- 23 Jan, 2020 4 commits
-
-
Arnd Bergmann authored
commit 3499e87e upstream. clang inlines the dev_ethtool() more aggressively than gcc does, leading to a larger amount of used stack space: net/core/ethtool.c:2536:24: error: stack frame size of 1216 bytes in function 'dev_ethtool' [-Werror,-Wframe-larger-than=] Marking the sub-functions that require the most stack space as noinline_for_stack gives us reasonable behavior on all compilers. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Reviewed-by:
Michal Kubecek <mkubecek@suse.cz> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Miles Chen <miles.chen@mediatek.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jiri Kosina authored
[ Upstream commit 9e635c28 ] hidraw and uhid device nodes are always available for writing so we should always report EPOLLOUT and EPOLLWRNORM bits, not only in the cases when there is nothing to read. Reported-by:
Linus Torvalds <torvalds@linux-foundation.org> Fixes: be54e746 ("HID: uhid: Fix returning EPOLLOUT from uhid_char_poll") Fixes: 9f3b61dc ("HID: hidraw: Fix returning EPOLLOUT from hidraw_poll") Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Marcel Holtmann authored
[ Upstream commit 9f3b61dc ] When polling a connected /dev/hidrawX device, it is useful to get the EPOLLOUT when writing is possible. Since writing is possible as soon as the device is connected, always return it. Right now EPOLLOUT is only returned when there are also input reports are available. This works if devices start sending reports when connected, but some HID devices might need an output report first before sending any input reports. This change will allow using EPOLLOUT here as well. Fixes: 378b8037 ("hidraw: Return EPOLLOUT from hidraw_poll") Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Cc: stable@vger.kernel.org Signed-off-by:
-
Fabian Henneke authored
[ Upstream commit 378b8037 ] Always return EPOLLOUT from hidraw_poll when a device is connected. This is safe since writes are always possible (but will always block). hidraw does not support non-blocking writes and instead always calls blocking backend functions on write requests. Hence, so far, a call to poll never returned EPOLLOUT, which confuses tools like socat. Signed-off-by:
Fabian Henneke <fabian.henneke@gmail.com> In-reply-to: <CA+hv5qkyis03CgYTWeWX9cr0my-d2Oe+aZo+mjmWRXgjrGqyrw@mail.gmail.com> Signed-off-by:
-
- 14 Jan, 2020 33 commits
-
-
Greg Kroah-Hartman authored
-
Akeem G Abodunrin authored
commit bc8a76a1 upstream. Intel ID: PSIRT-TA-201910-001 CVEID: CVE-2019-14615 Intel GPU Hardware prior to Gen11 does not clear EU state during a context switch. This can result in information leakage between contexts. For Gen8 and Gen9, hardware provides a mechanism for fast cleardown of the EU state, by issuing a PIPE_CONTROL with bit 27 set. We can use this in a context batch buffer to explicitly cleardown the state on every context switch. As this workaround is already in place for gen8, we can borrow the code verbatim for Gen9. Signed-off-by:
Mika Kuoppala <mika.kuoppala@linux.intel.com> Signed-off-by:
Akeem G Abodunrin <akeem.g.abodunrin@intel.com> Cc: Kumar Valsan Prathap <prathap.kumar.valsan@intel.com> Cc: Chris Wilson <chris.p.wilson@intel.com> Cc: Balestrieri Francesco <francesco.balestrieri@intel.com> Cc: Bloomfield Jon <jon.bloomfield@intel.com> Cc: Dutt Sudeep <sudeep.dutt@intel.com> Signed-off-by:
-
Florian Westphal authored
commit 22dad713 upstream. The set uadt functions assume lineno is never NULL, but it is in case of ip_set_utest(). syzkaller managed to generate a netlink message that calls this with LINENO attr present: general protection fault: 0000 [#1] PREEMPT SMP KASAN RIP: 0010:hash_mac4_uadt+0x1bc/0x470 net/netfilter/ipset/ip_set_hash_mac.c:104 Call Trace: ip_set_utest+0x55b/0x890 net/netfilter/ipset/ip_set_core.c:1867 nfnetlink_rcv_msg+0xcf2/0xfb0 net/netfilter/nfnetlink.c:229 netlink_rcv_skb+0x177/0x450 net/netlink/af_netlink.c:2477 nfnetlink_rcv+0x1ba/0x460 net/netfilter/nfnetlink.c:563 pass a dummy lineno storage, its easier than patching all set implementations. This seems to be a day-0 bug. Cc: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu> Reported-by: syzbot+34bd2369d38707f3f4a7@syzkaller.appspotmail.com Fixes: a7b4f989 ("netfilter: ipset: IP set core support") Signed-off-by:
Florian Westphal <fw@strlen.de> Acked-by:
Jozsef Kadlecsik <kadlec@blackhole.kfki.hu> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Florian Westphal authored
commit 1b789577 upstream. We get crash when the targets checkentry function tries to make use of the network namespace pointer for arptables. When the net pointer got added back in 2010, only ip/ip6/ebtables were changed to initialize it, so arptables has this set to NULL. This isn't a problem for normal arptables because no existing arptables target has a checkentry function that makes use of par->net. However, direct users of the setsockopt interface can provide any target they want as long as its registered for ARP or UNPSEC protocols. syzkaller managed to send a semi-valid arptables rule for RATEEST target which is enough to trigger NULL deref: kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] PREEMPT SMP KASAN RIP: xt_rateest_tg_checkentry+0x11d/0xb40 net/netfilter/xt_RATEEST.c:109 [..] xt_check_target+0x283/0x690 net/netfilter/x_tables.c:1019 check_target net/ipv4/netfilter/arp_tables.c:399 [inline] find_check_entry net/ipv4/netfilter/arp_tables.c:422 [inline] translate_table+0x1005/0x1d70 net/ipv4/netfilter/arp_tables.c:572 do_replace net/ipv4/netfilter/arp_tables.c:977 [inline] do_arpt_set_ctl+0x310/0x640 net/ipv4/netfilter/arp_tables.c:1456 Fixes: add67461 ("netfilter: add struct net * to target parameters") Reported-by: syzbot+d7358a458d8a81aee898@syzkaller.appspotmail.com Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
Alan Stern authored
commit 2548288b upstream. It turns out that even though endpoints with a maxpacket length of 0 aren't useful for data transfer, the descriptors do serve other purposes. In particular, skipping them will also skip over other class-specific descriptors for classes such as UVC. This unexpected side effect has caused some UVC cameras to stop working. In addition, the USB spec requires that when isochronous endpoint descriptors are present in an interface's altsetting 0 (which is true on some devices), the maxpacket size _must_ be set to 0. Warning about such things seems like a bad idea. This patch updates an earlier commit which would log a warning and skip these endpoint descriptors. Now we only log a warning, and we don't even do that for isochronous endpoints in altsetting 0. We don't need to worry about preventing endpoints with maxpacket = 0 from ever being used for data transfers; usb_submit_urb() already checks for this. Reported-and-tested-by:
Roger Whittaker <Roger.Whittaker@suse.com> Fixes: d482c7bb ("USB: Skip endpoints with 0 maxpacket length") Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> CC: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://marc.info/?l=linux-usb&m=157790377329882&w=2 Link: https://lore.kernel.org/r/Pine.LNX.4.44L0.2001061040270.1514-100000@iolanthe.rowland.orgSigned-off-by:
-
Navid Emamdoost authored
commit a2cdd074 upstream. In rtl8xxxu_submit_int_urb if usb_submit_urb fails the allocated urb should be released. Signed-off-by:
Navid Emamdoost <navid.emamdoost@gmail.com> Reviewed-by:
Chris Chiu <chiu@endlessm.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Cc: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by:
-
Navid Emamdoost authored
commit 0e62395d upstream. In bfad_im_get_stats if bfa_port_get_stats fails, allocated memory needs to be released. Link: https://lore.kernel.org/r/20190910234417.22151-1-navid.emamdoost@gmail.comSigned-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Cc: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by:
-
Navid Emamdoost authored
commit db8fd2cd upstream. In mwifiex_pcie_alloc_cmdrsp_buf, a new skb is allocated which should be released if mwifiex_map_pci_memory() fails. The release is added. Fixes: fc331460 ("mwifiex: use pci_alloc/free_consistent APIs for PCIe") Signed-off-by:
Ganapathi Bhat <gbhat@marvell.com> Signed-off-by:
-
Ganapathi Bhat authored
commit 3d94a4a8 upstream. mwifiex_process_country_ie() function parse elements of bss descriptor in beacon packet. When processing WLAN_EID_COUNTRY element, there is no upper limit check for country_ie_len before calling memcpy. The destination buffer domain_info->triplet is an array of length MWIFIEX_MAX_TRIPLET_802_11D(83). The remote attacker can build a fake AP with the same ssid as real AP, and send malicous beacon packet with long WLAN_EID_COUNTRY elemen (country_ie_len > 83). Attacker can force STA connect to fake AP on a different channel. When the victim STA connects to fake AP, will trigger the heap buffer overflow. Fix this by checking for length and if found invalid, don not connect to the AP. This fix addresses CVE-2019-14895. Reported-by:
huangwen <huangwenabc@gmail.com> Signed-off-by:
-
Sudip Mukherjee authored
commit 273f6329 upstream. If the serial device is disconnected and reconnected, it re-enumerates properly but does not link it. fwiw, linking means just saving the port index, so allow it always as there is no harm in saving the same value again even if it tries to relink with the same port. Fixes: fb2b9001 ("tty: link tty and port before configuring it as console") Reported-by:
Kenneth R. Crudup <kenny@panix.com> Signed-off-by:
Sudip Mukherjee <sudipm.mukherjee@gmail.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191227174434.12057-1-sudipm.mukherjee@gmail.comSigned-off-by:
-
Sudip Mukherjee authored
commit fb2b9001 upstream. There seems to be a race condition in tty drivers and I could see on many boot cycles a NULL pointer dereference as tty_init_dev() tries to do 'tty->port->itty = tty' even though tty->port is NULL. 'tty->port' will be set by the driver and if the driver has not yet done it before we open the tty device we can get to this situation. By adding some extra debug prints, I noticed that: 6.650130: uart_add_one_port 6.663849: register_console 6.664846: tty_open 6.674391: tty_init_dev 6.675456: tty_port_link_device uart_add_one_port() registers the console, as soon as it registers, the userspace tries to use it and that leads to tty_open() but uart_add_one_port() has not yet done tty_port_link_device() and so tty->port is not yet configured when control reaches tty_init_dev(). Further look into the code and tty_port_link_device() is done by uart_add_one_port(). After registering the console uart_add_one_port() will call tty_port_register_device_attr_serdev() and tty_port_link_device() is called from this. Call add tty_port_link_device() before uart_configure_port() is done and add a check in tty_port_link_device() so that it only links the port if it has not been done yet. Suggested-by:
Jiri Slaby <jslaby@suse.com> Signed-off-by:
-
Michael Straube authored
commit 58dcc5bf upstream. This device was added to the stand-alone driver on github. Add it to the staging driver as well. Link: https://github.com/lwfinger/rtl8188eu/commit/b9b537aa25a8Signed-off-by:
Michael Straube <straube.linux@gmail.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191228143725.24455-1-straube.linux@gmail.comSigned-off-by:
-
Ian Abbott authored
commit a9d3a9ce upstream. The Advantech PCI-1713 has 32 analog input channels, but an incorrect bit-mask in the definition of the `PCI171X_MUX_CHANH(x)` and PCI171X_MUX_CHANL(x)` macros is causing channels 16 to 31 to be aliases of channels 0 to 15. Change the bit-mask value from 0xf to 0xff to fix it. Note that the channel numbers will have been range checked already, so the bit-mask isn't really needed. Fixes: 92c65e55 ("staging: comedi: adv_pci1710: define the mux control register bits") Reported-by:
Dmytro Fil <monkdaf@gmail.com> Cc: <stable@vger.kernel.org> # v4.5+ Signed-off-by:
Ian Abbott <abbotti@mev.co.uk> Link: https://lore.kernel.org/r/20191227170054.32051-1-abbotti@mev.co.ukSigned-off-by:
-
Paul Cercueil authored
commit c80d0f44 upstream. The IRQ handler was passed a pointer to a struct dma_controller, but the argument was then casted to a pointer to a struct musb_dma_controller. Fixes: 427c4f33 ("usb: struct device - replace bus_id with dev_name(), dev_set_name()") Signed-off-by:
Paul Cercueil <paul@crapouillou.net> Tested-by:
Artur Rojek <contact@artur-rojek.eu> Cc: stable@vger.kernel.org Signed-off-by:
Bin Liu <b-liu@ti.com> Link: https://lore.kernel.org/r/20191216161844.772-2-b-liu@ti.comSigned-off-by:
-
Paul Cercueil authored
commit 96a0c128 upstream. The pullup may be already enabled before the driver is initialized. This happens for instance on JZ4740. It has to be disabled at init time, as we cannot guarantee that a gadget driver will be bound to the UDC. Signed-off-by:
-
Tony Lindgren authored
commit 5fbf7a25 upstream. When disconnected as USB B-device, suspend interrupt should come before diconnect interrupt, because the DP/DM pins are shorter than the VBUS/GND pins on the USB connectors. But we sometimes get a suspend interrupt after disconnect interrupt. In that case we have devctl set to 99 with VBUS still valid and musb_pm_runtime_check_session() wrongly thinks we have an active session. We have no other interrupts after disconnect coming in this case at least with the omap2430 glue. Let's fix the issue by checking the interrupt status again with delayed work for the devctl 99 case. In the suspend after disconnect case the devctl session bit has cleared by then and musb can idle. For a typical USB B-device connect case we just continue with normal interrupts. Fixes: 467d5c98 ("usb: musb: Implement session bit based runtime PM for musb-core") Cc: Merlijn Wajer <merlijn@wizzup.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: Sebastian Reichel <sre@kernel.org> Cc: stable@vger.kernel.org Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Daniele Palmas authored
commit 2438c3a1 upstream. Telit FN980 flashing device 0x1bc7/0x9010 requires zero packet to be sent if out data size is is equal to the endpoint max size. Signed-off-by:
Daniele Palmas <dnlplm@gmail.com> [ johan: switch operands in conditional ] Cc: stable <stable@vger.kernel.org> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Malcolm Priestley authored
commit c0bcf9f3 upstream. intfdata will contain stale pointer when the device is detached after failed initialization when referenced in vt6656_disconnect Provide driver access to it here and NULL it. Cc: stable <stable@vger.kernel.org> Signed-off-by:
Malcolm Priestley <tvboxspy@gmail.com> Link: https://lore.kernel.org/r/6de448d7-d833-ef2e-dd7b-3ef9992fee0e@gmail.comSigned-off-by:
-
Oliver Hartkopp authored
commit e7153bf7 upstream. KMSAN sysbot detected a read access to an untinitialized value in the headroom of an outgoing CAN related sk_buff. When using CAN sockets this area is filled appropriately - but when using a packet socket this initialization is missing. The problematic read access occurs in the CAN receive path which can only be triggered when the sk_buff is sent through a (virtual) CAN interface. So we check in the sending path whether we need to perform the missing initializations. Fixes: d3b58c47 ("can: replace timestamp as unique skb attribute") Reported-by: syzbot+b02ff0707a97e4e79ebb@syzkaller.appspotmail.com Signed-off-by:
Oliver Hartkopp <socketcan@hartkopp.net> Tested-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
-
Florian Faber authored
commit 2d77bd61 upstream. Under load, the RX side of the mscan driver can get stuck while TX still works. Restarting the interface locks up the system. This behaviour could be reproduced reliably on a MPC5121e based system. The patch fixes the return value of the NAPI polling function (should be the number of processed packets, not constant 1) and the condition under which IRQs are enabled again after polling is finished. With this patch, no more lockups were observed over a test period of ten days. Fixes: afa17a50 ("net/can: add driver for mscan family & mpc52xx_mscan") Signed-off-by:
Florian Faber <faber@faberman.de> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by:
-
Johan Hovold authored
commit 2f361cd9 upstream. Make sure to always use the descriptors of the current alternate setting to avoid future issues when accessing fields that may differ between settings. Signed-off-by:
-
Wayne Lin authored
commit c4e4fccc upstream. [Why] According to DP spec, it should shift left 4 digits for NO_STOP_BIT in REMOTE_I2C_READ message. Not 5 digits. In current code, NO_STOP_BIT is always set to zero which means I2C master is always generating a I2C stop at the end of each I2C write transaction while handling REMOTE_I2C_READ sideband message. This issue might have the generated I2C signal not meeting the requirement. Take random read in I2C for instance, I2C master should generate a repeat start to start to read data after writing the read address. This issue will cause the I2C master to generate a stop-start rather than a re-start which is not expected in I2C random read. [How] Correct the shifting value of NO_STOP_BIT for DP_REMOTE_I2C_READ case in drm_dp_encode_sideband_req(). Changes since v1:(https://patchwork.kernel.org/patch/11312667/) * Add more descriptions in commit and cc to stable Fixes: ad7f8a1f ("drm/helper: add Displayport multi-stream helper (v0.6)") Reviewed-by:
Harry Wentland <harry.wentland@amd.com> Signed-off-by:
Wayne Lin <Wayne.Lin@amd.com> Cc: stable@vger.kernel.org Signed-off-by:
Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200103055001.10287-1-Wayne.Lin@amd.comSigned-off-by:
-
Dmitry Torokhov authored
commit cb222aed upstream. If we happen to have a garbage in input device's keycode table with values too big we'll end up doing clear_bit() with offset way outside of our bitmaps, damaging other objects within an input device or even outside of it. Let's add sanity checks to the returned old keycodes. Reported-by: syzbot+c769968809f9359b07aa@syzkaller.appspotmail.com Reported-by: syzbot+76f3a30e88d256644c78@syzkaller.appspotmail.com Link: https://lore.kernel.org/r/20191207212757.GA245964@dtor-wsSigned-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Dmitry Torokhov authored
commit 4f388217 upstream. We should not be leaving half-mapped usages with potentially invalid keycodes, as that may confuse hidinput_find_key() when the key is located by index, which may end up feeding way too large keycode into the VT keyboard handler and cause OOB write there: BUG: KASAN: global-out-of-bounds in clear_bit include/asm-generic/bitops-instrumented.h:56 [inline] BUG: KASAN: global-out-of-bounds in kbd_keycode drivers/tty/vt/keyboard.c:1411 [inline] BUG: KASAN: global-out-of-bounds in kbd_event+0xe6b/0x3790 drivers/tty/vt/keyboard.c:1495 Write of size 8 at addr ffffffff89a1b2d8 by task syz-executor108/1722 ... kbd_keycode drivers/tty/vt/keyboard.c:1411 [inline] kbd_event+0xe6b/0x3790 drivers/tty/vt/keyboard.c:1495 input_to_handler+0x3b6/0x4c0 drivers/input/input.c:118 input_pass_values.part.0+0x2e3/0x720 drivers/input/input.c:145 input_pass_values drivers/input/input.c:949 [inline] input_set_keycode+0x290/0x320 drivers/input/input.c:954 evdev_handle_set_keycode_v2+0xc4/0x120 drivers/input/evdev.c:882 evdev_do_ioctl drivers/input/evdev.c:1150 [inline] Cc: stable@vger.kernel.org Reported-by: syzbot+19340dff067c2d3835c0@syzkaller.appspotmail.com Signed-off-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by:
-
Marcel Holtmann authored
commit be54e746 upstream. Always return EPOLLOUT from uhid_char_poll to allow polling /dev/uhid for writable state. Fixes: 1f9dec1e ("HID: uhid: allow poll()'ing on uhid devices") Signed-off-by:
-
Alan Stern authored
commit 8ec321e9 upstream. The syzbot fuzzer found a slab-out-of-bounds bug in the HID report handler. The bug was caused by a report descriptor which included a field with size 12 bits and count 4899, for a total size of 7349 bytes. The usbhid driver uses at most a single-page 4-KB buffer for reports. In the test there wasn't any problem about overflowing the buffer, since only one byte was received from the device. Rather, the bug occurred when the HID core tried to extract the data from the report fields, which caused it to try reading data beyond the end of the allocated buffer. This patch fixes the problem by rejecting any report whose total length exceeds the HID_MAX_BUFFER_SIZE limit (minus one byte to allow for a possible report index). In theory a device could have a report longer than that, but if there was such a thing we wouldn't handle it correctly anyway. Reported-and-tested-by: syzbot+09ef48aa58261464b621@syzkaller.appspotmail.com Signed-off-by:
-
Steven Rostedt (VMware) authored
commit b8299d36 upstream. On some archs with some configurations, MCOUNT_INSN_SIZE is not defined, and this makes the stack tracer fail to compile. Just define it to zero in this case. Link: https://lore.kernel.org/r/202001020219.zvE3vsty%lkp@intel.com Cc: stable@vger.kernel.org Fixes: 4df29712 ("tracing: Remove most or all of stack tracer stack size from stack_max_size") Reported-by:
kbuild test robot <lkp@intel.com> Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
-
Kaitao Cheng authored
commit 50f9ad60 upstream. In the function, if register_trace_sched_migrate_task() returns error, sched_switch/sched_wakeup_new/sched_wakeup won't unregister. That is why fail_deprobe_sched_switch was added. Link: http://lkml.kernel.org/r/20191231133530.2794-1-pilgrimtao@gmail.com Cc: stable@vger.kernel.org Fixes: 478142c3 ("tracing: do not grab lock in wakeup latency function tracing") Signed-off-by:
Kaitao Cheng <pilgrimtao@gmail.com> Signed-off-by:
-
Marcelo Ricardo Leitner authored
commit 0b9aefea upstream. Markus Trippelsdorf reported that after commit dcb17d22 ("tcp: warn on bogus MSS and try to amend it") the kernel started logging the warning for a NIC driver that doesn't even support GRO. It was diagnosed that it was possibly caused on connections that were using TCP Timestamps but some packets lacked the Timestamps option. As we reduce rcv_mss when timestamps are used, the lack of them would cause the packets to be bigger than expected, although this is a valid case. As this warning is more as a hint, getting a clean-cut on the threshold is probably not worth the execution time spent on it. This patch thus alleviates the false-positives with 2 quick checks: by accounting for the entire TCP option space and also checking against the interface MTU if it's available. These changes, specially the MTU one, might mask some real positives, though if they are really happening, it's possible that sooner or later it will be triggered anyway. Reported-by:
Markus Trippelsdorf <markus@trippelsdorf.de> Cc: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
-
Takashi Iwai authored
commit 51d4efab upstream. Bose Companion 5 (with USB ID 05a7:1020) doesn't seem supporting reading back the sample rate, so the existing quirk is needed. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=206063 Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200104110936.14288-1-tiwai@suse.deSigned-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Guenter Roeck authored
commit c1ffba30 upstream. On shutdown, ehci_power_off() is called unconditionally to power off each port, even if it was never called to power on the port. For chipidea, this results in a call to ehci_ci_portpower() with a request to power off ports even if the port was never powered on. This results in the following warning from the regulator code. WARNING: CPU: 0 PID: 182 at drivers/regulator/core.c:2596 _regulator_disable+0x1a8/0x210 unbalanced disables for usb_otg2_vbus Modules linked in: CPU: 0 PID: 182 Comm: init Not tainted 5.4.6 #1 Hardware name: Freescale i.MX7 Dual (Device Tree) [<c0313658>] (unwind_backtrace) from [<c030d698>] (show_stack+0x10/0x14) [<c030d698>] (show_stack) from [<c1133afc>] (dump_stack+0xe0/0x10c) [<c1133afc>] (dump_stack) from [<c0349098>] (__warn+0xf4/0x10c) [<c0349098>] (__warn) from [<c0349128>] (warn_slowpath_fmt+0x78/0xbc) [<c0349128>] (warn_slowpath_fmt) from [<c09f36ac>] (_regulator_disable+0x1a8/0x210) [<c09f36ac>] (_regulator_disable) from [<c09f374c>] (regulator_disable+0x38/0xe8) [<c09f374c>] (regulator_disable) from [<c0df7bac>] (ehci_ci_portpower+0x38/0xdc) [<c0df7bac>] (ehci_ci_portpower) from [<c0db4fa4>] (ehci_port_power+0x50/0xa4) [<c0db4fa4>] (ehci_port_power) from [<c0db5420>] (ehci_silence_controller+0x5c/0xc4) [<c0db5420>] (ehci_silence_controller) from [<c0db7644>] (ehci_stop+0x3c/0xcc) [<c0db7644>] (ehci_stop) from [<c0d5bdc4>] (usb_remove_hcd+0xe0/0x19c) [<c0d5bdc4>] (usb_remove_hcd) from [<c0df7638>] (host_stop+0x38/0xa8) [<c0df7638>] (host_stop) from [<c0df2f34>] (ci_hdrc_remove+0x44/0xe4) ... Keeping track of the power enable state avoids the warning and traceback. Fixes: c8679a2f ("usb: chipidea: host: add portpower override") Cc: Michael Grzeschik <m.grzeschik@pengutronix.de> Cc: Peter Chen <peter.chen@freescale.com> Cc: stable@vger.kernel.org Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Acked-by:
Peter Chen <peter.chen@nxp.com> Link: https://lore.kernel.org/r/20191226155754.25451-1-linux@roeck-us.netSigned-off-by:
-
Will Deacon authored
commit 68faa679 upstream. 'chrdev_open()' calls 'cdev_get()' to obtain a reference to the 'struct cdev *' stashed in the 'i_cdev' field of the target inode structure. If the pointer is NULL, then it is initialised lazily by looking up the kobject in the 'cdev_map' and so the whole procedure is protected by the 'cdev_lock' spinlock to serialise initialisation of the shared pointer. Unfortunately, it is possible for the initialising thread to fail *after* installing the new pointer, for example if the subsequent '->open()' call on the file fails. In this case, 'cdev_put()' is called, the reference count on the kobject is dropped and, if nobody else has taken a reference, the release function is called which finally clears 'inode->i_cdev' from 'cdev_purge()' before potentially freeing the object. The problem here is that a racing thread can happily take the 'cdev_lock' and see the non-NULL pointer in the inode, which can result in a refcount increment from zero and a warning: | ------------[ cut here ]------------ | refcount_t: addition on 0; use-after-free. | WARNING: CPU: 2 PID: 6385 at lib/refcount.c:25 refcount_warn_saturate+0x6d/0xf0 | Modules linked in: | CPU: 2 PID: 6385 Comm: repro Not tainted 5.5.0-rc2+ #22 | Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014 | RIP: 0010:refcount_warn_saturate+0x6d/0xf0 | Code: 05 55 9a 15 01 01 e8 9d aa c8 ff 0f 0b c3 80 3d 45 9a 15 01 00 75 ce 48 c7 c7 00 9c 62 b3 c6 08 | RSP: 0018:ffffb524c1b9bc70 EFLAGS: 00010282 | RAX: 0000000000000000 RBX: ffff9e9da1f71390 RCX: 0000000000000000 | RDX: ffff9e9dbbd27618 RSI: ffff9e9dbbd18798 RDI: ffff9e9dbbd18798 | RBP: 0000000000000000 R08: 000000000000095f R09: 0000000000000039 | R10: 0000000000000000 R11: ffffb524c1b9bb20 R12: ffff9e9da1e8c700 | R13: ffffffffb25ee8b0 R14: 0000000000000000 R15: ffff9e9da1e8c700 | FS: 00007f3b87d26700(0000) GS:ffff9e9dbbd00000(0000) knlGS:0000000000000000 | CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 | CR2: 00007fc16909c000 CR3: 000000012df9c000 CR4: 00000000000006e0 | DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 | DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 | Call Trace: | kobject_get+0x5c/0x60 | cdev_get+0x2b/0x60 | chrdev_open+0x55/0x220 | ? cdev_put.part.3+0x20/0x20 | do_dentry_open+0x13a/0x390 | path_openat+0x2c8/0x1470 | do_filp_open+0x93/0x100 | ? selinux_file_ioctl+0x17f/0x220 | do_sys_open+0x186/0x220 | do_syscall_64+0x48/0x150 | entry_SYSCALL_64_after_hwframe+0x44/0xa9 | RIP: 0033:0x7f3b87efcd0e | Code: 89 54 24 08 e8 a3 f4 ff ff 8b 74 24 0c 48 8b 3c 24 41 89 c0 44 8b 54 24 08 b8 01 01 00 00 89 f4 | RSP: 002b:00007f3b87d259f0 EFLAGS: 00000293 ORIG_RAX: 0000000000000101 | RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f3b87efcd0e | RDX: 0000000000000000 RSI: 00007f3b87d25a80 RDI: 00000000ffffff9c | RBP: 00007f3b87d25e90 R08: 0000000000000000 R09: 0000000000000000 | R10: 0000000000000000 R11: 0000000000000293 R12: 00007ffe188f504e | R13: 00007ffe188f504f R14: 00007f3b87d26700 R15: 0000000000000000 | ---[ end trace 24f53ca58db8180a ]--- Since 'cdev_get()' can already fail to obtain a reference, simply move it over to use 'kobject_get_unless_zero()' instead of 'kobject_get()', which will cause the racing thread to return -ENXIO if the initialising thread fails unexpectedly. Cc: Hillf Danton <hdanton@sina.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Reported-by: syzbot+82defefbbd8527e1c2cb@syzkaller.appspotmail.com Signed-off-by:
Will Deacon <will@kernel.org> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191219120203.32691-1-will@kernel.orgSigned-off-by:
-
Jan Kara authored
commit c70c176f upstream. Make the function available for outside use and fortify it against NULL kobject. CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by:
Bart Van Assche <bart.vanassche@sandisk.com> Acked-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Jens Axboe <axboe@fb.com> Signed-off-by:
-
- 12 Jan, 2020 3 commits
-
-
Greg Kroah-Hartman authored
-
Daniele Palmas authored
commit 0d3010fa upstream. This patch adds the following Telit ME910G1 composition: 0x110a: tty, tty, tty, rmnet Signed-off-by:
-
Johan Hovold authored
commit 3e4f8e21 upstream. Amend the endpoint-descriptor sanity checks to detect all duplicate endpoint addresses in a configuration. Commit 0a8fd134 ("USB: fix problems with duplicate endpoint addresses") added a check for duplicate endpoint addresses within a single alternate setting, but did not look for duplicate addresses in other interfaces. The current check would also not detect all duplicate addresses when one endpoint is as a (bi-directional) control endpoint. This specifically avoids overwriting the endpoint entries in struct usb_device when enabling a duplicate endpoint, something which could potentially lead to crashes or leaks, for example, when endpoints are later disabled. Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
