- 18 Nov, 2011 12 commits
-
-
Jiri Pirko authored
Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
Apparently using variable-length array is not correct (https://lkml.org/lkml/2011/10/23/25). So remove it. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
do fix features in similar way as bonding code does Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Dinesh Kumar Sharma authored
This provides flexibility to set the pipe handle using setsockopt. The pipe can be enabled (if disabled) later using ioctl. Signed-off-by: Hemant Ramdasi <hemant.ramdasi@stericsson.com> Signed-off-by: Dinesh Kumar Sharma <dinesh.sharma@stericsson.com> Acked-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Herbert Xu authored
ip_gre: Set needed_headroom dynamically again Now that all needed_headroom users have been fixed up so that we can safely increase needed_headroom, this patch restore the dynamic update of needed_headroom. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Herbert Xu authored
packet: Add needed_tailroom to packet_sendmsg_spkt While auditing LL_ALLOCATED_SPACE I noticed that packet_sendmsg_spkt did not include needed_tailroom when allocating an skb. This isn't a fatal error as we should always tolerate inadequate tail room but it isn't optimal. This patch fixes that. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Herbert Xu authored
net: Remove LL_ALLOCATED_SPACE The macro LL_ALLOCATED_SPACE was ill-conceived. It applies the alignment to the sum of needed_headroom and needed_tailroom. As the amount that is then reserved for head room is needed_headroom with alignment, this means that the tail room left may be too small. Now that all uses of LL_ALLOCATED_SPACE have been removed, this patch finally removes the macro itself. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Herbert Xu authored
net: Remove all uses of LL_ALLOCATED_SPACE The macro LL_ALLOCATED_SPACE was ill-conceived. It applies the alignment to the sum of needed_headroom and needed_tailroom. As the amount that is then reserved for head room is needed_headroom with alignment, this means that the tail room left may be too small. This patch replaces all uses of LL_ALLOCATED_SPACE with the macro LL_RESERVED_SPACE and direct reference to needed_tailroom. This also fixes the problem with needed_headroom changing between allocating the skb and reserving the head room. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Herbert Xu authored
ipv6: Remove all uses of LL_ALLOCATED_SPACE The macro LL_ALLOCATED_SPACE was ill-conceived. It applies the alignment to the sum of needed_headroom and needed_tailroom. As the amount that is then reserved for head room is needed_headroom with alignment, this means that the tail room left may be too small. This patch replaces all uses of LL_ALLOCATED_SPACE in net/ipv6 with the macro LL_RESERVED_SPACE and direct reference to needed_tailroom. This also fixes the problem with needed_headroom changing between allocating the skb and reserving the head room. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Herbert Xu authored
ipv4: Remove all uses of LL_ALLOCATED_SPACE The macro LL_ALLOCATED_SPACE was ill-conceived. It applies the alignment to the sum of needed_headroom and needed_tailroom. As the amount that is then reserved for head room is needed_headroom with alignment, this means that the tail room left may be too small. This patch replaces all uses of LL_ALLOCATED_SPACE in net/ipv4 with the macro LL_RESERVED_SPACE and direct reference to needed_tailroom. This also fixes the problem with needed_headroom changing between allocating the skb and reserving the head room. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
-
david decotigny authored
The software stats are updated from BH, this change ensures that 32b UP hosts use appropriate protection. Tested: - HW/SW stats consistent with pktgen (in particular tx=rx) - HW/SW stats consistent when tx/rx offloads disabled - no problem with+without lockdep (SMP 16-way) Signed-off-by: David Decotigny <david.decotigny@google.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
This is very similar to bnx2x conversion, but bnx2 only requires 16bytes alignement at start of the received frame to store its l2_fhdr, so goal was not to reduce skb truesize (in fact it should not change after this patch) Using build_skb() reduces cache line misses in the driver, since we use cache hot skb instead of cold ones. Number of in-flight sk_buff structures is lower, they are more likely recycled in SLUB caches while still hot. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> CC: Michael Chan <mchan@broadcom.com> CC: Eilon Greenstein <eilong@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 17 Nov, 2011 21 commits
-
-
Eric Dumazet authored
Most machines dont use RPS/RFS, and pay a fair amount of instructions in netif_receive_skb() / netif_rx() / get_rps_cpu() just to discover RPS/RFS is not setup. Add a jump_label named rps_needed. If no device rps_map or global rps_sock_flow_table is setup, netif_receive_skb() / netif_rx() do a single instruction instead of many ones, including conditional jumps. jmp +0 (if CONFIG_JUMP_LABEL=y) Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> CC: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Wolfgang Grandegger authored
The re-binding (unbind..bind) of an EMAC device fails because the static variable "busy_phy_map" is not updated when the device is removed. Signed-off-by: Wolfgang Grandegger <wg@denx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
John W. Linville authored
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem Conflicts: include/net/bluetooth/bluetooth.h
-
David S. Miller authored
Signed-off-by: David S. Miller <davem@davemloft.net>
-
Matti Vaittinen authored
This patch fixes a crash when non existing IPv6 route is tried to be changed. When new destination node was inserted in middle of FIB6 tree, no relevant sanity checks were performed. Later route insertion might have been prevented due to invalid request, causing node with no rt info being left in tree. When this node was accessed, a crash occurred. Patch adds missing checks in fib6_add_1() Signed-off-by: Matti Vaittinen <Mazziesaccount@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
david decotigny authored
Mark stats timer as deferrable: punctuality in waking the stats timer callback doesn't matter much, as it is responsible only to avoid integer wraparound. We need at least 1 other timer to fire within 17s (fully loaded 1Gbps) to avoid wrap-arounds. Desired period is still 10s. Signed-off-by: David Decotigny <david.decotigny@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
david decotigny authored
This adds code to update the stats counter for dropped RX frames. Signed-off-by: David Decotigny <david.decotigny@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
david decotigny authored
This commit implements the ndo_get_stats64() API for forcedeth. Since hardware stats are being updated from different contexts (process and timer), this commit adds synchronization. For software stats, it relies on the u64_stats_sync.h API. Tested: - 16-way SMP x86_64 -> RX bytes:7244556582 (7.2 GB) TX bytes:181904254 (181.9 MB) - pktgen + loopback: identical rx_bytes/tx_bytes and rx_packets/tx_packets Signed-off-by: David Decotigny <david.decotigny@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sameer Nanda authored
This adds a new module parameter "debug_tx_timeout" to silence most debug messages in case of TX timeout. These messages don't provide a signal/noise ratio high enough for production systems and, with ~30kB logged each time, they tend to add to a cascade effect if the system is already under stress (memory pressure, disk, etc.). By default, the parameter is clear, meaning that only a single warning will be reported. Signed-off-by: David Decotigny <david.decotigny@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Mike Ditto authored
This adds a few kernel messages to indicate whether PCIe interrupts are signaled with MSI or MSI-X. Signed-off-by: David Decotigny <david.decotigny@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
david decotigny authored
This adds the /sys/class/net/DEV/queues/Q/tx_timeout attribute containing the total number of timeout events on the given queue. It is always available with CONFIG_SYSFS, independently of CONFIG_RPS/XPS. Credits to Stephen Hemminger for a preliminary version of this patch. Tested: without CONFIG_SYSFS (compilation only) with sysfs and without CONFIG_RPS & CONFIG_XPS with sysfs and without CONFIG_RPS with sysfs and without CONFIG_XPS with defaults Signed-off-by: David Decotigny <david.decotigny@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
david decotigny authored
This commit fixes following warning: net/core/net-sysfs.c:921:6: warning: symbol 'numa_node' shadows an earlier one include/linux/topology.h:222:1: originally declared here Signed-off-by: David Decotigny <david.decotigny@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
david decotigny authored
This change makes sure that tx_packets/rx_bytes ifconfig counters are updated even on NICs that don't provide hardware support for these stats: they are now updated in software. For the sake of consistency, we also now have tx_bytes updated in software (hardware counters include ethernet CRC, and software doesn't account for it). This reverts parts of: - "forcedeth: statistics optimization" (21828163) - "forcedeth: Improve stats counters" (0bdfea8b) - "forcedeth: remove unneeded stats updates" (4687f3f3) Tested: pktgen + loopback (http://patchwork.ozlabs.org/patch/124698/) reports identical tx_packets/rx_packets and tx_bytes/rx_bytes. Signed-off-by: David Decotigny <david.decotigny@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> (cherry picked from commit 898bdf2c)
-
Michał Mirosław authored
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Michał Mirosław authored
Save some punctuation by using bool type's property equivalent to doubled negation operator. Reported-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Michał Mirosław authored
Add missing spaces around multiplication operator. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Joe Perches authored
Reduce the number of #defines, use the normal #define from if_ether.h Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Joe Perches authored
Reduce the number of #defines, use the normal #define from if_ether.h Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Joe Perches authored
Reduce the number of #defines, use the normal #define from if_ether.h Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Joe Perches authored
Reduce the number of #defines, use the normal #define from if_ether.h Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Joe Perches authored
Reduce the number of #defines, use the normal #define from if_ether.h Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 16 Nov, 2011 7 commits
-
-
Matt Carlson authored
Translating between ethtool advertisement settings and MII advertisements are common operations for ethernet drivers. This patch adds a set of helper functions that implements the conversion. The patch then modifies a couple of the drivers to use the new functions. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
Since multiple team instances are putting defined options into their option list, during register each option must be cloned before added into list. This resolves uncool memory corruptions when using multiple teams. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
No need to have spinlock for this purpose. So convert this to mutex and avoid current schedule while atomic problems in netlink code. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Dan Carpenter authored
dev_queue_xmit() consumes its own skb, so the call to dev_kfree_skb() in lowpan_fragment_xmit() is a double free. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Padmanabh Ratnakar authored
Use V1 version of query link status command for Lancer. Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-