- 20 May, 2011 40 commits
-
-
Laurent Pinchart authored
Instead of passing the value down to the device and getting an error back (or worse, crashing the firmware), return -ERANGE when the requested menu entry is not supported. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Laurent Pinchart authored
Supported menu entries are reported by the device in response to the GET_RES query. Use the information to return -EINVAL to userspace for unsupported values when enumerating menu entries. Signed-off-by:
-
Laurent Pinchart authored
Set the FIX_BANDWIDTH quirk for the device. Signed-off-by:
-
Laurent Pinchart authored
The camera requires the PROBE_MINMAX quirk. Add a corresponding entry in the device IDs list Signed-off-by:
-
Laurent Pinchart authored
The TomTom navigation system used in the Sony XNV 660BT and 770BT reports an RGB565 (RGBP) format, support it in the driver. Signed-off-by:
-
Martin Rubli authored
This adds detailed documentation about the driver's extension unit control features. Part of it has been adopted from the dynctrl.txt that used to be available in the driver's previous Subversion repository. The documentation has been rewritten to match the current implementation, in particular to capture the new XU control support including UVCIOC_CTRL_QUERY. Signed-off-by:
Martin Rubli <martin_rubli@logitech.com> Signed-off-by:
-
Laurent Pinchart authored
This makes the public driver API more uniform, in preparation of moving uvcvideo.h to include/linux. Keep the old names for backward compatibility with existing applications. Signed-off-by:
-
Laurent Pinchart authored
Those ioctls are deprecated, list them in the features removal schedule for 2.6.42. Signed-off-by:
-
Martin Rubli authored
This ioctl extends UVCIOC_CTRL_GET/SET by not only allowing to get/set XU controls but to also send arbitrary UVC commands to XU controls, namely GET_CUR, SET_CUR, GET_MIN, GET_MAX, GET_RES, GET_LEN, GET_INFO and GET_DEF. This is required for applications to work with XU controls, so that they can properly query the size and allocate the necessary buffers. Signed-off-by:
-
Simon Farnsworth authored
To simplify maintainer support of this driver, bump the version to 1.5.0 - this will be the first version that is expected to support mmap() for raw video frames. Signed-off-by:
Simon Farnsworth <simon.farnsworth@onelan.co.uk> Acked-by:
Andy Walls <awalls@md.metrocast.net> Signed-off-by:
-
Simon Farnsworth authored
The initial version of this patch (commit d5976931639176bb6777755d96b9f8d959f79e9e) had some issues: * It didn't correctly calculate the size of the YUV buffer for 4:2:2, resulting in capture sometimes being offset by 1/3rd of a picture. * There were a lot of variables duplicating information the driver already knew, which have been removed. * There was an in-kernel format conversion - libv4l can do this one, and is the right place to do format conversions anyway. * Some magic numbers weren't properly explained. Fix all these issues, leaving just the move from videobuf to videobuf2 to do. Signed-off-by:
-
Mariusz Kozlowski authored
Currently 'fh' initialises to whatever happens to be on stack. This looks like a typo and this patch fixes that. Signed-off-by:
Mariusz Kozlowski <mk@lab.zgora.pl> Acked-by:
Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
-
Antti Palosaari authored
Remove old DVB-T2 freq module param and detect DVB-T/T2 automatically. Implementation is trial and error, if DVB-T does not lock try DVB-T2 and vice versa. That's done by replacing normal DVBFE_ALGO_SW with DVBFE_ALGO_CUSTOM which gives better control for tuning process. DVB-C still uses normal software ZigZag, DVBFE_ALGO_SW. Signed-off-by:
Antti Palosaari <crope@iki.fi> Signed-off-by:
-
Antti Palosaari authored
Make checkpatch.pl happy by fixing whitespaces introduced by commit 79e8b8e3b8cbf67130247a3f6d25732373fe2f34 Signed-off-by:
-
Steve Kerrison authored
Signed-off-by:
Steve Kerrison <steve@stevekerrison.com> Signed-off-by:
-
Steve Kerrison authored
Signed-off-by:
-
Antti Palosaari authored
Supports DVB-T/T2/C, USB ID: 2013:024f. Empia EM28174, Sony CXD2820R and NXP TDA18271HD/C2. Signed-off-by:
-
Antti Palosaari authored
It is very first DVB-T2 Linux driver! Signed-off-by:
-
Antti Palosaari authored
EM28174 is very similar as already supported EM2874. I am not sure what are differences, but it could be analog support. Signed-off-by:
-
Antti Palosaari authored
Register multiple FEs for same adapter. After that it is possible to register two FEs for same adapter. For example one for DVB-T and one for DVB-C. Signed-off-by:
-
Antti Palosaari authored
Signed-off-by:
-
Antti Palosaari authored
Change firmware download split, which I introduced few patch earlier, a little bit to make it more readable as requested [1]. Anyhow, for some reason this seems to increase compiled binary size 52 bytes, on my AMD64 box, which is rather much for so small change. [1] http://www.spinics.net/lists/linux-media/msg31968.htmlSigned-off-by:
-
Antti Palosaari authored
It is DVB-S/S2 USB box. * DNBU10512IST NIM * STV0903 demod * STV6110 tuner * Intersil ISL6423 LNB controller Signed-off-by:
-
Antti Palosaari authored
It is USB DVB-S/S2 box. Conexant cx24116/cx24118 demod tuner combo Intersil ISL6423 LNB controller Signed-off-by:
-
Antti Palosaari authored
It is very rare I2C adapter hardware which can provide 32kB I2C write as one write. Add .i2c_wr_max option to set desired max packet size. Split transaction to smaller pieces according to that option. Signed-off-by:
-
Anatolij Gustschin authored
Currently video capturing using streaming I/O method doesn't work if capturing to overlay buffer took place before. When enabling the stream we have to check the overlay enable driver flag and reset it so that the interrupt handler won't execute the overlay interrupt path after enabling DMA in streamon routine. Otherwise the capture interrupt won't be handled correctly causing non working VIDIOC_DQBUF ioctl. Signed-off-by:
Anatolij Gustschin <agust@denx.de> Signed-off-by:
-
Anatolij Gustschin authored
Currently the driver enables overlay when running VIDIOC_S_FMT ioctl with fmt type V4L2_BUF_TYPE_VIDEO_OVERLAY. Actually, this is wrong. Add proper VIDIOC_OVERLAY support instead of using VIDIOC_S_FMT for overlay enable. Signed-off-by:
-
Jesper Juhl authored
usb_altnum_to_altsetting() may return NULL. If it does we'll dereference a NULL pointer in drivers/media/video/gspca/stv06xx/stv06xx_pb0100.c::pb0100_start(). As far as I can tell there's not really anything more sensible than -ENODEV that we can return in that situation, but I'm not at all intimate with this code so I'd like a bit of review/comments on this before it's applied. Anyway, here's a proposed patch. Signed-off-by:
Jesper Juhl <jj@chaosbits.net> Cc: Jean-Francois Moine <moinejf@free.fr> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Erik Andren <erik.andren@gmail.com> Signed-off-by:
-
David Härdeman authored
Using ir_raw_event_store_with_filter() saves about 20 lines of code. Signed-off-by:
David Härdeman <david@hardeman.nu> Signed-off-by:
-
David Härdeman authored
If an IR command is sent (using the LIRC userspace) to rc-loopback which doesn't include a trailing space, the result is that the message won't be completely decoded. In addition, "leftovers" from a previous transmission can be left until the next one. Fix this by faking a long silence after the end of TX data. Signed-off-by:
-
David Härdeman authored
This patch adds preliminary IR TX capabilities to the winbond-cir driver. Signed-off-by:
-
David Härdeman authored
Using bool instead of an int helps readability a bit. Signed-off-by:
-
Detlev Casanova authored
The MT9V032 is a parallel wide VGA sensor from Aptina (formerly Micron) controlled through I2C. The driver creates a V4L2 subdevice. It currently supports binning and cropping, and the gain, auto gain, exposure, auto exposure and test pattern controls. Signed-off-by:
Detlev Casanova <detlev.casanova@gmail.com> Signed-off-by:
-
Malcolm Priestley authored
Bits 4 and 5 on register 02 should always be set to 1. Opera1/Bsru6/z0194a/mantis_vp1033 Signed-off-by:
Malcolm Priestley <tvboxspy@gmail.com> Acked-by:
Oliver Endriss <o.endriss@gmx.de> Signed-off-by:
-
Malcolm Priestley authored
Issues with Register 02 causing spurious channel locking from standby. Should have always bits 4 & 5 written to 1. Lower nibble not used in any current driver. Usage if necessary can be applied through initab to mcr_reg. stv0299 not out of standby before writing inittab. Signed-off-by:
-
Anatolij Gustschin authored
Use the core-assisted locking in fsl-viu driver and switch to .unlocked_ioctl. Signed-off-by:
-
Jonathan Nieder authored
users is always read or written with core->lock held. A plain int is simpler and faster. Tested-by:
Andi Huber <hobrom@gmx.at> Tested-by:
Marlon de Boer <marlon@hyves.nl> Signed-off-by:
Jonathan Nieder <jrnieder@gmail.com> Signed-off-by:
-
Jonathan Nieder authored
mpeg_users is always read or written with core->lock held except in mpeg_release (where it looks like a bug). A plain int is simpler and faster. Tested-by:
-
Jonathan Nieder authored
It should not be possible to enter mpeg_open and acquire core->lock without the blackbird driver being registered, so just error out if it is not. This makes the code more readable and should prevent the bug fixed by the patch "hold device lock during sub-driver initialization" from resurfacing again. Similarly, if we enter mpeg_release and acquire core->lock then either the blackbird driver is registered (since open files keep it loaded) or the sysadmin forced the driver's removal. In the latter case the state will be inconsistent and this is worth a loud warning. Tested-by:
-
Jonathan Nieder authored
Add and use a mutex to protect the cx88-mpeg device list. Previously the BKL prevented races. Based on work by Ben Hutchings <ben@decadent.org.uk>. Tested-by:
-
