMAC_CORE drivers/net/ethernet/arc/Kconfig:19: symbol ARC_EMAC_CORE is selected by ARC_EMAC drivers/net/ethernet/arc/Kconfig:25: symbol ARC_EMAC depends on OF_IRQ Fixes: f4d0323b ("net: mscc: ocelot: convert MSCC_OCELOT_SWITCH into a library") Signed-off-by:
-
John Ogness authored
A busy-wait loop is used to implement waiting for bits to be copied from the skb to the kernel buffer before retiring a block. This is a problem on PREEMPT_RT because the copying task could be preempted by the busy-waiting task and thus live lock in the busy-wait loop. Replace the busy-wait logic with an rwlock_t. This provides lockdep coverage and makes the code RT ready. Signed-off-by:
John Ogness <john.ogness@linutronix.de> Signed-off-by:
-
Jakub Kicinski authored
Sergey Organov says: ==================== net: fec: a few improvements This is a collection of simple improvements that reduce and/or simplify code. They got developed out of attempt to use DP83640 PTP PHY connected to built-in FEC (that has its own PTP support) of the iMX 6SX micro-controller. The primary bug-fix was now submitted separately, and this is the rest of the changes. NOTE: the patches are developed and tested on 4.9.146, and rebased on top of recent 'net-next/master', where, besides visual inspection, I only tested that they do compile. ==================== Signed-off-by: -
Sergey Organov authored
No need to use snprintf() on a constant string, nor using magic constant in the fixed code was a good idea. Signed-off-by:
Sergey Organov <sorganov@gmail.com> Acked-by:
Fugang Duan <fugang.duan@nxp.com> Signed-off-by:
-
Sergey Organov authored
Code of the form "if(x) x = 0" replaced with "x = 0". Code of the form "if(x == a) x = a" removed. Signed-off-by:
-
Sergey Organov authored
Initializing with 0 makes it much easier to identify time stamps from otherwise uninitialized clock. Initialization of PTP clock with current kernel time makes little sense as PTP time scale differs from UTC time scale that kernel time represents. It only leads to confusion when no actual PTP initialization happens, as these time scales differ in a small integer number of seconds (37 at the time of writing.) Signed-off-by:
-
Sergey Organov authored
PPS feature could be useful even when hardware time stamping of network packets is not in use, so remove offending check for this condition from fec_ptp_enable_pps(). Signed-off-by:
-
Randy Dunlap authored
Drop the doubled word "by" in a comment. Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: netdev@vger.kernel.org Signed-off-by:
-
Randy Dunlap authored
Drop doubled words in several comments. Signed-off-by:
-
Randy Dunlap authored
Drop doubled word "the" in a comment. Signed-off-by:
-
Randy Dunlap authored
Drop doubled word "to" in a comment. Signed-off-by:
-
Randy Dunlap authored
Drop doubled words "or" and "the" in several comments. Signed-off-by:
-
Randy Dunlap authored
Drop doubled word "not" in a comment. Signed-off-by:
-
Randy Dunlap authored
Drop doubled words in two comments. Fix a spello/typo. Signed-off-by:
-
Randy Dunlap authored
Drop doubled words in several comments. Signed-off-by:
-
Randy Dunlap authored
Drop doubled word "the" in two comments. Signed-off-by:
-
Kieran Bingham authored
The word 'descriptor' is misspelled throughout the tree. Fix it up accordingly: decriptor -> descriptor Signed-off-by:Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by:
-
Jakub Kicinski authored
Ido Schimmel says: ==================== mlxsw: Offload tc police action This patch set adds support for tc police action in mlxsw. Patches #1-#2 add defines for policer bandwidth limits and resource identifiers (e.g., maximum number of policers). Patch #3 adds a common policer core in mlxsw. Currently it is only used by the policy engine, but future patch sets will use it for trap policers and storm control policers. The common core allows us to share common logic between all policer types and abstract certain details from the various users in mlxsw. Patch #4 exposes the maximum number of supported policers and their current usage to user space via devlink-resource. This provides better visibility and also used for selftests purposes. Patches #5-#7 gradually add support for tc police action in the policy engine by calling into previously mentioned policer core. Patch #8 adds a generic selftest for tc-police that can be used with veth pairs or physical loopbacks. Patches #9-#11 add mlxsw-specific selftests. ==================== Signed-off-by: -
Ido Schimmel authored
Test that policers shared by different tc filters are correctly reference counted by observing policers' occupancy via devlink-resource. Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Reviewed-by:
-
Ido Schimmel authored
Query the maximum number of supported policers using devlink-resource and test that this number can be reached by configuring tc filters with police action. Test that an error is returned in case the maximum number is exceeded. Signed-off-by:
-
