- 31 Mar, 2015 6 commits
-
-
Anton Nayshtut authored
Before commit 3900f290 ("bonding: slight optimizztion for bond_slave_override()") the override logic was to send packets with non-zero queue_id through the slave with corresponding queue_id, under two conditions only - if the slave can transmit and it's up. The above mentioned commit changed this logic by introducing an additional condition - whether the bond is active (indirectly, using the slave_can_tx and later - bond_is_active_slave), that prevents the user from implementing more complex policies according to the Documentation/networking/bonding.txt. Signed-off-by:
Anton Nayshtut <anton@swortex.com> Signed-off-by:
Alexey Bogoslavsky <alexey@swortex.com> Signed-off-by:
Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Jiri Benc says: ==================== ipvlan: list corruption and rcu fixes This patch set fixes different issues leading to corrupted lists and incorrect rcu usage. ==================== Signed-off-by: -
Jiri Benc authored
When an ipvlan interface is down, its addresses are not on the hash list. Fix checks for existence of addresses not to depend on the hash list, walk through all interface addresses instead. Signed-off-by:
Jiri Benc <jbenc@redhat.com> Acked-by:
Mahesh Bandewar <maheshb@google.com> Signed-off-by:
-
Jiri Benc authored
All accesses to ipvlan->addrs are under rtnl. Signed-off-by:
-
Jiri Benc authored
Adding and removing to the 'ipvlans' list is already done using _rcu list operations. Signed-off-by:
-
Jiri Benc authored
When ipvlan interface with IP addresses attached is brought down and then deleted, the assigned addresses are deleted twice from the address hash list, first on the interface down and second on the link deletion. Similarly, when an address is added while the interface is down, it is added second time once the interface is brought up. When the interface is down, the addresses should be kept off the hash list for performance reasons. Ensure this is true, which also fixes the double add problem. To fix the double free, check whether the address is hashed before removing it. Reported-by:
Dan Williams <dcbw@redhat.com> Signed-off-by:
-
- 29 Mar, 2015 10 commits
-
-
Uwe Kleine-König authored
The FEC modules used on i.MX28 and newer have a register to tune the MDIO output hold time that should be at least 10 ns. Up to now this value was not explicitly set and so resulted in less hold time if the fec clock was faster than 100 MHz. This was noticed on an i.MX28 machine that uses an input clock of ~150 Mhz which resulted in unreliable communication with a Marvell switch. Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by:
-
Alexey Kodanev authored
tcp_v6_fill_cb() will be called twice if socket's state changes from TCP_TIME_WAIT to TCP_LISTEN. That can result in control buffer data corruption because in the second tcp_v6_fill_cb() call it's not copying IP6CB(skb) anymore, but 'seq', 'end_seq', etc., so we can get weird and unpredictable results. Performance loss of up to 1200% has been observed in LTP/vxlan03 test. This can be fixed by copying inet6_skb_parm to the beginning of 'cb' only if xfrm6_policy_check() and tcp_v6_fill_cb() are going to be called again. Fixes: 2dc49d16 ("tcp6: don't move IP6CB before xfrm6_policy_check()") Signed-off-by:
Alexey Kodanev <alexey.kodanev@oracle.com> Acked-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Hariprasad Shenai authored
Fixes sparse warnings introduced in commit e85c9a7a ("cxgb4/cxgb4vf: Add code to calculate T5 BAR2 Offsets for SGE Queue Registers") and df64e4d3 ("cxgb4/cxgb4vf: Use new interfaces to calculate BAR2 SGE Queue Register addresses") and few old ones sparse warnings: >> drivers/net/ethernet/chelsio/cxgb4vf/sge.c:1006:48: sparse: cast removes >> address space of expression >> drivers/net/ethernet/chelsio/cxgb4vf/sge.c:1006:48: sparse: incorrect type in >> initializer (different address space) >> drivers/net/ethernet/chelsio/cxgb4vf/sge.c:1020:40: sparse: incorrect type in >> argument 1 (different base types) Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Reported-by:
kbuild test robot <fengguang.wu@intel.com> Signed-off-by:
Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by:
-
Nicolas Dichtel authored
With the current code, ids are removed too early. Suppose you have an ipip interface that stands in the netns foo and its link part in the netns bar (so the netns bar has an nsid into the netns foo). Now, you remove the netns bar: - the bar nsid into the netns foo is removed - the netns exit method of ipip is called, thus our ipip iface is removed: => a netlink message is sent in the netns foo to advertise this deletion => this netlink message requests an nsid for bar, thus a new nsid is allocated for bar and never removed. We must remove nsids when we are sure that nobody will refer to netns currently cleaned. Fixes: 0c7aecd4 ("netns: add rtnl cmd to add and get peer netns ids") Signed-off-by:Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by:
-
David S. Miller authored
Hariprasad Shenai says: ==================== cxgb4: Fixes ingress queue mapping and other fixes The below series fixes ingress queue mapping by allocating them dynamically to prevent stack overflow. Disable napi and interrupts before unregistering netdev to avoid crash while unloading driver when traffic is flowing. The patches series is created against 'net' tree. And includes patches on cxgb4 driver. We have included all the maintainers of respective drivers. Kindly review the change and let us know in case of any review comments. ==================== Signed-off-by: -
Hariprasad Shenai authored
Disable interrupts and quiesce rx before unregistering net device to avoid crash while unloading driver when traffic is flowing through. Based on original work by Shameem Khalid <shameem@chelsio.com> Signed-off-by:
-
Hariprasad Shenai authored
QIDs (egress/ingress) from firmware in FW_*_CMD.alloc command can be anywhere in the range from EQ(IQFLINT)_START to EQ(IQFLINT)_END. For eg, in the first load eqid can be from 100 to 300. In the next load it can be from 301 to 500 (assume eq_start is 100 and eq_end is 1000). The driver was assuming them to always start from EQ(IQFLINT)_START till MAX_EGRQ(INGQ). This was causing stack overflow and subsequent crash. Fixed it by dynamically allocating memory (of qsize (x_END - x_START + 1)) for these structures. Based on original work by Santosh Rastapur <santosh@chelsio.com> Signed-off-by:
-
WANG Cong authored
Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
Ben Hutchings authored
cdc_ncm disagrees with usbnet about how much framing overhead should be counted in the tx_bytes statistics, and tries 'fix' this by decrementing tx_bytes on the transmit path. But statistics must never be decremented except due to roll-over; this will thoroughly confuse user-space. Also, tx_bytes is only incremented by usbnet in the completion path. Fix this by requiring drivers that set FLAG_MULTI_FRAME to set a tx_bytes delta along with the tx_packets count. Fixes: beeecd42 ("net: cdc_ncm/cdc_mbim: adding NCM protocol statistics") Signed-off-by:
Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by:
Bjørn Mork <bjorn@mork.no>
-
Ben Hutchings authored
Currently the usbnet core does not update the tx_packets statistic for drivers with FLAG_MULTI_PACKET and there is no hook in the TX completion path where they could do this. cdc_ncm and dependent drivers are bumping tx_packets stat on the transmit path while asix and sr9800 aren't updating it at all. Add a packet count in struct skb_data so these drivers can fill it in, initialise it to 1 for other drivers, and add the packet count to the tx_packets statistic on completion. Signed-off-by:
-
- 25 Mar, 2015 2 commits
-
-
Hariprasad Shenai authored
Fixes below warning by dynamically allocating memory All warnings: drivers/net/ethernet/chelsio/cxgb4/cxgb4_debugfs.c: In function 'cctrl_tbl_show': >> drivers/net/ethernet/chelsio/cxgb4/cxgb4_debugfs.c:689:1: warning: the >> frame >> size of 1028 bytes is larger than 1024 bytes [-Wframe-larger-than=] Reported-by:
-
D.S. Ljungmark authored
A local route may have a lower hop_limit set than global routes do. RFC 3756, Section 4.2.7, "Parameter Spoofing" > 1. The attacker includes a Current Hop Limit of one or another small > number which the attacker knows will cause legitimate packets to > be dropped before they reach their destination. > As an example, one possible approach to mitigate this threat is to > ignore very small hop limits. The nodes could implement a > configurable minimum hop limit, and ignore attempts to set it below > said limit. Signed-off-by:
D.S. Ljungmark <ljungmark@modio.se> Acked-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
-
- 24 Mar, 2015 10 commits
-
-
Cliff Clark authored
ucc_geth was indicating link up after a port is administratively enabled even when nothing is plugged in. This causes user-space tools to see a spurious link up the first time after boot. Signed-off-by:
Cliff Clark <cliff_clark@selinc.com> Signed-off-by:
-
David S. Miller authored
Or Gerlitz says: ==================== mlx4 driver RC fixes Ido's patch should go to -stable of >= 3.14 too, the issue is older but it hits us with VXLAN for which driver support dates there. As for Jack's fix, for the time being, picking it to 4.0 is OK. ==================== Signed-off-by: -
Jack Morgenstein authored
We occasionally see in procedure mlx4_GEN_EQE that the driver tries to grab an uninitialized mutex. This can occur in only one of two ways: 1. We are trying to generate an async event on an uninitialized slave. 2. We are trying to generate an async event on an illegal slave number ( < 0 or > persist->num_vfs) or an inactive slave. To deal with #1: move the mutex initialization from specific slave init sequence in procedure mlx_master_do_cmd to mlx4_multi_func_init() (so that the mutex is always initialized for all slaves). To deal with #2: check in procedure mlx4_GEN_EQE that the slave number provided is in the proper range and that the slave is active. Signed-off-by:
Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by:
Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by:
-
Ido Shamay authored
Netdevice registration should be performed a the end of the driver initialization flow. If we don't do that, after calling register_netdevice, device callbacks may be issued by higher layers of the stack before final configuration of the device is done. For example (VXLAN configuration race), mlx4_SET_PORT_VXLAN was issued after the register_netdev command. System network scripts may configure the interface (UP) right after the registration, which also attach unicast VXLAN steering rule, before mlx4_SET_PORT_VXLAN was called, causing the firmware to fail the rule attachment. Fixes: 837052d0 ("net/mlx4_en: Add netdev support for TCP/IP offloads of vxlan tunneling") Signed-off-by:
Ido Shamay <idos@mellanox.com> Signed-off-by:
-
David S. Miller authored
Merge tag 'wireless-drivers-for-davem-2015-03-24' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers iwlwifi: * avoid panic with lots of IBSS stations * Fix dvm's behavior after suspend resume * Allow to keep connection after CSA failure * Remove a noisy by harmless WARN_ON * New device IDs rtlwifi: * fix IOMMU mapping leak in AP mode brcmfmac: * disable MBSS feature for BCM43362 to get AP mode working again ath9k: * disable Transmit Power Control (TPC) again due to regressions * fix beaconing issue with AP+STA setup Signed-off-by:
-
Simon Horman authored
Master change notifications may occur other than when joining or leaving a bridge, for example when being added to or removed from a bond or Open vSwitch. Previously in those cases rocker_port_bridge_leave() was called which results in a null-pointer dereference as rocker_port->bridge_dev is NULL because there is no bridge device. This patch makes provision for doing nothing in such cases. Fixes: 6c707945 ("rocker: implement L2 bridge offloading") Acked-by:
Jiri Pirko <jiri@resnulli.us> Acked-by:
Scott Feldman <sfeldma@gmail.com> Signed-off-by:
Simon Horman <simon.horman@netronome.com> Signed-off-by:
-
WANG Cong authored
In case we move the whole dev group to another netns, we should call for_each_netdev_safe(), otherwise we get a soft lockup: NMI watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [ip:798] irq event stamp: 255424 hardirqs last enabled at (255423): [<ffffffff81a2aa95>] restore_args+0x0/0x30 hardirqs last disabled at (255424): [<ffffffff81a2ad5a>] apic_timer_interrupt+0x6a/0x80 softirqs last enabled at (255422): [<ffffffff81079ebc>] __do_softirq+0x2c1/0x3a9 softirqs last disabled at (255417): [<ffffffff8107a190>] irq_exit+0x41/0x95 CPU: 0 PID: 798 Comm: ip Not tainted 4.0.0-rc4+ #881 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 task: ffff8800d1b88000 ti: ffff880119530000 task.ti: ffff880119530000 RIP: 0010:[<ffffffff810cad11>] [<ffffffff810cad11>] debug_lockdep_rcu_enabled+0x28/0x30 RSP: 0018:ffff880119533778 EFLAGS: 00000246 RAX: ffff8800d1b88000 RBX: 0000000000000002 RCX: 0000000000000038 RDX: 0000000000000000 RSI: ffff8800d1b888c8 RDI: ffff8800d1b888c8 RBP: ffff880119533778 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 000000000000b5c2 R12: 0000000000000246 R13: ffff880119533708 R14: 00000000001d5a40 R15: ffff88011a7d5a40 FS: 00007fc01315f740(0000) GS:ffff88011a600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 00007f367a120988 CR3: 000000011849c000 CR4: 00000000000007f0 Stack: ffff880119533798 ffffffff811ac868 ffffffff811ac831 ffffffff811ac828 ffff8801195337c8 ffffffff811ac8c9 ffff8801195339b0 ffff8801197633e0 0000000000000000 ffff8801195339b0 ffff8801195337d8 ffffffff811ad2d7 Call Trace: [<ffffffff811ac868>] rcu_read_lock+0x37/0x6e [<ffffffff811ac831>] ? rcu_read_unlock+0x5f/0x5f [<ffffffff811ac828>] ? rcu_read_unlock+0x56/0x5f [<ffffffff811ac8c9>] __fget+0x2a/0x7a [<ffffffff811ad2d7>] fget+0x13/0x15 [<ffffffff811be732>] proc_ns_fget+0xe/0x38 [<ffffffff817c7714>] get_net_ns_by_fd+0x11/0x59 [<ffffffff817df359>] rtnl_link_get_net+0x33/0x3e [<ffffffff817df3d7>] do_setlink+0x73/0x87b [<ffffffff810b28ce>] ? trace_hardirqs_off+0xd/0xf [<ffffffff81a2aa95>] ? retint_restore_args+0xe/0xe [<ffffffff817e0301>] rtnl_newlink+0x40c/0x699 [<ffffffff817dffe0>] ? rtnl_newlink+0xeb/0x699 [<ffffffff81a29246>] ? _raw_spin_unlock+0x28/0x33 [<ffffffff8143ed1e>] ? security_capable+0x18/0x1a [<ffffffff8107da51>] ? ns_capable+0x4d/0x65 [<ffffffff817de5ce>] rtnetlink_rcv_msg+0x181/0x194 [<ffffffff817de407>] ? rtnl_lock+0x17/0x19 [<ffffffff817de407>] ? rtnl_lock+0x17/0x19 [<ffffffff817de44d>] ? __rtnl_unlock+0x17/0x17 [<ffffffff818327c6>] netlink_rcv_skb+0x4d/0x93 [<ffffffff817de42f>] rtnetlink_rcv+0x26/0x2d [<ffffffff81830f18>] netlink_unicast+0xcb/0x150 [<ffffffff8183198e>] netlink_sendmsg+0x501/0x523 [<ffffffff8115cba9>] ? might_fault+0x59/0xa9 [<ffffffff817b5398>] ? copy_from_user+0x2a/0x2c [<ffffffff817b7b74>] sock_sendmsg+0x34/0x3c [<ffffffff817b7f6d>] ___sys_sendmsg+0x1b8/0x255 [<ffffffff8115c5eb>] ? handle_pte_fault+0xbd5/0xd4a [<ffffffff8100a2b0>] ? native_sched_clock+0x35/0x37 [<ffffffff8109e94b>] ? sched_clock_local+0x12/0x72 [<ffffffff8109eb9c>] ? sched_clock_cpu+0x9e/0xb7 [<ffffffff810cadbf>] ? rcu_read_lock_held+0x3b/0x3d [<ffffffff811ac1d8>] ? __fcheck_files+0x4c/0x58 [<ffffffff811ac946>] ? __fget_light+0x2d/0x52 [<ffffffff817b8adc>] __sys_sendmsg+0x42/0x60 [<ffffffff817b8b0c>] SyS_sendmsg+0x12/0x1c [<ffffffff81a29e32>] system_call_fastpath+0x12/0x17 Fixes: e7ed828f ("netlink: support setting devgroup parameters") Signed-off-by:
-
Michal Kubeček authored
On s390x, gcc 4.8 compiles this part of tcp_v6_early_demux() struct dst_entry *dst = sk->sk_rx_dst; if (dst) dst = dst_check(dst, inet6_sk(sk)->rx_dst_cookie); to code reading sk->sk_rx_dst twice, once for the test and once for the argument of ip6_dst_check() (dst_check() is inline). This allows ip6_dst_check() to be called with null first argument, causing a crash. Protect sk->sk_rx_dst access by READ_ONCE() both in IPv4 and IPv6 TCP early demux code. Fixes: 41063e9d ("ipv4: Early TCP socket demux.") Fixes: c7109986 ("ipv6: Early TCP socket demux") Signed-off-by:Michal Kubecek <mkubecek@suse.cz> Acked-by:
-
Yuval Mintz authored
Statistics' state-machine in bnx2x driver must be synced with various driver flows, but its current locking scheme manages to be wasteful [using 2 locks + additional local variable] and prone to race-conditions at the same time, as the state-machine and 'action' are being accessed under different locks. In addition, current 'safe exec' isn't in fact safe, since the only guarantee it gives is that DMA transactions are over, but ramrods might still be running. This patch cleans up said logic, leaving us with a single lock for the entire flow and removing the possible races. Changes from v2: - Switched into mutex locking from semaphore locking. - Release locks on error flows. Changes from v1: Failure to acquire lock fails flow instead of printing a warning and allowing access to the critical section. Signed-off-by:
Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by:
Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by:
-
David S. Miller authored
Merge tag 'linux-can-fixes-for-4.0-20150322' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2015-03-22 this is a pull-request of 7 patches for net/master. Ahmed S. Darwish fixes another two problems in the kvaser_usb driver. A patch by Colin Ian King for the gs_usb driver adds a missing check for kzalloc allocation failures. Two patches by Stephane Grosjean for the peak_usb driver add missing support for ISO / non-ISO mode switching. Andri Yngvason contributes a patch to fix the state handling in the flexcan driver. The last patch by Andreas Werner for the flexcan driver add missing EPROBE_DEFER handling for the transceiver regulator. ==================== Signed-off-by:
-
- 23 Mar, 2015 4 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Validate iov ranges before feeding them into iov_iter_init(), from Al Viro. 2) We changed copy_from_msghdr_from_user() to zero out the msg_namelen is a NULL pointer is given for the msg_name. Do the same in the compat code too. From Catalin Marinas. 3) Fix partially initialized tuples in netfilter conntrack helper, from Ian Wilson. 4) Missing continue; statement in nft_hash walker can lead to crashes, from Herbert Xu. 5) tproxy_tg6_check looks for IP6T_INV_PROTO in ->flags instead of ->invflags, fix from Pablo Neira Ayuso. 6) Incorrect memory account of TCP FINs can result in negative socket memory accounting values. Fix from Josh Hunt. 7) Don't allow virtual functions to enable VLAN promiscuous mode in be2net driver, from Vasundhara Volam. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: netfilter: nft_compat: set IP6T_F_PROTO flag if protocol is set cx82310_eth: wait for firmware to become ready net: validate the range we feed to iov_iter_init() in sys_sendto/sys_recvfrom net: compat: Update get_compat_msghdr() to match copy_msghdr_from_user() behaviour be2net: use PCI MMIO read instead of config read for errors be2net: restrict MODIFY_EQ_DELAY cmd to a max of 8 EQs be2net: Prevent VFs from enabling VLAN promiscuous mode tcp: fix tcp fin memory accounting ipv6: fix backtracking for throw routes net: ethernet: pcnet32: Setup the SRAM and NOUFLO on Am79C97{3, 5} ipv6: call ipv6_proxy_select_ident instead of ipv6_select_ident in udp6_ufo_fragment netfilter: xt_TPROXY: fix invflags check in tproxy_tg6_check() netfilter: restore rule tracing via nfnetlink_log netfilter: nf_tables: allow to change chain policy without hook if it exists netfilter: Fix potential crash in nft_hash walker netfilter: Zero the tuple in nfnl_cthelper_parse_tuple() -
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds authored
Pull sparc fixes from David Miller: "Some perf bug fixes from David Ahern, and the fix for that nasty memmove() bug" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc64: Fix several bugs in memmove(). sparc: Touch NMI watchdog when walking cpus and calling printk sparc: perf: Add support M7 processor sparc: perf: Make counting mode actually work sparc: perf: Remove redundant perf_pmu_{en|dis}able calls
-
David S. Miller authored
Firstly, handle zero length calls properly. Believe it or not there are a few of these happening during early boot. Next, we can't just drop to a memcpy() call in the forward copy case where dst <= src. The reason is that the cache initializing stores used in the Niagara memcpy() implementations can end up clearing out cache lines before we've sourced their original contents completely. For example, considering NG4memcpy, the main unrolled loop begins like this: load src + 0x00 load src + 0x08 load src + 0x10 load src + 0x18 load src + 0x20 store dst + 0x00 Assume dst is 64 byte aligned and let's say that dst is src - 8 for this memcpy() call. That store at the end there is the one to the first line in the cache line, thus clearing the whole line, which thus clobbers "src + 0x28" before it even gets loaded. To avoid this, just fall through to a simple copy only mildly optimized for the case where src and dst are 8 byte aligned and the length is a multiple of 8 as well. We could get fancy and call GENmemcpy() but this is good enough for how this thing is actually used. Reported-by:David Ahern <david.ahern@oracle.com> Reported-by:
Bob Picco <bpicco@meloft.net> Signed-off-by:
-
Kalle Valo authored
Merge tag 'iwlwifi-for-kalle-2014-03-22' of https://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-fixes * avoid panic with lots of IBSS stations * Fix dvm's behavior after suspend resume * Allow to keep connection after CSA failure * Remove a noisy by harmless WARN_ON * New device IDs
-
- 22 Mar, 2015 8 commits
-
-
Linus Torvalds authored
-
git://neil.brown.name/mdLinus Torvalds authored
Pull bugfix for md from Neil Brown: "One fix for md in 4.0-rc4 Regression in recent patch causes crash on error path" * tag 'md/4.0-rc4-fix' of git://neil.brown.name/md: md: fix problems with freeing private data after ->run failure.
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller authored
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for your net tree, they are: 1) Fix missing initialization of tuple structure in nfnetlink_cthelper to avoid mismatches when looking up to attach userspace helpers to flows, from Ian Wilson. 2) Fix potential crash in nft_hash when we hit -EAGAIN in nft_hash_walk(), from Herbert Xu. 3) We don't need to indicate the hook information to update the basechain default policy in nf_tables. 4) Restore tracing over nfnetlink_log due to recent rework to accomodate logging infrastructure into nf_tables. 5) Fix wrong IP6T_INV_PROTO check in xt_TPROXY. 6) Set IP6T_F_PROTO flag in nft_compat so we can use SYNPROXY6 and REJECT6 from xt over nftables. ==================== Signed-off-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-coreLinus Torvalds authored
Pull driver core fixes from Greg KH: "Here are two bugfixes for things reported. One regression in kernfs, and another issue fixed in the LZ4 code that was fixed in the "upstream" codebase that solves a reported kernel crash Both have been in linux-next for a while" * tag 'driver-core-4.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: LZ4 : fix the data abort issue kernfs: handle poll correctly on 'direct_read' files.
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-miscLinus Torvalds authored
Pull char/misc fixes from Greg KH: "Here are three fixes for 4.0-rc5 that revert 3 PCMCIA patches that were merged in 4.0-rc1 that cause regressions. So let's revert them for now and they will be reworked and resent sometime in the future. All have been tested in linux-next for a while" * tag 'char-misc-4.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: Revert "pcmcia: add a new resource manager for non ISA systems" Revert "pcmcia: fix incorrect bracketing on a test" Revert "pcmcia: add missing include for new pci resource handler"
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/stagingLinus Torvalds authored
Pull staging driver fixes from Greg KH: "Here are four small staging driver fixes, all for the vt6656 and vt6655 drivers, that resolve some reported issues with them. All of these patches have been in linux next for a while" * tag 'staging-4.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: vt6655: Fix late setting of byRFType. vt6655: RFbSetPower fix missing rate RATE_12M staging: vt6656: vnt_rf_setpower: fix missing rate RATE_12M staging: vt6655: vnt_tx_packet fix dma_idx selection.
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds authored
Pull tty/serial driver fix from Greg KH: "Here's a single 8250 serial driver that fixes a reported deadlock with the serial console and the tty driver. It's been in linux-next for a while now" * tag 'tty-4.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: serial: 8250_dw: Fix deadlock in LCR workaround
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull USB / PHY driver fixes from Greg KH: "Here's a number of USB and PHY driver fixes for 4.0-rc5. The largest thing here is a revert of a gadget function driver patch that removes 500 lines of code. Other than that, it's a number of reported bugs fixes and new quirk/id entries. All have been in linux-next for a while" * tag 'usb-4.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (33 commits) usb: common: otg-fsm: only signal connect after switching to peripheral uas: Add US_FL_NO_ATA_1X for Initio Corporation controllers / devices USB: ehci-atmel: rework clk handling MAINTAINERS: add entry for USB OTG FSM usb: chipidea: otg: add a_alt_hnp_support response for B device phy: omap-usb2: Fix missing clk_prepare call when using old dt name phy: ti/omap: Fix modalias phy: core: Fixup return value of phy_exit when !pm_runtime_enabled phy: miphy28lp: Convert to devm_kcalloc and fix wrong sizof phy: miphy365x: Convert to devm_kcalloc and fix wrong sizeof phy: twl4030-usb: Remove redundant assignment for twl->linkstat phy: exynos5-usbdrd: Fix off-by-one valid value checking for args->args[0] phy: Find the right match in devm_phy_destroy() phy: rockchip-usb: Fixup rockchip_usb_phy_power_on failure path phy: ti-pipe3: Simplify ti_pipe3_dpll_wait_lock implementation phy: samsung-usb2: Remove NULL terminating entry from phys array phy: hix5hd2-sata: Check return value of platform_get_resource phy: exynos-dp-video: Kill exynos_dp_video_phy_pwr_isol function Revert "usb: gadget: zero: Add support for interrupt EP" Revert "xhci: Clear the host side toggle manually when endpoint is 'soft reset'" ...
-
