- 01 Oct, 2015 5 commits
-
-
Jeff Vander Stoep authored
commit bf0c4e04 upstream. Move the poison pointer offset to 0xdead000000000000, a recognized value that is not mappable by user-space exploits. Acked-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
Thierry Strudel <tstrudel@google.com> Signed-off-by:
Jeff Vander Stoep <jeffv@google.com> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Bob Copeland authored
commit 3633ebeb upstream. We already set a station to be associated when peering completes, both in user space and in the kernel. Thus we should always have an associated sta before sending data frames to that station. Failure to check assoc state can cause crashes in the lower-level driver due to transmitting unicast data frames before driver sta structures (e.g. ampdu state in ath9k) are initialized. This occurred when forwarding in the presence of fixed mesh paths: frames were transmitted to stations with whom we hadn't yet completed peering. Reported-by:
Alexis Green <agreen@cococorp.com> Tested-by:
Jesse Jones <jjones@cococorp.com> Signed-off-by:
Bob Copeland <me@bobcopeland.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Jean Delvare authored
commit d3d11fe0 upstream. The temperature registers appear to report values in degrees Celsius while the hwmon API mandates values to be exposed in millidegrees Celsius. Do the conversion so that the values reported by "sensors" are correct. Fixes: aed93e0b ("tg3: Add hwmon support for temperature") Signed-off-by:
Jean Delvare <jdelvare@suse.de> Cc: Prashant Sreedharan <prashant@broadcom.com> Cc: Michael Chan <mchan@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Adrien Schildknecht authored
commit 1642d09f upstream. The v2 of NetGear WNA1000M uses a different idProduct: USB ID 0846:9043 Signed-off-by:
Adrien Schildknecht <adrien+dev@schischi.me> Acked-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Eric W. Biederman authored
commit 12c641ab upstream. In the logic in the initial commit of unshare made creating a new thread group for a process, contingent upon creating a new memory address space for that process. That is wrong. Two separate processes in different thread groups can share a memory address space and clone allows creation of such proceses. This is significant because it was observed that mm_users > 1 does not mean that a process is multi-threaded, as reading /proc/PID/maps temporarily increments mm_users, which allows other processes to (accidentally) interfere with unshare() calls. Correct the check in check_unshare_flags() to test for !thread_group_empty() for CLONE_THREAD, CLONE_SIGHAND, and CLONE_VM. For sighand->count > 1 for CLONE_SIGHAND and CLONE_VM. For !current_is_single_threaded instead of mm_users > 1 for CLONE_VM. By using the correct checks in unshare this removes the possibility of an accidental denial of service attack. Additionally using the correct checks in unshare ensures that only an explicit unshare(CLONE_VM) can possibly trigger the slow path of current_is_single_threaded(). As an explict unshare(CLONE_VM) is pointless it is not expected there are many applications that make that call. Fixes: b2e0d987 userns: Implement unshare of the user namespace Reported-by:
Ricky Zhou <rickyz@chromium.org> Reported-by:
Kees Cook <keescook@chromium.org> Reviewed-by:
"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
-
- 21 Sep, 2015 22 commits
-
-
Greg Kroah-Hartman authored
-
Max Filippov authored
commit 123f15e6 upstream. -e is not needed to output strings without escape sequences. This breaks big endian FSF build when the shell is dash, because its builtin echo doesn't understand '-e' switch and outputs it in the echoed string. Reported-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Max Filippov <jcmvbkbc@gmail.com> Signed-off-by:
Chris Zankel <chris@zankel.net> Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by:
-
Mikulas Patocka authored
commit f49a26e7 upstream. Update ctime and mtime when a directory is modified. (though OS/2 doesn't update them anyway) Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Grant Likely authored
commit 7f5dcaf1 upstream. The unregister path of platform_device is broken. On registration, it will register all resources with either a parent already set, or type==IORESOURCE_{IO,MEM}. However, on unregister it will release everything with type==IORESOURCE_{IO,MEM}, but ignore the others. There are also cases where resources don't get registered in the first place, like with devices created by of_platform_populate()*. Fix the unregister path to be symmetrical with the register path by checking the parent pointer instead of the type field to decide which resources to unregister. This is safe because the upshot of the registration path algorithm is that registered resources have a parent pointer, and non-registered resources do not. * It can be argued that of_platform_populate() should be registering it's resources, and they argument has some merit. However, there are quite a few platforms that end up broken if we try to do that due to overlapping resources in the device tree. Until that is fixed, we need to solve the immediate problem. Cc: Pantelis Antoniou <pantelis.antoniou@konsulko.com> Cc: Wolfram Sang <wsa@the-dreams.de> Cc: Rob Herring <robh@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by:
Grant Likely <grant.likely@linaro.org> Tested-by:
Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Tested-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
David Daney authored
commit 3a496b00 upstream. If the internal call to of_address_to_resource() fails, we end up looping forever in of_find_matching_node_by_address(). This can be caused by a defective device tree, or calling with an incorrect matches argument. Fix by calling of_find_matching_node() unconditionally at the end of the loop. Signed-off-by:
David Daney <david.daney@cavium.com> Signed-off-by:
-
Sudip Mukherjee authored
commit bab383de upstream. parport_find_base() will implicitly do parport_get_port() which increases the refcount. Then parport_register_device() will again increment the refcount. But while unloading the module we are only doing parport_unregister_device() decrementing the refcount only once. We add an parport_put_port() to neutralize the effect of parport_get_port(). Signed-off-by:
Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by:
-
Masahiro Yamada authored
commit 64526370 upstream. Currently, devres_get() passes devres_free() the pointer to devres, but devres_free() should be given with the pointer to resource data. Fixes: 9ac7849e ("devres: device resource management") Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Max Filippov authored
commit 77d6273e upstream. call12 can't be safely used as the first call in the inline function, because the compiler does not extend the stack frame of the bounding function accordingly, which may result in corruption of local variables. If a call needs to be done, do call8 first followed by call12. For pure assembly code in _switch_to increase stack frame size of the bounding function. Signed-off-by:
-
Max Filippov authored
commit 4229fb12 upstream. Userspace return code may skip restoring THREADPTR register if there are no registers that need to be zeroed. This leads to spurious failures in libc NPTL tests. Always restore THREADPTR on return to userspace. Signed-off-by:
-
Don Zickus authored
commit 3af4e5a9 upstream. It was reported that after 10-20 reboots, a usb keyboard plugged into a docking station would not work unless it was replugged in. Using usbmon, it turns out the interrupt URBs were streaming with callback errors of -71 for some reason. The hid-core.c::hid_io_error was supposed to retry and then reset, but the reset wasn't really happening. The check for HID_NO_BANDWIDTH was inverted. Fix was simple. Tested by reporter and locally by me by unplugging a keyboard halfway until I could recreate a stream of errors but no disconnect. Signed-off-by:
Don Zickus <dzickus@redhat.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Andrey Ryabinin authored
commit 71c6da84 upstream. Currently context size (cra_ctxsize) doesn't specified for ghash_async_alg. Which means it's zero. Thus crypto_create_tfm() doesn't allocate needed space for ghash_async_ctx, so any read/write to ctx (e.g. in ghash_async_init_tfm()) is not valid. Signed-off-by:
Andrey Ryabinin <aryabinin@odin.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Maciej S. Szmigiero authored
commit ffa34de0 upstream. SMSC IrCC SIR/FIR port should not be bound to by (legacy) serial driver so its own driver (smsc-ircc2) can bind to it. Signed-off-by:
Maciej Szmigiero <mail@maciej.szmigiero.name> Signed-off-by:
-
Peter Chen authored
commit 0521cfd0 upstream. The ehci platform device's drvdata is the pointer of struct usb_hcd already, so we doesn't need to call bus_to_hcd conversion again. Signed-off-by:
Peter Chen <peter.chen@freescale.com> Acked-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
Kishon Vijay Abraham I authored
commit b2fb5b1a upstream. DWC3 uses bounce buffer to handle non max packet aligned OUT transfers and the size of bounce buffer is 512 bytes. However if the host initiates OUT transfers of size more than 512 bytes (and non max packet aligned), the driver throws a WARN dump but still programs the TRB to receive more than 512 bytes. This will cause bounce buffer to overflow and corrupt the adjacent memory locations which can be fatal. Fix it by programming the TRB to receive a maximum of DWC3_EP0_BOUNCE_SIZE (512) bytes. Signed-off-by:
Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by:
Felipe Balbi <balbi@ti.com> Signed-off-by:
-
Matthijs Kooijman authored
commit 1fb8dc36 upstream. CustomWare uses the FTDI VID with custom PIDs for their ShipModul MiniPlex products. Signed-off-by:
Matthijs Kooijman <matthijs@stdin.nl> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Philipp Hachtmann authored
commit 951d3793 upstream. The driver used usb_get_serial_data(port->serial) which compiled but resulted in a NULL pointer being returned (and subsequently used). I did not go deeper into this but I guess this is a regression. Signed-off-by:
Philipp Hachtmann <hachti@hachti.de> Fixes: a85796ee ("USB: symbolserial: move private-data allocation to port_probe") Acked-by:
-
Bjorn Helgaas authored
commit d1541dc9 upstream. In fixup_ti816x_class(), we assigned "class = PCI_CLASS_MULTIMEDIA_VIDEO". But PCI_CLASS_MULTIMEDIA_VIDEO is only the two-byte base class/sub-class and needs to be shifted to make space for the low-order interface byte. Shift PCI_CLASS_MULTIMEDIA_VIDEO to set the correct class code. Fixes: 63c44080 ("PCI: Add quirk for setting valid class for TI816X Endpoint") Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> CC: Hemant Pedanekar <hemantp@ti.com> Signed-off-by:
-
Dan Carpenter authored
commit 3294bee8 upstream. The ">" should be ">=" or we end up reading beyond the end of the array. Fixes: 6e973d2c ('clk: vexpress: Add separate SP810 driver') Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Pawel Moll <pawel.moll@arm.com> Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org> Signed-off-by:
-
Lars-Peter Clausen authored
commit 7abad106 upstream. The different devices support by the adis16480 driver have slightly different scales for the gyroscope and accelerometer channels. Signed-off-by:
Lars-Peter Clausen <lars@metafoo.de> Signed-off-by:
Jonathan Cameron <jic23@kernel.org> Signed-off-by:
-
Lars-Peter Clausen authored
commit c689a923 upstream. Add inverse unit conversion macro to convert from standard IIO units to units that might be used by some devices. Those are useful in combination with scale factors that are specified as IIO_VAL_FRACTIONAL. Typically the denominator for those specifications will contain the maximum raw value the sensor will generate and the numerator the value it maps to in a specific unit. Sometimes datasheets specify those in different units than the standard IIO units (e.g. degree/s instead of rad/s) and so we need to do a unit conversion. From a mathematical point of view it does not make a difference whether we apply the unit conversion to the numerator or the inverse unit conversion to the denominator since (x / y) / z = x / (y * z). But as the denominator is typically a larger value and we are rounding both the numerator and denominator to integer values using the later method gives us a better precision (E.g. the relative error is smaller if we round 8000.3 to 8000 rather than rounding 8.3 to 8). This is where in inverse unit conversion macros will be used. Marked for stable as used by some upcoming fixes. Signed-off-by:
-
Markus Pargmann authored
commit 06d2f6ca upstream. This patch adds selects for IIO_BUFFER and IIO_TRIGGERED_BUFFER. Without IIO_BUFFER, the driver does not compile. Signed-off-by:
Markus Pargmann <mpa@pengutronix.de> Reviewed-by:
Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by:
-
Stephen Chandler Paul authored
commit 924f92bf upstream. Most of the time this isn't an issue since hotplugging an adaptor will trigger a crtc mode change which in turn, causes the driver to probe every DisplayPort for a dpcd. However, in cases where hotplugging doesn't cause a mode change (specifically when one unplugs a monitor from a DisplayPort connector, then plugs that same monitor back in seconds later on the same port without any other monitors connected), we never probe for the dpcd before starting the initial link training. What happens from there looks like this: - GPU has only one monitor connected. It's connected via DisplayPort, and does not go through an adaptor of any sort. - User unplugs DisplayPort connector from GPU. - Change in HPD is detected by the driver, we probe every DisplayPort for a possible connection. - Probe the port the user originally had the monitor connected on for it's dpcd. This fails, and we clear the first (and only the first) byte of the dpcd to indicate we no longer have a dpcd for this port. - User plugs the previously disconnected monitor back into the same DisplayPort. - radeon_connector_hotplug() is called before everyone else, and tries to handle the link training. Since only the first byte of the dpcd is zeroed, the driver is able to complete link training but does so against the wrong dpcd, causing it to initialize the link with the wrong settings. - Display stays blank (usually), dpcd is probed after the initial link training, and the driver prints no obvious messages to the log. In theory, since only one byte of the dpcd is chopped off (specifically, the byte that contains the revision information for DisplayPort), it's not entirely impossible that this bug may not show on certain monitors. For instance, the only reason this bug was visible on my ASUS PB238 monitor was due to the fact that this monitor using the enhanced framing symbol sequence, the flag for which is ignored if the radeon driver thinks that the DisplayPort version is below 1.1. Signed-off-by:
Stephen Chandler Paul <cpaul@redhat.com> Reviewed-by:
Jerome Glisse <jglisse@redhat.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
- 13 Sep, 2015 12 commits
-
-
Greg Kroah-Hartman authored
-
Yann Droneaud authored
commit d6c763af upstream. Since commit 8a0a9bd4 ('random: make get_random_int() more random'), get_random_int() returns a random value for each call, so comment and hack introduced in mmap_rnd() as part of commit 1d18c47c ('arm64: MMU fault handling and page table management') are incorrects. Commit 1d18c47c seems to use the same hack introduced by commit a5adc91a ('powerpc: Ensure random space between stack and mmaps'), latter copied in commit 5a0efea0 ('sparc64: Sharpen address space randomization calculations.'). But both architectures were cleaned up as part of commit fa8cbaaf ('powerpc+sparc64/mm: Remove hack in mmap randomize layout') as hack is no more needed since commit 8a0a9bd4. So the present patch removes the comment and the hack around get_random_int() on AArch64's mmap_rnd(). Cc: David S. Miller <davem@davemloft.net> Cc: Anton Blanchard <anton@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by:
Dan McGee <dpmcgee@gmail.com> Signed-off-by:
Yann Droneaud <ydroneaud@opteya.com> Signed-off-by:
-
Horia Geant? authored
commit b310c178 upstream. When doing pointer operation for accessing the HW S/G table, a value representing number of entries (and not number of bytes) must be used. Fixes: 045e3678 ("crypto: caam - ahash hmac support") Signed-off-by:
Horia Geant? <horia.geanta@freescale.com> Signed-off-by:
-
Bart Van Assche authored
commit 8f2777f5 upstream. Since fc_fcp_cleanup_cmd() can sleep this function must not be called while holding a spinlock. This patch avoids that fc_fcp_cleanup_each_cmd() triggers the following bug: BUG: scheduling while atomic: sg_reset/1512/0x00000202 1 lock held by sg_reset/1512: #0: (&(&fsp->scsi_pkt_lock)->rlock){+.-...}, at: [<ffffffffc0225cd5>] fc_fcp_cleanup_each_cmd.isra.21+0xa5/0x150 [libfc] Preemption disabled at:[<ffffffffc0225cd5>] fc_fcp_cleanup_each_cmd.isra.21+0xa5/0x150 [libfc] Call Trace: [<ffffffff816c612c>] dump_stack+0x4f/0x7b [<ffffffff810828bc>] __schedule_bug+0x6c/0xd0 [<ffffffff816c87aa>] __schedule+0x71a/0xa10 [<ffffffff816c8ad2>] schedule+0x32/0x80 [<ffffffffc0217eac>] fc_seq_set_resp+0xac/0x100 [libfc] [<ffffffffc0218b11>] fc_exch_done+0x41/0x60 [libfc] [<ffffffffc0225cff>] fc_fcp_cleanup_each_cmd.isra.21+0xcf/0x150 [libfc] [<ffffffffc0225f43>] fc_eh_device_reset+0x1c3/0x270 [libfc] [<ffffffff814a2cc9>] scsi_try_bus_device_reset+0x29/0x60 [<ffffffff814a3908>] scsi_ioctl_reset+0x258/0x2d0 [<ffffffff814a2650>] scsi_ioctl+0x150/0x440 [<ffffffff814b3a9d>] sd_ioctl+0xad/0x120 [<ffffffff8132f266>] blkdev_ioctl+0x1b6/0x810 [<ffffffff811da608>] block_ioctl+0x38/0x40 [<ffffffff811b4e08>] do_vfs_ioctl+0x2f8/0x530 [<ffffffff811b50c1>] SyS_ioctl+0x81/0xa0 [<ffffffff816cf8b2>] system_call_fastpath+0x16/0x7a Signed-off-by:
Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by:
Vasu Dev <vasu.dev@intel.com> Signed-off-by:
James Bottomley <JBottomley@Odin.com> Signed-off-by:
-
Alex Deucher authored
commit e037239e upstream. Signed-off-by:
-
Michael Walle authored
commit 5c16179b upstream. The commit de3910eb ("edac: change the mem allocation scheme to make Documentation/kobject.txt happy") changed the memory allocation for the csrows member. But ppc4xx_edac was forgotten in the patch. Fix it. Signed-off-by:
Michael Walle <michael@walle.cc> Cc: linux-edac <linux-edac@vger.kernel.org> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Link: http://lkml.kernel.org/r/1437469253-8611-1-git-send-email-michael@walle.ccSigned-off-by:
Borislav Petkov <bp@suse.de> Signed-off-by:
-
Richard Weinberger authored
commit c0ddc8c7 upstream. In kbuild it is allowed to define objects in files named "Makefile" and "Kbuild". Currently localmodconfig reads objects only from "Makefile"s and misses modules like nouveau. Link: http://lkml.kernel.org/r/1437948415-16290-1-git-send-email-richard@nod.atReported-and-tested-by:
Leonidas Spyropoulos <artafinde@gmail.com> Signed-off-by:
Richard Weinberger <richard@nod.at> Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
Joe Thornber authored
commit 7f518ad0 upstream. The device details and mapping trees were just being decremented before. Now btree_del() is called to do a deep delete. Signed-off-by:
Joe Thornber <ejt@redhat.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Peter Zijlstra authored
commit fed66e2c upstream. Vince reported that the fasync signal stuff doesn't work proper for inherited events. So fix that. Installing fasync allocates memory and sets filp->f_flags |= FASYNC, which upon the demise of the file descriptor ensures the allocation is freed and state is updated. Now for perf, we can have the events stick around for a while after the original FD is dead because of references from child events. So we cannot copy the fasync pointer around. We can however consistently use the parent's fasync, as that will be updated. Reported-and-Tested-by:
Vince Weaver <vincent.weaver@maine.edu> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho deMelo <acme@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: eranian@google.com Link: http://lkml.kernel.org/r/1434011521.1495.71.camel@twinsSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Wanpeng Li authored
commit 4f32be67 upstream. After trying to drain pages from pagevec/pageset, we try to get reference count of the page again, however, the reference count of the page is not reduced if the page is still not on LRU list. Fix it by adding the put_page() to drop the page reference which is from __get_any_page(). Signed-off-by:
Wanpeng Li <wanpeng.li@hotmail.com> Acked-by:
Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Manfred Spraul authored
commit 3ed1f8a9 upstream. sem_lock() did not properly pair memory barriers: !spin_is_locked() and spin_unlock_wait() are both only control barriers. The code needs an acquire barrier, otherwise the cpu might perform read operations before the lock test. As no primitive exists inside <include/spinlock.h> and since it seems noone wants another primitive, the code creates a local primitive within ipc/sem.c. With regards to -stable: The change of sem_wait_array() is a bugfix, the change to sem_lock() is a nop (just a preprocessor redefinition to improve the readability). The bugfix is necessary for all kernels that use sem_wait_array() (i.e.: starting from 3.10). Signed-off-by:
Manfred Spraul <manfred@colorfullife.com> Reported-by:
Oleg Nesterov <oleg@redhat.com> Acked-by:
-
Herton R. Krzesinski authored
commit 602b8593 upstream. The current semaphore code allows a potential use after free: in exit_sem we may free the task's sem_undo_list while there is still another task looping through the same semaphore set and cleaning the sem_undo list at freeary function (the task called IPC_RMID for the same semaphore set). For example, with a test program [1] running which keeps forking a lot of processes (which then do a semop call with SEM_UNDO flag), and with the parent right after removing the semaphore set with IPC_RMID, and a kernel built with CONFIG_SLAB, CONFIG_SLAB_DEBUG and CONFIG_DEBUG_SPINLOCK, you can easily see something like the following in the kernel log: Slab corruption (Not tainted): kmalloc-64 start=ffff88003b45c1c0, len=64 000: 6b 6b 6b 6b 6b 6b 6b 6b 00 6b 6b 6b 6b 6b 6b 6b kkkkkkkk.kkkkkkk 010: ff ff ff ff 6b 6b 6b 6b ff ff ff ff ff ff ff ff ....kkkk........ Prev obj: start=ffff88003b45c180, len=64 000: 00 00 00 00 ad 4e ad de ff ff ff ff 5a 5a 5a 5a .....N......ZZZZ 010: ff ff ff ff ff ff ff ff c0 fb 01 37 00 88 ff ff ...........7.... Next obj: start=ffff88003b45c200, len=64 000: 00 00 00 00 ad 4e ad de ff ff ff ff 5a 5a 5a 5a .....N......ZZZZ 010: ff ff ff ff ff ff ff ff 68 29 a7 3c 00 88 ff ff ........h).<.... BUG: spinlock wrong CPU on CPU#2, test/18028 general protection fault: 0000 [#1] SMP Modules linked in: 8021q mrp garp stp llc nf_conntrack_ipv4 nf_defrag_ipv4 ip6t_REJECT nf_reject_ipv6 nf_conntrack_ipv6 nf_defrag_ipv6 xt_state nf_conntrack ip6table_filter ip6_tables binfmt_misc ppdev input_leds joydev parport_pc parport floppy serio_raw virtio_balloon virtio_rng virtio_console virtio_net iosf_mbi crct10dif_pclmul crc32_pclmul ghash_clmulni_intel pcspkr qxl ttm drm_kms_helper drm snd_hda_codec_generic i2c_piix4 snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep snd_seq snd_seq_device snd_pcm snd_timer snd soundcore crc32c_intel virtio_pci virtio_ring virtio pata_acpi ata_generic [last unloaded: speedstep_lib] CPU: 2 PID: 18028 Comm: test Not tainted 4.2.0-rc5+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.8.1-20150318_183358- 04/01/2014 RIP: spin_dump+0x53/0xc0 Call Trace: spin_bug+0x30/0x40 do_raw_spin_unlock+0x71/0xa0 _raw_spin_unlock+0xe/0x10 freeary+0x82/0x2a0 ? _raw_spin_lock+0xe/0x10 semctl_down.clone.0+0xce/0x160 ? __do_page_fault+0x19a/0x430 ? __audit_syscall_entry+0xa8/0x100 SyS_semctl+0x236/0x2c0 ? syscall_trace_leave+0xde/0x130 entry_SYSCALL_64_fastpath+0x12/0x71 Code: 8b 80 88 03 00 00 48 8d 88 60 05 00 00 48 c7 c7 a0 2c a4 81 31 c0 65 8b 15 eb 40 f3 7e e8 08 31 68 00 4d 85 e4 44 8b 4b 08 74 5e <45> 8b 84 24 88 03 00 00 49 8d 8c 24 60 05 00 00 8b 53 04 48 89 RIP [<ffffffff810d6053>] spin_dump+0x53/0xc0 RSP <ffff88003750fd68> ---[ end trace 783ebb76612867a0 ]--- NMI watchdog: BUG: soft lockup - CPU#3 stuck for 22s! [test:18053] Modules linked in: 8021q mrp garp stp llc nf_conntrack_ipv4 nf_defrag_ipv4 ip6t_REJECT nf_reject_ipv6 nf_conntrack_ipv6 nf_defrag_ipv6 xt_state nf_conntrack ip6table_filter ip6_tables binfmt_misc ppdev input_leds joydev parport_pc parport floppy serio_raw virtio_balloon virtio_rng virtio_console virtio_net iosf_mbi crct10dif_pclmul crc32_pclmul ghash_clmulni_intel pcspkr qxl ttm drm_kms_helper drm snd_hda_codec_generic i2c_piix4 snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep snd_seq snd_seq_device snd_pcm snd_timer snd soundcore crc32c_intel virtio_pci virtio_ring virtio pata_acpi ata_generic [last unloaded: speedstep_lib] CPU: 3 PID: 18053 Comm: test Tainted: G D 4.2.0-rc5+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.8.1-20150318_183358- 04/01/2014 RIP: native_read_tsc+0x0/0x20 Call Trace: ? delay_tsc+0x40/0x70 __delay+0xf/0x20 do_raw_spin_lock+0x96/0x140 _raw_spin_lock+0xe/0x10 sem_lock_and_putref+0x11/0x70 SYSC_semtimedop+0x7bf/0x960 ? handle_mm_fault+0xbf6/0x1880 ? dequeue_task_fair+0x79/0x4a0 ? __do_page_fault+0x19a/0x430 ? kfree_debugcheck+0x16/0x40 ? __do_page_fault+0x19a/0x430 ? __audit_syscall_entry+0xa8/0x100 ? do_audit_syscall_entry+0x66/0x70 ? syscall_trace_enter_phase1+0x139/0x160 SyS_semtimedop+0xe/0x10 SyS_semop+0x10/0x20 entry_SYSCALL_64_fastpath+0x12/0x71 Code: 47 10 83 e8 01 85 c0 89 47 10 75 08 65 48 89 3d 1f 74 ff 7e c9 c3 0f 1f 44 00 00 55 48 89 e5 e8 87 17 04 00 66 90 c9 c3 0f 1f 00 <55> 48 89 e5 0f 31 89 c1 48 89 d0 48 c1 e0 20 89 c9 48 09 c8 c9 Kernel panic - not syncing: softlockup: hung tasks I wasn't able to trigger any badness on a recent kernel without the proper config debugs enabled, however I have softlockup reports on some kernel versions, in the semaphore code, which are similar as above (the scenario is seen on some servers running IBM DB2 which uses semaphore syscalls). The patch here fixes the race against freeary, by acquiring or waiting on the sem_undo_list lock as necessary (exit_sem can race with freeary, while freeary sets un->semid to -1 and removes the same sem_undo from list_proc or when it removes the last sem_undo). After the patch I'm unable to reproduce the problem using the test case [1]. [1] Test case used below: #include <stdio.h> #include <sys/types.h> #include <sys/ipc.h> #include <sys/sem.h> #include <sys/wait.h> #include <stdlib.h> #include <time.h> #include <unistd.h> #include <errno.h> #define NSEM 1 #define NSET 5 int sid[NSET]; void thread() { struct sembuf op; int s; uid_t pid = getuid(); s = rand() % NSET; op.sem_num = pid % NSEM; op.sem_op = 1; op.sem_flg = SEM_UNDO; semop(sid[s], &op, 1); exit(EXIT_SUCCESS); } void create_set() { int i, j; pid_t p; union { int val; struct semid_ds *buf; unsigned short int *array; struct seminfo *__buf; } un; /* Create and initialize semaphore set */ for (i = 0; i < NSET; i++) { sid[i] = semget(IPC_PRIVATE , NSEM, 0644 | IPC_CREAT); if (sid[i] < 0) { perror("semget"); exit(EXIT_FAILURE); } } un.val = 0; for (i = 0; i < NSET; i++) { for (j = 0; j < NSEM; j++) { if (semctl(sid[i], j, SETVAL, un) < 0) perror("semctl"); } } /* Launch threads that operate on semaphore set */ for (i = 0; i < NSEM * NSET * NSET; i++) { p = fork(); if (p < 0) perror("fork"); if (p == 0) thread(); } /* Free semaphore set */ for (i = 0; i < NSET; i++) { if (semctl(sid[i], NSEM, IPC_RMID)) perror("IPC_RMID"); } /* Wait for forked processes to exit */ while (wait(NULL)) { if (errno == ECHILD) break; }; } int main(int argc, char **argv) { pid_t p; srand(time(NULL)); while (1) { p = fork(); if (p < 0) { perror("fork"); exit(EXIT_FAILURE); } if (p == 0) { create_set(); goto end; } /* Wait for forked processes to exit */ while (wait(NULL)) { if (errno == ECHILD) break; }; } end: return 0; } [akpm@linux-foundation.org: use normal comment layout] Signed-off-by:
Herton R. Krzesinski <herton@redhat.com> Acked-by:
-
- 17 Aug, 2015 1 commit
-
-
Greg Kroah-Hartman authored
-
