Skip to content

L
linux
Switch branch/tag
  1. 23 May, 2019 11 commits
  3. 22 May, 2019 13 commits
    • Tvrtko Ursulin's avatar
      drm/i915: Engine discovery query · c5d3e39c
      Tvrtko Ursulin authored 
      Engine discovery query allows userspace to enumerate engines, probe their
configuration features, all without needing to maintain the internal PCI
ID based database.

A new query for the generic i915 query ioctl is added named
DRM_I915_QUERY_ENGINE_INFO, together with accompanying structure
drm_i915_query_engine_info. The address of latter should be passed to the
kernel in the query.data_ptr field, and should be large enough for the
kernel to fill out all known engines as struct drm_i915_engine_info
elements trailing the query.

As with other queries, setting the item query length to zero allows
userspace to query minimum required buffer size.

Enumerated engines have common type mask which can be used to query all
hardware engines, versus engines userspace can submit to using the execbuf
uAPI.

Engines also have capabilities which are per engine class namespace of
bits describing features not present on all engine instances.

v2:
 * Fixed HEVC assignment.
 * Reorder some fields, rename type to flags, increase width. (Lionel)
 * No need to allocate temporary storage if we do it engine by engine.
   (Lionel)

v3:
 * Describe engine flags and mark mbz fields. (Lionel)
 * HEVC only applies to VCS.

v4:
 * Squash SFC flag into main patch.
 * Tidy some comments.

v5:
 * Add uabi_ prefix to engine capabilities. (Chris Wilson)
 * Report exact size of engine info array. (Chris Wilson)
 * Drop the engine flags. (Joonas Lahtinen)
 * Added some more reserved fields.
 * Move flags after class/instance.

v6:
 * Do not check engine info array was zeroed by userspace but zero the
   unused fields for them instead.

v7:
 * Simplify length calculation loop. (Lionel Landwerlin)

v8:
 * Remove MBZ comments where not applicable.
 * Rename ABI flags to match engine class define naming.
 * Rename SFC ABI flag to reflect it applies to VCS and VECS.
 * SFC is wired to even _logical_ engine instances.
 * SFC applies to VCS and VECS.
 * HEVC is present on all instances on Gen11. (Tony)
 * Simplify length calculation even more. (Chris Wilson)
 * Move info_ptr assigment closer to loop for clarity. (Chris Wilson)
 * Use vdbox_sfc_access from runtime info.
 * Rebase for RUNTIME_INFO.
 * Refactor for lower indentation.
 * Rename uAPI class/instance to engine_class/instance to avoid C++
   keyword.

v9:
 * Rebase for s/num_rings/num_engines/ in RUNTIME_INFO.

v10:
 * Use new copy_query_item.

v11:
 * Consolidate with struct i915_engine_class_instnace.
Signed-off-by: default avatarTvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Dmitry Rogozhkin <dmitry.v.rogozhkin@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tony Ye <tony.ye@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> # v7
Reviewed-by: default avatarChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190522090054.6007-1-tvrtko.ursulin@linux.intel.com
      c5d3e39c
    • Tvrtko Ursulin's avatar
      drm/i915/icl: Add WaDisableBankHangMode · cbe3e1d1
      Tvrtko Ursulin authored 
      Disable GPU hang by default on unrecoverable ECC cache errors.

v2:
 * Rebase.

v3:
 * Use intel_uncore_read. (Chris)

Fixes: cc38cae7 ("drm/i915/icl: Introduce initial Icelake Workarounds")
Signed-off-by: default avatarTvrtko Ursulin <tvrtko.ursulin@intel.com>
Acked-by: default avatarChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190520110442.403-2-tvrtko.ursulin@linux.intel.com
      cbe3e1d1
    • Tvrtko Ursulin's avatar
      drm/i915/selftests: Verify context workarounds · fde93886
      Tvrtko Ursulin authored 
      Test context workarounds have been correctly applied in newly created
contexts.

To accomplish this the existing engine_wa_list_verify helper is extended
to take in a context from which reading of the workaround list will be
done.

Context workaround verification is done from the existing subtests, which
have been renamed to reflect they are no longer only about GT and engine
workarounds.

v2:
 * Test after resets and refactor to use intel_context more. (Chris)

v3:
 * Use ce->engine->i915 instead of ce->gem_context->i915. (Chris)
 * gem_engine_iter.idx is engine->id + 1. (Chris)

v4:
 * Make local function static.
Signed-off-by: default avatarTvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: default avatarChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190520142546.12493-1-tvrtko.ursulin@linux.intel.com
      fde93886
    • Chris Wilson's avatar
      drm/i915: Allow specification of parallel execbuf · a88b6e4c
      Chris Wilson authored 
      There is a desire to split a task onto two engines and have them run at
the same time, e.g. scanline interleaving to spread the workload evenly.
Through the use of the out-fence from the first execbuf, we can
coordinate secondary execbuf to only become ready simultaneously with
the first, so that with all things idle the second execbufs are executed
in parallel with the first. The key difference here between the new
EXEC_FENCE_SUBMIT and the existing EXEC_FENCE_IN is that the in-fence
waits for the completion of the first request (so that all of its
rendering results are visible to the second execbuf, the more common
userspace fence requirement).

Since we only have a single input fence slot, userspace cannot mix an
in-fence and a submit-fence. It has to use one or the other! This is not
such a harsh requirement, since by virtue of the submit-fence, the
secondary execbuf inherit all of the dependencies from the first
request, and for the application the dependencies should be common
between the primary and secondary execbuf.
Suggested-by: default avatarTvrtko Ursulin <tvrtko.ursulin@intel.com>
Testcase: igt/gem_exec_fence/parallel
Link: https://github.com/intel/media-driver/pull/546Signed-off-by: default avatarChris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: default avatarTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190521211134.16117-10-chris@chris-wilson.co.uk
      a88b6e4c
    • Chris Wilson's avatar
      drm/i915/execlists: Virtual engine bonding · ee113690
      Chris Wilson authored 
      Some users require that when a master batch is executed on one particular
engine, a companion batch is run simultaneously on a specific slave
engine. For this purpose, we introduce virtual engine bonding, allowing
maps of master:slaves to be constructed to constrain which physical
engines a virtual engine may select given a fence on a master engine.

For the moment, we continue to ignore the issue of preemption deferring
the master request for later. Ideally, we would like to then also remove
the slave and run something else rather than have it stall the pipeline.
With load balancing, we should be able to move workload around it, but
there is a similar stall on the master pipeline while it may wait for
the slave to be executed. At the cost of more latency for the bonded
request, it may be interesting to launch both on their engines in
lockstep. (Bubbles abound.)

Opens: Also what about bonding an engine as its own master? It doesn't
break anything internally, so allow the silliness.

v2: Emancipate the bonds
v3: Couple in delayed scheduling for the selftests
v4: Handle invalid mutually exclusive bonding
v5: Mention what the uapi does
v6: s/nbond/num_bonds/
Signed-off-by: default avatarChris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: default avatarTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190521211134.16117-9-chris@chris-wilson.co.uk
      ee113690
    • Chris Wilson's avatar
      drm/i915: Extend execution fence to support a callback · f71e01a7
      Chris Wilson authored 
      In the next patch, we will want to configure the slave request
depending on which physical engine the master request is executed on.
For this, we introduce a callback from the execute fence to convey this
information.
Signed-off-by: default avatarChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: default avatarTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190521211134.16117-8-chris@chris-wilson.co.uk
      f71e01a7
    • Chris Wilson's avatar
      drm/i915: Apply an execution_mask to the virtual_engine · 78e41ddd
      Chris Wilson authored 
      Allow the user to direct which physical engines of the virtual engine
they wish to execute one, as sometimes it is necessary to override the
load balancing algorithm.

v2: Only kick the virtual engines on context-out if required
Signed-off-by: default avatarChris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: default avatarTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190521211134.16117-7-chris@chris-wilson.co.uk
      78e41ddd
    • Chris Wilson's avatar
      drm/i915: Load balancing across a virtual engine · 6d06779e
      Chris Wilson authored 
      Having allowed the user to define a set of engines that they will want
to only use, we go one step further and allow them to bind those engines
into a single virtual instance. Submitting a batch to the virtual engine
will then forward it to any one of the set in a manner as best to
distribute load.  The virtual engine has a single timeline across all
engines (it operates as a single queue), so it is not able to concurrently
run batches across multiple engines by itself; that is left up to the user
to submit multiple concurrent batches to multiple queues. Multiple users
will be load balanced across the system.

The mechanism used for load balancing in this patch is a late greedy
balancer. When a request is ready for execution, it is added to each
engine's queue, and when an engine is ready for its next request it
claims it from the virtual engine. The first engine to do so, wins, i.e.
the request is executed at the earliest opportunity (idle moment) in the
system.

As not all HW is created equal, the user is still able to skip the
virtual engine and execute the batch on a specific engine, all within the
same queue. It will then be executed in order on the correct engine,
with execution on other virtual engines being moved away due to the load
detection.

A couple of areas for potential improvement left!

- The virtual engine always take priority over equal-priority tasks.
Mostly broken up by applying FQ_CODEL rules for prioritising new clients,
and hopefully the virtual and real engines are not then congested (i.e.
all work is via virtual engines, or all work is to the real engine).

- We require the breadcrumb irq around every virtual engine request. For
normal engines, we eliminate the need for the slow round trip via
interrupt by using the submit fence and queueing in order. For virtual
engines, we have to allow any job to transfer to a new ring, and cannot
coalesce the submissions, so require the completion fence instead,
forcing the persistent use of interrupts.

- We only drip feed single requests through each virtual engine and onto
the physical engines, even if there was enough work to fill all ELSP,
leaving small stalls with an idle CS event at the end of every request.
Could we be greedy and fill both slots? Being lazy is virtuous for load
distribution on less-than-full workloads though.

Other areas of improvement are more general, such as reducing lock
contention, reducing dispatch overhead, looking at direct submission
rather than bouncing around tasklets etc.

sseu: Lift the restriction to allow sseu to be reconfigured on virtual
engines composed of RENDER_CLASS (rcs).

v2: macroize check_user_mbz()
v3: Cancel virtual engines on wedging
v4: Commence commenting
v5: Replace 64b sibling_mask with a list of class:instance
v6: Drop the one-element array in the uabi
v7: Assert it is an virtual engine in to_virtual_engine()
v8: Skip over holes in [class][inst] so we can selftest with (vcs0, vcs2)

Link: https://github.com/intel/media-driver/pull/283Signed-off-by: default avatarChris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: default avatarTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190521211134.16117-6-chris@chris-wilson.co.uk
      6d06779e
    • Chris Wilson's avatar
      drm/i915: Allow userspace to clone contexts on creation · b81dde71
      Chris Wilson authored 
      A usecase arose out of handling context recovery in mesa, whereby they
wish to recreate a context with fresh logical state but preserving all
other details of the original. Currently, they create a new context and
iterate over which bits they want to copy across, but it would much more
convenient if they were able to just pass in a target context to clone
during creation. This essentially extends the setparam during creation
to pull the details from a target context instead of the user supplied
parameters.

The ideal here is that we don't expose control over anything more than
can be obtained via CONTEXT_PARAM. That is userspace retains explicit
control over all features, and this api is just convenience.

For example, you could replace

	struct context_param p = { .param = CONTEXT_PARAM_VM };

	param.ctx_id = old_id;
	gem_context_get_param(&p.param);

	new_id = gem_context_create();

	param.ctx_id = new_id;
	gem_context_set_param(&p.param);

	gem_vm_destroy(param.value); /* drop the ref to VM_ID handle */

with

	struct create_ext_param p = {
	  { .name = CONTEXT_CREATE_CLONE },
	  .clone_id = old_id,
	  .flags = CLONE_FLAGS_VM
	}
	new_id = gem_context_create_ext(&p);

and not have to worry about stray namespace pollution etc.
Signed-off-by: default avatarChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: default avatarTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190521211134.16117-5-chris@chris-wilson.co.uk
      b81dde71
    • Chris Wilson's avatar
      drm/i915: Re-expose SINGLE_TIMELINE flags for context creation · 8319f44c
      Chris Wilson authored 
      The SINGLE_TIMELINE flag can be used to create a context such that all
engine instances within that context share a common timeline. This can
be useful for mixing operations between real and virtual engines, or
when using a composite context for a single client API context.
Signed-off-by: default avatarChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: default avatarTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190521211134.16117-4-chris@chris-wilson.co.uk
      8319f44c
    • Chris Wilson's avatar
      drm/i915: Extend I915_CONTEXT_PARAM_SSEU to support local ctx->engine[] · e620f7b3
      Chris Wilson authored 
      Allow the user to specify a local engine index (as opposed to
class:index) that they can use to refer to a preset engine inside the
ctx->engine[] array defined by an earlier I915_CONTEXT_PARAM_ENGINES.
This will be useful for setting SSEU parameters on virtual engines that
are local to the context and do not have a valid global class:instance
lookup.

Note that due to the ambiguity in using class:instance with
ctx->engines[], if a user supplied engine map is active the user must
specify the engine to alter by its index into the ctx->engines[].
Signed-off-by: default avatarChris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: default avatarTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190521211134.16117-3-chris@chris-wilson.co.uk
      e620f7b3
    • Chris Wilson's avatar
      drm/i915: Allow a context to define its set of engines · 976b55f0
      Chris Wilson authored 
      Over the last few years, we have debated how to extend the user API to
support an increase in the number of engines, that may be sparse and
even be heterogeneous within a class (not all video decoders created
equal). We settled on using (class, instance) tuples to identify a
specific engine, with an API for the user to construct a map of engines
to capabilities. Into this picture, we then add a challenge of virtual
engines; one user engine that maps behind the scenes to any number of
physical engines. To keep it general, we want the user to have full
control over that mapping. To that end, we allow the user to constrain a
context to define the set of engines that it can access, order fully
controlled by the user via (class, instance). With such precise control
in context setup, we can continue to use the existing execbuf uABI of
specifying a single index; only now it doesn't automagically map onto
the engines, it uses the user defined engine map from the context.

v2: Fixup freeing of local on success of get_engines()
v3: Allow empty engines[]
v4: s/nengine/num_engines/
v5: Replace 64 limit on num_engines with a note that execbuf is
currently limited to only using the first 64 engines.
v6: Actually use the engines_mutex to guard the ctx->engines.

Testcase: igt/gem_ctx_engines
Signed-off-by: default avatarChris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: default avatarTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190521211134.16117-2-chris@chris-wilson.co.uk
      976b55f0
    • Chris Wilson's avatar
      drm/i915: Restore control over ppgtt for context creation ABI · 7f3f317a
      Chris Wilson authored 
      Having hid the partially exposed new ABI from the PR, put it back again
for completion of context recovery. A significant part of context
recovery is the ability to reuse as much of the old context as is
feasible (to avoid expensive reconstruction). The biggest chunk kept
hidden at the moment is fine-control over the ctx->ppgtt (the GPU page
tables and associated translation tables and kernel maps), so make
control over the ctx->ppgtt explicit.

This allows userspace to create and share virtual memory address spaces
(within the limits of a single fd) between contexts they own, along with
the ability to query the contexts for the vm state.
Signed-off-by: default avatarChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: default avatarTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190521211134.16117-1-chris@chris-wilson.co.uk
      7f3f317a
  5. 20 May, 2019 8 commits
  7. 17 May, 2019 7 commits
    • Chris Wilson's avatar
      drm/i915/execlists: Drop promotion on unsubmit · 4cc79cbb
      Chris Wilson authored 
      With the disappearance of NEWCLIENT, we no longer need to provide the
priority boost on preemption in order to prevent repeated gazumping,
and we can remove the dead code.
Signed-off-by: default avatarChris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: default avatarTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190515130052.4475-5-chris@chris-wilson.co.uk
      4cc79cbb
    • Chris Wilson's avatar
      drm/i915: Downgrade NEWCLIENT to non-preemptive · 68fc728b
      Chris Wilson authored 
      Commit 1413b2bc ("drm/i915: Trim NEWCLIENT boosting") had the
intended consequence of not allowing a sequence of work that merely
crossed into a new engine the privilege to be promoted to NEWCLIENT
status. It also had the unintended consequence of actually making
NEWCLIENT effective on heavily oversubscribed transcode machines and
impacting upon their throughput.

If we consider a client packet composed of (rcsA, rcsB, vcs) and 30 of
those clients, using the NEWCLIENT boost that will be scheduled as

	rcsA x 30, (rcsB, vcs) x 30

where as before it would have been

	(rcsA, rcsB, vcs) x 30

That is with NEWCLIENT only boosting the first request of each client,
we would execute all rcsA requests prior to running on the vcs engines;
acruing a lot of dead time as compared to the previous case where the
vcs engine would be started in parallel to processing the second client.

The previous patch has the effect of delaying submission until it is
required by a third party (either the user with an explicit wait, or by
another client/engine). We reduce the NEWCLIENT bump to a mere WAIT,
which has the effect of removing its preemptive grant and reducing it to
the same level as any other user interaction -- that it will not be
promoted above the interengine dependencies, and so preventing NEWCLIENTS
from starving other engines. This a large nerf to the rrul properties of
the current NEWCLIENT, but it still does give prioritised submission to
new requests from light workloads.

References: b16c7651 ("drm/i915: Priority boost for new clients")
Fixes: 1413b2bc ("drm/i915: Trim NEWCLIENT boosting") # customer impact
Signed-off-by: default avatarChris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Dmitry Rogozhkin <dmitry.v.rogozhkin@intel.com>
Cc: Dmitry Ermilov <dmitry.ermilov@intel.com>
Reviewed-by: default avatarTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190515130052.4475-4-chris@chris-wilson.co.uk
      68fc728b
    • Chris Wilson's avatar
      drm/i915: Bump signaler priority on adding a waiter · 6e7eb7a8
      Chris Wilson authored 
      The handling of the no-preemption priority level imposes the restriction
that we need to maintain the implied ordering even though preemption is
disabled. Otherwise we may end up with an AB-BA deadlock across multiple
engine due to a real preemption event reordering the no-preemption
WAITs. To resolve this issue we currently promote all requests to WAIT
on unsubmission, however this interferes with the timeslicing
requirement that we do not apply any implicit promotion that will defeat
the round-robin timeslice list. (If we automatically promote the active
request it will go back to the head of the queue and not the tail!)

So we need implicit promotion to prevent reordering around semaphores
where we are not allowed to preempt, and we must avoid implicit
promotion on unsubmission. So instead of at unsubmit, if we apply that
implicit promotion on adding the dependency, we avoid the semaphore
deadlock and we also reduce the gains made by the promotion for user
space waiting. Furthermore, by keeping the earlier dependencies at a
higher level, we reduce the search space for timeslicing without
altering runtime scheduling too badly (no dependencies at all will be
assigned a higher priority for rrul).

v2: Limit the bump to external edges (as originally intended) i.e.
between contexts and out to the user.

Testcase: igt/gem_concurrent_blit
Signed-off-by: default avatarChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: default avatarTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190515130052.4475-3-chris@chris-wilson.co.uk
      6e7eb7a8
    • Chris Wilson's avatar
      drm/i915/hdcp: Use both bits for device_count · af461ff3
      Chris Wilson authored 
      Smatch spotted:
drivers/gpu/drm/i915//intel_hdcp.c:1406 hdcp2_authenticate_repeater_topology() warn: should this be a bitwise op?

and indeed looks to be suspect that we do need to use a bitwise or to
combine the two register fields into one counter.
Signed-off-by: default avatarChris Wilson <chris@chris-wilson.co.uk>
Cc: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: default avatarRamalingam C <ramalingam.c@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190517102225.3069-3-chris@chris-wilson.co.uk
      af461ff3
    • Chris Wilson's avatar
      drm/i915/dp: Initialise locals for static analysis · 96ac0813
      Chris Wilson authored 
      Just to squelch an smatch warning that doesn't see the with_() being
taken unconditionally:
drivers/gpu/drm/i915//intel_dp.c:230 intel_dp_get_fia_supported_lane_count() error: uninitialized symbol 'lane_info'.
drivers/gpu/drm/i915//intel_dp.c:5338 intel_digital_port_connected() error: uninitialized symbol 'is_connected'.
Signed-off-by: default avatarChris Wilson <chris@chris-wilson.co.uk>
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: default avatarImre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190517102225.3069-2-chris@chris-wilson.co.uk
      96ac0813
    • Chris Wilson's avatar
      drm/i915: Truly bump ready tasks ahead of busywaits · 17db337f
      Chris Wilson authored 
      In commit b7404c7e ("drm/i915: Bump ready tasks ahead of
busywaits"), I tried cutting a corner in order to not install a signal
for each of our dependencies, and only listened to requests on which we
were intending to busywait. The compromise that was made was that
instead of then being able to promote the request with a full
NOSEMAPHORE like its non-busywaiting brethren, as we had not ensured we
had cleared the semaphore chain, we settled for only using the NEWCLIENT
boost. With an over saturated system with multiple NEWCLIENTS in flight
at any time, this was found to be an inadequate promotion and left us
with a much poorer scheduling order than prior to using semaphores.

The outcome of this patch, is that all requests have NOSEMAPHORE
priority when they have no dependencies and are ready to run and not
busywait, restoring the pre-semaphore ordering on saturated systems.

We can demonstrate the effect of poor scheduling order by oversaturating
the system using gem_wsim on a system with multiple vcs engines
(i.e running the same workloads across more clients than required for
peak throughput, e.g. media_load_balance_17i7.wsim -c4 -b context):

x v5.1 (normalized)
+ tip
* fix
+------------------------------------------------------------------------+
|                                                                    x   |
|                                                                    x   |
|                                                                    x   |
|                                                                    x   |
|                                                                   %x   |
|                                                                  %%x   |
|                                                                  %%x   |
|                                                                  %%x   |
|                                                                  %%x   |
|                                                                  %%x   |
|                                                                  %%x   |
|                                                                  %%x   |
|                                                                  %%x   |
|                                                                  %%x   |
|                                                                  %%x   |
|                                                                  %#x   |
|                                                                  %#x   |
|                                                                  %#x   |
|                                                                  %#x   |
|                                                                  %#x   |
|         +                                                        %#xx  |
|         +                                                        %#xx  |
|         +                                                       %%#xx  |
|         +                                                       %%#xx  |
|         +                                                       %%#xx  |
|         +                                                       %%#xx  |
|         +                                                       %%##x  |
|         +++                                                     %%##x  |
|         +++                                                     %%##x  |
|         +++                                                     %%##x  |
|        ++++                                                     %%##x  |
|        ++++                                                     %%##x  |
|        ++++                                                     %%##xx |
|        ++++                                                     %###xx |
|        ++++                                                     %###xx |
|        ++++                                                     %###xx |
|        ++++                                                     %###xx |
|        ++++ +                                                   %#O#xx |
|        ++++ +                                                   %#O#xx |
|        ++++++ +                                                 %#O#xx |
|       ++++++++++                                                %OOOxxx|
|       ++++++++++       +                                       %#OOO#xx|
|     + ++++++++++++ ++ +++++    +                        ++    @@OOOO#xx|
|                                                                   |A_| |
||__________M_______A____________________|                               |
|                                                                 |A_|   |
+------------------------------------------------------------------------+
    N           Min           Max        Median           Avg        Stddev
x 120       0.99456       1.00628      0.999985     1.0001545  0.0024387139
+ 120      0.873021       1.00037      0.884134    0.90148752   0.039190862
Difference at 99.5% confidence
	-0.098667 +/- 0.0110762
	-9.86517% +/- 1.10745%
	(Student's t, pooled s = 0.0277657)
% 120      0.990207       1.00165     0.9970265    0.99699748     0.0021024
Difference at 99.5% confidence
	-0.003157 +/- 0.000908245
	-0.315651% +/- 0.0908105%
	(Student's t, pooled s = 0.00227678)

Fixes: b7404c7e ("drm/i915: Bump ready tasks ahead of busywaits")
Signed-off-by: default avatarChris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Dmitry Rogozhkin <dmitry.v.rogozhkin@intel.com>
Cc: Dmitry Ermilov <dmitry.ermilov@intel.com>
Reviewed-by: default avatarTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190515130052.4475-2-chris@chris-wilson.co.uk
      17db337f
    • Chris Wilson's avatar
      drm/i915: Mark semaphores as complete on unsubmit out if payload was started · dba5a7f3
      Chris Wilson authored 
      Avoid charging us for the presumed busywait if the request was preempted
after successfully using semaphores to reduce inter-engine latency.

v2: Bump the priority to reflect the lack of semaphores now required.

References: ca6e56f6 ("drm/i915: Disable semaphore busywaits on saturated systems")
Signed-off-by: default avatarChris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: default avatarTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190515130052.4475-1-chris@chris-wilson.co.uk
      dba5a7f3
  9. 14 May, 2019 1 commit
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7