The xdp_tx_iptunnel program can be terminated in two ways, after
N-seconds or via Ctrl-C SIGINT.  The SIGINT code path does not
handle detatching the correct XDP program, in-case the program
was attached with XDP_FLAGS_SKB_MODE.

Fix this by storing the XDP flags as a global variable, which is
available for the SIGINT handler function.

Fixes: 3993f2cb ("samples/bpf: Add support for SKB_MODE to xdp1 and xdp_tx_iptunnel")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

The kernel side of XDP_FLAGS_SKB_MODE is unsigned, and the rtnetlink
IFLA_XDP_FLAGS is defined as NLA_U32. Thus, userspace programs under
samples/bpf/ should use the correct type.

Fixes: 3993f2cb ("samples/bpf: Add support for SKB_MODE to xdp1 and xdp_tx_iptunnel")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jakub Kicinski says:

====================
xdp: use netlink extended ACK reporting

This series is an attempt to make XDP more user friendly by
enabling exploiting the recently added netlink extended ACK
reporting to carry messages to user space.

David Ahern's iproute2 ext ack patches for ip link are sufficient
to show the errors like this:

Error: nfp: MTU too large w/ XDP enabled

Where the message is coming directly from the driver.  There could
still be a bit of a leap for a complete novice from the message
above to the right settings, but it's a big improvement over the
standard "Invalid argument" message.

v1/non-rfc:
 - add a separate macro in patch 1;
 - add KBUILD_MODNAME as part of the message (Daniel);
 - don't print the error to logs in patch 1.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Try to carry error messages to the user via the netlink extended
ack message attribute.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Try to carry error messages to the user via the netlink extended
ack message attribute.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Drivers usually have a number of restrictions for running XDP
- most common being buffer sizes, LRO and number of rings.
Even though some drivers try to be helpful and print error
messages experience shows that users don't often consult
kernel logs on netlink errors.  Try to use the new extended
ack mechanism to carry the message back to user space.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

As we propagate extended ack reporting throughout various paths in
the kernel it may be that the same function is called with the
extended ack parameter passed as NULL.  One place where that happens
is in drivers which have a centralized reconfiguration function
called both from ndos and from ethtool_ops.  Add a new helper for
setting the error message in such conditions.

Existing helper is left as is to encourage propagating the ext act
fully wherever possible.  It also makes it clear in the code which
messages may be lost due to ext ack being NULL.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch allows users to enable/disable internal TX and/or RX
clock delay for BCM5481x series PHYs so as to satisfy RGMII timing
specifications.

On a particular platform, whether TX and/or RX clock delay is required
depends on how PHY connected to the MAC IP. This requirement can be
specified through "phy-mode" property in the platform device tree.
Signed-off-by: Abhishek Shah <abhishek.shah@broadcom.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

trivial fix to spelling mistakes in printk message.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The bnx2x driver is not providing proper alignment on the receive buffers it
passes to build_skb(), causing skb_shared_info to be misaligned.
skb_shared_info contains an atomic, and while PPC normally supports
unaligned accesses, it does not support unaligned atomics.

Aligning the size of rx buffers will ensure that page_frag_alloc() returns
aligned addresses.

This can be reproduced on PPC by setting the network MTU to 1450 (or other
non-multiple-of-4) and then generating sufficient inbound network traffic
(one or two large "wget"s usually does it), producing the following oops:

Unable to handle kernel paging request for unaligned access at address 0xc00000ffc43af656
Faulting instruction address: 0xc00000000080ef8c
Oops: Kernel access of bad area, sig: 7 [#1]
SMP NR_CPUS=2048
NUMA
PowerNV
Modules linked in: vmx_crypto powernv_rng rng_core powernv_op_panel leds_powernv led_class nfsd ip_tables x_tables autofs4 xfs lpfc bnx2x mdio libcrc32c crc_t10dif crct10dif_generic crct10dif_common
CPU: 104 PID: 0 Comm: swapper/104 Not tainted 4.11.0-rc8-00088-g4c761daf #2
task: c00000ffd4892400 task.stack: c00000ffd4920000
NIP: c00000000080ef8c LR: c00000000080eee8 CTR: c0000000001f8320
REGS: c00000ffffc33710 TRAP: 0600   Not tainted  (4.11.0-rc8-00088-g4c761daf)
MSR: 9000000000009033 <SF,HV,EE,ME,IR,DR,RI,LE>
  CR: 24082042  XER: 00000000
CFAR: c00000000080eea0 DAR: c00000ffc43af656 DSISR: 00000000 SOFTE: 1
GPR00: c000000000907f64 c00000ffffc33990 c000000000dd3b00 c00000ffcaf22100
GPR04: c00000ffcaf22e00 0000000000000000 0000000000000000 0000000000000000
GPR08: 0000000000b80008 c00000ffc43af636 c00000ffc43af656 0000000000000000
GPR12: c0000000001f6f00 c00000000fe1a000 000000000000049f 000000000000c51f
GPR16: 00000000ffffef33 0000000000000000 0000000000008a43 0000000000000001
GPR20: c00000ffc58a90c0 0000000000000000 000000000000dd86 0000000000000000
GPR24: c000007fd0ed10c0 00000000ffffffff 0000000000000158 000000000000014a
GPR28: c00000ffc43af010 c00000ffc9144000 c00000ffcaf22e00 c00000ffcaf22100
NIP [c00000000080ef8c] __skb_clone+0xdc/0x140
LR [c00000000080eee8] __skb_clone+0x38/0x140
Call Trace:
[c00000ffffc33990] [c00000000080fb74] skb_clone+0x74/0x110 (unreliable)
[c00000ffffc339c0] [c000000000907f64] packet_rcv+0x144/0x510
[c00000ffffc33a40] [c000000000827b64] __netif_receive_skb_core+0x5b4/0xd80
[c00000ffffc33b00] [c00000000082b2bc] netif_receive_skb_internal+0x2c/0xc0
[c00000ffffc33b40] [c00000000082c49c] napi_gro_receive+0x11c/0x260
[c00000ffffc33b80] [d000000066483d68] bnx2x_poll+0xcf8/0x17b0 [bnx2x]
[c00000ffffc33d00] [c00000000082babc] net_rx_action+0x31c/0x480
[c00000ffffc33e10] [c0000000000d5a44] __do_softirq+0x164/0x3d0
[c00000ffffc33f00] [c0000000000d60a8] irq_exit+0x108/0x120
[c00000ffffc33f20] [c000000000015b98] __do_irq+0x98/0x200
[c00000ffffc33f90] [c000000000027f14] call_do_irq+0x14/0x24
[c00000ffd4923a90] [c000000000015d94] do_IRQ+0x94/0x110
[c00000ffd4923ae0] [c000000000008d90] hardware_interrupt_common+0x150/0x160
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 7e26bf45 ("net: bridge: allow SW learn to take over HW fdb
entries") added the ability to "take over an entry which was previously
learned via HW when it shows up from a SW port".

However, if an entry was learned via HW and then a control packet
(e.g., ARP request) was trapped to the CPU, the bridge driver will
update the entry and remove the externally learned flag, although the
entry is still present in HW. Instead, only clear the externally learned
flag in case of roaming.

Fixes: 7e26bf45 ("net: bridge: allow SW learn to take over HW fdb entries")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Arkadi Sharashevsky <arkadis@mellanox.com>
Cc: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

After commit 1215e51e ("ipv4: fix a deadlock in ip_ra_control")
we always take RTNL lock for ip_ra_control() which is the only place
we update the list ip_ra_chain, so the ip_ra_lock is no longer needed.

As Eric points out, BH does not need to disable either, RCU readers
don't care.
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The struct bpf_map_def was extended in commit fb30d4b7 ("bpf: Add tests
for map-in-map") with member unsigned int inner_map_idx.  This changed the size
of the maps section in the generated ELF _kern.o files.

Unfortunately the loader in bpf_load.c does not detect or handle this.  Thus,
older _kern.o files became incompatible, and caused hard-to-debug errors
where the syscall validation rejected BPF_MAP_CREATE request.

This patch only detect the situation and aborts load_bpf_file(). It also
add code comments warning people that read this loader for inspiration
for these pitfalls.

Fixes: fb30d4b7 ("bpf: Add tests for map-in-map")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

We recently added a check to see if nla_nest_start() fails.  There are
two issues with that.  First, if it fails then I don't think we should
call nla_nest_cancel().  Second, it's slightly convoluted but the
current code returns success but we should return -EMSGSIZE instead.

Fixes: a50fe0ff ("lwtunnel: check return value of nla_nest_start")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Presumably we never hit this return, but static checkers complain that
we need to unlock so we may as well fix that.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

My static checker complains that we're holding a mutex on this error
path.  Let's goto exit instead of returning directly.

Fixes: b0bccb69 ("qed: Change locking scheme for VF channel")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

lipeng says:

====================
net: hns: bug fix for HNS driver

This patchset add support defered dsaf probe when mdio and
mbigen module is not insmod.

For more details, please refer to individual patch.

change log:
V4 - > V5:
1. Float on net-next;
2. Delete patch "net: hns: fixed bug that skb used after kfree"
   from this patchset;

V3 -> V4:
1. Delete redundant commit message;
2. Add Reviewed-by: Matthias Brugger <mbrugger@suse.com>;

V2 -> V3:
1. Check return value when  platform_get_irq in hns_rcb_get_cfg;

V1 -> V2:
1. Return appropriate errno in hns_mac_register_phy;
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

In the hip06 and hip07 SoCs, phy connect to mdio bus.The mdio
module is probed with module_init, and, as such,
is not guaranteed to probe before the HNS driver. So we need
to support deferred probe.

We check for probe deferral in the mac init, so we not init DSAF
when there is no mdio, and free all resource, to later learn that
we need to defer the probe.
Signed-off-by: lipeng <lipeng321@huawei.com>
Reviewed-by: Yisen Zhuang <yisen.zhuang@huawei.com>
Reviewed-by: Matthias Brugger <mbrugger@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In the hip06 and hip07 SoCs, the interrupt lines from the
DSAF controllers are connected to mbigen hw module.
The mbigen module is probed with module_init, and, as such,
is not guaranteed to probe before the HNS driver. So we need
to support deferred probe.
Signed-off-by: lipeng <lipeng321@huawei.com>
Reviewed-by: Yisen Zhuang <yisen.zhuang@huawei.com>
Reviewed-by: Matthias Brugger <mbrugger@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jakub Kicinski says:

====================
nfp: optimize XDP TX and small fixes

This series optimizes the nfp XDP TX performance a little bit.
I run quick tests on an Intel(R) Xeon(R) CPU E5-2630 v4 @ 2.20GHz.
Single core/queue performance for both touch and drop and touch and
forward is above 20Mpps @64B packets, drop being 2Mpps faster.
I think this is max for a single queue on the low power NFPs.

There are also a few minor fixes included for code in net-next.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

For legacy reasons NFP FW may be compiled to DMA packets to a constant
offset into the buffer and use the space before it for metadata.  This
ensures that packets data always start at a certain offset regardless of
the amount of preceding metadata.

If rx offset is set to 0 there may still be up to 64 bytes of metadata
but metadata will start at the beginning of the buffer, instead of:

    data_start_offset = rx_offset - meta_len

Even though we make the buffers larger to accommodate up to 64 bytes of
metadata, if there is only N bytes of metadata, we will end up with
N bytes of headroom and 64 - N bytes of tailroom.  Therefore we can't
rely on that space for XDP headroom.  Make sure we always allocate
full 256 bytes.  This, unfortunately, means we can't fit the headroom
on an u8 any more.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Right now the required Service Process ABI version is still tied
to max ID of known commands.  For new NSP commands we are adding
we are checking if NSP version is recent enough on command-by-command
basis.  The driver doesn't have to force the device to have the
very latest flash, anything newer than 0.8 should do.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Reading TX queue indexes from the device memory on each interrupt
is expensive.  It's doubly expensive with XDP running since we have
two TX rings to check there.  If the software indexes indicate that
the TX queue is completely empty, however, we don't need to look at
the device completion index at all.

The queuing CPU is doing a wmb() before kicking the device TX so
we should be safe to assume on the CPU handling the completions will
never see old value of the software copy of the index.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

On the RX path we follow the "drop if allocation of replacement
buffer fails" rule.  With XDP we extended that to the TX action,
so if XDP prog returned TX but allocation of replacement RX buffer
failed, we will drop the packet.

To improve our XDP TX performance extend the idea of rings being
always full to XDP TX rings.  Pre-fill the XDP TX rings with RX
buffers, and when XDP prog returns TX action swap the RX buffer
with the next buffer from the TX ring.

XDP TX complete will no longer free the buffers but let them
sit on the TX ring and wait for swap with RX buffer, instead.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We will soon allocate RX buffers for caching on XDP TX rings.
The rx_ring parameter passed to nfp_net_rx_alloc_one() is not
actually used, remove it.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

As Or points out in commit 423b3aec ("net/mlx4: Change ENOTSUPP
to EOPNOTSUPP"), ENOTSUPP is NFS specific error.  Replace it with
EOPNOTSUPP.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Avoid hashing the tx napi struct into napi_hash[], which is used for
busy polling receive queues.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Initialise init_net.count to 1 for its pointer from init_nsproxy lest
someone tries to do a get_net() and a put_net() in a process in which
current->ns_proxy->net_ns points to the initial network namespace.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Creating a geneve link with 'udpcsum' set results in a creation of link
for which UDP checksum will NOT be computed on outbound packets, as can
be seen below.

11: gen0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN
    link/ether c2:85:27:b6:b4:15 brd ff:ff:ff:ff:ff:ff promiscuity 0
    geneve id 200 remote 192.168.13.1 dstport 6081 noudpcsum

Similarly, creating a link with 'noudpcsum' set results in a creation
of link for which UDP checksum will be computed on outbound packets.

Fixes: 9b4437a5 ("geneve: Unify LWT and netdev handling.")
Signed-off-by: Girish Moodalbail <girish.moodalbail@oracle.com>
Acked-by: Pravin B Shelar <pshelar@ovn.org>
Acked-by: Lance Richardson <lrichard@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jiri Benc says:

====================
vxlan: do not error out on disabled IPv6

This patchset fixes a bug with metadata based tunnels when booted with
ipv6.disable=1.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The message "Cannot bind port X, err=Y" creates only confusion. In metadata
based mode, failure of IPv6 socket creation is okay if IPv6 is disabled and
no error message should be printed. But when IPv6 tunnel was requested, such
failure is fatal. The vxlan_socket_create does not know when the error is
harmless and when it's not.

Instead of passing such information down to vxlan_socket_create, remove the
message completely. It's not useful. We propagate the error code up to the
user space and the port number comes from the user space. There's nothing in
the message that the process creating vxlan interface does not know.
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When IPv6 is compiled but disabled at runtime, __vxlan_sock_add returns
-EAFNOSUPPORT. For metadata based tunnels, this causes failure of the whole
operation of bringing up the tunnel.

Ignore failure of IPv6 socket creation for metadata based tunnels caused by
IPv6 not being available.

Fixes: b1be00a6 ("vxlan: support both IPv4 and IPv6 sockets in a single vxlan device")
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Replace pattern

 int status;
 ...
 status = func(...);
 return status;

by

 return func(...);

No functional change intented.
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Reuse bnx2x_null_format_ver() in functions where it's appropriated
instead of open coded variant.
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use scnprintf() when printing version instead of custom open coded variants.
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'linux-can-next-for-4.12-20170427' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next

Marc Kleine-Budde says:

====================
pull-request: can-next 2017-04-25

this is a pull request of 1 patch for net-next/master.

This patch by Oliver Hartkopp fixes the build of the broad cast manager
with CONFIG_PROC_FS disabled.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The description inside uapi/linux/bpf.h about bpf_get_socket_uid
helper function is no longer valid. It returns overflowuid rather
than 0 when failed.
Signed-off-by: Chenbo Feng <fengc@google.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

avoid direct access to sk->sk_state when tcp_poll() is called on a socket
using active TCP fastopen with deferred connect. Use local variable
'state', which stores the result of sk_state_load(), like it was done in
commit 00fd38d9 ("tcp: ensure proper barriers in lockless contexts").

Fixes: 19f6d3f3 ("net/tcp-fastopen: Add new API support")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Acked-by: Wei Wang <weiwan@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

While testing a fix [1] in ___pskb_trim(), addressing the WARN_ON_ONCE()
in skb_try_coalesce() reported by Andrey, I found that we had an skb
with skb->sk set but no skb->destructor.

This invalidated heuristic found in commit 158f323b ("net: adjust
skb->truesize in pskb_expand_head()") and in cited patch.

Considering the BUG_ON(skb->sk) we have in skb_orphan(), we should
restrain the temporary setting to a minimal section.

[1] https://patchwork.ozlabs.org/patch/755570/
    net: adjust skb->truesize in ___pskb_trim()

Fixes: 8f917bba ("bpf: pass sk to helper functions")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Since 83a77e9e, the phydev irq is explicitly set to PHY_POLL when
there is no pdata. It doesn't work on DT enabled platforms because the
phydev irq is already set by libphy before.

Fixes: 83a77e9e ("net: macb: Added PCI wrapper for Platform Driver.")
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>