- 15 Jul, 2014 6 commits
-
-
Varka Bhadram authored
This patch convert printk() to netdev_dbg/info/err or dev_info/err/dbg Signed-off-by: Varka Bhadram <varkab@cdac.in> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Varka Bhadram authored
This patch replace ioremap() with the devm_ioremap() so that the resource will be freed automatically with the probe failed. Signed-off-by: Varka Bhadram <varkab@cdac.in> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Varka Bhadram authored
This patch moves the remove functionalities after the probe so that we can see the registered and released resources properly. Every driver follows the same concept. Signed-off-by: Varka Bhadram <varkab@cdac.in> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Shradha Shah says: ==================== sfc: Add 40G support This patch series adds support for Solarflare 7000 series 40G Solarflare network adapters starting with the SFN7X42Q. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Edward Cree authored
Needed to select 40G mode on a 10G/40G capable card. Signed-off-by: Shradha Shah <sshah@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Mateusz Wrzesinski authored
Signed-off-by: Shradha Shah <sshah@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 14 Jul, 2014 17 commits
-
-
David S. Miller authored
Tom Herbert says: ==================== udp: UDP tunnel enhancements - Add udp_sock_create in new helper module udp_tunnel. Tunnel implementations call this function to create listener UDP ports. - Make vxlan and l2tp call udp_sock_create. - Move udp_tunnel_segment into udp_offload.c. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Tom Herbert authored
Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Tom Herbert authored
In l2tp driver call common function udp_sock_create to create the listener UDP port. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Tom Herbert authored
In vxlan driver call common function udp_sock_create to create the listener UDP port. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Tom Herbert authored
Added udp_tunnel.c which can contain some common functions for UDP tunnels. The first function in this is udp_sock_create which is used to open the listener port for a UDP tunnel. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Fabian Frederick says: ==================== drivers/net: remove unnecessary break after goto Small patchset addressing break redundancy on drivers/net branch (suggested by Joe Perches). V2: cc to maintainers of each section. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Fabian Frederick authored
Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Fabian Frederick authored
Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Fabian Frederick authored
Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Fabian Frederick authored
Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Fabian Frederick authored
Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Fabian Frederick authored
Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Fabian Frederick authored
Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Fabian Frederick authored
Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Fabian Frederick authored
Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
Add const attribute to filter argument to make clear it is no longer modified. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-nextDavid S. Miller authored
John W. Linville says: ==================== Please pull this batch of updates intended for the 3.17 stream... This is primarily a Bluetooth pull. Gustavo says: "A lot of patches to 3.17. The bulk of changes here are for LE support. The 6loWPAN over Bluetooth now has it own module, we also have support for background auto-connection and passive scanning, Bluetooth device address provisioning, support for reading Bluetooth clock values and LE connection parameters plus many many fixes." The balance is just a pull of the wireless.git tree, to avoid some pending merge problems. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 11 Jul, 2014 13 commits
-
-
Himangi Saraogi authored
The semantic patch that makes this transformation is as follows: // <smpl> @@ expression e; @@ -if (e) BUG(); +BUG_ON(e); // </smpl> Signed-off-by: Himangi Saraogi <himangi774@gmail.com> Acked-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Himangi Saraogi authored
The semantic patch that makes the transformation is as follows: // <smpl> @@ expression e; @@ -if (e) BUG(); +BUG_ON(e); // </smpl> Signed-off-by: Himangi Saraogi <himangi774@gmail.com> Acked-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
This patch introduces a possibility for userspace to set various (so far two) modes of generating addresses. This is useful for example for NetworkManager because it can set the mode to NONE and take care of link local addresses itself. That allow it to have the interface up, monitoring carrier but still don't have any addresses on it. One more use-case by Dan Williams: <quote> WWAN devices often have their LL address provided by the firmware of the device, which sometimes refuses to respond to incorrect LL addresses when doing DHCPv6 or IPv6 ND. The kernel cannot generate the correct LL address for two reasons: 1) WWAN pseudo-ethernet interfaces often construct a fake MAC address, or read a meaningless MAC address from the firmware. Thus the EUI64 and the IPv6LL address the kernel assigns will be wrong. The real LL address is often retrieved from the firmware with AT or proprietary commands. 2) WWAN PPP interfaces receive their LL address from IPV6CP, not from kernel assignments. Only after IPV6CP has completed do we know the LL address of the PPP interface and its peer. But the kernel has already assigned an incorrect LL address to the interface. So being able to suppress the kernel LL address generation and assign the one retrieved from the firmware is less complicated and more robust. </quote> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arvid Brodin authored
MacAddressB is an array (unsigned char MacAddressB[ETH_ALEN]) and is allocated as a part of *node_dst (which is a struct hsr_node). So the condition is always false. Detected by Dan Carpenter. Signed-off-by: Arvid Brodin <arvid.brodin@alten.se> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Hayes Wang says: ==================== r8169: support IPv6 The RTL8168C and the later chips support the hardware checksum for IPv6. Adjust some code and add the relative code. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
hayeswang authored
Support the IPv6 hw checksum for RTL8111C and later chips. Note that the hw has the limitation for the transport offset. The checksum must be calculated by sw, when the transport offset is out of the range which the hw accepts. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
hayeswang authored
Replace large send with giant send for TSO for RTL8111C and later ICs. The large send setting of the RTL8111DP is different from the other chips. However, the giant send setting is the same for all the chips which support it. Use the giant send to synchronize the settings. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
hayeswang authored
According to the txd_version, split rtl8169_tso_csum() into rtl8169_tso_csum_v1() and rtl8169_tso_csum_v2(). Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Li RongQing authored
Signed-off-by: Li RongQing <roy.qing.li@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Stefan Sørensen authored
Event timestamp values should be adjusted by 3*reference clock period + 11 ns = 35 ns to compensate for input path and synchronization delays. So subtract 35ns from event timestamps. Signed-off-by: Stefan Sørensen <stefan.sorensen@spectralink.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
John W. Linville authored
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem
-
David S. Miller authored
Ezequiel Garcia says: ==================== Network driver for Armada 375 SoC This is the fourth round of the Armada 375 network support patchset. I've tried to address all the feedback provided for last version and I hope the driver looks better now. If there's nothing else to fix, we'd like to merge this for v3.17. The first patch should go through the network tree, and the other patches through the mvebu tree. Thanks a lot for all the great review, and feel free to comment some more! Changes from v3: * Further optimization of the MTU, MAC and ring parameter change to make it smoothier. * Lots of cleanups in the parser configuration code, most of them addressing the feedback from Francois. This include fixing: missing curly braces, excessive parenthesis, excessive scope, and making several functions more readable. * Removed the Rx/Tx queue number module parameter. There's no reason to use any other than the default hardware-defined value. Changes from v2: * Reworked mvpp2_prs_tcam_first_free() as suggested by Joe and Francois, to have a single loop instead of two. * Replaced mvpp2_cpu_interrupts_enable/disable(pp, cpu) with one function that enables/disable interrupts on all the CPUs at once. * Factor out Tx descriptor DMA unmap + descriptor put sequence to have more readable code, as suggested by Francois. * Remove redundant netif_running() checks in the ingress and egress path, as suggested by Francois. * Reworked ring parameter, MTU and MAC address setting to produce a more gentle modification of the parameter, and have a fallback in the event of a failure. * Fixed a percpu memory leak on error path, also noted by Francois. * Removed the usage of the legacy net_device irq field, requested by Francois. * Removed the unneeded multiple Tx port support. It was hardcoded to a single Tx port in the previous version so we decided to drop it and simplify the code. * Optimize the on_each_cpu() calls to clear the sent counters and the TX_DONE pkts coalescing setting. on_each_cpu is expensive so it's better to minize the calls to it. Changes from v1: * Marcin Wojtas is the author of the driver, so I fixed authorship for patch 1/3: "ethernet: Add new driver for Marvell Armada 375 network unit" This patchset adds a new network driver to support the network controller in Armada 375 SoC. The network interfaces share a common hardware unit called Packet Processor, which contains a common register space and per-port register spaces. The new network unit has different RXQ and TXQ management. The ports associate so-called per-port "logical queues" which are mapped to "physical queues". The latter are shared among the ports. Fo the egress part, the mapping for each port is predefined by hardware. The egress path incorporates so-called aggregation queues (one per CPU), from where the data is passed to the physical queues and then via prefetch buffer to the TxDMA. The ingress path has a Parser and Classifier (PnC) and a Buffer Manager (BM) whose usage is obligatory. We are only implementing a simple configuration for the Parser and Classifier, yet the code is considerably large. This network unit has other optional features like xPON, WoL, Hardware Forwarding, and more. This initial commit doesn't provide support for these. The mvpp2 network driver has been written by Marcin Wojtas and then reviewed and cleaned up by Ezequiel Garcia. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Marcin Wojtas authored
This commit adds a new network driver for the network controller in Marvell Armada 375 SoC. Given the controller is very different from the ones in the other Marvell SoCs that use the mv643xx_eth (Kirkwood, Orion, Discovery) and mvneta (Armada 370/38x/XP) drivers, a new driver is needed. Signed-off-by: Marcin Wojtas <mw@semihalf.com> [Ezequiel: coding style cleanup] Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 10 Jul, 2014 4 commits
-
-
Li RongQing authored
d9333196(ipv6: Allow accepting RA from local IP addresses.) made the wrong check, whether or not to accept RA with source-addr found on local machine, when accept_ra_from_local is 0. Fixes: d9333196(ipv6: Allow accepting RA from local IP addresses.) Cc: Ben Greear <greearb@candelatech.com> Cc: Hannes Frederic Sowa <hannes@redhat.com> Signed-off-by: Li RongQing <roy.qing.li@gmail.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Varka Bhadram authored
This patch fix the debug message format. This patch changes to the commit f160a2d0: net: cpmac: dynamic debug fixes When we use pr_debug()/netdev_dbg() new lines are inserting in b/w the values. The format when i use the printk() These formats used in skb dump and reg dump. This functions called from the entire code. So this will be enabled all the lines. Signed-off-by: Varka Bhadram <varkab@cdac.in> Signed-off-by: David S. Miller <davem@davemloft.net>
-
John W. Linville authored
Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
-