port_num was not being returned for unconnected QPs.
Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

When default static rate is returned for Tavor, need to translate it
to an ib rate value.
Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

This stops the generic poll code from waiting for a timeout.
Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

This is useful for testing purposes.
Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

Also added the word "Hardware" after "Fatal" to make it more obvious
that it's hardware, not software.
Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

This patch only renames files, fixes product names, and updates
comments.
Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

When we first submitted a userspace subnet management agent, it was
rejected, so we left it out of the final driver submission.  This patch
removes a number of vestigial references to it.
Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

A lot of ipath layer code was only called in one place. Now that the
ipath_core and ib_ipath drivers are merged, it's more sensible to simply
inline the simple stuff that the layer code was doing.
Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

There is little point in keeping the two drivers separate, so we are
merging them.
Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

Some userlands try to mmap these pages read-write, so accommodate them.
Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

Change comment: no longer imply that user can set ipath_kpiobufs to zero.
Actually set ipath_kpiobufs from parameter. Previously only altered
per-device ipath_lastport_piobuf, which was over-written in chip init.
Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

Allocate enough pointers for all possible ports, to avoid problems in
cleanup/unload.
Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

Ordering of writethrough store buffers needs to be forced, and we need
to use ifdef to get writethrough behavior to InfiniPath buffers, because
there is no generic way to specify that at this time (similar to code
in char/drm/drm_vm.c and block/z2ram.c).
Signed-off-by: John Gregor <john.gregor@qlogic.com>
Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

Improve performance of userspace post receive, post SRQ receive, and
poll CQ operations for ipath by allowing userspace to directly mmap()
receive queues and completion queues.  This eliminates the copying
between userspace and the kernel in the data path.
Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

Pass a struct ib_udata to the low-level driver's ->modify_srq() and
->modify_qp() methods, so that it can get to the device-specific data
passed in by the userspace driver.
Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

Add a ib_uverbs_resize_cq_resp.driver_data field so that low-level
drivers can return data from a resize CQ operation to userspace.  Have
ib_uverbs_resize_cq() only copy the cqe field, to avoid having to bump
the userspace ABI.
Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

Add a driver for IBM GX bus InfiniBand adapters, which are usable with
some pSeries/System p systems.

Signed-off-by: Heiko J Schick <schickhj.ibm.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

Add local_ib_device and local_ib_port attributes to srp scsi_host.
These are needed when we want to connect to the same target through
multiple distinct ports.
Signed-off-by: Ishai Rabinovitz <ishai@mellanox.co.il>
Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

Signed-off-by: James Lentini <jlentini@netapp.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

Lockdep warns when userspace creates a QP that uses different CQs for
send completions and receive completions, because both CQs are locked
and their mutexes belong to the same lock class.  However, we know
that the mutexes are distinct and the nesting is safe (there is no
possibility of AB-BA deadlock because the mutexes are locked with
down_read()), so annotate the situation with SINGLE_DEPTH_NESTING to
get rid of the lockdep warning.
Signed-off-by: Roland Dreier <rolandd@cisco.com>

There were two functions that open-coded idr_read_cq() in terms of
idr_read_uobj() rather than using the helper.
Signed-off-by: Roland Dreier <rolandd@cisco.com>

Prevent flush task from freeing the ipoib_neigh pointer, while
ipoib_start_xmit() is accessing the ipoib_neigh through the pointer it
has loaded from the skb's hardware address.
Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

Make kernel use UAR2 instead of UAR1 for hardware access: this adds
sanity checking from the hardware side, without any performance cost.
Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

The SM LID used to send traps to is incorrectly set to port LID.  This
is a regression from 2.6.17 -- after a PortInfo MAD is received, no
traps are sent to the SM LID.  The traps go to the loopback interface
instead, and are dropped there.  The SM LID should be taken from the
sm_lid of the PortInfo response.

The bug was introduced by commit 12bbb2b7:
	IB/mthca: Add client reregister event generation
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

* git://git.infradead.org/~dwmw2/hdroneline:
  [HEADERS] One line per header in Kbuild files to reduce conflicts

Manual (trivial) conflict resolution in include/asm-s390/Kbuild

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2:
  ocfs2: Remove overzealous BUG_ON()
  ocfs2: Don't print on unknown remote blocking call
  ocfs2: Remove EXPERIMENTAL dependency
  ocfs2: implement directory read-ahead
  ocfs2: properly update i_mtime on buffered write
  ocfs2: Fix directory link count checks in ocfs2_link()
  ocfs2: move nlink check in ocfs2_mknod()
  ocfs2: Fix heartbeat sector calculation
  [PATCH] fs/ocfs2/ioctl.c should #include "ioctl.h"
  ocfs2: add ext2 attributes
  configfs: Prevent duplicate subsystem names.

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (64 commits)
  [BLOCK] dm-crypt: trivial comment improvements
  [CRYPTO] api: Deprecate crypto_digest_* and crypto_alg_available
  [CRYPTO] padlock: Convert padlock-sha to use crypto_hash
  [CRYPTO] users: Use crypto_comp and crypto_has_*
  [CRYPTO] api: Add crypto_comp and crypto_has_*
  [CRYPTO] users: Use crypto_hash interface instead of crypto_digest
  [SCSI] iscsi: Use crypto_hash interface instead of crypto_digest
  [CRYPTO] digest: Remove old HMAC implementation
  [CRYPTO] doc: Update documentation for hash and me
  [SCTP]: Use HMAC template and hash interface
  [IPSEC]: Use HMAC template and hash interface
  [CRYPTO] tcrypt: Use HMAC template and hash interface
  [CRYPTO] hmac: Add crypto template implementation
  [CRYPTO] digest: Added user API for new hash type
  [CRYPTO] api: Mark parts of cipher interface as deprecated
  [PATCH] scatterlist: Add const to sg_set_buf/sg_init_one pointer argument
  [CRYPTO] drivers: Remove obsolete block cipher operations
  [CRYPTO] users: Use block ciphers where applicable
  [SUNRPC] GSS: Use block ciphers where applicable
  [IPSEC] ESP: Use block ciphers where applicable
  ...

* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6: (44 commits)
  [S390] hypfs crashes with invalid mount option.
  [S390] cio: subchannel evaluation function operates without lock
  [S390] cio: always query all paths on path verification.
  [S390] cio: update path groups on logical CHPID changes.
  [S390] cio: subchannels in no-path state.
  [S390] Replace nopav-message on VM.
  [S390] set modalias for ccw bus uevents.
  [S390] Get rid of DBG macro.
  [S390] Use alternative user-copy operations for new hardware.
  [S390] Make user-copy operations run-time configurable.
  [S390] Cleanup in signal handling code.
  [S390] Cleanup in page table related code.
  [S390] Linux API for writing z/VM APPLDATA Monitor records.
  [S390] xpram off by one error.
  [S390] Remove kexec experimental flag.
  [S390] cleanup appldata.
  [S390] fix typo in vmcp.
  [S390] Kernel stack overflow handling.
  [S390] qdio slsb processing state.
  [S390] Missing initialization in common i/o layer.
  ...

* git://git.infradead.org/mtd-2.6:
  Remove accidentally-added include/linux/utsrelease.h
  Revert "[MTD] blkdev helper code: fix printk format warning"
  [MTD] Add SSFDC (SmartMedia) read-only translation layer
  [MTD] pmc551 pci cleanup
  [MTD] pmc551 use kzalloc
  [MTD] pmc551 whitespace cleanup
  [MTD] Remove iq80310 map driver
  [MTD NAND] Fix in typo ndfc.c causing wrong ECC layout
  [MTD] physmap: add power management support
  ioremap balanced with iounmap for drivers/mtd subsystem
  [MTD] Switch to pci_get_device and do ref counting
  [MTD] blkdev helper code: fix printk format warning
  [MTD] Fix ixp4xx partition parsing.
  [JFFS2] Remove unneeded ifdefs from jffs2_fs_i.h
  [MTD NAND] Remove old code in au1550nd.c
  [MTD] Unlock NOR flash automatically where necessary