If we bring the recorded perf data together with kernel binary from another
machine using:

	on server A:
	perf archive

	on server B:
	tar xjvf perf.data.tar.bz2 -C ~/.debug

the build_id kernel dso is not properly recognized during the "perf report"
command on server B.

The reason is, that build_id dsos are added during the session initialization,
while the kernel maps are created during the sample event processing.

The machine__create_kernel_maps functions ends up creating new dso object for
kernel, but it does not check if we already have one added by build_id
processing.

Also the build_id reading ABI quirk added in commit:

 - commit b2511481
   perf build-id: Add quirk to deal with perf.data file format breakage

populates the "struct build_id_event::pid" with 0, which
is later interpreted as DEFAULT_GUEST_KERNEL_ID.

This is not always correct, so it's better to guess the pid
value based on the "struct build_id_event::header::misc" value.

- Tested with data generated on x86 kernel version v2.6.34
  and reported back on x86_64 current kernel.
- Not tested for guest kernel case.

Note the problem stays for PERF_RECORD_MMAP events recorded by perf that
does not use proper pid (HOST_KERNEL_ID/DEFAULT_GUEST_KERNEL_ID). They are
misinterpreted within the current perf code. Probably there's not much we
can do about that.

Cc: Avi Kivity <avi@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Yanmin Zhang <yanmin_zhang@linux.intel.com>
Link: http://lkml.kernel.org/r/20110601194346.GB1934@jolsa.brq.redhat.comSigned-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

It will be immediately replaced in perf_top_browser__run.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-q7e2jzb44elqpkvdllk94x0i@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The external symbol files are generated by JIT compilers, for example, but we
need to make sure they're ours before injecting them to 'perf report'.
Requested-by: Ingo Molnar <mingo@elte.hu>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1312919658-17158-1-git-send-email-penberg@kernel.orgSigned-off-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The 'perf sched' command usage still showing 'trace' command instead of
the 'script' command.

Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20110809124651.GD2056@jolsa.brq.redhat.comSigned-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The session object is released prematurely when processing events for
latency command. The session's thread objects are used within the
output_lat_thread function.

Runnning following commands:

 # perf sched record
 # perf sched latency

the latter displays incorrect data and might cause access violation.

Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1312837414-3819-1-git-send-email-jolsa@redhat.comSigned-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Just like we do already for perf.data files.
Requested-by: Ingo Molnar <mingo@elte.hu>
Cc: Ben Hutchings <ben@decadent.org.uk>
Cc: Christian Ohm <chr.ohm@gmx.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jonathan Nieder <jrnieder@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-qgokmxsmvppwpc5404qhyk7e@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Adding install-python_ext target to install python extension related
files.  Installation directory is governed by python distutils package
and follows the DESTDIR variable settings.

Also moving python extension build output into '$(O)python_ext_build'
directory and making it configurable via PYTHON_EXTBUILD variable.

Keeping the '$(O)python/perf.so' file, so it could be used for testing
as of until now.

Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20110722113307.GA1931@jolsa.brq.redhat.comSigned-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

In addition to /etc/perfconfig and $HOME/.perfconfig, perf looks for
configuration in the file ./config, imitating git which looks at
$GIT_DIR/config.  If ./config is not a perf configuration file, it
fails, or worse, treats it as a configuration file and changes behavior
in some unexpected way.

"config" is not an unusual name for a file to be lying around and perf
does not have a private directory dedicated for its own use, so let's
just stop looking for configuration in the cwd.  Callers needing
context-sensitive configuration can use the PERF_CONFIG environment
variable.
Requested-by: Christian Ohm <chr.ohm@gmx.net>
Cc: 632923@bugs.debian.org
Cc: Ben Hutchings <ben@decadent.org.uk>
Cc: Christian Ohm <chr.ohm@gmx.net>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20110805165838.GA7237@elie.gateway.2wire.netSigned-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Use LIB_OBJS and BUILTIN_OBJS for .o files.

LIB_FILE is already prefixed with OUTPUT.

Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20110807083932.9C0E514C03B@msa103.auone-net.jpSigned-off-by: Kusanagi Kouichi <slash@ac.auone-net.jp>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Looks to me like the :r modifier is not supported anymore, so remove it
from the list of events. Without this fix 'perf lock record' doesn't
work.

Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Zhu Yanhai <gaoyang.zyh@taobao.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1312035232-9534-1-git-send-email-gaoyang.zyh@taobao.comSigned-off-by: Zhu Yanhai <gaoyang.zyh@taobao.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf will coredump if the user doesn't give the "-m" option in probe
command, this patch fixes it.

[root@localhost perf]# ./perf probe --add='PROBE'
Segmentation fault (core dumped)

Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1311602888-2389-1-git-send-email-bookjovi@gmail.comSigned-off-by: Jovi Zhang <bookjovi@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

So that we get a proper warning in the TUI in cases like:

 $ perf report --stdio -g fractal,0.5,caller --sort pid
 Selected -g but no callchain data. Did you call 'perf record' without -g?
 $

The --stdio case is ok because it uses fprintf, ui__warning is needed to
figure out if --stdio or --tui is being used.

Cc: Arun Sharma <asharma@fb.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sam Liao <phyomh@gmail.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-ag9fz2wd17mbbfjsbznq1wms@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

So those friggin "spurious" PERF_RECORD_MMAP events were actually a
brain fart copy'n'paste error in the python binding, doh. I.e. they
weren't MMAPs, just SAMPLEs.

Fix it by providing routines for these events instead of using the MMAP
ones.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-b0rc8y5jd03f9f11kftodvkm@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

To remove the last case of access to the FD() macro outside the library.

Inspired by a patch by Borislav that moved the FD() macro to util.h, for
namespace concerns I rather preferred to constrain it to ev{sel,list}.c.

Cc: Borislav Petkov <bp@amd64.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-qn893qsstcg366tkucu649qj@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The readlink() function doesn't append a null byte to buf. So we should
zero out buf with zalloc(). Or we'll see sometimes error like this:

[root@intel-s3e36-01]~# /usr/bin/perf buildid-cache -a /lib/modules/2.6.32-130.el6.x86_64/kernel/crypto/twofish_common.ko -v
Adding f64ba8efd5f53c7ad332fc17db1d21de309038e1 /lib/modules/2.6.32-130.el6.x86_64/kernel/crypto/twofish_common.ko: Ok
[root@intel-s3e36-01]~# /usr/bin/perf buildid-cache -r /lib/modules/2.6.32-130.el6.x86_64/kernel/crypto/twofish_common.ko -v
Removing f64ba8efd5f53c7ad332fc17db1d21de309038e1 /lib/modules/2.6.32-130.el6.x86_64/kernel/crypto/twofish_common.ko: FAIL
/lib/modules/2.6.32-130.el6.x86_64/kernel/crypto/twofish_common.ko wasn't in the cache

The change in build_id_cache__add_s() is a defense.
Tested-by: Jiri Olsa <jolsa@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20110718031314.GA5802@hpt.nay.redhat.comSigned-off-by: Han Pingtian <phan@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

In commit a8b0ca17 ("perf: Remove the nmi parameter from the
swevent and overflow interface") one site was overlooked.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20110708173442.GB31972@e102144-lin.cambridge.arm.comSigned-off-by: Ingo Molnar <mingo@elte.hu>

copy_from_user_nmi() is used in oprofile and perf. Moving it to other
library functions like copy_from_user(). As this is x86 code for 32
and 64 bits, create a new file usercopy.c for unified code.
Signed-off-by: Robert Richter <robert.richter@amd.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20110607172413.GJ20052@erda.amd.comSigned-off-by: Ingo Molnar <mingo@elte.hu>

PMU type id can be allocated dynamically, so perf_event_attr::type check
when copying attribute from userspace to kernel is not valid.
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Cc: Robert Richter <robert.richter@amd.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1309421396-17438-4-git-send-email-ming.m.lin@intel.comSigned-off-by: Ingo Molnar <mingo@elte.hu>

This patch:

 - fixes typos in comments and clarifies the text
 - renames obscure p4_event_alias::original and ::alter members to
   ::original and ::alternative as appropriate
 - drops parenthesis from the return of p4_get_alias_event()

No functional changes.
Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Link: http://lkml.kernel.org/r/20110721160625.GX7492@sunSigned-off-by: Ingo Molnar <mingo@elte.hu>

Use preset debugfs path instead of hardcoded one.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: acme@redhat.com
Cc: a.p.zijlstra@chello.nl
Cc: paulus@samba.org
Link: http://lkml.kernel.org/r/1310635534-4013-4-git-send-email-jolsa@redhat.comSigned-off-by: Ingo Molnar <mingo@elte.hu>

Adding builtin test for parse_events function, which is
responsible for parsing/processing "-e" option for
stat/top/record commands.

This new test will run within the builtin test command suite
(perf test).

One or several tests were added for each type of event.
More tests could be added easily if needed.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: acme@redhat.com
Cc: a.p.zijlstra@chello.nl
Cc: paulus@samba.org
Link: http://lkml.kernel.org/r/1310635534-4013-3-git-send-email-jolsa@redhat.comSigned-off-by: Ingo Molnar <mingo@elte.hu>

Moving out the option parameter from parse_events function,
and adding new parse_events_option function instead.

The option parameter is used only to carry "struct perf_evlist"
pointer for chaining new events. Putting it away, enable us
to call parse_events from other places without using the
option parameter.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: acme@redhat.com
Cc: a.p.zijlstra@chello.nl
Cc: paulus@samba.org
Link: http://lkml.kernel.org/r/1310635534-4013-2-git-send-email-jolsa@redhat.comSigned-off-by: Ingo Molnar <mingo@elte.hu>

Non-callchain path is using al.addr which prints as:
  openssl 14564 17672.003587:       7862d _x86_64_AES_encrypt_compact

This should be sample->ip to print as:
  openssl 14564 17672.003587:  3f7867862d _x86_64_AES_encrypt_compact
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: acme@ghostprotocols.net
Cc: peterz@infradead.org
Cc: paulus@samba.org
Link: http://lkml.kernel.org/r/1306768587-15376-1-git-send-email-dsahern@gmail.comSigned-off-by: Ingo Molnar <mingo@elte.hu>

The perf_event_attr struct has two __u32's at the top and
they need to be swapped individually.

With this change I was able to analyze a perf.data collected in a
32-bit PPC VM on an x86 system. I tested both 32-bit and 64-bit
binaries for the Intel analysis side; both read the PPC perf.data
file correctly.

-v2:
 - changed the existing perf_event__attr_swap() to swap only elements
   of perf_event_attr and exported it for use in swapping the
   attributes in the file header
 - updated swap_ops used for processing events
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: acme@ghostprotocols.net
Cc: peterz@infradead.org
Cc: paulus@samba.org
Cc: <stable@kernel.org>
Link: http://lkml.kernel.org/r/1310754849-12474-1-git-send-email-dsahern@gmail.comSigned-off-by: Ingo Molnar <mingo@elte.hu>

Add "node" as a simple alias for NODE cache events.

The addition of NODE cache events broke the parse_alias
function, so any mismatched event caused the segfault, like:

  # ./perf stat -e krava ls

The hw_cache/hw_cache_op/hw_cache_result arrays needs to follow
PERF_COUNT_HW_CACHE_*MAX enums. Adding those MAXs to be size
of those arrays, so possible ommision in future wil not lead to
segfault.

Adding read/write/prefetch as allowed operations for node cache
event.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: acme@redhat.com
Link: http://lkml.kernel.org/r/20110713205818.GB7827@jolsa.brq.redhat.comSigned-off-by: Ingo Molnar <mingo@elte.hu>

Merge branch 'tip/perf/core' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-trace into perf/core

Merge reason: pick up the latest fixes - they won't make v3.0.
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Support adding probes on offline kernel modules. This enables
perf-probe to trace kernel-module init functions via perf-probe.
If user gives the path of module with -m option, perf-probe
expects the module is offline.
This feature works with --add, --funcs, and --vars.

E.g)
 # perf probe -m /lib/modules/`uname -r`/kernel/fs/btrfs/btrfs.ko \
   -a "extent_io_init:5 extent_state_cache"
 Add new events:
   probe:extent_io_init (on extent_io_init:5 with extent_state_cache)
   probe:extent_io_init_1 (on extent_io_init:5 with extent_state_cache)

 You can now use it on all perf tools, such as:

         perf record -e probe:extent_io_init_1 -aR sleep 1
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Link: http://lkml.kernel.org/r/20110627072751.6528.10230.stgit@fedora15Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

Add probed module name and ":" in front of function name
if -m module option is given. In the result, the symbol
name passed to kprobe-tracer becomes MODULE:FUNCTION,
so that kallsyms can solve it as a symbol in the module
correctly.
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Link: http://lkml.kernel.org/r/20110627072745.6528.26416.stgit@fedora15Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

Introduce debuginfo to encapsulate dwarf information.
This new object allows us to reuse and expand debuginfo easily.
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Link: http://lkml.kernel.org/r/20110627072739.6528.12438.stgit@fedora15Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

Move dwarf library related routines to dwarf-aux.{c,h}.
This includes several minor changes.
- Add simple documents for each API.
- Rename die_find_real_subprogram() to die_find_realfunc()
- Rename line_walk_handler_t to line_walk_callback_t.
- Minor cleanups.
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Link: http://lkml.kernel.org/r/20110627072727.6528.57647.stgit@fedora15Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

Since there are dwarf_bitsize, dwarf_bitoffset and dwarf_bytesize
defined in libdw, we don't need die_get_bit_size, die_get_bit_offset
and die_get_byte_size anymore.
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Link: http://lkml.kernel.org/r/20110627072721.6528.2747.stgit@fedora15Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

Since strtailcmp() is enough generic, it should be defined in string.c.
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Link: http://lkml.kernel.org/r/20110627072715.6528.10677.stgit@fedora15Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

Since die_find/walk* callbacks use DIE_FIND_CB_FOUND for
both of failed and found cases, it should be "END"
instead "FOUND" for avoiding confusion.
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Reported-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@elte.hu>
Link: http://lkml.kernel.org/r/20110627072709.6528.45706.stgit@fedora15Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

Since the address of a module-local variable can only be
solved after the target module is loaded, the symbol
fetch-argument should be updated when loading target
module.
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: http://lkml.kernel.org/r/20110627072703.6528.75042.stgit@fedora15Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

To support probing module init functions, kprobe-tracer allows
user to define a probe on non-existed function when it is given
with a module name. This also enables user to set a probe on
a function on a specific module, even if a same name (but different)
function is locally defined in another module.

The module name must be in the front of function name and separated
by a ':'. e.g. btrfs:btrfs_init_sysfs
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: http://lkml.kernel.org/r/20110627072656.6528.89970.stgit@fedora15Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

Return -ENOENT if probe point doesn't exist, but still returns
-EINVAL if both of kprobe->addr and kprobe->symbol_name are
specified or both are not specified.
Acked-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Link: http://lkml.kernel.org/r/20110627072650.6528.67329.stgit@fedora15Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

Merge redundant enable/disable functions into enable_trace_probe()
and disable_trace_probe().
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: yrl.pp-manager.tt@hitachi.com
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Link: http://lkml.kernel.org/r/20110627072644.6528.26910.stgit@fedora15

[ converted kprobe selftest to use  enable_trace_probe ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

Enabling function tracer to trace all functions, then load a module and
then disable function tracing will cause ftrace to fail.

This can also happen by enabling function tracing on the command line:

  ftrace=function

and during boot up, modules are loaded, then you disable function tracing
with 'echo nop > current_tracer' you will trigger a bug in ftrace that
will shut itself down.

The reason is, the new ftrace code keeps ref counts of all ftrace_ops that
are registered for tracing. When one or more ftrace_ops are registered,
all the records that represent the functions that the ftrace_ops will
trace have a ref count incremented. If this ref count is not zero,
when the code modification runs, that function will be enabled for tracing.
If the ref count is zero, that function will be disabled from tracing.

To make sure the accounting was working, FTRACE_WARN_ON()s were added
to updating of the ref counts.

If the ref count hits its max (> 2^30 ftrace_ops added), or if
the ref count goes below zero, a FTRACE_WARN_ON() is triggered which
disables all modification of code.

Since it is common for ftrace_ops to trace all functions in the kernel,
instead of creating > 20,000 hash items for the ftrace_ops, the hash
count is just set to zero, and it represents that the ftrace_ops is
to trace all functions. This is where the issues arrise.

If you enable function tracing to trace all functions, and then add
a module, the modules function records do not get the ref count updated.
When the function tracer is disabled, all function records ref counts
are subtracted. Since the modules never had their ref counts incremented,
they go below zero and the FTRACE_WARN_ON() is triggered.

The solution to this is rather simple. When modules are loaded, and
their functions are added to the the ftrace pool, look to see if any
ftrace_ops are registered that trace all functions. And for those,
update the ref count for the module function records.
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

Rename probe_* to trace_probe_* for avoiding namespace
confliction. This also fixes improper names of find_probe_event()
and cleanup_all_probes() to find_trace_probe() and
release_all_trace_probes() respectively.
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/20110627072636.6528.60374.stgit@fedora15Signed-off-by: Steven Rostedt <rostedt@goodmis.org>