- 07 Sep, 2005 40 commits
-
-
Richard Purdie authored
Add keyboard and touchscreen device definitions for corgi. Signed-off-by:
Richard Purdie <rpurdie@rpsys.net> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Richard Purdie authored
The corgi keyboard has need of a switch event type with slightly type to the input system as recommended by the input maintainer. Signed-off-by:
-
Richard Purdie authored
This patch moves the platform specific Sharp SL-C7x0 LCD code from the w100fb driver into a more appropriate place and updates the Corgi code to match the new w100fb driver. It also updates the corgi touchscreen code to match the new simplified interface available from w100fb. Signed-off-by:
-
Richard Purdie authored
The code w100fb was based on was horribly Sharp SL-C7x0 specific and there was little else that could be done as I had no access to anything else with a w100 in it. There is no real documentation about this chipset available. Ian Molton has access to other platforms with the w100 (Toshiba e-series) and so between us, we've improved w100fb and made it platform independent. Ian Molton also added support for the very similar w3220 and w3200 chipsets. There are a lot of changes here and it nearly amounts to a rewrite of the driver but it has been extensively tested and is being used in preference to the original driver in the Zaurus community. I'd therefore like to update the mainline code to reflect this. Signed-off-by:
Antonino Daplas <adaplas@pol.net> Signed-off-by:
-
Richard Purdie authored
Corgi Touchscreen bugfix. If the PMU isn't running, the register needs to be set to a sane value rather than reusing some random value. Signed-off-by:
-
Richard Purdie authored
Clean up some Corgi Touchscreen logic and merge the repeat calls to w100fb_blanking() in anticipation of the w100fb patch. Fix a pm_message_t reference. Signed-off-by:
-
Richard Purdie authored
The Corgi Touchscreen driver uses the PMU as an accurate timing source which conflicts with its usage for performance monitoring. This patch allows it to be shared with other users such as oprofile. Signed-off-by:
-
Richard Purdie authored
The input system handles key state tracking so there's no need for the driver to do so as well. Also tidy up some comment formatting and remove a now unneeded function. Signed-off-by:
-
Richard Purdie authored
Add some power management code to the corgi keyboard driver so that only one power event gets reported within any reasonable time frame and the driver doesn't enter an infinte loop due to key repeat. Signed-off-by:
-
Richard Purdie authored
Fix a couple of compile errors in the corgi keyboard driver. Signed-off-by:
-
Pierre Ossman authored
Only show the scr file in sysfs for SD cards. Previously this was present for all cards but had a contents of 0 for MMC cards. Signed-off-by:
Pierre Ossman <drzeus@drzeus.cx> Signed-off-by:
-
Pierre Ossman authored
Add support for Secure Digital specific features in the wbsd driver. Adds support for read-only switch and wide bus transfers. Signed-off-by:
-
Richard Purdie authored
Add a write protection switch handling code to the PXA MMC driver so that platform specific code can provide it if available. Signed-off-by:
-
Pierre Ossman authored
Credit where credit is due. Signed-off-by:
-
Pierre Ossman authored
Infrastructure for 4-bit bus transfers with SD cards. Signed-off-by:
-
Pierre Ossman authored
Export the SCR register through sysfs. Signed-off-by:
-
Pierre Ossman authored
Read the SD specific SCR register from the card. Signed-off-by:
-
Pierre Ossman authored
Support for the read-only switch on SD cards which must be enforced by the host. Signed-off-by:
-
Pierre Ossman authored
Support for the Secure Digital protocol in the MMC layer. A summary of the legal issues surrounding SD cards, as understood by yours truly: Members of the Secure Digital Association, hereafter SDA, are required to sign a NDA[1] before given access to any specifications. It has been speculated that including an SD implementation would forbid these members to redistribute Linux. This is the basic problem with SD support so it is unclear if it even is a problem since it has no effect on those of us that aren't members. The SDA doesn't seem to enforce these rules though since the patches included here are based on documentation made public by some of the members. The most complete specs[2] are actually released by Sandisk, one of the founding companies of the SDA. Because of this the NDA is considered a non-issue by most involved in the discussions concerning these patches. It might be that the SDA is only interested in protecting the so called "secure" bits of SD, which so far hasn't been found in any public spec. (The card is split into two sections, one "normal" and one "secure" which has an access scheme similar to TPM:s). (As a side note, Microsoft is working to make things easier for us since they want to be able to include the source code for a SD driver in one of their development kits. HP is making sure that the new NDA will allow a Linux implementation. So far only the SDIO specs have been opened up[3]. More will hopefully follow.) [1] http://www.sdcard.org/membership/images/ippolicy.pdf [2] http://www.sandisk.com/pdf/oem/ProdManualSDCardv1.9.pdf [3] http://www.sdcard.org/sdio/Simplified%20SDIO%20Card%20Specification.pdf This patch contains the central parts of the SD support. If no MMC cards are found on a bus then the MMC layer proceeds looking for SD cards. Helper functions are extended to handle the special needs of SD cards. Signed-off-by:
-
Roman Zippel authored
This adds NLS support to HFS. Using the kernel options iocharset and codepage it's possible to map the disk encoding to a local mapping. If these options are not used, it falls back to the old direct mapping. Signed-off-by:
Roman Zippel <zippel@linux-m68k.org> Signed-off-by:
-
Roman Zippel authored
This adds support for show_options. It also fixes some namespace polution in the hfsplus driver. Signed-off-by:
-
Roman Zippel authored
This removes some old debug code, which is no longer needed. Signed-off-by:
-
Corey Minyard authored
The IPMI power control function proc_write_chassctrl was badly written, it directly used userspace pointers, it assumed that strings were NULL terminated, and it used the evil sscanf function. This converts over to using the sysctl interface for this data and changes the semantics to be a little more logical. Signed-off-by:
Corey Minyard <minyard@acm.org> Cc: <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by:
-
Corey Minyard authored
This removes the unused "all_cmd_rcvr" variable from the IPMI driver. Signed-off-by:
-
Corey Minyard authored
Clean up various style issues in the IPMI driver. Should be no functional changes. Signed-off-by:
-
Corey Minyard authored
This patch allows Dell servers with IPMI controllers that predate IPMI 1.5 to use the standard poweroff or powercycle commands. These systems firmware don't set the chassis capability bit in the Get Device ID, but they do implement the standard poweroff and powercycle commands. Tested on RHEL3 kernel 2.4.21-20.ELsmp on a PowerEdge 2600. The standard ipmi_poweroff driver cannot drive these systems. With this patch, they power off or powercycle as expected. Signed-off-by:
Matt Domsch <Matt_Domsch@dell.com> Signed-off-by:
-
Corey Minyard authored
The "null message handler" in the IPMI driver is used in startup and panic situations to handle messages. It was only designed to work with messages from the local management controller, but in some cases it was used to get messages from remote managmenet controllers, and the system would then panic. This patch makes the "null message handler" in the IPMI driver more general so it works with any kind of message. Signed-off-by:
-
Corey Minyard authored
This adds MODULE_VERSION, MODULE_DESCRIPTION, and MODULE_AUTHOR tags to the IPMI driver modules. Also changes the MODULE_VERSION to remove the prepended 'v' on each value, consistent with the module versioning policy. This patch also removes all the version information from everything except the ipmi_msghandler module. Signed-off-by:
-
Corey Minyard authored
The ipmi driver does not have a way to handle firmware-generated events which have the OEM[012] Data Available flags set. In such a case, the SMS_ATN bit may never get cleared by firmware, leaving the driver looping infinitely but never able to make any progress. This patch first simplifies storage and use of the data returned from an IPMI Get Device ID command. It then creates a new per-OEM handler hook, which should know how to handle events with the OEM[012] Data Available flags set. It then uses this to implement a workaround for IPMI 1.5-capable Dell PowerEdge servers which are susceptable to setting the OEM[012] Data Available flags when the driver can't handle it. Signed-off-by:
-
Corey Minyard authored
The IPMI driver include file needs to include compiler.h so it has definitions for __user and such. Signed-off-by:
-
Corey Minyard authored
There are some interactions between IPMI NMI timeouts and the other operations of the IPMI driver. This make sure those interactions are handled properly. Signed-off-by:
-
Corey Minyard authored
Fix some problems with the high-res timer support. Signed-off-by:
-
Corey Minyard authored
IPMI allows multiple IPMB channels on a single interface, and each channel might have a different IPMB address. However, the driver has only one IPMB address that it uses for everything. This patch adds new IOCTLS and a new internal interface for setting per-channel IPMB addresses and LUNs. New systems are coming out with support for multiple IPMB channels, and they are broken without this patch. Signed-off-by:
-
Andrey Panin authored
This patch replaces homebrew DMI scanning code in IPMI System Interface driver with dmi_find_device() call. Signed-off-by:
Andrey Panin <pazke@donpac.ru> Cc: Corey Minyard <minyard@acm.org> Signed-off-by:
-
Pekka Enberg authored
This patch introduces a memory-leak tracking version of kzalloc for ALSA. Signed-off-by:
Pekka Enberg <penberg@cs.helsinki.fi> Cc: Jaroslav Kysela <perex@suse.cz> Signed-off-by:
Jiri Slaby <xslaby@fi.muni.cz> Signed-off-by:
-
Pekka Enberg authored
This patch converts kcalloc(1, ...) calls to use the new kzalloc() function. Signed-off-by:
-
Pekka Enberg authored
This patch converts kcalloc(1, ...) calls to use the new kzalloc() function. Signed-off-by:
-
Pekka Enberg authored
This patch converts kcalloc(1, ...) calls to use the new kzalloc() function. Signed-off-by:
-
Pekka Enberg authored
This patch converts kcalloc(1, ...) calls to use the new kzalloc() function. Signed-off-by:
-
Pekka Enberg authored
This patch converts kcalloc(1, ...) calls to use the new kzalloc() function. Signed-off-by:
-
