* 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
  MAINTAINERS: List i2c-omap and i2c-davinci drivers
  MAINTAINERS: i2c: Add third maintainer
  i2c/gpio-i2cmux: Convert to use module_platform_driver()
  i2c/busses: Use module_platform_driver()
  i2c-dev: Use memdup_user
  i2c: Convert to DEFINE_PCI_DEVICE_TABLE
  i2c-ali1535: enable SPARC support
  i2c: Fix error value returned by several bus drivers

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  dma-buf: Documentation update for Kconfig select
  nouveau: Support Optimus models for vga_switcheroo
  nouveau: properly check for _DSM function support
  dma-buf: drop option text so users don't select it.
  radeon: Call pci_clear_master() instead of open-coding it.
  gma500: Discard modes that don't fit in stolen memory
  drm: bump DRM_CONNECTOR_MAX_ENCODER from 2 to 3
  drm/radeon/kms: Fix module parameter description format
  drm/radeon/kms/ni: fix packet2 handling for VM IB parser
  ttm/dma: Remove the WARN() which is not useful.

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (59 commits)
  rtc: max8925: Add function to work as wakeup source
  mfd: Add pm ops to max8925
  mfd: Convert aat2870 to dev_pm_ops
  mfd: Still check other interrupts if we get a wm831x touchscreen IRQ
  mfd: Introduce missing kfree in 88pm860x probe routine
  mfd: Add S5M series configuration
  mfd: Add s5m series irq driver
  mfd: Add S5M core driver
  mfd: Improve mc13xxx dt binding document
  mfd: Fix stmpe section mismatch
  mfd: Fix stmpe build warning
  mfd: Fix STMPE I2c build failure
  mfd: Constify aat2870-core i2c_device_id table
  gpio: Add support for stmpe variant 801
  mfd: Add support for stmpe variant 801
  mfd: Add support for stmpe variant 610
  mfd: Add support for STMPE SPI interface
  mfd: Separate out STMPE controller and interface specific code
  misc: Remove max8997-muic sysfs attributes
  mfd: Remove unused wm831x_irq_data_to_mask_reg()
  ...

Fix up trivial conflict in drivers/leds/Kconfig due to addition of
LEDS_MAX8997 and LEDS_TCA6507 next to each other.

MMC highlights for 3.3:

Core:
 * Support for the HS200 high-speed eMMC mode.
 * Support SDIO 3.0 Ultra High Speed cards.
 * Kill pending block requests immediately if card is removed.
 * Enable the eMMC feature for locking boot partitions read-only
   until next power on, exposed via sysfs.

Drivers:
 * Runtime PM support for Intel Medfield SDIO.
 * Suspend/resume support for sdhci-spear.
 * sh-mmcif now processes requests asynchronously.

* tag 'mmc-merge-for-3.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (58 commits)
  mmc: fix a deadlock between system suspend and MMC block IO
  mmc: sdhci: restore the enabled dma when do reset all
  mmc: dw_mmc: miscaculated the fifo-depth with wrong bit operation
  mmc: host: Adds support for eMMC 4.5 HS200 mode
  mmc: core: HS200 mode support for eMMC 4.5
  mmc: dw_mmc: fixed wrong bit operation for SDMMC_GET_FCNT()
  mmc: core: Separate the timeout value for cache-ctrl
  mmc: sdhci-spear: Fix compilation error
  mmc: sdhci: Deal with failure case in sdhci_suspend_host
  mmc: dw_mmc: Clear the DDR mode for non-DDR
  mmc: sd: Fix SDR12 timing regression
  mmc: sdhci: Fix tuning timer incorrect setting when suspending host
  mmc: core: Add option to prevent eMMC sleep command
  mmc: omap_hsmmc: use threaded irq handler for card-detect.
  mmc: sdhci-pci: enable runtime PM for Medfield SDIO
  mmc: sdhci: Always pass clock request value zero to set_clock host op
  mmc: sdhci-pci: remove SDHCI_QUIRK2_OWN_CARD_DETECTION
  mmc: sdhci-pci: get gpio numbers from platform data
  mmc: sdhci-pci: add platform data
  mmc: sdhci: prevent card detection activity for non-removable cards
  ...

* 'wire-accept4' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux:
  ia64: Add accept4() syscall

Since commit 080d676d ("aio: allocate kiocbs in batches") iocbs are
allocated in a batch during processing of first iocbs.  All iocbs in a
batch are automatically added to ctx->active_reqs list and accounted in
ctx->reqs_active.

If one (not the last one) of iocbs submitted by an user fails, further
iocbs are not processed, but they are still present in ctx->active_reqs
and accounted in ctx->reqs_active.  This causes process to stuck in a D
state in wait_for_all_aios() on exit since ctx->reqs_active will never
go down to zero.  Furthermore since kiocb_batch_free() frees iocb
without removing it from active_reqs list the list become corrupted
which may cause oops.

Fix this by removing iocb from ctx->active_reqs and updating
ctx->reqs_active in kiocb_batch_free().
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Cc: stable@kernel.org   # 3.2
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit 8a25a2fd ("cpu: convert 'cpu' and 'machinecheck' sysdev_class
to a regular subsystem") changed how things are dealt with in the MCE
subsystem.  Some of the things that got broken due to this are CPU
hotplug and suspend/hibernate.

MCE uses per_cpu allocations of struct device.  So, when a CPU goes
offline and comes back online, in order to ensure that we start from a
clean slate with respect to the MCE subsystem, zero out the entire
per_cpu device structure to 0 before using it.
Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/pkl/squashfs-next:
  Squashfs: fix i_blocks calculation with extended regular files
  Squashfs: fix mount time sanity check for corrupted superblock
  Squashfs: optimise squashfs_cache_get entry search
  Squashfs: Update documentation to include xattrs
  Squashfs: add missing block release on error condition

* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-nmw:
  GFS2: Fix nlink setting on inode creation
  GFS2: fail mount if journal recovery fails
  GFS2: let spectator mount do read only recovery
  GFS2: Fix a use-after-free that coverity spotted
  GFS2: dlm based recovery coordination

* 'linux-next' of git://git.infradead.org/ubifs-2.6:
  UBIFS: fix key printing
  UBIFS: use snprintf instead of sprintf when printing keys
  UBIFS: fix debugging messages
  UBIFS: make debugging messages light again
  UBI: fix debugging messages
  UBI: make vid_hdr non-static

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
  ceph: ensure prealloc_blob is in place when removing xattr
  rbd: initialize snap_rwsem in rbd_add()
  ceph: enable/disable dentry complete flags via mount option
  vfs: export symbol d_find_any_alias()
  ceph: always initialize the dentry in open_root_dentry()
  libceph: remove useless return value for osd_client __send_request()
  ceph: avoid iput() while holding spinlock in ceph_dir_fsync
  ceph: avoid useless dget/dput in encode_fh
  ceph: dereference pointer after checking for NULL
  crush: fix force for non-root TAKE
  ceph: remove unnecessary d_fsdata conditional checks
  ceph: Use kmemdup rather than duplicating its implementation

Fix up conflicts in fs/ceph/super.c (d_alloc_root() failure handling vs
always initialize the dentry in open_root_dentry)

I don't know how I missed this obvious mistake when I
reviewed Als' patches, sorry.

[ Quoting Al:

	Grr...  Note to self: do git status *and* git stash show -p
	before git push.  Nothing like "WTF? I'd fixed that braino"
	feeling ;-/

  Al sent the same patch - it got broken in commit d668dc56:
  "autofs4: deal with autofs4_write/autofs4_write races". ]
Reported-and-tested-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Before commit 56e46742 we have had locking
around all printing macros and we could use static buffers for creating
key strings and printing them. However, now we do not have that locking and
we cannot use static buffers. This commit removes the old DBGKEY() macros
and introduces few new helper macros for printing debugging messages plus
a key at the end. Thankfully, all the messages are already structures in
a way that the key is printed in the end.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>

Switch to 'snprintf()' which is more secure and reliable. This is also a
preparation to the subsequent key printing fixes.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>

As per Linus' comment, dma-buf Kconfig entry shouldn't have an option
text, but should be selected by the subsystems that use it.

Add this information in the documentation as well.
Signed-off-by: Sumit Semwal <sumit.semwal@ti.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Newer nVidia cards with Optimus do not support/use the DSM switching functions.
Instead, it require a DSM function to be called prior to bringing a device into
D3 state. No other _DSM calls are necessary before/after enabling/disabling a
device. Switching between discrete and integrated GPU is not supported by
this Optimus _DSM call, therefore return on the switching method.
Signed-off-by: Peter Lekensteyn <lekensteyn@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

According to the ACPI spec version 4, section 9.14.1, _DSM functions
must return a value with the first bit enabled if any DSM functions are
supported for the given UUID and revision ID. For a given function index n
to be marked supported, bit n must be enabled.
Signed-off-by: Peter Lekensteyn <lekensteyn@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

This is going to be used by other subsystems so they should select it.
Signed-off-by: Dave Airlie <airlied@redhat.com>

Reported-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

[This fixes a crash on boot if the system is plugged into an HDTV so it's
 probably appropriate to push even though it didn't make the window. We could
 be cleverer about this but the simple version seems to be the safe one]

From: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>

At the moment we cannot allocate more than stolen memory size for framebuffers.
To get around that issues we discard modes that doesn't fit. This is a temporary
solution until we can freely allocate framebuffer memory.

[Currently the framebuffer needs to be linear in kernel space due to limits
 in the kernel fb layer - AC]
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

There exists at least one NVIDIA GPU (Quadro NVS 300) that has a DMS-59
connector which is capable of supporting DisplayPort, TMDS and VGA on
a single connector.

We need to bump the allowed encoder limit to support all three configs.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Module parameter descriptions don't take a trailing \n, otherwise it
breaks formatting of modinfo's output. Also add missing space after
comma.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: David Airlie <airlied@linux.ie>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Packet2 is only one dword.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

. It was useful during development, but now on a production system
we can get this (if the user forgot to upload the firmware):

[drm] radeon: irq initialized.
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] radeon: ib pool ready.
[drm] Loading SUMO Microcode
r600_cp: Failed to load firmware "radeon/SUMO_pfp.bin"
atl1c 0000:03:00.0: version 1.0.1.0-NAPI.213057] [drm:evergreen_startup] *ERROR* Failed to load firmware!
radeon 0000:00:01.0: disabling GPU acceleration
88] radeon 0000:00:01.0: ffff8801bb782400 unpin not necessary
------------[ cut here ]------------
WARNING: at /home/konrad/linux-linus/drivers/gpu/drm/ttm/ttm_page_alloc_dma.c:956 ttm_dma_unpopulate+0x79/0x300 [ttm]()
Hardware name: System Product Name
Modules linked in: e1000e atl1c radeon(+) ahci libahci libata scsi_mod fbcon tileblit font ttm bitblit softcursor drm_kms_helper wmi xen_blkfront xen_netfront fb_sys_fops sysimgblt sysfillrect syscopyarea xenfs xen_privcmd
Pid: 1600, comm: modprobe Not tainted 3.2.0-06100-ge343a895 #1
Call Trace:
 [<ffffffff8108973a>] warn_slowpath_common+0x7a/0xb0
 [<ffffffff81089785>] warn_slowpath_null+0x15/0x20
 [<ffffffffa0060309>] ttm_dma_unpopulate+0x79/0x300 [ttm]
 [<ffffffffa01341c0>] radeon_ttm_tt_unpopulate+0x120/0x130 [radeon]
 [<ffffffffa0056e0c>] ttm_tt_destroy+0x2c/0x70 [ttm]
 [<ffffffffa0057a4e>] ttm_bo_cleanup_memtype_use+0x3e/0x80 [ttm]
 [<ffffffffa00595a1>] ttm_bo_release+0x251/0x280 [ttm]
 [<ffffffffa0059610>] ttm_bo_unref+0x40/0x60 [ttm]
 [<ffffffffa0134d02>] radeon_bo_unref+0x42/0x80 [radeon]
 [<ffffffffa0186dfb>] radeon_sa_bo_manager_fini+0x6b/0x80 [radeon]
 [<ffffffffa0146b8f>] radeon_ib_pool_fini+0x6f/0x90 [radeon]
 [<ffffffffa014be49>] r100_ib_fini+0x19/0x20 [radeon]
 [<ffffffffa017b47e>] evergreen_init+0x1ee/0x2d0 [radeon]

The big WARN() has nothing to do with the culprit - which is that
the firmware was not loaded. So lets remove the WARN() from the TTM DMA code.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Andrew explains:

 - various misc stuff

 - Most of the rest of MM: memcg, threaded hugepages, others.

 - cpumask

 - kexec

 - kdump

 - some direct-io performance tweaking

 - radix-tree optimisations

 - new selftests code

   A note on this: often people will develop a new userspace-visible
   feature and will develop userspace code to exercise/test that
   feature.  Then they merge the patch and the selftest code dies.
   Sometimes we paste it into the changelog.  Sometimes the code gets
   thrown into Documentation/(!).

   This saddens me.  So this patch creates a bare-bones framework which
   will henceforth allow me to ask people to include their test apps in
   the kernel tree so we can keep them alive.  Then when people enhance
   or fix the feature, I can ask them to update the test app too.

   The infrastruture is terribly trivial at present - let's see how it
   evolves.

 - checkpoint/restart feature work.

   A note on this: this is a project by various mad Russians to perform
   c/r mainly from userspace, with various oddball helper code added
   into the kernel where the need is demonstrated.

   So rather than some large central lump of code, what we have is
   little bits and pieces popping up in various places which either
   expose something new or which permit something which is normally
   kernel-private to be modified.

   The overall project is an ongoing thing.  I've judged that the size
   and scope of the thing means that we're more likely to be successful
   with it if we integrate the support into mainline piecemeal rather
   than allowing it all to develop out-of-tree.

   However I'm less confident than the developers that it will all
   eventually work! So what I'm asking them to do is to wrap each piece
   of new code inside CONFIG_CHECKPOINT_RESTORE.  So if it all
   eventually comes to tears and the project as a whole fails, it should
   be a simple matter to go through and delete all trace of it.

This lot pretty much wraps up the -rc1 merge for me.

* akpm: (96 commits)
  unlzo: fix input buffer free
  ramoops: update parameters only after successful init
  ramoops: fix use of rounddown_pow_of_two()
  c/r: prctl: add PR_SET_MM codes to set up mm_struct entries
  c/r: procfs: add start_data, end_data, start_brk members to /proc/$pid/stat v4
  c/r: introduce CHECKPOINT_RESTORE symbol
  selftests: new x86 breakpoints selftest
  selftests: new very basic kernel selftests directory
  radix_tree: take radix_tree_path off stack
  radix_tree: remove radix_tree_indirect_to_ptr()
  dio: optimize cache misses in the submission path
  vfs: cache request_queue in struct block_device
  fs/direct-io.c: calculate fs_count correctly in get_more_blocks()
  drivers/parport/parport_pc.c: fix warnings
  panic: don't print redundant backtraces on oops
  sysctl: add the kernel.ns_last_pid control
  kdump: add udev events for memory online/offline
  include/linux/crash_dump.h needs elf.h
  kdump: fix crash_kexec()/smp_send_stop() race in panic()
  kdump: crashk_res init check for /sys/kernel/kexec_crash_size
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (69 commits)
  pptp: Accept packet with seq zero
  RDS: Remove some unused iWARP code
  net: fsl: fec: handle 10Mbps speed in RMII mode
  drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c: add missing iounmap
  drivers/net/ethernet/tundra/tsi108_eth.c: add missing iounmap
  ksz884x: fix mtu for VLAN
  net_sched: sfq: add optional RED on top of SFQ
  dp83640: Fix NOHZ local_softirq_pending 08 warning
  gianfar: Fix invalid TX frames returned on error queue when time stamping
  gianfar: Fix missing sock reference when processing TX time stamps
  phylib: introduce mdiobus_alloc_size()
  net: decrement memcg jump label when limit, not usage, is changed
  net: reintroduce missing rcu_assign_pointer() calls
  inet_diag: Rename inet_diag_req_compat into inet_diag_req
  inet_diag: Rename inet_diag_req into inet_diag_req_v2
  bond_alb: don't disable softirq under bond_alb_xmit
  mac80211: fix rx->key NULL pointer dereference in promiscuous mode
  nl80211: fix old station flags compatibility
  mdio-octeon: use an unique MDIO bus name.
  mdio-gpio: use an unique MDIO bus name.
  ...

unlzo modifies the pointer to in_buf, so we have to free the original
buffer, not the modified pointer.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Lasse Collin <lasse.collin@tukaani.org>
Cc: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

If a platform device exists on the system, but ramoops fails to attach to
it, the module parameters are overridden before ramoops can fall back and
try to use passed module parameters.  Move update to end of init routine.
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Marco Stornelli <marco.stornelli@gmail.com>
Cc: Sergiu Iordache <sergiu@chromium.org>
Cc: Seiji Aguchi <seiji.aguchi@hds.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The return value of rounddown_pow_of_two wasn't evaluated, so the
operation was a no-op.
Signed-off-by: Marco Stornelli <marco.stornelli@gmail.com>
Reported-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: WANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

When we restore a task we need to set up text, data and data heap sizes
from userspace to the values a task had at checkpoint time.  This patch
adds auxilary prctl codes for that.

While most of them have a statistical nature (their values are involved
into calculation of /proc/<pid>/statm output) the start_brk and brk values
are used to compute an allowed size of program data segment expansion.
Which means an arbitrary changes of this values might be dangerous
operation.  So to restrict access the following requirements applied to
prctl calls:

 - The process has to have CAP_SYS_ADMIN capability granted.
 - For all opcodes except start_brk/brk members an appropriate
   VMA area must exist and should fit certain VMA flags,
   such as:
   - code segment must be executable but not writable;
   - data segment must not be executable.

start_brk/brk values must not intersect with data segment and must not
exceed RLIMIT_DATA resource limit.

Still the main guard is CAP_SYS_ADMIN capability check.

Note the kernel should be compiled with CONFIG_CHECKPOINT_RESTORE support
otherwise these prctl calls will return -EINVAL.

[akpm@linux-foundation.org: cache current->mm in a local, saving 200 bytes text]
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Andrew Vagin <avagin@openvz.org>
Cc: Serge Hallyn <serge.hallyn@canonical.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Vasiliy Kulikov <segoon@openwall.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The mm->start_code/end_code, mm->start_data/end_data, mm->start_brk are
involved into calculation of program text/data segment sizes (which might
be seen in /proc/<pid>/statm) and into brk() call final address.

For restore we need to know all these values.  While
mm->start_code/end_code already present in /proc/$pid/stat, the rest
members are not, so this patch brings them in.

The restore procedure of these members is addressed in another patch using
prctl().
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Andrew Vagin <avagin@openvz.org>
Cc: Vasiliy Kulikov <segoon@openwall.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

For checkpoint/restore we need auxilary features being compiled into the
kernel, such as additional prctl codes, /proc/<pid>/map_files and etc...
but same time these features are not mandatory for a regular kernel so
CHECKPOINT_RESTORE config symbol should bring a way to disable them all at
once if one wish to get rid of additional functionality.
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Andrew Vagin <avagin@openvz.org>
Cc: Serge Hallyn <serge.hallyn@canonical.com>
Cc: Vasiliy Kulikov <segoon@openwall.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Bring a first selftest in the relevant directory.  This tests several
combinations of breakpoints and watchpoints in x86, as well as icebp traps
and int3 traps.  Given the amount of breakpoint regressions we raised
after we merged the generic breakpoint infrastructure, such selftest
became necessary and can still serve today as a basis for new patches that
touch the do_debug() path.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Bring a new kernel selftests directory in tools/testing/selftests.  To
add a new selftest, create a subdirectory with the sources and a
makefile that creates a target named "run_test" then add the
subdirectory name to the TARGET var in tools/testing/selftests/Makefile
and tools/testing/selftests/run_tests script.

This can help centralizing and maintaining any useful selftest that
developers usually tend to let rust in peace on some random server.
Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Down, down in the deepest depths of GFP_NOIO page reclaim, we have
shrink_page_list() calling __remove_mapping() calling __delete_from_
swap_cache() or __delete_from_page_cache().

You would not expect those to need much stack, but in fact they call
radix_tree_delete(): which declares a 192-byte radix_tree_path array on
its stack (to record the node,offsets it visits when descending, in case
it needs to ascend to update them).  And if any tag is still set [1],
that calls radix_tree_tag_clear(), which declares a further such
192-byte radix_tree_path array on the stack.  (At least we have
interrupts disabled here, so won't then be pushing registers too.)

That was probably a good choice when most users were 32-bit (array of
half the size), and adding fields to radix_tree_node would have bloated
it unnecessarily.  But nowadays many are 64-bit, and each
radix_tree_node contains a struct rcu_head, which is only used when
freeing; whereas the radix_tree_path info is only used for updating the
tree (deleting, clearing tags or setting tags if tagged) when a lock
must be held, of no interest when accessing the tree locklessly.

So add a parent pointer to the radix_tree_node, in union with the
rcu_head, and remove all uses of the radix_tree_path.  There would be
space in that union to save the offset when descending as before (we can
argue that a lock must already be held to exclude other users), but
recalculating it when ascending is both easy (a constant shift and a
constant mask) and uncommon, so it seems better just to do that.

Two little optimizations: no need to decrement height when descending,
adjusting shift is enough; and once radix_tree_tag_if_tagged() has set
tag on a node and its ancestors, it need not ascend from that node
again.

perf on the radix tree test harness reports radix_tree_insert() as 2%
slower (now having to set parent), but radix_tree_delete() 24% faster.
Surely that's an exaggeration from rtth's artificially low map shift 3,
but forcing it back to 6 still rates radix_tree_delete() 8% faster.

[1] Can a pagecache tag (dirty, writeback or towrite) actually still be
set at the time of radix_tree_delete()? Perhaps not if the filesystem is
well-behaved.  But although I've not tracked any stack overflow down to
this cause, I have observed a curious case in which a dirty tag is set
and left set on tmpfs: page migration's migrate_page_copy() happens to
use __set_page_dirty_nobuffers() to set PageDirty on the newpage, and
that sets PAGECACHE_TAG_DIRTY as a side-effect - harmless to a
filesystem which doesn't use tags, except for this stack depth issue.
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Nai Xia <nai.xia@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

It is not used anymore, remove it
Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Acked-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Some investigation of a transaction processing workload showed that a
major consumer of cycles in __blockdev_direct_IO is the cache miss while
accessing the block size.  This is because it has to walk the chain from
block_dev to gendisk to queue.

The block size is needed early on to check alignment and sizes.  It's only
done if the check for the inode block size fails.  But the costly block
device state is unconditionally fetched.

- Reorganize the code to only fetch block dev state when actually
  needed.

Then do a prefetch on the block dev early on in the direct IO path.  This
is worth it, because there is substantial code run before we actually
touch the block dev now.

- I also added some unlikelies to make it clear the compiler that block
  device fetch code is not normally executed.

This gave a small, but measurable improvement on a large database
benchmark (about 0.3%)

[akpm@linux-foundation.org: coding-style fixes]
[sfr@canb.auug.org.au: using prefetch requires including prefetch.h]
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This makes it possible to get from the inode to the request_queue with one
less cache miss.  Used in followon optimization.

The livetime of the pointer is the same as the gendisk.

This assumes that the queue will always stay the same in the gendisk while
it's visible to block_devices.  I think that's safe correct?
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jeff Moyer <jmoyer@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

In get_more_blocks(), we use dio_count to calcuate fs_count and do some
tricky things to increase fs_count if dio_count isn't aligned.  But
actually it still has some corner cases that can't be coverd.  See the
following example:

	dio_write foo -s 1024 -w 4096

(direct write 4096 bytes at offset 1024).  The same goes if the offset
isn't aligned to fs_blocksize.

In this case, the old calculation counts fs_count to be 1, but actually we
will write into 2 different blocks (if fs_blocksize=4096).  The old code
just works, since it will call get_block twice (and may have to allocate
and create extents twice for filesystems like ext4).  So we'd better call
get_block just once with the proper fs_count.
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/parport/parport_pc.c: In function '__check_irq':
drivers/parport/parport_pc.c:3415: warning: return from incompatible pointer type
drivers/parport/parport_pc.c: In function '__check_dma':
drivers/parport/parport_pc.c:3417: warning: return from incompatible pointer type
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>