Signed-off-by: Valentin Sitdikov <valentin.sitdikov@siemens.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Convert the ecovec24 board code to pass the mac
address to the sh_eth driver using platform data.
Also, remove the static clock to allow Runtime PM.
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Add HWBLK_ETHER to the sh_eth platform device
to allow Runtime PM of the ethernet hardware.
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Add an uImage.bin target to allow uncompressed uImages.
Useful for boards with busted u-boot decompression like
the rsk7203 on my desk.
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Fix the rsk7203 board code to build with CONFIG_MTD=n.
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

This unbreaks kexec support. Without this fix all
cases of kexec fails since __pa() does not behave
like PHYSADDR(). The downside is that we also kill
the code blocking users running old kexec-tools.
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Conflicts:
	arch/sh/kernel/dwarf.c

Conflicts:
	arch/sh/boards/mach-ecovec24/setup.c
	arch/sh/boards/mach-kfr2r09/setup.c

Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Add SD Card support to the kfr2r09 board using the
sh_mobile_sdhi driver hooked up to SDHI0 and yc304.
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Add SD Card support to the se7724 board using the
sh_mobile_sdhi driver hooked up to SDHI0 and CN7.
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Convert the AP325 board to use sh_mobile_sdhi for the
SD Card connected to CN3 instead of mmc_spi.
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Convert the Migo-R board to use sh_mobile_sdhi for the
SD Card connected to CN9 instead of mmc_spi.
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Add SUPERH to the Kconfig dependencies for tmio_mmc.

This change allows us to drive the SDHI hardware blocks
found in SuperH Mobile with tmio_mmc.
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

This patch adds an MFD driver for the SuperH Mobile SDHI
hardware block. At this point the driver simply wraps the
tmio-mmc driver with some clock code. In the future this
driver is the place to put SDHI specific hotplug code.
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

When CONFIG_FUNCTION_GRAPH_TRACER is enabled the function graph tracer
may patch return addresses on the stack with the address of
return_to_handler(). This really confuses the DWARF unwinder because it
will try find the caller of return_to_handler(), not the caller of the
real return address.

So teach the DWARF unwinder how to find the real return address whenever
it encounters return_to_handler().

This patch does not cope very well when multiple return addresses on the
stack have been patched. To make it work properly it would require state
to track how many return_to_handler()'s have been seen so that we'd know
where to look in current->curr_ret_stack[]. So for now, instead of
trying to handle this, just moan if more than one return address on the
stack has been patched.
Signed-off-by: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

ERROR: "__movmemSI12" [net/unix/unix.ko] undefined!
ERROR: "__movmemSI52" [net/ipv6/sit.ko] undefined!
ERROR: "__movmemSI24" [net/ipv6/ipv6.ko] undefined!
ERROR: "__movmemSI60" [net/ipv6/ipv6.ko] undefined!
ERROR: "__movmemSI16" [net/ipv6/ipv6.ko] undefined!
ERROR: "__movmemSI20" [net/ipv6/ipv6.ko] undefined!
ERROR: "__movmemSI32" [net/ipv6/ipv6.ko] undefined!
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

This adds an __irq_entry annotation for do_IRQ() so that the IRQ
annotation in the function graph tracer works as advertized. We already
have the IRQENTRY section wired up, so this is just a trivial addition
to actually make use of it.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

This moves the current dma_alloc/free_coherent() calls to a generic
variant and plugs them in for the nommu default. Other variants can
override the defaults in the dma mapping ops directly.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus:
  move virtrng_remove to .devexit.text
  move virtballoon_remove to .devexit.text
  virtio_blk: Revert serial number support
  virtio: let header files include virtio_ids.h
  virtio_blk: revert QUEUE_FLAG_VIRT addition

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (21 commits)
  niu: VLAN_ETH_HLEN should be used to make sure that the whole MAC header was copied to the head buffer in the Vlan packets case
  KS8851: Fix ks8851_set_rx_mode() for IFF_MULTICAST
  KS8851: Fix MAC address write order
  KS8851: Add soft reset at probe time
  net: fix section mismatch in fec.c
  net: Fix struct inet_timewait_sock bitfield annotation
  tcp: Try to catch MSG_PEEK bug
  net: Fix IP_MULTICAST_IF
  bluetooth: static lock key fix
  bluetooth: scheduling while atomic bug fix
  tcp: fix TCP_DEFER_ACCEPT retrans calculation
  tcp: reduce SYN-ACK retrans for TCP_DEFER_ACCEPT
  tcp: accept socket after TCP_DEFER_ACCEPT period
  Revert "tcp: fix tcp_defer_accept to consider the timeout"
  AF_UNIX: Fix deadlock on connecting to shutdown socket
  ethoc: clear only pending irqs
  ethoc: inline regs access
  vmxnet3: use dev_dbg, fix build for CONFIG_BLOCK=n
  virtio_net: use dev_kfree_skb_any() in free_old_xmit_skbs()
  be2net: fix support for PCI hot plug
  ...

The function virtrng_remove is used only wrapped by __devexit_p so define
it using __devexit.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

The function virtballoon_remove is used only wrapped by __devexit_p so
define it using __devexit.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

This reverts "Add serial number support for virtio_blk, V4a".

Turns out that virtio_pci, lguest and s/390 all have an 8 bit limit
on virtio config space, so noone could ever use this.

This is coming back later in a cleaner form.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: john cooper <john.cooper@redhat.com>
Cc: Jens Axboe <jens.axboe@oracle.com>

Rusty,

commit 3ca4f5ca
    virtio: add virtio IDs file
moved all device IDs into a single file. While the change itself is
a very good one, it can break userspace applications. For example
if a userspace tool wanted to get the ID of virtio_net it used to
include virtio_net.h. This does no longer work, since virtio_net.h
does not include virtio_ids.h.
This patch moves all "#include <linux/virtio_ids.h>" from the C
files into the header files, making the header files compatible with
the old ones.

In addition, this patch exports virtio_ids.h to userspace.

CC: Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

It seems like the addition of QUEUE_FLAG_VIRT caueses major performance
regressions for Fedora users:

	https://bugzilla.redhat.com/show_bug.cgi?id=509383
	https://bugzilla.redhat.com/show_bug.cgi?id=505695

while I can't reproduce those extreme regressions myself I think the flag
is wrong.

Rationale:

  QUEUE_FLAG_VIRT expands to QUEUE_FLAG_NONROT which casus the queue
  unplugged immediately.  This is not a good behaviour for at least
  qemu and kvm where we do have significant overhead for every
  I/O operations.  Even with all the latested speeups (native AIO,
  MSI support, zero copy) we can only get native speed for up to 128kb
  I/O requests we already are down to 66% of native performance for 4kb
  requests even on my laptop running the Intel X25-M SSD for which the
  QUEUE_FLAG_NONROT was designed.
  If we ever get virtio-blk overhead low enough that this flag makes
  sense it should only be set based on a feature flag set by the host.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

niu: VLAN_ETH_HLEN should be used to make sure that the whole MAC header was copied to the head buffer in the Vlan packets case
Signed-off-by: Joyce Yu <joyce.yu@sun.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

* 'for-linus' of git://git.infradead.org/users/eparis/notify:
  dnotify: ignore FS_EVENT_ON_CHILD
  inotify: fix coalesce duplicate events into a single event in special case
  inotify: deprecate the inotify kernel interface
  fsnotify: do not set group for a mark before it is on the i_list

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: hp_sdc_rtc - fix test in hp_sdc_rtc_read_rt()
  Input: atkbd - consolidate force release quirks for volume keys
  Input: logips2pp - model 73 is actually TrackMan FX
  Input: i8042 - add Sony Vaio VGN-FZ240E to the nomux list
  Input: fix locking issue in /proc/bus/input/ handlers
  Input: atkbd - postpone restoring LED/repeat rate at resume
  Input: atkbd - restore resetting LED state at startup
  Input: i8042 - make pnp_data_busted variable boolean instead of int
  Input: synaptics - add another Protege M300 to rate blacklist

* 'kvm-updates/2.6.32' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: Prevent kvm_init from corrupting debugfs structures
  KVM: MMU: fix pointer cast
  KVM: use proper hrtimer function to retrieve expiration time

* git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dm:
  dm snapshot: allow chunk size to be less than page size
  dm snapshot: use unsigned integer chunk size
  dm snapshot: lock snapshot while supplying status
  dm exception store: fix failed set_chunk_size error path
  dm snapshot: require non zero chunk size by end of ctr
  dm: dec_pending needs locking to save error value
  dm: add missing del_gendisk to alloc_dev error path
  dm log: userspace fix incorrect luid cast in userspace_ctr
  dm snapshot: free exception store on init failure
  dm snapshot: sort by chunk size to fix race

Increase TEST_SUSPEND_SECONDS to 10 so the warning in
suspend_test_finish() doesn't annoy the users of slower systems so much.

Also, make the warning print the suspend-resume cycle time, so that we
know why the warning actually triggered.

Patch prepared during the hacking session at the Kernel Summit in Tokyo.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This fixes a compile bug introduced in

	6ef297f8 (ARM: 5720/1: Move MMCI header to amba include dir)

That commit moved arch/arm/include/asm/mach/mmc.h to
include/linux/amba/mmci.h.  Just removing the include was enough.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Linus Walleij <linus.walleij@stericsson.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Bill Gatliff <bgat@billgatliff.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Pierre Ossman <drzeus@drzeus.cx>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'sh/for-2.6.32' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6:
  sh: Kill off stray HAVE_FTRACE_SYSCALLS reference.
  sh: Remove BKL from landisk gio.
  sh: disabled cache handling fix.
  sh: Fix up single page flushing to use PAGE_SIZE.

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: aesni-intel - Fix irq_fpu_usable usage
  crypto: padlock-sha - Fix stack alignment

Fix a (small) memory leak in one of the error paths of the NFS mount
options parsing code.

Regression introduced in 2.6.30 by commit a67d18f8 (NFS: load the
rpc/rdma transport module automatically).
Reported-by: Yinghai Lu <yinghai@kernel.org>
Reported-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This patch fixes a null pointer exception in pipe_rdwr_open() which
generates the stack trace:

> Unable to handle kernel NULL pointer dereference at 0000000000000028 RIP:
>  [<ffffffff802899a5>] pipe_rdwr_open+0x35/0x70
>  [<ffffffff8028125c>] __dentry_open+0x13c/0x230
>  [<ffffffff8028143d>] do_filp_open+0x2d/0x40
>  [<ffffffff802814aa>] do_sys_open+0x5a/0x100
>  [<ffffffff8021faf3>] sysenter_do_call+0x1b/0x67

The failure mode is triggered by an attempt to open an anonymous
pipe via /proc/pid/fd/* as exemplified by this script:

=============================================================
while : ; do
   { echo y ; sleep 1 ; } | { while read ; do echo z$REPLY; done ; } &
   PID=$!
   OUT=$(ps -efl | grep 'sleep 1' | grep -v grep |
        { read PID REST ; echo $PID; } )
   OUT="${OUT%% *}"
   DELAY=$((RANDOM * 1000 / 32768))
   usleep $((DELAY * 1000 + RANDOM % 1000 ))
   echo n > /proc/$OUT/fd/1                 # Trigger defect
done
=============================================================

Note that the failure window is quite small and I could only
reliably reproduce the defect by inserting a small delay
in pipe_rdwr_open(). For example:

 static int
 pipe_rdwr_open(struct inode *inode, struct file *filp)
 {
       msleep(100);
       mutex_lock(&inode->i_mutex);

Although the defect was observed in pipe_rdwr_open(), I think it
makes sense to replicate the change through all the pipe_*_open()
functions.

The core of the change is to verify that inode->i_pipe has not
been released before attempting to manipulate it. If inode->i_pipe
is no longer present, return ENOENT to indicate so.

The comment about potentially using atomic_t for i_pipe->readers
and i_pipe->writers has also been removed because it is no longer
relevant in this context. The inode->i_mutex lock must be used so
that inode->i_pipe can be dealt with correctly.
Signed-off-by: Earl Chew <earl_chew@agilent.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

In ks8851_set_rx_mode() the case handling IFF_MULTICAST was also setting
the RXCR1_AE bit by accident. This meant that all unicast frames where
being accepted by the device. Remove RXCR1_AE from this case.

Note, RXCR1_AE was also masking a problem with setting the MAC address
properly, so needs to be applied after fixing the MAC write order.

Fixes a bug reported by Doong, Ping of Micrel. This version of the
patch avoids setting RXCR1_ME for all cases.
Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

The MAC address register was being written in the wrong order, so add
a new address macro to convert mac-address byte to register address and
a ks8851_wrreg8() function to write each byte without having to worry
about any difficult byte swapping.

Fixes a bug reported by Doong, Ping of Micrel.
Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>