- 26 Jun, 2006 34 commits
-
-
Hannes Reinecke authored
Even with the latest fixes aic79xx still occasionally triggers the BUG_ON in slave_destroy. Rather than trying to figure out the various levels of interaction here I've decided to remove the callback altogether. The primary reason for the slave_alloc / slave_destroy is to keep an index of pointers to the sdevs associated with a given target. However, by changing the arguments to the affected functions slightly it's possible to avoid the use of that index entirely. The only performance penalty we'll incur is in writing the information for /proc/scsi/XXX, as we'll have to recurse over all available sdevs to find the correct ones. But I doubt that reading from /proc is in any way time-critical. Signed-off-by:
Hannes Reinecke <hare@suse.de> Signed-off-by:
James Bottomley <James.Bottomley@SteelEye.com>
-
Hannes Reinecke authored
According to Anthony Cheung all HP XP arrays with "OPEN-" types support REPORT_LUN. So there is no reason why we shouldn't use it. Signed-off-by:
Anthony Cheung <anthony.cheung@hp.com> Signed-off-by:
-
Sumant Patro authored
The patch adds support for a ZCR controller (Device ID : 0x413). It also has a critical bug fix : Disable controller interrupt before firing INIT cmd to FW. Interrupt is enabled after required initialization is over. This is done to ensure that driver is ready to handle interrupts when it is generated by the controller. Signed-off-by:
Sumant Patro <Sumant.Patro@lsil.com> Signed-off-by:
-
Dave C Boutcher authored
This patch fixes a condition where ibmvscsi treats a transport error as a "busy" condition, so no errors were returned to the scsi mid-layer. In a RAID environment this means that I/O hung rather than failing over. Signed-off-by: -
Douglas Gilbert authored
- add 'virtual_gb' parameter to simulate large storage (by wrapping in dev_size_mb megabytes of actual ram) - add 'no_lun_0' parameter to skip lun 0 on each target (but still respond as required to INQUIRY + REPORT LUNS) - add well know lu support - add MODE SELECT commands support [pages: 0xa and 0x1c] - add LOG SENSE command support [pages: 0xd and 0x2f] - add READ CAPACITY (16) support - increase number of mode pages supported (to read), mainly transport specific (SAS) mode (sub)pages - add more VPD pages and extend others, including ATA information VPD page - START STOP UNIT now maintains a state machine - READ (16) and WRITE (16) cope with lbas larger than 32 bits (needed for the 'virtual_gb' parameter) - allow single command transfers up to 32 MB - more precise error (sense data) messages Signed-off-by:Douglas Gilbert <dougg@torque.net> Signed-off-by:
-
Dave Jones authored
On Wed, Jun 21, 2006 at 07:00:34PM +0000, Linux Kernel wrote: > commit 67d59dfd > tree ae85703651d81740f4a6cd398f9dd4d6aabe6a2f > parent 6db874fb > author James Bottomley <James.Bottomley@steeleye.com> Wed, 14 Jun 2006 07:31:19 -0500 > committer James Bottomley <jejb@mulgrave.il.steeleye.com> Tue, 20 Jun 2006 05:34:01 -0500 > > [SCSI] 53c700: remove reliance on deprecated cmnd fields > ... > > + SDp->hostdata = kmalloc(GFP_KERNEL, sizeof(struct NCR_700_sense)); > + > + if (!SDp->hostdata) > + return -ENOMEM; "I'll take reversed arguments for $100 please Alex". Signed-off-by:
Dave Jones <davej@redhat.com> Signed-off-by:
-
Malcolm Parsons authored
binfmt_flat.c calls set_personality with PER_LINUX as the personality. On the arm architecture this results in the program running in 26bit usermode. PER_LINUX_32BIT should be used instead. This doesn't affect other architectures that use binfmt_flat. Signed-off-by:
Greg Ungerer <gerg@uclinux.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Greg Ungerer authored
Change enable_irq() macro to be a statement, not expression. Signed-off-by:
-
Greg Ungerer authored
Fix PLL setting for the Coldfire 5249 CPU. This brings it into line with the new style frequency configuration of m68knommu parts. Signed-off-by:
-
Greg Ungerer authored
Fix flush code for the ColdFire 5206/5206e/5272 cases. Add support for the new ColdFire 532x CPU family Signed-off-by:
-
Philippe De Muyter authored
Here is a patch to the system call handling for 5307/5272/etc to: - fix the strace support (one tested the wrong bit) - make all system calls a little bit faster by inlining set_esp0 and supporting ENOSYS out of the critical path. - remove extraneous spaces Signed-off-by:
-
Greg Ungerer authored
This patch solve a bug triggered by execvp (this function use calloc to store the argument list and gcc 3.4.x align the stack to word, not to dword). This situation aren't related to signal handling and all 2.6.x have the bug. On ColdFire targets we must force the stack to be aligned. Original patch from Andrea Tarani <andrea.tarani@gilbarco.com>, Signed-off-by:
-
Greg Ungerer authored
Remove list of fixed clock frequency options used for configuring master clock, and make field an int. Much more flexible this way, no need to add more options for every new used freqency. Signed-off-by:
-
Greg Ungerer authored
Remove list of fixed clock frequency options used for configuring master clock, and make field an int. Much more flexible this way, no need to add more options for every new used freqency. Signed-off-by:
-
Greg Ungerer authored
Add support for the AVNET 5282 board. Patch submitted by Daniel Alomar <dalomar@serrasold.com>. Signed-off-by:
-
Greg Ungerer authored
Add configure support for the new Freescale 532x family of CPUs. Patch submitted by Matt Waddel <Matt.Waddel@freescale.com>. Signed-off-by:
-
Linus Torvalds authored
This reverts commits 3e3318de [PATCH] swsusp: x86_64 mark special saveable/unsaveable pages b6370d96 [PATCH] swsusp: i386 mark special saveable/unsaveable pages ce4ab001 [PATCH] swsusp: add architecture special saveable pages support because not only do they apparently cause page faults on x86, the infrastructure doesn't compile on powerpc. Signed-off-by:
-
Greg Ungerer authored
Add build support for the new Freescale 532x CPU platforms. Signed-off-by:
-
Greg Ungerer authored
Add support for the UART addressing on the new Freescale M532x CPU family. Signed-off-by:
-
Greg Ungerer authored
Add build support for new Freescale M532x CPU family timer. Signed-off-by:
-
Greg Ungerer authored
A cleanup of m68knommu/kernel/setup.c : - No need to initialize global pointers to NULL, they will have that value automatically, and they eat up space in my data segment image in FLASH. - Remove get_cpuinfo. It has been replaced by show_cpuinfo. Signed-off-by:
Philippe De Muyter <phdm@macqel.be> Signed-off-by:
-
Greg Ungerer authored
Don't rely on DEBUG having a value, check for it being defined. Signed-off-by:
-
Greg Ungerer authored
Include the ColdFire 532x support when including ColdFire peripharp support definitions. Signed-off-by:
-
Greg Ungerer authored
Add cache init support for the new ColdFire 532x CPU family. Signed-off-by:
-
Greg Ungerer authored
ColdFire serial driver support for the new 532x CPU family UARTs. Patch submitted by Matt Waddel <Matt.Waddel@freescale.com>. Signed-off-by:
-
Greg Ungerer authored
Register definitions for the new Freescale 532x Coldfire CPU family. Signed-off-by:
-
Greg Ungerer authored
Add kernel startup code for the new Freescale 532x CPU family. Signed-off-by:
-
Greg Ungerer authored
Modify the m68knommu/ColdFire PIT timer code to use register offsets with raw_read/raw_write access, instead of a mapped struct. Signed-off-by:
-
Greg Ungerer authored
Remove use of rom_length. It serves not real purpose, and when we move to new stye RAM configuration it will not be needed. Signed-off-by:
-
Greg Ungerer authored
Switch to naming the architecture config options for the m68knommu branch as "M68K", dropping "M68KNOMMU". The CONFIG_MMU separates the 2 now, and the m68knommu branch is still strictly speaking an M68K (including the ColdFire parts). Signed-off-by:
-
Greg Ungerer authored
Modify the m68knommu/ColdFire core timer code to use register offsets with raw_read/raw_write access, instead of a mapped struct. Signed-off-by:
-
Greg Ungerer authored
Specify the struct mapping used on the new Freescale 532x CPU family's FEC ethernet core. Patch submitted by Matt Waddel <Matt.Waddel@freescale.com>. Signed-off-by:
-
Al Viro authored
Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
-
Alexey Dobriyan authored
Signed-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Cc: Nathan Scott <nathans@sgi.com> Signed-off-by:
-
- 25 Jun, 2006 6 commits
-
-
Linus Torvalds authored
* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband: IB/iser: iSER Kconfig and Makefile IB/iser: iSER handling of memory for RDMA IB/iser: iSER RDMA CM (CMA) and IB verbs interaction IB/iser: iSER initiator iSCSI PDU and TX/RX IB/iser: iSCSI iSER transport provider high level code IB/iser: iSCSI iSER transport provider header file IB/uverbs: Remove unnecessary list_del()s IB/uverbs: Don't free wr list when it's known to be empty
-
Linus Torvalds authored
Trond had apparently merged the same patch twice, causing a duplicate include of the "internal.h" file, with resulting obvious confusion. Tssk. I'm the only one allowed to send out trees that don't even compile! Who does this Trond guy think he is? Signed-off-by: -
Björn Steinbrink authored
Copy the softirq bits in preempt_count from the current context into the hardirq context when using 4K stacks to make the softirq_count macro work correctly and thereby fix softirq cpu time accounting. Signed-off-by:
Björn Steinbrink <B.Steinbrink@gmx.de> Acked-by:
Arjan van de Ven <arjan@linux.intel.com> Signed-off-by:
-
git://git.linux-nfs.org/pub/linux/nfs-2.6Linus Torvalds authored
* git://git.linux-nfs.org/pub/linux/nfs-2.6: (51 commits) nfs: remove nfs_put_link() nfs-build-fix-99 git-nfs-build-fixes Merge branch 'odirect' NFS: alloc nfs_read/write_data as direct I/O is scheduled NFS: Eliminate nfs_get_user_pages() NFS: refactor nfs_direct_free_user_pages NFS: remove user_addr, user_count, and pos from nfs_direct_req NFS: "open code" the NFS direct write rescheduler NFS: Separate functions for counting outstanding NFS direct I/Os NLM: Fix reclaim races NLM: sem to mutex conversion locks.c: add the fl_owner to nlm_compare_locks NFS: Display the chosen RPCSEC_GSS security flavour in /proc/mounts NFS: Split fs/nfs/inode.c NFS: Fix typo in nfs_do_clone_mount() NFS: Fix compile errors introduced by referrals patches NFSv4: Ensure that referral mounts bind to a reserved port NFSv4: A root pathname is sent as a zero component4 NFSv4: Follow a referral ...
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvb: (244 commits) V4L/DVB (4210b): git-dvb: tea575x-tuner build fix V4L/DVB (4210a): git-dvb versus matroxfb V4L/DVB (4209): Added some BTTV PCI IDs for newer boards Fixes some sync issues between V4L/DVB development and GIT V4L/DVB (4206): Cx88-blackbird: always set encoder height based on tvnorm->id V4L/DVB (4205): Merge tda9887 module into tuner. V4L/DVB (4203): Explicitly set the enum values. V4L/DVB (4202): allow selecting CX2341x port mode V4L/DVB (4200): Disable bitrate_mode when encoding mpeg-1. V4L/DVB (4199): Add cx2341x-specific control array to cx2341x.c V4L/DVB (4198): Avoid newer usages of obsoleted experimental MPEGCOMP API V4L/DVB (4197): Port new MPEG API to saa7134-empress with saa6752hs V4L/DVB (4196): Port cx88-blackbird to the new MPEG API. V4L/DVB (4193): Update cx2341x fw encoding API doc. V4L/DVB (4192): Use control helpers for saa7115, cx25840, msp3400. V4L/DVB (4191): Add CX2341X MPEG encoder module. V4L/DVB (4190): Add helper functions for control processing to v4l2-common. V4L/DVB (4189): Add videodev support for VIDIOC_S/G/TRY_EXT_CTRLS. V4L/DVB (4188): Add new MPEG control/ioctl definitions to videodev2.h V4L/DVB (4186): Add support for the DNTV Live! mini DVB-T card. ...
-
Linus Torvalds authored
Not that x86-64 and other architecture support should be difficult to add (trivial fixups to the data format and add the proper linker script entry). Signed-off-by:
-
