Pull vfs fixes from Al Viro.

The most notable fix here is probably the fix for a splice regression
("fix a fencepost error in pipe_advance()") noticed by Alan Wylie.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  fix a fencepost error in pipe_advance()
  coredump: Ensure proper size of sparse core files
  aio: fix lock dep warning
  tmpfs: clear S_ISGID when setting posix ACLs

Pull block fixes from Jens Axboe:

 - the virtio_blk stack DMA corruption fix from Christoph, fixing and
   issue with VMAP stacks.

 - O_DIRECT blkbits calculation fix from Chandan.

 - discard regression fix from Christoph.

 - queue init error handling fixes for nbd and virtio_blk, from Omar and
   Jeff.

 - two small nvme fixes, from Christoph and Guilherme.

 - rename of blk_queue_zone_size and bdev_zone_size to _sectors instead,
   to more closely follow what we do in other places in the block layer.
   This interface is new for this series, so let's get the naming right
   before releasing a kernel with this feature. From Damien.

* 'for-linus' of git://git.kernel.dk/linux-block:
  block: don't try to discard from __blkdev_issue_zeroout
  sd: remove __data_len hack for WRITE SAME
  nvme: use blk_rq_payload_bytes
  scsi: use blk_rq_payload_bytes
  block: add blk_rq_payload_bytes
  block: Rename blk_queue_zone_size and bdev_zone_size
  nvme: apply DELAY_BEFORE_CHK_RDY quirk at probe time too
  nvme-rdma: fix nvme_rdma_queue_is_ready
  virtio_blk: fix panic in initialization error path
  nbd: blk_mq_init_queue returns an error code on failure, not NULL
  virtio_blk: avoid DMA to stack for the sense buffer
  do_direct_IO: Use inode->i_blkbits to compute block count to be cleaned

The logics in pipe_advance() used to release all buffers past the new
position failed in cases when the number of buffers to release was equal
to pipe->buffers.  If that happened, none of them had been released,
leaving pipe full.  Worse, it was trivial to trigger and we end up with
pipe full of uninitialized pages.  IOW, it's an infoleak.

Cc: stable@vger.kernel.org # v4.9
Reported-by: "Alan J. Wylie" <alan@wylie.me.uk>
Tested-by: "Alan J. Wylie" <alan@wylie.me.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

If the last section of a core file ends with an unmapped or zero page,
the size of the file does not correspond with the last dump_skip() call.
gdb complains that the file is truncated and can be confusing to users.

After all of the vma sections are written, make sure that the file size
is no smaller than the current file position.

This problem can be demonstrated with gdb's bigcore testcase on the
sparc architecture.
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

lockdep reports a warnning. file_start_write/file_end_write only
acquire/release the lock for regular files. So checking the files in aio
side too.

[  453.532141] ------------[ cut here ]------------
[  453.533011] WARNING: CPU: 1 PID: 1298 at ../kernel/locking/lockdep.c:3514 lock_release+0x434/0x670
[  453.533011] DEBUG_LOCKS_WARN_ON(depth <= 0)
[  453.533011] Modules linked in:
[  453.533011] CPU: 1 PID: 1298 Comm: fio Not tainted 4.9.0+ #964
[  453.533011] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.9.0-1.fc24 04/01/2014
[  453.533011]  ffff8803a24b7a70 ffffffff8196cffb ffff8803a24b7ae8 0000000000000000
[  453.533011]  ffff8803a24b7ab8 ffffffff81091ee1 ffff8803a5dba700 00000dba00000008
[  453.533011]  ffffed0074496f59 ffff8803a5dbaf54 ffff8803ae0f8488 fffffffffffffdef
[  453.533011] Call Trace:
[  453.533011]  [<ffffffff8196cffb>] dump_stack+0x67/0x9c
[  453.533011]  [<ffffffff81091ee1>] __warn+0x111/0x130
[  453.533011]  [<ffffffff81091f97>] warn_slowpath_fmt+0x97/0xb0
[  453.533011]  [<ffffffff81091f00>] ? __warn+0x130/0x130
[  453.533011]  [<ffffffff8191b789>] ? blk_finish_plug+0x29/0x60
[  453.533011]  [<ffffffff811205d4>] lock_release+0x434/0x670
[  453.533011]  [<ffffffff8198af94>] ? import_single_range+0xd4/0x110
[  453.533011]  [<ffffffff81322195>] ? rw_verify_area+0x65/0x140
[  453.533011]  [<ffffffff813aa696>] ? aio_write+0x1f6/0x280
[  453.533011]  [<ffffffff813aa6c9>] aio_write+0x229/0x280
[  453.533011]  [<ffffffff813aa4a0>] ? aio_complete+0x640/0x640
[  453.533011]  [<ffffffff8111df20>] ? debug_check_no_locks_freed+0x1a0/0x1a0
[  453.533011]  [<ffffffff8114793a>] ? debug_lockdep_rcu_enabled.part.2+0x1a/0x30
[  453.533011]  [<ffffffff81147985>] ? debug_lockdep_rcu_enabled+0x35/0x40
[  453.533011]  [<ffffffff812a92be>] ? __might_fault+0x7e/0xf0
[  453.533011]  [<ffffffff813ac9bc>] do_io_submit+0x94c/0xb10
[  453.533011]  [<ffffffff813ac2ae>] ? do_io_submit+0x23e/0xb10
[  453.533011]  [<ffffffff813ac070>] ? SyS_io_destroy+0x270/0x270
[  453.533011]  [<ffffffff8111d7b3>] ? mark_held_locks+0x23/0xc0
[  453.533011]  [<ffffffff8100201a>] ? trace_hardirqs_on_thunk+0x1a/0x1c
[  453.533011]  [<ffffffff813acb90>] SyS_io_submit+0x10/0x20
[  453.533011]  [<ffffffff824f96aa>] entry_SYSCALL_64_fastpath+0x18/0xad
[  453.533011]  [<ffffffff81119190>] ? trace_hardirqs_off_caller+0xc0/0x110
[  453.533011] ---[ end trace b2fbe664d1cc0082 ]---

Cc: Dmitry Monakhov <dmonakhov@openvz.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Pull dmaengine fixes from Vinod Koul:
 "The fixes this time around are spread over drivers, pretty normal
  update:

   - PCI ID for SKL ioatdma, workaround for SKX and
     ioat_alloc_chan_resources sleepy allocation fix

   - dw kconfig typo fix

   - null pointer deref for stm32

   - MAINTAINERS Update for at_hdmac

   - pl330 runtime pm fixes

   - omap-dma port window fix

   - rcar-dmac unmap slave resource fix"

* tag 'dmaengine-fix-4.10-rc4' of git://git.infradead.org/users/vkoul/slave-dma:
  dmaengine: rcar-dmac: unmap slave resource when channel is freed
  dmaengine: omap-dma: Fix the port_window support
  dmaengine: iota: ioat_alloc_chan_resources should not perform sleeping allocations.
  dmaengine: pl330: Fix runtime PM support for terminated transfers
  MAINTAINERS: dmaengine: Update + Hand over the at_hdmac driver to Ludovic
  dmaengine: omap-dma: Fix dynamic lch_map allocation
  dmaengine: ti-dma-crossbar: Add some 'of_node_put()' in error path.
  dmaengine: stm32-dma: Fix null pointer dereference in stm32_dma_tx_status
  dmaengine: stm32-dma: Set correct args number for DMA request from DT
  dmaengine: dw: fix typo in Kconfig
  dmaengine: ioatdma: workaround SKX ioatdma version
  dmaengine: ioatdma: Add Skylake PCI Dev ID

Pull btrfs fixes from Chris Mason:
 "These are all over the place.

  The tracepoint part of the pull fixes a crash and adds a little more
  information to two tracepoints, while the rest are good old fashioned
  fixes"

* 'for-linus-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
  btrfs: make tracepoint format strings more compact
  Btrfs: add truncated_len for ordered extent tracepoints
  Btrfs: add 'inode' for extent map tracepoint
  btrfs: fix crash when tracepoint arguments are freed by wq callbacks
  Btrfs: adjust outstanding_extents counter properly when dio write is split
  Btrfs: fix lockdep warning about log_mutex
  Btrfs: use down_read_nested to make lockdep silent
  btrfs: fix locking when we put back a delayed ref that's too new
  btrfs: fix error handling when run_delayed_extent_op fails
  btrfs: return the actual error value from  from btrfs_uuid_tree_iterate

Pull ceph fixes from Ilya Dryomov:
 "Two small fixups for the filesystem changes that went into this merge
  window"

* tag 'ceph-for-4.10-rc4' of git://github.com/ceph/ceph-client:
  ceph: fix get_oldest_context()
  ceph: fix mds cluster availability check

Pull VFIO fixes from Alex Williamson:

 - Cleanups and bug fixes for the mtty sample driver (Dan Carpenter)

 - Export and make use of has_capability() to fix incorrect use of
   ns_capable() for testing task capabilities (Jike Song)

* tag 'vfio-v4.10-rc4' of git://github.com/awilliam/linux-vfio:
  vfio/type1: Remove pid_namespace.h include
  vfio iommu type1: fix the testing of capability for remote task
  capability: export has_capability
  vfio-mdev: remove some dead code
  vfio-mdev: buffer overflow in ioctl()
  vfio-mdev: return -EFAULT if copy_to_user() fails

Pull KVM fixes from Paolo Bonzini:

 - fix for module unload vs deferred jump labels (note: there might be
   other buggy modules!)

 - two NULL pointer dereferences from syzkaller

 - also syzkaller: fix emulation of fxsave/fxrstor/sgdt/sidt, problem
   made worse during this merge window, "just" kernel memory leak on
   releases

 - fix emulation of "mov ss" - somewhat serious on AMD, less so on Intel

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: x86: fix emulation of "MOV SS, null selector"
  KVM: x86: fix NULL deref in vcpu_scan_ioapic
  KVM: eventfd: fix NULL deref irqbypass consumer
  KVM: x86: Introduce segmented_write_std
  KVM: x86: flush pending lapic jump label updates on module unload
  jump_labels: API for flushing deferred jump label updates

Pull arm64 fixes from Catalin Marinas:

 - Fix huge_ptep_set_access_flags() to return "changed" when any of the
   ptes in the contiguous range is changed, not just the last one

 - Fix the adr_l assembly macro to work in modules under KASLR

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: assembler: make adr_l work in modules under KASLR
  arm64: hugetlb: fix the wrong return value for huge_ptep_set_access_flags

Discard can return -EIO asynchronously if the alignment for the request
isn't suitable for the driver, which makes a proper fallback to other
methods in __blkdev_issue_zeroout impossible.  Thus only issue a sync
discard from blkdev_issue_zeroout an don't try discard at all from
__blkdev_issue_zeroout as a non-invasive workaround.

One more reason why abusing discard for zeroing must die..
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reported-by: Eryu Guan <eguan@redhat.com>
Fixes: e73c23ff ("block: add async variant of blkdev_issue_zeroout")
Signed-off-by: Jens Axboe <axboe@fb.com>

Now that we have the blk_rq_payload_bytes helper available to determine
the actual I/O size we don't need to mess around with __data_len for
WRITE SAME.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@fb.com>

The new blk_rq_payload_bytes generalizes the payload length hacks
that nvme_map_len did before.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@fb.com>

Without that we'll pass a wrong payload size in cmd->sdb, which
can lead to hangs with drivers that need the total transfer size.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reported-by: Chris Valean <v-chvale@microsoft.com>
Reported-by: Dexuan Cui <decui@microsoft.com>
Fixes: f9d03f96 ("block: improve handling of the magic discard payload")
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@fb.com>

Add a helper to calculate the actual data transfer size for special
payload requests.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

Pull SCSI fixes from James Bottomley:
 "The major fix is the bfa firmware, since the latest 10Gb cards fail
  probing with the current firmware.

  The rest is a set of minor fixes: one missed Kconfig dependency
  causing randconfig failures, a missed error return on an error leg, a
  change for how multiqueue waits on a blocked device and a don't reset
  while in reset fix"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: bfa: Increase requested firmware version to 3.2.5.1
  scsi: snic: Return error code on memory allocation failure
  scsi: fnic: Avoid sending reset to firmware when another reset is in progress
  scsi: qedi: fix build, depends on UIO
  scsi: scsi-mq: Wait for .queue_rq() if necessary

Pull input updates from Dmitry Torokhov:
 "Small driver fixups"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: elants_i2c - avoid divide by 0 errors on bad touchscreen data
  Input: adxl34x - make it enumerable in ACPI environment
  Input: ALPS - fix TrackStick Y axis handling for SS5 hardware
  Input: synaptics-rmi4 - fix F03 build error when serio is module
  Input: xpad - use correct product id for x360w controllers
  Input: synaptics_i2c - change msleep to usleep_range for small msecs
  Input: i8042 - add Pegatron touchpad to noloop table
  Input: joydev - remove unused linux/miscdevice.h include

Using has_capability() rather than ns_capable(), we're no longer using
this header.

Cc: Jike Song <jike.song@intel.com>
Cc: Kirti Wankhede <kwankhede@nvidia.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>

The slave mapping should be removed together with other channel
resources when the channel is freed. If it's not unmapped it will hang
around forever after the channel is freed.

Fixes: 9f878603 ("dmaengine: rcar-dmac: add iommu support for slave transfers")
Reported-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>

Before the mdev enhancement type1 iommu used capable() to test the
capability of current task; in the course of mdev development a
new requirement, testing for another task other than current, was
raised.  ns_capable() was used for this purpose, however it still
tests current, the only difference is, in a specified namespace.

Fix it by using has_capability() instead, which tests the cap for
specified task in init_user_ns, the same namespace as capable().

Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Jike Song <jike.song@intel.com>
Reviewed-by: James Morris <james.l.morris@oracle.com>
Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>

Pull sound fixes from Takashi Iwai:
 "This time we got a few more fixes than the previous rc's, and most of
  commits were about ASoC.

  The only significant change in the core side is the regression fix wrt
  the aux device list handling, and all the rest are driver-specific
  small / trivial fixes"

* tag 'sound-4.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: usb-audio: Add a quirk for Plantronics BT600
  ASoC: rt5645: set sel_i2s_pre_div1 to 2
  ASoC: dpcm: Avoid putting stream state to STOP when FE stream is paused
  ASoC: Intel: Skylake: Release FW ctx in cleanup
  ASoC: Intel: bytcr-rt5640: fix settings in internal clock mode
  ASoC: fsl_ssi: set fifo watermark to more reliable value
  ASoC: nau8825: fix invalid configuration in Pre-Scalar of FLL
  ASoC: nau8825: correct the function name of register
  ASoC: Intel: Skylake: Fix to fail safely if module not available in path
  ASoC: tlv320aic3x: Mark the RESET register as volatile
  ASoC: Fix binding and probing of auxiliary components
  ASoC: wm_adsp: Don't overrun firmware file buffer when reading region data
  ASoC: Intel: bytcr_rt5640: fallback mechanism if MCLK is not enabled
  ASoC: hdmi-codec: use unsigned type to structure members with bit-field
  ASoC: topology: kfree kcontrol->private_value before freeing kcontrol
  ASoC: rsnd: don't double free kctrl
  ASoC: dwc: Fix PIO mode initialization

Pull xfs fixes from Darrick Wong:
 "As promised last week, here's some stability fixes from Christoph and
  Jan Kara:

   - fix free space request handling when low on disk space

   - remove redundant log failure error messages

   - free truncated dirty pages instead of letting them build up
     forever"

* tag 'xfs-for-linus-4.10-rc4-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: Timely free truncated dirty pages
  xfs: don't print warnings when xfs_log_force fails
  xfs: don't rely on ->total in xfs_alloc_space_available
  xfs: adjust allocation length in xfs_alloc_space_available
  xfs: fix bogus minleft manipulations
  xfs: bump up reserved blocks in xfs_alloc_set_aside

Pull remoteproc fixes from Bjorn Andersson:
 "This fixes two regressions that have been reported to be introduced in
  v4.10-rc1.

   - correct an incorrect usage of the kref api

   - revert the change to make the resource table read-only. As the
     space each vdev resource is used as virtio device config space it
     must be shared with the remote"

* tag 'rproc-v4.10-fixes' of git://github.com/andersson/remoteproc:
  Revert "remoteproc: Merge table_ptr and cached_table pointers"
  remoteproc: fix vdev reference management

Pull rpmsg fixes from Bjorn Andersson:
 "This fixes a regression introduced in v4.10-rc1 that prohibits
  multiple channels with the same name but different endpoint addresses
  to be used"

* tag 'rpmsg-v4.10-fixes' of git://github.com/andersson/remoteproc:
  rpmsg: virtio_rpmsg_bus: fix channel creation

Pull HID fixes from Jiri Kosina:

 - device descriptor length validation fix to hid-cypress driver from
   Greg

 - introduction of a short delay into i2c-hid, which is not really
   mandated by the spec, but fixes Asus Touchpads

 - Petzl USB connectable flashlight quirk from myself

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  HID: i2c-hid: Add sleep between POWER ON and RESET
  HID: hid-cypress: validate length of report
  HID: ignore Petzl USB headlamp

Merge branch 'scsi-target-for-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/bvanassche/linux

Pull scsi target fixes from Bart Van Assche:

 - a series of bug fixes for the XCOPY implementation from David
   Disseldorp

 - one bug fix for the ibmvscsis driver, a driver that is used for
   communication between partitions on IBM POWER systems.

* 'scsi-target-for-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/bvanassche/linux:
  ibmvscsis: Fix srp_transfer_data fail return code
  target: support XCOPY requests without parameters
  target: check for XCOPY parameter truncation
  target: use XCOPY segment descriptor CSCD IDs
  target: check XCOPY segment descriptor CSCD IDs
  target: simplify XCOPY wwn->se_dev lookup helper
  target: return UNSUPPORTED TARGET/SEGMENT DESC TYPE CODE sense
  target: bounds check XCOPY total descriptor list length
  target: bounds check XCOPY segment descriptor list
  target: use XCOPY TOO MANY TARGET DESCRIPTORS sense
  target: add XCOPY target/segment desc sense codes

For no snapshot case, we should use ci->truncate_{seq,size}.

Fixes: 5f743e45 ("ceph: record truncate size/seq for snap data writeback")
Signed-off-by: Geng, Jichao <geng.jichao@h3c.com>
Signed-off-by: Yan, Zheng <zyan@redhat.com>

We should apply the check after getting the initial mdsmap.

Fixes: e9e427f0 ("ceph: check availability of mds cluster on mount")
Link: http://tracker.ceph.com/issues/18161Signed-off-by: Yan, Zheng <zyan@redhat.com>

Pull md fixes from Shaohua Li:
 "Basically one fix for raid5 cache which is merged in this cycle,
  others are trival fixes"

* tag 'md/4.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md:
  md/raid5: Use correct IS_ERR() variation on pointer check
  md: cleanup mddev flag clear for takeover
  md/r5cache: fix spelling mistake on "recoverying"
  md/r5cache: assign conf->log before r5l_load_log()
  md/r5cache: simplify handling of sh->log_start in recovery
  md/raid5-cache: removes unnecessary write-through mode judgments
  md/raid10: Refactor raid10_make_request
  md/raid1: Refactor raid1_make_request

When CONFIG_RANDOMIZE_MODULE_REGION_FULL=y, the offset between loaded
modules and the core kernel may exceed 4 GB, putting symbols exported
by the core kernel out of the reach of the ordinary adrp/add instruction
pairs used to generate relative symbol references. So make the adr_l
macro emit a movz/movk sequence instead when executing in module context.

While at it, remove the pointless special case for the stack pointer.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

All block device data fields and functions returning a number of 512B
sectors are by convention named xxx_sectors while names in the form
xxx_size are generally used for a number of bytes. The blk_queue_zone_size
and bdev_zone_size functions were not following this convention so rename
them.

No functional change is introduced by this patch.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>

Collapsed the two patches, they were nonsensically split and broke
bisection.
Signed-off-by: Jens Axboe <axboe@fb.com>

This is CVE-2017-2583.  On Intel this causes a failed vmentry because
SS's type is neither 3 nor 7 (even though the manual says this check is
only done for usable SS, and the dmesg splat says that SS is unusable!).
On AMD it's worse: svm.c is confused and sets CPL to 0 in the vmcb.

The fix fabricates a data segment descriptor when SS is set to a null
selector, so that CPL and SS.DPL are set correctly in the VMCS/vmcb.
Furthermore, only allow setting SS to a NULL selector if SS.RPL < 3;
this in turn ensures CPL < 3 because RPL must be equal to CPL.

Thanks to Andy Lutomirski and Willy Tarreau for help in analyzing
the bug and deciphering the manuals.
Reported-by: Xiaohan Zhang <zhangxiaohan1@huawei.com>
Fixes: 79d5b4c3
Cc: stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

has_capability() is sometimes needed by modules to test capability
for specified task other than current, so export it.

Cc: Kirti Wankhede <kwankhede@nvidia.com>
Signed-off-by: Jike Song <jike.song@intel.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
Acked-by: James Morris <james.l.morris@oracle.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>

Reported by syzkaller:

    BUG: unable to handle kernel NULL pointer dereference at 00000000000001b0
    IP: _raw_spin_lock+0xc/0x30
    PGD 3e28eb067
    PUD 3f0ac6067
    PMD 0
    Oops: 0002 [#1] SMP
    CPU: 0 PID: 2431 Comm: test Tainted: G           OE   4.10.0-rc1+ #3
    Call Trace:
     ? kvm_ioapic_scan_entry+0x3e/0x110 [kvm]
     kvm_arch_vcpu_ioctl_run+0x10a8/0x15f0 [kvm]
     ? pick_next_task_fair+0xe1/0x4e0
     ? kvm_arch_vcpu_load+0xea/0x260 [kvm]
     kvm_vcpu_ioctl+0x33a/0x600 [kvm]
     ? hrtimer_try_to_cancel+0x29/0x130
     ? do_nanosleep+0x97/0xf0
     do_vfs_ioctl+0xa1/0x5d0
     ? __hrtimer_init+0x90/0x90
     ? do_nanosleep+0x5b/0xf0
     SyS_ioctl+0x79/0x90
     do_syscall_64+0x6e/0x180
     entry_SYSCALL64_slow_path+0x25/0x25
    RIP: _raw_spin_lock+0xc/0x30 RSP: ffffa43688973cc0

The syzkaller folks reported a NULL pointer dereference due to
ENABLE_CAP succeeding even without an irqchip.  The Hyper-V
synthetic interrupt controller is activated, resulting in a
wrong request to rescan the ioapic and a NULL pointer dereference.

    #include <sys/ioctl.h>
    #include <sys/mman.h>
    #include <sys/types.h>
    #include <linux/kvm.h>
    #include <pthread.h>
    #include <stddef.h>
    #include <stdint.h>
    #include <stdlib.h>
    #include <string.h>
    #include <unistd.h>

    #ifndef KVM_CAP_HYPERV_SYNIC
    #define KVM_CAP_HYPERV_SYNIC 123
    #endif

    void* thr(void* arg)
    {
	struct kvm_enable_cap cap;
	cap.flags = 0;
	cap.cap = KVM_CAP_HYPERV_SYNIC;
	ioctl((long)arg, KVM_ENABLE_CAP, &cap);
	return 0;
    }

    int main()
    {
	void *host_mem = mmap(0, 0x1000, PROT_READ|PROT_WRITE,
			MAP_PRIVATE|MAP_ANONYMOUS, -1, 0);
	int kvmfd = open("/dev/kvm", 0);
	int vmfd = ioctl(kvmfd, KVM_CREATE_VM, 0);
	struct kvm_userspace_memory_region memreg;
	memreg.slot = 0;
	memreg.flags = 0;
	memreg.guest_phys_addr = 0;
	memreg.memory_size = 0x1000;
	memreg.userspace_addr = (unsigned long)host_mem;
	host_mem[0] = 0xf4;
	ioctl(vmfd, KVM_SET_USER_MEMORY_REGION, &memreg);
	int cpufd = ioctl(vmfd, KVM_CREATE_VCPU, 0);
	struct kvm_sregs sregs;
	ioctl(cpufd, KVM_GET_SREGS, &sregs);
	sregs.cr0 = 0;
	sregs.cr4 = 0;
	sregs.efer = 0;
	sregs.cs.selector = 0;
	sregs.cs.base = 0;
	ioctl(cpufd, KVM_SET_SREGS, &sregs);
	struct kvm_regs regs = { .rflags = 2 };
	ioctl(cpufd, KVM_SET_REGS, &regs);
	ioctl(vmfd, KVM_CREATE_IRQCHIP, 0);
	pthread_t th;
	pthread_create(&th, 0, thr, (void*)(long)cpufd);
	usleep(rand() % 10000);
	ioctl(cpufd, KVM_RUN, 0);
	pthread_join(th, 0);
	return 0;
    }

This patch fixes it by failing ENABLE_CAP if without an irqchip.
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Fixes: 5c919412 (kvm/x86: Hyper-V synthetic interrupt controller)
Cc: stable@vger.kernel.org # 4.5+
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Reported syzkaller:

    BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
    IP: irq_bypass_unregister_consumer+0x9d/0xb70 [irqbypass]
    PGD 0

    Oops: 0002 [#1] SMP
    CPU: 1 PID: 125 Comm: kworker/1:1 Not tainted 4.9.0+ #1
    Workqueue: kvm-irqfd-cleanup irqfd_shutdown [kvm]
    task: ffff9bbe0dfbb900 task.stack: ffffb61802014000
    RIP: 0010:irq_bypass_unregister_consumer+0x9d/0xb70 [irqbypass]
    Call Trace:
     irqfd_shutdown+0x66/0xa0 [kvm]
     process_one_work+0x16b/0x480
     worker_thread+0x4b/0x500
     kthread+0x101/0x140
     ? process_one_work+0x480/0x480
     ? kthread_create_on_node+0x60/0x60
     ret_from_fork+0x25/0x30
    RIP: irq_bypass_unregister_consumer+0x9d/0xb70 [irqbypass] RSP: ffffb61802017e20
    CR2: 0000000000000008

The syzkaller folks reported a NULL pointer dereference that due to
unregister an consumer which fails registration before. The syzkaller
creates two VMs w/ an equal eventfd occasionally. So the second VM
fails to register an irqbypass consumer. It will make irqfd as inactive
and queue an workqueue work to shutdown irqfd and unregister the irqbypass
consumer when eventfd is closed. However, the second consumer has been
initialized though it fails registration. So the token(same as the first
VM's) is taken to unregister the consumer through the workqueue, the
consumer of the first VM is found and unregistered, then NULL deref incurred
in the path of deleting consumer from the consumers list.

This patch fixes it by making irq_bypass_register/unregister_consumer()
looks for the consumer entry based on consumer pointer itself instead of
token matching.
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Suggested-by: Alex Williamson <alex.williamson@redhat.com>
Cc: stable@vger.kernel.org
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Introduces segemented_write_std.

Switches from emulated reads/writes to standard read/writes in fxsave,
fxrstor, sgdt, and sidt.  This fixes CVE-2017-2584, a longstanding
kernel memory leak.

Since commit 283c95d0 ("KVM: x86: emulate FXSAVE and FXRSTOR",
2016-11-09), which is luckily not yet in any final release, this would
also be an exploitable kernel memory *write*!
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: stable@vger.kernel.org
Fixes: 96051572
Fixes: 283c95d0Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Steve Rutherford <srutherford@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM's lapic emulation uses static_key_deferred (apic_{hw,sw}_disabled).
These are implemented with delayed_work structs which can still be
pending when the KVM module is unloaded. We've seen this cause kernel
panics when the kvm_intel module is quickly reloaded.

Use the new static_key_deferred_flush() API to flush pending updates on
module unload.
Signed-off-by: David Matlack <dmatlack@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Modules that use static_key_deferred need a way to synchronize with
any delayed work that is still pending when the module is unloaded.
Introduce static_key_deferred_flush() which flushes any pending
jump label updates.
Signed-off-by: David Matlack <dmatlack@google.com>
Cc: stable@vger.kernel.org
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Support for the Asus Touchpad was recently added. It turns out this
device can fail initialisation (and become unusable) when the RESET
command is sent too soon after the POWER ON command.

Unfortunately the i2c-hid specification does not specify the need for
a delay between these two commands. But it was discovered the Windows
driver has a 1ms delay.

As a result, this patch modifies the i2c-hid module to add a sleep
inbetween the POWER ON and RESET commands which lasts between 1ms and 5ms.

See https://github.com/vlasenko/hid-asus-dkms/issues/24 for further
details.
Signed-off-by: Brendan McGrath <redmcg@redmandi.dyndns.org>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>