- 12 Jul, 2016 17 commits
-
-
Hans Verkuil authored
The vivid driver didn't set the V4L2_CAP_TIMEPERFRAME flag in s_parm for the non-webcam inputs. This caused a v4l2-compliance fail. Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Tiffany Lin authored
This patch fix sparse warning when running with parameters: C=2 CF="-D__CHECK_ENDIAN__" Signed-off-by:
Tiffany Lin <tiffany.lin@mediatek.com> Signed-off-by:
PoChun Lin <pochun.lin@mediatek.com> Signed-off-by:
-
Fengguang Wu authored
drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_drv.c:433:3-8: No need to set .owner here. The core will do it. Remove .owner field if calls are used which set it automatically Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci Signed-off-by:
Fengguang Wu <fengguang.wu@intel.com> Signed-off-by:
-
Hans Verkuil authored
These are no longer used (finally!), so remove them. Signed-off-by:
-
Hans Verkuil authored
Nobody is using these ops anymore, so remove these callbacks from the subdev drivers that still have them. Signed-off-by:
-
Hans Verkuil authored
These ops are deprecated and should not be used anymore. Signed-off-by:
-
Hans Verkuil authored
These ops are deprecated and should not be used anymore. Signed-off-by:
-
Hans Verkuil authored
These ops are deprecated and should not be used anymore (and in fact they are not used at all). Signed-off-by:
-
Hans Verkuil authored
This op is deprecated and should not be used anymore. Signed-off-by:
-
Hans Verkuil authored
This op is deprecated and should not be used anymore. Signed-off-by:
-
Hans Verkuil authored
This op is deprecated and should not be used anymore. Signed-off-by:
-
Hans Verkuil authored
This op is deprecated and should not be used anymore. Signed-off-by:
-
Hans Verkuil authored
This op is deprecated and should not be used anymore. Signed-off-by:
-
Hans Verkuil authored
This op is deprecated and should not be used anymore. Signed-off-by:
-
Hans Verkuil authored
These callbacks are no longer used since the davinci drivers use the control framework. Signed-off-by:
-
Hans Verkuil authored
No longer used, can be removed. Signed-off-by:
-
Hans Verkuil authored
Replace the old control code with the control framework. This is one of the few remaining drivers that was not using this framework. Signed-off-by:
-
- 09 Jul, 2016 6 commits
-
-
Jonathan McDowell authored
Converts the dtt200u DVB USB driver over to the rc-core infrastructure for its handling of IR remotes. This device can receive generic NEC / NEC Extended signals and the switch to the newer core enables the easy use of tools such as ir-keytable to modify the active key map. Signed-off-by:
Jonathan McDowell <noodles@earth.li> Signed-off-by:
-
Jonathan McDowell authored
Fix RC5 decoding with Fintek CIR chipset Commit e87b540b tightened up the RC5 decoding by adding a check for trailing silence to ensure a valid RC5 command had been received. Unfortunately the trailer length checked was 10 units and the Fintek CIR device does not want to provide details of a space longer than 6350us. This meant that RC5 remotes working on a Fintek setup on 3.16 failed on 3.17 and later. Fix this by shortening the trailer check to 6 units (allowing for a previous space in the received remote command). Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=117221Signed-off-by:
David Härdeman <david@hardeman.nu> Signed-off-by:
-
Soeren Moch authored
Implement memory barriers according to Documentation/circular-buffers.txt: - use smp_store_release() to update ringbuffer read/write pointers - use smp_load_acquire() to load write pointer on reader side - use ACCESS_ONCE() to load read pointer on writer side This fixes data stream corruptions observed e.g. on an ARM Cortex-A9 quad core system with different types (PCI, USB) of DVB tuners. Signed-off-by:
Soeren Moch <smoch@web.de> Cc: stable@vger.kernel.org # 3.14+ Signed-off-by:
-
Hans Verkuil authored
mtk-vcodec/venc_vpu_if.c:40:30: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] struct venc_vpu_inst *vpu = (struct venc_vpu_inst *)msg->venc_inst; ^ Note: venc_inst is u64. Signed-off-by: -
Bhaktipriya Shridhar authored
The workqueue "work_thread" is involved in updating parameters for transfers. It has a single work item(&sd->work) and hence doesn't require ordering. Also, it is not being used on a memory reclaim path. Hence, the singlethreaded workqueue has been replaced with the use of system_wq. System workqueues have been able to handle high level of concurrency for a long time now and hence it's not required to have a singlethreaded workqueue just to gain concurrency. Unlike a dedicated per-cpu workqueue created with create_singlethread_workqueue(), system_wq allows multiple work items to overlap executions even on the same CPU; however, a per-cpu workqueue doesn't have any CPU locality or global ordering guarantee unless the target CPU is explicitly specified and thus the increase of local concurrency shouldn't make any difference. Work item has been flushed in sd_stop0() to ensure that there are no pending tasks while disconnecting the driver. Signed-off-by:
Bhaktipriya Shridhar <bhaktipriya96@gmail.com> Signed-off-by:
-
Hans Verkuil authored
mtk-vcodec/mtk_vcodec_enc.c: In function 'mtk_venc_worker': mtk-vcodec/mtk_vcodec_enc.c:1030:43: warning: format '%lx' expects argument of type 'long unsigned int', but argument 7 has type 'size_t {aka unsigned int}' [-Wformat=] mtk-vcodec/mtk_vcodec_enc.c:1030:43: warning: format '%lx' expects argument of type 'long unsigned int', but argument 10 has type 'size_t {aka unsigned int}' [-Wformat=] Signed-off-by:
-
- 08 Jul, 2016 17 commits
-
-
Mauro Carvalho Chehab authored
The current code will expose a zero value if one of the stats is not available, but this is not what userspace expects. Instead, if something goes wrong on providing some stats, it should be changing the scale to FE_SCALE_NOT_AVAILABLE. So, change the logic to do the right thing. Signed-off-by: -
Abylay Ospan authored
cxd2841er_read_agc_gain_c added to obtain signal strength. signal strength now relay on AGC value. Signed-off-by:
Abylay Ospan <aospan@netup.ru> Signed-off-by:
-
Mauro Carvalho Chehab authored
The signal strength value is reversed: the bigger the number, the weaker is the signal. Fix the logic and present it in dBm. Please notice that the dBm measure is actually an estimation, as the ratio is not fully linear. It also varies with the frequency. Yet, the estimation should be good enough for programs like Kaffeine to indicate when the signal is good or bad. Signed-off-by:
-
Mauro Carvalho Chehab authored
It is a good idea to measure the signal strength while tuning, as this helps to identify if the antenna is ok. Also, such measure helps to identify the quality of the signal. Do some changes to enable it before signal lock. While here, optimize the code to only initialize the stats length once, and make sure that, just after set_frontend, any reading for the stats that depends on lock to return FE_SCALE_NOT_AVAILABLE. Signed-off-by:
-
Hans Verkuil authored
The cec_msg_request_short_audio_descriptor function was missing the reply argument. That's needed if you want the framework to wait for the reply message. Signed-off-by:
-
Hans Verkuil authored
The cec_ops_* functions never touch cec_msg, so mark it as const. This was done for some of the cec_ops_ functions, but not all. Signed-off-by:
-
Hans Verkuil authored
Add msg->len sanity checks to fix static checker warning: include/linux/cec-funcs.h:1154 cec_ops_set_osd_string() warn: setting length 'msg->len - 3' to negative one Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Hans Verkuil authored
- Use IS_REACHABLE(RC_CORE) instead of IS_ENABLED: if cec is built-in and RC_CORE is a module, then CEC can't reach the RC symbols. - Both cec and cec-edid should be bool and use the same build 'mode' as MEDIA_SUPPORT (just as is done for the media controller code). - Add a note to staging that this should be changed once the cec framework is moved out of staging. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Arnd Bergmann authored
The MEDIA_CEC_EDID option is guarded by MEDIA_SUPPORT, so selecting it from MEDIA_CEC produces a warning: warning: (MEDIA_CEC) selects MEDIA_CEC_EDID which has unmet direct dependencies (MEDIA_SUPPORT) The warning is harmless, but it's better to add an explicit dependency to shut it up, to reduce the noise during randconfig builds. Fixes: ca684386 ("[media] cec: add HDMI CEC framework (api)") Signed-off-by:
-
Arnd Bergmann authored
The suspend/resume functions in the s5p-cec driver are only referenced when CONFIG_PM is enabled, so we get a warning about unused functions otherwise: drivers/staging/media/s5p-cec/s5p_cec.c:260:12: error: 's5p_cec_resume' defined but not used [-Werror=unused-function] static int s5p_cec_resume(struct device *dev) ^~~~~~~~~~~~~~ drivers/staging/media/s5p-cec/s5p_cec.c:253:12: error: 's5p_cec_suspend' defined but not used [-Werror=unused-function] static int s5p_cec_suspend(struct device *dev) This marks them as __maybe_unused to avoid the warning without having to introduce an extra #ifdef. Signed-off-by: -
Hans Verkuil authored
CEC_MSG_REPORT_PHYSICAL_ADDR can theoretically be received from an unregistered device, but in that case the code should not attempt to write the received physical address to the phys_addrs array. That would be pointless since there can be multiple unregistered devices that report a physical address. We just ignore those. While at it, improve the dprintk since it would attempt to read from that array as well with the same out-of-bounds problem. Signed-off-by:
-
Hans Verkuil authored
Like the videodev2.h and other headers, explicitly allow these headers to be used with the BSD license. Signed-off-by:
-
Hans Verkuil authored
When a reply to an earlier transmit is received, the tx_status of that transmit needs to be restored. Otherwise the status that the transmit was successful would be lost. Signed-off-by:
-
Kamil Debski authored
Add the keymap module for HDMI CEC remote control commands. Signed-off-by:
Kamil Debski <kamil@wypas.org> Signed-off-by:
-
Mauro Carvalho Chehab authored
* topic/cec: [media] DocBook/media: add CEC documentation [media] s5p_cec: get rid of an unused var [media] move s5p-cec to staging [media] vivid: add CEC emulation [media] cec: s5p-cec: Add s5p-cec driver [media] cec: adv7511: add cec support [media] cec: adv7842: add cec support [media] cec: adv7604: add cec support [media] cec: add compat32 ioctl support [media] cec/TODO: add TODO file so we know why this is still in staging [media] cec: add HDMI CEC framework (api) [media] cec: add HDMI CEC framework (adapter) [media] cec: add HDMI CEC framework (core) [media] cec-funcs.h: static inlines to pack/unpack CEC messages [media] cec.h: add cec header [media] cec-edid: add module for EDID CEC helper functions [media] cec.txt: add CEC framework documentation [media] rc: Add HDMI CEC protocol handling
-
Mauro Carvalho Chehab authored
Linux 4.7-rc6 * tag 'v4.7-rc6': (1245 commits) Linux 4.7-rc6 ovl: warn instead of error if d_type is not supported MIPS: Fix possible corruption of cache mode by mprotect. locks: use file_inode() usb: dwc3: st: Use explicit reset_control_get_exclusive() API phy: phy-stih407-usb: Use explicit reset_control_get_exclusive() API phy: miphy28lp: Inform the reset framework that our reset line may be shared namespace: update event counter when umounting a deleted dentry 9p: use file_dentry() lockd: unregister notifier blocks if the service fails to come up completely ACPI,PCI,IRQ: correct operator precedence fuse: serialize dirops by default drm/i915: Fix missing unlock on error in i915_ppgtt_info() powerpc: Initialise pci_io_base as early as possible mfd: da9053: Fix compiler warning message for uninitialised variable mfd: max77620: Fix FPS switch statements phy: phy-stih407-usb: Inform the reset framework that our reset line may be shared usb: dwc3: st: Inform the reset framework that our reset line may be shared usb: host: ehci-st: Inform the reset framework that our reset line may be shared usb: host: ohci-st: Inform the reset framework that our reset line may be shared ...
-
Heiner Kallweit authored
These two fields are not used and can be removed. Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
-
