- 19 Feb, 2016 40 commits
-
-
Sakari Ailus authored
The allocation takes place in longs. Assign the size of the enum accordingly. Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Mauro Carvalho Chehab authored
drivers/media/platform/vsp1/vsp1_drm.c:47:5: warning: no previous prototype for 'vsp1_du_init' [-Wmissing-prototypes] int vsp1_du_init(struct device *dev) ^ drivers/media/platform/vsp1/vsp1_drm.c:76:5: warning: no previous prototype for 'vsp1_du_setup_lif' [-Wmissing-prototypes] int vsp1_du_setup_lif(struct device *dev, unsigned int width, ^ drivers/media/platform/vsp1/vsp1_drm.c:221:6: warning: no previous prototype for 'vsp1_du_atomic_begin' [-Wmissing-prototypes] void vsp1_du_atomic_begin(struct device *dev) ^ drivers/media/platform/vsp1/vsp1_drm.c:273:5: warning: no previous prototype for 'vsp1_du_atomic_update' [-Wmissing-prototypes] int vsp1_du_atomic_update(struct device *dev, unsigned int rpf_index, ^ drivers/media/platform/vsp1/vsp1_drm.c:451:6: warning: no previous prototype for 'vsp1_du_atomic_flush' [-Wmissing-prototypes] void vsp1_du_atomic_flush(struct device *dev) ^ Signed-off-by: -
Laurent Pinchart authored
The IP version number carries enough information to identify the exact device instance features. Drop the related DT properties and use the IP version instead. Signed-off-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by:
-
Takashi Saito authored
Display lists contain lists of registers and associated values to be applied atomically by the hardware. They lower the pressure on interrupt processing delays when reprogramming the device as settings can be prepared well in advance and queued to the hardware without waiting for the end of the current frame. Display list support is currently limited to the DRM pipeline. Signed-off-by:
Koji Matsuoka <koji.matsuoka.xm@renesas.com> Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Laurent Pinchart authored
Add DT compatible strings for the VSP2 instances found in the R-Car Gen3 SoCs and support them in the vsp1 driver. Signed-off-by:
-
Laurent Pinchart authored
Add two API functions named vsp1_du_atomic_begin() and vsp1_du_atomic_flush() to signal the start and end of an atomic update. The vsp1_du_setup_rpf() function is renamed to vsp1_du_atomic_update() for consistency. With this new API, the driver will reprogram all modified inputs atomically before restarting the video stream. Signed-off-by:
-
Laurent Pinchart authored
Signed-off-by:
-
Laurent Pinchart authored
Implement internal control of the VSP pipeline to be used by the DU DRM/KMS driver when using the VSP as an internal composer handled through DRM/KMS only. Signed-off-by:
-
Laurent Pinchart authored
As the pipeline is configured internally by the driver when the userspace API is disabled its configuration can be trusted and link validation isn't needed. Signed-off-by:
-
Laurent Pinchart authored
The RPF and WPF alpha values are set through V4L2 controls and applied when starting the video stream by a call to v4l2_ctrl_handler_setup(). As that function uses the control handler mutex it can't be called in interrupt context, where the VSP+DU pipeline handler might need to reconfigure the pipeline. Set the alpha value manually in the RPF and WPF s_stream handler to ensure that the hardware is properly configured even when controlled without the userspace API. If the userspace API is enabled protect that with the control lock to avoid race conditions with userspace. Signed-off-by:
-
Laurent Pinchart authored
The pipeline inputs array stores pointers to all RPFs contained in the pipeline. It's currently indexed contiguously by adding RPFs in the order they are found during graph walk. This can't easily support dynamic addition and removal of RPFs while streaming, which will be required for combined VSP+DU support. Make the array indexed by RPF index instead and skip NULL elements when iterating over RPFs. Signed-off-by:
-
Laurent Pinchart authored
The R-Car Gen3 SoCs include VSP instances dedicated to the DU that will be controlled entirely by the rcar-du-drm driver through the KMS API. To support that use case make the userspace V4L2 API optional. Signed-off-by:
-
Laurent Pinchart authored
Format information and the related helper function are not specific to the V4L2 API, move them from vsp1_video.c to vsp1_pipe.c. Signed-off-by:
-
Laurent Pinchart authored
Not all VSP instances have a BRU on R-Car Gen3, make it optional. Set the feature unconditionally for now, this will be fixed when adding Gen3 support. Signed-off-by:
-
Laurent Pinchart authored
The R-Car Gen3 family has 5-inputs BRUs, support them by making the number of BRU inputs configurable. As the driver assumes that the number of BRU inputs is equal to the number of RPFs, replace the BRU_MAX_INPUTS macro with VSP1_MAX_RPF to make the assumption apparent. Signed-off-by:
-
Laurent Pinchart authored
The function will be used by the DU code, move it out of vsp1_video.c. Signed-off-by:
-
Laurent Pinchart authored
Several module read functions are not used, remove them. Signed-off-by:
-
Laurent Pinchart authored
Commit 58f896d8 ("[media] v4l: vsp1: sru: Make the intensity controllable during streaming") refactored the stream start code and removed the SRU CTRL0 register write by mistake. Add it back. Fixes: 58f896d8 ("[media] v4l: vsp1: sru: Make the intensity controllable during streaming") Signed-off-by:
-
Laurent Pinchart authored
Rename the VI6_DISP_IRQ_STA_DSE register bit to VI6_DISP_IRQ_STA_DST to fix a typo and match the datasheet. Signed-off-by:
-
Laurent Pinchart authored
Signed-off-by:
-
Laurent Pinchart authored
Link creation will be handled differently for the DU pipeline. Signed-off-by:
-
Laurent Pinchart authored
No need to waste CPU cycles when the value we need is already available. Signed-off-by:
-
Laurent Pinchart authored
The code will be reused outside of vsp1_video.c. Signed-off-by:
-
Laurent Pinchart authored
Those functions are specific to video nodes, rename them for consistency. Signed-off-by:
-
Laurent Pinchart authored
The code will be used to control the vsp1 driver from the DU driver without using video nodes. Signed-off-by:
-
Laurent Pinchart authored
To make the pipeline structure and operations usable without video devices the frame end processing must be decoupled from struct vsp1_video. Implement this by calling the video frame end function indirectly through a function pointer in struct vsp1_pipeline. Signed-off-by:
-
Laurent Pinchart authored
The field is always equal to the num_inputs field plus one, remove the duplicate. Signed-off-by:
-
Laurent Pinchart authored
Only RPFs and WPFs can be associated with video nodes, don't waste memory by storing the video pointer in all entities. Signed-off-by:
-
Laurent Pinchart authored
Not all VSP1 instances include a UDS. Make the renesas,#uds DT property optional and accept a number of UDS equal to 0 as valid. Signed-off-by:
-
Laurent Pinchart authored
The rwpf queue operation doesn't queue a buffer but sets the memory address for the next run. Rename it to set_memory and pass it a new structure independent of the video buffer than only contains memory information. Signed-off-by:
-
Laurent Pinchart authored
To make the video device nodes optional we need to decouple the [rw]pf instances from the video devices. Move video devices out of struct vsp1_rwpf and instantiate them dynamically in the core driver code. Signed-off-by:
-
Laurent Pinchart authored
The structure represent a vsp1 videobuf2 buffer, name it accordingly. Signed-off-by:
-
Laurent Pinchart authored
This removes the dependency of vsp1_rpf and vsp1_wpf on vsp1_video, making it possible to reuse the operations without a V4L2 video device node. Signed-off-by:
-
Laurent Pinchart authored
Move the format from struct vsp1_video to struct vsp1_rwpf to prepare for VSPD KMS support that will not instantiate V4L2 video device nodes. Signed-off-by:
-
Laurent Pinchart authored
The rwpf field contains a pointer to the rpf or wpf associated with the video node. Instead of storing it as a vsp1_entity, store the corresponding vsp1_rwpf pointer to allow accessing the vsp1_rwpf fields directly. Signed-off-by:
-
Laurent Pinchart authored
There's no need to spread the code across multiple source files. Signed-off-by:
-
Laurent Pinchart authored
Tri-planar memory formats store the Y, U and V components in separate planes. The VSP hardware supports them, the driver now does too. Signed-off-by:
-
Laurent Pinchart authored
The formats use three planes through the multiplanar API, allowing for non-contiguous planes in memory. Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
-
Benoit Parrot authored
Fix the following sparse warnings: ti-vpe/cal.c:387:26: warning: incorrect type in return expression (different address spaces) ti-vpe/cal.c:459:26: warning: incorrect type in return expression (different address spaces) ti-vpe/cal.c:503:27: warning: incorrect type in argument 6 (different address spaces) ti-vpe/cal.c:509:47: warning: incorrect type in argument 6 (different address spaces) ti-vpe/cal.c:518:47: warning: incorrect type in argument 6 (different address spaces) ti-vpe/cal.c:526:31: warning: incorrect type in argument 6 (different address spaces) ti-vpe/cal.c:1807:24: warning: Using plain integer as NULL pointer ti-vpe/cal.c:1844:16: warning: Using plain integer as NULL pointer Signed-off-by:
Benoit Parrot <bparrot@ti.com> Signed-off-by:
-
Wu-Cheng Li authored
There is a new control V4L2_CID_MPEG_VIDEO_FORCE_KEY_FRAME to force an encoder key frame. It is the same as requesting V4L2_MPEG_MFC51_VIDEO_FORCE_FRAME_TYPE_I_FRAME. Signed-off-by:
Wu-Cheng Li <wuchengli@chromium.org> Acked-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
-
