- 12 Jul, 2011 40 commits
-
-
Paul Mackerras authored
This arranges for the top-level arch/powerpc/kvm/powerpc.c file to pass down some of the calls it gets to the lower-level subarchitecture specific code. The lower-level implementations (in booke.c and book3s.c) are no-ops. The coming book3s_hv.c will need this. Signed-off-by:
Paul Mackerras <paulus@samba.org> Signed-off-by:
Alexander Graf <agraf@suse.de>
-
Paul Mackerras authored
Doing so means that we don't have to save the flags anywhere and gets rid of the last reference to to_book3s(vcpu) in arch/powerpc/kvm/book3s.c. Doing so is OK because a program interrupt won't be generated at the same time as any other synchronous interrupt. If a program interrupt and an asynchronous interrupt (external or decrementer) are generated at the same time, the program interrupt will be delivered, which is correct because it has a higher priority, and then the asynchronous interrupt will be masked. We don't ever generate system reset or machine check interrupts to the guest, but if we did, then we would need to make sure they got delivered rather than the program interrupt. The current code would be wrong in this situation anyway since it would deliver the program interrupt as well as the reset/machine check interrupt. Signed-off-by:
-
Paul Mackerras authored
Instead of branching out-of-line with the DO_KVM macro to check if we are in a KVM guest at the time of an interrupt, this moves the KVM check inline in the first-level interrupt handlers. This speeds up the non-KVM case and makes sure that none of the interrupt handlers are missing the check. Because the first-level interrupt handlers are now larger, some things had to be move out of line in exceptions-64s.S. This all necessitated some minor changes to the interrupt entry code in KVM. This also streamlines the book3s_32 KVM test. Signed-off-by:
-
Paul Mackerras authored
In preparation for adding code to enable KVM to use hypervisor mode on 64-bit Book 3S processors, this splits book3s.c into two files, book3s.c and book3s_pr.c, where book3s_pr.c contains the code that is specific to running the guest in problem state (user mode) and book3s.c contains code which should apply to all Book 3S processors. In doing this, we abstract some details, namely the interrupt offset, updating the interrupt pending flag, and detecting if the guest is in a critical section. These are all things that will be different when we use hypervisor mode. Signed-off-by:
-
Paul Mackerras authored
This moves the slb field, which represents the state of the emulated SLB, from the kvmppc_vcpu_book3s struct to the kvm_vcpu_arch, and the hpte_hash_[v]pte[_long] fields from kvm_vcpu_arch to kvmppc_vcpu_book3s. This is in accord with the principle that the kvm_vcpu_arch struct represents the state of the emulated CPU, and the kvmppc_vcpu_book3s struct holds the auxiliary data structures used in the emulation. Signed-off-by:
-
Paul Mackerras authored
Commit 69acc0d3ba ("KVM: PPC: Resolve real-mode handlers through function exports") resulted in vcpu->arch.trampoline_lowmem and vcpu->arch.trampoline_enter ending up with kernel virtual addresses rather than physical addresses. This is OK on 64-bit Book3S machines, which ignore the top 4 bits of the effective address in real mode, but on 32-bit Book3S machines, accessing these addresses in real mode causes machine check interrupts, as the hardware uses the whole effective address as the physical address in real mode. This fixes the problem by using __pa() to convert these addresses to physical addresses. Signed-off-by: -
Takuya Yoshikawa authored
Suggested by Ingo and Avi. Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by:
Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp> Signed-off-by:
Marcelo Tosatti <mtosatti@redhat.com>
-
Takuya Yoshikawa authored
The current name does not explain the meaning well. So give it a better name "retry_walk" to show that we are trying the walk again. This was suggested by Ingo Molnar. Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Takuya Yoshikawa authored
Avoid two step jump to the error handling part. This eliminates the use of the variables present and rsvd_fault. We also use the const type qualifier to show that write/user/fetch_fault do not change in the function. Both of these were suggested by Ingo Molnar. Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Marcelo Tosatti authored
This reverts commit bee931d31e588b8eb86b7edee32fac2d16930cd7. TLB flush should be done lazily during guest entry, in kvm_mmu_load(). Signed-off-by: -
Scott Wood authored
Only look in the 4 entries that could possibly contain the entry we're looking for. Signed-off-by:
Scott Wood <scottwood@freescale.com> Signed-off-by:
-
Liu Yu authored
Dynamically assign host PIDs to guest PIDs, splitting each guest PID into multiple host (shadow) PIDs based on kernel/user and MSR[IS/DS]. Use both PID0 and PID1 so that the shadow PIDs for the right mode can be selected, that correspond both to guest TID = zero and guest TID = guest PID. This allows us to significantly reduce the frequency of needing to invalidate the entire TLB. When the guest mode or PID changes, we just update the host PID0/PID1. And since the allocation of shadow PIDs is global, multiple guests can share the TLB without conflict. Note that KVM does not yet support the guest setting PID1 or PID2 to a value other than zero. This will need to be fixed for nested KVM to work. Until then, we enforce the requirement for guest PID1/PID2 to stay zero by failing the emulation if the guest tries to set them to something else. Signed-off-by:
Liu Yu <yu.liu@freescale.com> Signed-off-by:
-
Liu Yu authored
Instead of a fully separate set of TLB entries, keep just the pfn and dirty status. Signed-off-by:
-
Scott Wood authored
This is a shared page used for paravirtualization. It is always present in the guest kernel's effective address space at the address indicated by the hypercall that enables it. The physical address specified by the hypercall is not used, as e500 does not have real mode. Signed-off-by:
-
Scott Wood authored
This allows large pages to be used on guest mappings backed by things like /dev/mem, resulting in a significant speedup when guest memory is mapped this way (it's useful for directly-assigned MMIO, too). This is not a substitute for hugetlbfs integration, but is useful for configurations where devices are directly assigned on chips without an IOMMU -- in these cases, we need guest physical and true physical to match, and be contiguous, so static reservation and mapping via /dev/mem is the most straightforward way to set things up. Signed-off-by:
-
Scott Wood authored
This is in line with what other architectures do, and will allow us to map things other than ordinary, unreserved kernel pages -- such as dedicated devices, or large contiguous reserved regions. Signed-off-by:
-
Scott Wood authored
This avoids races. It also means that we use the shadow TLB way, rather than the hardware hint -- if this is a problem, we could do a tlbsx before inserting a TLB0 entry. Signed-off-by:
-
Scott Wood authored
Since TLB1 loading doesn't check the shadow TLB before allocating another entry, you can get duplicates. Once shadow PIDs are enabled in a later patch, we won't need to invalidate the TLB on every switch, so this optimization won't be needed anyway. Signed-off-by:
-
Scott Wood authored
This is done lazily. The SPE save will be done only if the guest has used SPE since the last preemption or heavyweight exit. Restore will be done only on demand, when enabling MSR_SPE in the shadow MSR, in response to an SPE fault or mtmsr emulation. For SPEFSCR, Linux already switches it on context switch (non-lazily), so the only remaining bit is to save it between qemu and the guest. Signed-off-by:
-
Scott Wood authored
Keep the guest MSR and the guest-mode true MSR separate, rather than modifying the guest MSR on each guest entry to produce a true MSR. Any bits which should be modified based on guest MSR must be explicitly propagated from vcpu->arch.shared->msr to vcpu->arch.shadow_msr in kvmppc_set_msr(). While we're modifying the guest entry code, reorder a few instructions to bury some load latencies. Signed-off-by:
-
Scott Wood authored
Previously, these macros hardcoded THREAD_EVR0 as the base of the save area, relative to the base register passed. This base offset is now passed as a separate macro parameter, allowing reuse with other SPE save areas, such as used by KVM. Acked-by:
Kumar Gala <galak@kernel.crashing.org> Signed-off-by:
-
yu liu authored
giveup_spe() saves the SPE state which is protected by MSR[SPE]. However, modifying SPEFSCR does not trap when MSR[SPE]=0. And since SPEFSCR is already saved/restored in _switch(), not all the callers want to save SPEFSCR again. Thus, saving SPEFSCR should not belong to giveup_spe(). This patch moves SPEFSCR saving to flush_spe_to_thread(), and cleans up the caller that needs to save SPEFSCR accordingly. Signed-off-by:
-
Alexander Graf authored
Up until now, Book3S KVM had variables stored in the kernel that a kernel module or the kvm code in the kernel could read from to figure out where some real mode helper functions are located. This is all unnecessary. The high bits of the EA get ignore in real mode, so we can just use the pointer as is. Also, it's a lot easier on relocations when we use the normal way of resolving the address to a function, instead of jumping through hoops. This patch fixes compilation with CONFIG_RELOCATABLE=y. Signed-off-by: -
Stuart Yoder authored
When http://www.spinics.net/lists/kvm-ppc/msg02664.html was applied to produce commit b51e7aa7ed6d8d134d02df78300ab0f91cfff4d2, the removal of the conversion in add_exit_timing was left out. Signed-off-by:
Stuart Yoder <stuart.yoder@freescale.com> Signed-off-by:
-
Avi Kivity authored
kvm_set_cr0() and kvm_set_cr4(), and possible other functions, assume that kvm_mmu_reset_context() flushes the guest TLB. However, it does not. Fix by flushing the tlb (and syncing the new root as well). Signed-off-by:Avi Kivity <avi@redhat.com>
-
Avi Kivity authored
When CR0.WP=0, we sometimes map user pages as kernel pages (to allow the kernel to write to them). Unfortunately this also allows the kernel to fetch from these pages, even if CR4.SMEP is set. Adjust for this by also setting NX on the spte in these circumstances. Signed-off-by: -
Yang, Wei authored
This patch exposes ERMS feature to KVM guests. The REP MOVSB/STOSB instruction can enhance fast strings attempts to move as much of the data with larger size load/stores as possible. Signed-off-by:
Yang, Wei <wei.y.yang@intel.com> Signed-off-by:
-
Yang, Wei authored
This patch exposes RDWRGSFS bit to KVM guests. Signed-off-by:
-
Yang, Wei authored
This patch adds RDWRGSFS support when setting CR4. Signed-off-by:
-
Yang, Wei authored
This patch removes RDWRGSFS bit from CR4_RESERVED_BITS. Signed-off-by:
-
Yang, Wei Y authored
This patch exposes DRNG feature to KVM guests. The RDRAND instruction can provide software with sequences of random numbers generated from white noise. Signed-off-by:
-
Andre Przywara authored
commit 123108f1c1aafd51d6a5c79cc04d7999dd88a930 tried to fix KVMs XSAVE valid feature scanning, but it was wrong. It was not considering the sparse nature of this bitfield, instead reading values from uninitialized members of the entries array. This patch now separates subleaf indicies from KVM's array indicies and fills the entry before querying it's value. This fixes AVX support in KVM guests. Signed-off-by:
Andre Przywara <andre.przywara@amd.com> Signed-off-by:
-
Jan Kiszka authored
The documented behavior did not match the implemented one (which also never changed). Signed-off-by:
Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by:
-
Jan Kiszka authored
KVM_MAX_MSIX_PER_DEV implies that up to that many MSI-X entries can be requested. But the kernel so far rejected already the upper limit. Signed-off-by:
-
Alexander Graf authored
KVM has an ioctl to define which signal mask should be used while running inside VCPU_RUN. At least for big endian systems, this mask is different on 32-bit and 64-bit systems (though the size is identical). Add a compat wrapper that converts the mask to whatever the kernel accepts, allowing 32-bit kvm user space to set signal masks. This patch fixes qemu with --enable-io-thread on ppc64 hosts when running 32-bit user land. Signed-off-by:
-
Jan Kiszka authored
Neither host_irq nor the guest_msi struct are used anymore today. Tag the former, drop the latter to avoid confusion. Signed-off-by:
-
Yang, Wei Y authored
This patch adds instruction fetch checking when walking guest page table, to implement SMEP when emulating instead of executing natively. Signed-off-by:
Shan, Haitao <haitao.shan@intel.com> Signed-off-by:
Li, Xin <xin.li@intel.com> Signed-off-by:
-
Yang, Wei Y authored
This patch masks CPUID leaf 7 ebx against host capability word9. Signed-off-by:
-
Yang, Wei Y authored
This patch adds SMEP handling when setting CR4. Signed-off-by:
-
Yang, Wei Y authored
This patch removes SMEP bit from CR4_RESERVED_BITS. Signed-off-by:
-
