- 22 Aug, 2008 1 commit
-
-
Jarek Poplawski authored
Since some qdiscs call qdisc_tree_decrease_qlen() (so qdisc_lookup()) without rtnl_lock(), adding and deleting from a qdisc list needs additional locking. This patch adds global spinlock qdisc_list_lock and wrapper functions for modifying the list. It is considered as a temporary solution until hfsc_dequeue(), netem_dequeue() and tbf_dequeue() (or qdisc_tree_decrease_qlen()) are redone. With feedback from Herbert Xu and David S. Miller. Signed-off-by:
Jarek Poplawski <jarkao2@gmail.com> Acked-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 21 Aug, 2008 3 commits
-
-
Jarek Poplawski authored
dev_deactivate() can skip rescheduling of a qdisc by qdisc_watchdog() or other timer calling netif_schedule() after dev_queue_deactivate(). We prevent this checking aliveness before scheduling the timer. Since during deactivation the root qdisc is available only as qdisc_sleeping additional accessor qdisc_root_sleeping() is created. With feedback from Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Vlad Yasevich authored
All of the SCTP-AUTH socket options could cause a panic if the extension is disabled and the API is envoked. Additionally, there were some additional assumptions that certain pointers would always be valid which may not always be the case. This patch hardens the API and address all of the crash scenarios. Signed-off-by:
Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by:
-
Linus Torvalds authored
-
- 20 Aug, 2008 35 commits
-
-
Al Viro authored
After commit a97c9bf3 (fix cramfs making duplicate entries in inode cache) in kernel 2.6.14, named-pipe on cramfs does not work properly. It seems the commit make all named-pipe on cramfs share their inode (and named-pipe buffer). Make ..._test() refuse to merge inodes with ->i_ino == 1, take inode setup back to get_cramfs_inode() and make ->drop_inode() evict ones with ->i_ino == 1 immediately. Reported-by:
Atsushi Nemoto <anemo@mba.ocn.ne.jp> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: <stable@kernel.org> [2.6.14 and later] Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Ian Campbell authored
Fixes kernel BUG at lib/radix-tree.c:473. Previously the handler was incidentally provided by tmpfs but this was removed with: commit 14fcc23f Author: Hugh Dickins <hugh@veritas.com> Date: Mon Jul 28 15:46:19 2008 -0700 tmpfs: fix kernel BUG in shmem_delete_inode relying on this behaviour was incorrect in any case and the BUG also appeared when the device node was on an ext3 filesystem. v2: override a_ops at open() time rather than mmap() time to minimise races per AKPM's concerns. Signed-off-by:
Ian Campbell <ijc@hellion.org.uk> Cc: Jaya Kumar <jayakumar.lkml@gmail.com> Cc: Nick Piggin <npiggin@suse.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Hugh Dickins <hugh@veritas.com> Cc: Johannes Weiner <hannes@saeurebad.de> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Kel Modderman <kel@otaku42.de> Cc: Markus Armbruster <armbru@redhat.com> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Cc: <stable@kernel.org> [14fcc23f is in 2.6.25.14 and 2.6.26.1] Signed-off-by:
-
Anton Vorontsov authored
On a PowerPC board with ds1374 RTC I'm getting this error while RTC tries to probe: rtc-ds1374 0-0068: unable to request IRQ This happens because I2C probing code (drivers/of/of_i2c.c) is specifying IRQ0 for 'no irq' case, which is correct. The driver handles this incorrectly, though. This patch fixes it. Signed-off-by:
Anton Vorontsov <avorontsov@ru.mvista.com> Cc: David Brownell <david-b@pacbell.net> Cc: Alessandro Zummo <a.zummo@towertech.it> Acked-by:
Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by:
-
Nick Piggin authored
XIP can call into get_xip_mem concurrently with the same file,offset with create=1. This usually maps down to get_block, which expects the page lock to prevent such a situation. This causes ext2 to explode for one reason or another. Serialise those calls for the moment. For common usages today, I suspect get_xip_mem rarely is called to create new blocks. In future as XIP technologies evolve we might need to look at which operations require scalability, and rework the locking to suit. Signed-off-by:
Nick Piggin <npiggin@suse.de> Cc: Jared Hulbert <jaredeh@gmail.com> Acked-by:
Carsten Otte <cotte@freenet.de> Cc: Hugh Dickins <hugh@veritas.com> Signed-off-by:
-
Nick Piggin authored
XIP has a race between sparse pages being inserted into page tables, and sparse pages being zapped when its time to put a non-sparse page in. What can happen is that a process can be left with a dangling sparse page in a MAP_SHARED mapping, while the rest of the world sees the non-sparse version. Ie. data corruption. Guard these operations with a seqlock, making fault-in-sparse-pages the slowpath, and try-to-unmap-sparse-pages the fastpath. Signed-off-by:
-
Nick Piggin authored
There is a race with dirty page accounting where a page may not properly be accounted for. clear_page_dirty_for_io() calls page_mkclean; then TestClearPageDirty. page_mkclean walks the rmaps for that page, and for each one it cleans and write protects the pte if it was dirty. It uses page_check_address to find the pte. That function has a shortcut to avoid the ptl if the pte is not present. Unfortunately, the pte can be switched to not-present then back to present by other code while holding the page table lock -- this should not be a signal for page_mkclean to ignore that pte, because it may be dirty. For example, powerpc64's set_pte_at will clear a previously present pte before setting it to the desired value. There may also be other code in core mm or in arch which do similar things. The consequence of the bug is loss of data integrity due to msync, and loss of dirty page accounting accuracy. XIP's __xip_unmap could easily also be unreliable (depending on the exact XIP locking scheme), which can lead to data corruption. Fix this by having an option to always take ptl to check the pte in page_check_address. It's possible to retain this optimization for page_referenced and try_to_unmap. Signed-off-by:
Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by:
-
Ken Chen authored
When user calls sys_setpriority(PRIO_PGRP ...) on a NPTL style multi-LWP process, only the task leader of the process is affected, all other sibling LWP threads didn't receive the setting. The problem was that the iterator used in sys_setpriority() only iteartes over one task for each process, ignoring all other sibling thread. Introduce a new macro do_each_pid_thread / while_each_pid_thread to walk each thread of a process. Convert 4 call sites in {set/get}priority and ioprio_{set/get}. Signed-off-by:Ken Chen <kenchen@google.com> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: Roland McGrath <roland@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by:
-
Michael Hennerich authored
Video/Framebuffer: add fuctional power management support to Blackfin BF54x LQ043 framebuffer driver Fix bug: does nor properply resume after suspend mem Fix for PM_SUSPEND_MEM: Save and restore peripheral base and DMA registers Signed-off-by:
Michael Hennerich <michael.hennerich@analog.com> Signed-off-by:
Bryan Wu <cooloney@kernel.org> Acked-by:
Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by:
-
Johannes Weiner authored
Absolute alignment requirements may never be applied to node-relative offsets. Andreas Herrmann spotted this flaw when a bootmem allocation on an unaligned node was itself not aligned because the combination of an unaligned node with an aligned offset into that node is not garuanteed to be aligned itself. This patch introduces two helper functions that align a node-relative index or offset with respect to the node's starting address so that the absolute PFN or virtual address that results from combining the two satisfies the requested alignment. Then all the broken ALIGN()s in alloc_bootmem_core() are replaced by these helpers. Signed-off-by:
Johannes Weiner <hannes@saeurebad.de> Reported-by:
Andreas Herrmann <andreas.herrmann3@amd.com> Debugged-by:
-
Andrew Morton authored
If check_legacy_ioport() returns true, we leak *info. Addresses http://bugzilla.kernel.org/show_bug.cgi?id=11362Reported-by:
Daniel Marjamki <danielm77@spray.se> Cc: Christian Krafft <krafft@de.ibm.com> Cc: Michael Ellerman <michael@ellerman.id.au> Cc: Corey Minyard <minyard@acm.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Krzysztof Helt authored
Release cmap memory allocated in the probe function. Signed-off-by:
-
Atsushi Nemoto authored
With commit 5ad31a57 ("rtc: remove BKL for ioctl()"), RTC_UIE_ON ioctl cause double lock on rtc->ops_lock. The ops_lock must not be held while set_uie() calls rtc_read_time() which takes the lock. Also clear_uie() does not need ops_lock. This patch fixes return value of RTC_UIE_OFF ioctl too. Signed-off-by:
-
Pavel Emelyanov authored
In case the binfmt_misc binary handler is registered *before* the e.g. script one (when for example being compiled as a module) the following situation may occur: 1. user launches a script, whose interpreter is a misc binary; 2. the load_misc_binary sets the misc_bang and returns -ENOEVEC, since the binary is a script; 3. the load_script_binary loads one and calls for search_binary_hander to run the interpreter; 4. the load_misc_binary is called again, but refuses to load the binary due to misc_bang bit set. The fix is to move the misc_bang setting lower - prior to the actual call to the search_binary_handler. Caused by the commit 3a2e7f47 (binfmt_misc.c: avoid potential kernel stack overflow) Signed-off-by:
Pavel Emelyanov <xemul@openvz.org> Reported-by:
Kirill A. Shutemov <kirill@shutemov.name> Tested-by:
-
Akinobu Mita authored
The name of brd block device is "ramdisk", it's not "brd". (The block device is registered by register_blkdev(RAMDISK_MAJOR, "ramdisk") So it should be unregistered by unregister_blkdev(RAMDISK_MAJOR, "ramdisk") Signed-off-by:
Akinobu Mita <akinobu.mita@gmail.com> Acked-by:
-
Sven Wegener authored
We leak the memory allocated for the nbd_dev array at multiple places. Fix them by either adding a kfree() or by rearranging code to return before we allocate the memory. Signed-off-by:
Sven Wegener <sven.wegener@stealer.net> Cc: Paul Clements <paul.clements@steeleye.com> Signed-off-by:
-
Marcin Slusarz authored
mminit_loglevel is now used from mminit_verify_zonelist <- build_all_zonelists <- 1. online_pages <- memory_block_action <- memory_block_change_state <- store_mem_state (sys handler) 2. numa_zonelist_order_handler (proc handler) so it cannot be annotated __meminit - drop it fixes following section mismatch warning: WARNING: vmlinux.o(.text+0x71628): Section mismatch in reference from the function mminit_verify_zonelist() to the variable .meminit.data:mminit_loglevel The function mminit_verify_zonelist() references the variable __meminitdata mminit_loglevel. This is often because mminit_verify_zonelist lacks a __meminitdata annotation or the annotation of mminit_loglevel is wrong. Signed-off-by:
Marcin Slusarz <marcin.slusarz@gmail.com> Acked-by:
Mel Gorman <mel@csn.ul.ie> Signed-off-by:
-
Hugh Dickins authored
Adjust <Alt><SysRq>m show_swap_cache_info() to show "Free swap" as a signed long: the signed format is preferable, because during swapoff nr_swap_pages can legitimately go negative, so makes more sense thus (it used to be shown redundantly, once as signed and once as unsigned). Signed-off-by:
Hugh Dickins <hugh@veritas.com> Reviewed-by:
KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by:
-
Hugh Dickins authored
Add a comment to s390's page_test_dirty/page_clear_dirty/page_set_dirty dance in page_remove_rmap(): I was wrong to think the PageSwapCache test could be avoided, and would like a comment in there to remind me. And mention s390, to help us remember that this block is not really common. Also move down the "It would be tidy to reset PageAnon" comment: it does not belong to s390's block, and it would be unwise to reset PageAnon before we're done with testing it. Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Mike Frysinger authored
Signed-off-by:
Mike Frysinger <vapier.adi@gmail.com> Signed-off-by:
-
Graf Yang authored
Signed-off-by:
Graf Yang <graf.yang@analog.com> Signed-off-by:
-
Mike Frysinger authored
Signed-off-by:
-
Mike Frysinger authored
Blackfin RTC Driver: move irq request/free out of open/release and into probe/remove so that the non-dev interfaces (like sysfs) work as expected Signed-off-by:
-
Clement Calmels authored
This addresses http://bugzilla.kernel.org/show_bug.cgi?id=11318 In function show_map (file: fs/proc/task_mmu.c), if vma->vm_pgoff > 2^20 than (vma->vm_pgoff << PAGE_SIZE) is greater than 2^32 (with PAGE_SIZE equal to 4096 (i.e. 2^12). The next seq_printf use an unsigned long for the conversion of (vma->vm_pgoff << PAGE_SIZE), as a result the offset value displayed in /proc/self/maps is truncated if the page offset is greater than 2^20. A test that shows this issue: #define _GNU_SOURCE #include <sys/types.h> #include <sys/stat.h> #include <sys/mman.h> #include <stdlib.h> #include <stdio.h> #include <fcntl.h> #include <unistd.h> #include <string.h> #define PAGE_SIZE (getpagesize()) #if __i386__ # define U64_STR "%llx" #elif __x86_64 # define U64_STR "%lx" #else # error "Architecture Unsupported" #endif int main(int argc, char *argv[]) { int fd; char *addr; off64_t offset = 0x10000000; char *filename = "/dev/zero"; fd = open(filename, O_RDONLY); if (fd < 0) { perror("open"); return 1; } offset *= 0x10; printf("offset = " U64_STR "\n", offset); addr = (char*)mmap64(NULL, PAGE_SIZE, PROT_READ, MAP_PRIVATE, fd, offset); if ((void*)addr == MAP_FAILED) { perror("mmap64"); return 1; } { FILE *fmaps; char *line = NULL; size_t len = 0; ssize_t read; size_t filename_len = strlen(filename); fmaps = fopen("/proc/self/maps", "r"); if (!fmaps) { perror("fopen"); return 1; } while ((read = getline(&line, &len, fmaps)) != -1) { if ((read > filename_len + 1) && (strncmp(&line[read - filename_len - 1], filename, filename_len) == 0)) printf("%s", line); } if (line) free(line); fclose(fmaps); } close(fd); return 0; } [akpm@linux-foundation.org: coding-style fixes] Signed-off-by:
Clement Calmels <cboulte@gmail.com> Signed-off-by:
-
Andreas Herrmann authored
"bootmem_debug" is not mentioned in kernel-parameters.txt. Recently I had to use that kernel option and I think it should be documented. Signed-off-by:
-
Matthew Garrett authored
eeepc-laptop uses the hwmon struct after unregistering the device, causing an oops on module unload. Flip the ordering to fix. Signed-off-by:
Matthew Garrett <mjg@redhat.com> Cc: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Cc: Corentin Chary <corentincj@iksaif.net> Cc: Karol Kozimor <sziwan@users.sourceforge.net> Cc: <stable@kernel.org> [2.6.26.x] Signed-off-by:
-
David Howells authored
Provide ioremap_wc() for FRV. Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
-
David Howells authored
Supply ioremap_wc() for MN10300. Signed-off-by:
-
David Woodhouse authored
Purely cosmetic for now, but we might as well get it merged ASAP. Signed-off-by:
David Woodhouse <David.Woodhouse@intel.com> Signed-off-by:
-
David Woodhouse authored
I won't say 'fix', because they still look broken, although this will at least allow 'make ARCH=CRIS headers_install' to _complete_. For headers which are exported, we should probably choose between asm/arch-v10 and asm/arch-v32 by something that GCC defines -- we can't rely on a generated symlink. And we certainly can't export an arch/ directory which doesn't even exist. And the only thing that we seem to include from the arch/ directory is <asm/arch/ptrace.h> from <asm/ptrace.h> ... and that isn't exported in either arch-v10 or arch-v32 _anyway_. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6Linus Torvalds authored
* 'sh/for-2.6.27' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: sh: Provide a FLAT_PLAT_INIT() definition. binfmt_flat: Stub in a FLAT_PLAT_INIT(). video: export sh_mobile_lcdc panel size sh: select memchunk size using kernel cmdline sh: export sh7723 VEU as VEU2H input: migor_ts compile and detection fix sh: remove MSTPCR defines from Migo-R header file sh: Update sh7763rdp defconfig sh: Add support sh7760fb to sh7763rdp board sh: Add support sh_eth to sh7763rdp board sh: Disable 64kB hugetlbpage size when using 64kB PAGE_SIZE. sh: Don't export __{s,u}divsi3_i4i from SH-2 libgcc. fix SH7705_CACHE_32KB compilation sh: mach-x3proto: Fix up smc91x platform data.
-
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpcLinus Torvalds authored
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: powerpc: Fix vio_bus_probe oops on probe error powerpc/ibmebus: Restore "name" sysfs attribute on ibmebus devices powerpc: Fix /dev/oldmem interface for kdump powerpc/spufs: Remove invalid semicolon after if statement powerpc/spufs: reference context while dropping state mutex in scheduler powerpc/spufs: fix npc setting for NOSCHED contexts
-
git://git.kernel.org/pub/scm/linux/kernel/git/frob/linux-2.6-utraceLinus Torvalds authored
* 'tracehook' of git://git.kernel.org/pub/scm/linux/kernel/git/frob/linux-2.6-utrace: tracehook: fix SA_NOCLDWAIT
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: (22 commits) [SCSI] ibmvfc: Driver version 1.0.2 [SCSI] ibmvfc: Add details to async event log [SCSI] ibmvfc: Sanitize response lengths [SCSI] ibmvfc: Fix for lost async events [SCSI] ibmvfc: Fixup host state during reinit [SCSI] ibmvfc: Fix another hang on module removal [SCSI] ibmvscsi: Fixup desired DMA value for shared memory partitions [SCSI] megaraid_sas: remove sysfs dbg_lvl world writeable permissions [SCSI] qla2xxx: Update version number to 8.02.01-k7. [SCSI] qla2xxx: Explicitly tear-down vports during PCI remove_one(). [SCSI] qla2xxx: Reference proper ha during SBR handling. [SCSI] qla2xxx: Set npiv_supported flag for FCoE HBAs. [SCSI] qla2xxx: Don't leak SG-DMA mappings while aborting commands. [SCSI] qla2xxx: Correct vport-state management issues during ISP-ABORT. [SCSI] qla2xxx: Correct synchronization of software/firmware fcport states. [SCSI] scsi_dh: Initialize lun_state in check_ownership() [SCSI] scsi_dh: Do not use scsilun in rdac hardware handler [SCSI] megaraid_sas: version and Documentation Update [SCSI] megaraid_sas: add new controllers (0x78 0x79) [SCSI] megaraid_sas: add the shutdown DCMD cmd to driver shutdown routine ...
-
Linus Torvalds authored
There was another FAT BKL conversion deadlock reported by Bart Trojanowski due to the BKL being used as a recursive lock by FAT, which was missed because it only triggers with 'sync' (or 'dirsync') mounts. The recursion worked for the BKL, but after the conversion to lock_super (which uses a mutex), it just deadlocks. Thanks to Bart for debugging this and testing the fix. The lock debugging information from the original report: ============================================= [ INFO: possible recursive locking detected ] 2.6.27-rc3-bisect-00448-ga7f5aaf3 #16 --------------------------------------------- mv/4020 is trying to acquire lock: (&type->s_lock_key#9){--..}, at: [<c01a90fe>] lock_super+0x1e/0x20 but task is already holding lock: (&type->s_lock_key#9){--..}, at: [<c01a90fe>] lock_super+0x1e/0x20 other info that might help us debug this: 3 locks held by mv/4020: #0: (&sb->s_type->i_mutex_key#9/1){--..}, at: [<c01b2336>] do_unlinkat+0x66/0x140 #1: (&sb->s_type->i_mutex_key#9){--..}, at: [<c01b0954>] vfs_unlink+0x84/0x110 #2: (&type->s_lock_key#9){--..}, at: [<c01a90fe>] lock_super+0x1e/0x20 stack backtrace: Pid: 4020, comm: mv Not tainted 2.6.27-rc3-bisect-00448-ga7f5aaf3 #16 [<c014e694>] validate_chain+0x984/0xea0 [<c0108d70>] ? native_sched_clock+0x0/0xf0 [<c014ee9c>] __lock_acquire+0x2ec/0x9b0 [<c014f5cf>] lock_acquire+0x6f/0x90 [<c01a90fe>] ? lock_super+0x1e/0x20 [<c044e5fd>] mutex_lock_nested+0xad/0x300 [<c01a90fe>] ? lock_super+0x1e/0x20 [<c01a90fe>] ? lock_super+0x1e/0x20 [<c01a90fe>] lock_super+0x1e/0x20 [<f8b3a700>] fat_write_inode+0x60/0x2b0 [fat] [<c0450878>] ? _spin_unlock_irqrestore+0x48/0x80 [<f8b3a953>] ? fat_sync_inode+0x3/0x20 [fat] [<f8b3a962>] fat_sync_inode+0x12/0x20 [fat] [<f8b37c7e>] fat_remove_entries+0xbe/0x120 [fat] [<f8b422ef>] vfat_unlink+0x5f/0x90 [vfat] [<f8b42290>] ? vfat_unlink+0x0/0x90 [vfat] [<c01b0968>] vfs_unlink+0x98/0x110 [<c01b2400>] do_unlinkat+0x130/0x140 [<c016a8f5>] ? audit_syscall_entry+0x105/0x150 [<c01b253b>] sys_unlinkat+0x3b/0x40 [<c01040d3>] sysenter_do_call+0x12/0x3f ======================= where the deadlock is due to the nesting of lock_super from vfat_unlink to fat_write_inode: - do_unlinkat - vfs_unlink - vfat_unlink * lock_super - fat_remove_entries - fat_sync_inode - fat_write_inode * lock_super and the fix is to simply remove the use of lock_super() in fat_write_inode. The lock_super() there had been just an automatic conversion of the kernel lock to the superblock lock, but no locking was actually needed there, since the code in fat_write_inode already protected all relevant accesses with a spinlock (sbi->inode_hash_lock to be exact). The only code inside the BKL (and thus the superblock lock) was accesses tp local variables or calls to functions that have long been SMP-safe (i.e. sb_bread, mark_buffe_dirty and brlese). Bart reports: "Looks good. I ran 10 parallel processes creating 1M files truncating them, writing to them again and then deleting them. This patch fixes the issue I ran into. Signed-off-by: Bart Trojanowski <bart@jukie.net>" Reported-and-tested-by:
Bart Trojanowski <bart@jukie.net> Signed-off-by:
-
Roland McGrath authored
I outwitted myself again in commit 2b2a1ff6, and broke the SA_NOCLDWAIT behavior so it leaks zombies. This fixes it. Reported-by:
Andi Kleen <andi@firstfloor.org> Signed-off-by:
Roland McGrath <roland@redhat.com>
-
- 19 Aug, 2008 1 commit
-
-
Brian King authored
When CMO is enabled and booted on a non CMO system and the VIO device's probe function fails, an oops can result since vio_cmo_bus_remove is called when it should not. This fixes it by avoiding the vio_cmo_bus_remove call on platforms that don't implement CMO. cpu 0x0: Vector: 300 (Data Access) at [c00000000e13b3d0] pc: c000000000020d34: .vio_cmo_bus_remove+0xc0/0x1f4 lr: c000000000020ca4: .vio_cmo_bus_remove+0x30/0x1f4 sp: c00000000e13b650 msr: 8000000000009032 dar: 0 dsisr: 40000000 current = 0xc00000000e0566c0 paca = 0xc0000000006f9b80 pid = 2428, comm = modprobe enter ? for help [c00000000e13b6e0] c000000000021d94 .vio_bus_probe+0x2f8/0x33c [c00000000e13b7a0] c00000000029fc88 .driver_probe_device+0x13c/0x200 [c00000000e13b830] c00000000029fdac .__driver_attach+0x60/0xa4 [c00000000e13b8c0] c00000000029f050 .bus_for_each_dev+0x80/0xd8 [c00000000e13b980] c00000000029f9ec .driver_attach+0x28/0x40 [c00000000e13ba00] c00000000029f630 .bus_add_driver+0xd4/0x284 [c00000000e13baa0] c0000000002a01bc .driver_register+0xc4/0x198 [c00000000e13bb50] c00000000002168c .vio_register_driver+0x40/0x5c [c00000000e13bbe0] d0000000003b3f1c .ibmvfc_module_init+0x70/0x109c [ibmvfc] [c00000000e13bc70] c0000000000acf08 .sys_init_module+0x184c/0x1a10 [c00000000e13be30] c000000000008748 syscall_exit+0x0/0x40 Signed-off-by:Brian King <brking@linux.vnet.ibm.com> Signed-off-by:
Paul Mackerras <paulus@samba.org>
-
