- 08 Jun, 2017 2 commits
-
-
Hans Verkuil authored
Fix messages like this: adv7842.c:(.text+0x2edadd): undefined reference to `cec_unregister_adapter' when CEC_CORE=m but the driver including media/cec.h is built-in. In that case the static inlines provided in media/cec.h should be used by that driver. Reported-by:
Randy Dunlap <rdunlap@infradead.org> Reported-by:
kbuild test robot <fengguang.wu@intel.com> Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Hans Verkuil authored
When calling CEC_RECEIVE do not check if the adapter is configured. Typically CEC_RECEIVE is called after a select() and if that indicates that there are messages in the receive queue, then you should always be able to dequeue a message. The race condition here is that a message has been received and is queued, so select() tells userspace that a message is available. But before the application calls CEC_RECEIVE the adapter is unconfigured (e.g. the HDMI cable is removed). Now select will always report that there is a message, but calling CEC_RECEIVE will always return -ENONET because the adapter is no longer configured and so will never actually dequeue the message. There is really no need for this check, and in fact the ENONET error code was never documented for CEC_RECEIVE. This may have been a left-over of old code that was never updated. Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Cc: <stable@vger.kernel.org> # for v4.10 and up Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
- 06 Jun, 2017 6 commits
-
-
Sean Young authored
Since this driver does no detection of hardware, it might be used with a non-sir port. Escape out if we are spinning. Reported-by:
kbuild test robot <fengguang.wu@intel.com> Signed-off-by:
Sean Young <sean@mess.org> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Arnd Bergmann authored
Fix a link error in this specific combination of config options: CONFIG_MEDIA_CEC_SUPPORT=y CONFIG_CEC_CORE=m CONFIG_MEDIA_CEC_NOTIFIER=y CONFIG_VIDEO_STI_HDMI_CEC=m CONFIG_DRM_STI=y drivers/gpu/drm/sti/sti_hdmi.o: In function `sti_hdmi_remove': sti_hdmi.c:(.text.sti_hdmi_remove+0x10): undefined reference to `cec_notifier_set_phys_addr' sti_hdmi.c:(.text.sti_hdmi_remove+0x34): undefined reference to `cec_notifier_put' drivers/gpu/drm/sti/sti_hdmi.o: In function `sti_hdmi_connector_get_modes': sti_hdmi.c:(.text.sti_hdmi_connector_get_modes+0x4a): undefined reference to `cec_notifier_set_phys_addr_from_edid' drivers/gpu/drm/sti/sti_hdmi.o: In function `sti_hdmi_probe': sti_hdmi.c:(.text.sti_hdmi_probe+0x204): undefined reference to `cec_notifier_get' drivers/gpu/drm/sti/sti_hdmi.o: In function `sti_hdmi_connector_detect': sti_hdmi.c:(.text.sti_hdmi_connector_detect+0x36): undefined reference to `cec_notifier_set_phys_addr' drivers/gpu/drm/sti/sti_hdmi.o: In function `sti_hdmi_disable': sti_hdmi.c:(.text.sti_hdmi_disable+0xc0): undefined reference to `cec_notifier_set_phys_addr' The version below seems to work, though I don't particularly like the IS_REACHABLE() addition since that can be confusing to users. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Arnd Bergmann authored
Changing the IS_REACHABLE() into a plain #ifdef broke the case of CONFIG_MEDIA_RC=m && CONFIG_MEDIA_CEC=y: drivers/media/cec/cec-core.o: In function `cec_unregister_adapter': cec-core.c:(.text.cec_unregister_adapter+0x18): undefined reference to `rc_unregister_device' drivers/media/cec/cec-core.o: In function `cec_delete_adapter': cec-core.c:(.text.cec_delete_adapter+0x54): undefined reference to `rc_free_device' drivers/media/cec/cec-core.o: In function `cec_register_adapter': cec-core.c:(.text.cec_register_adapter+0x94): undefined reference to `rc_register_device' cec-core.c:(.text.cec_register_adapter+0xa4): undefined reference to `rc_free_device' cec-core.c:(.text.cec_register_adapter+0x110): undefined reference to `rc_unregister_device' drivers/media/cec/cec-core.o: In function `cec_allocate_adapter': cec-core.c:(.text.cec_allocate_adapter+0x234): undefined reference to `rc_allocate_device' drivers/media/cec/cec-adap.o: In function `cec_received_msg': cec-adap.c:(.text.cec_received_msg+0x734): undefined reference to `rc_keydown' cec-adap.c:(.text.cec_received_msg+0x768): undefined reference to `rc_keyup' This adds an additional dependency to explicitly forbid this combination. Fixes: 5f2c467c ("[media] cec: add MEDIA_CEC_RC config option") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Christophe JAILLET authored
We should ensure that 'plane_no' is '< vb->num_planes' as done in 'vb2_plane_cookie' just a few lines below. Fixes: e23ccc0a ("[media] v4l: add videobuf2 Video for Linux 2 driver framework") Cc: stable@vger.kernel.org Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Wei Yongjun authored
The driver allocates the spinlock but not initialize it. Use spin_lock_init() on it to initialize it correctly. This is detected by Coccinelle semantic patch. Fixes: 0f314f6c ("[media] rainshadow-cec: new RainShadow Tech HDMI CEC driver") Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Philipp Zabel authored
The below mentioned fix contains a small but severe bug, fix it to make the driver work again. Fixes: 3538aa6e ("[media] tc358743: fix register i2c_rd/wr functions") Cc: Hans Verkuil <hans.verkuil@cisco.com> Cc: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Acked-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Hans Verkuil <hansverk@cisco.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
- 04 Jun, 2017 6 commits
-
-
Sean Young authored
A rc device can call ir_raw_event_handle() after rc_allocate_device(), but before rc_register_device() has completed. This is racey because rcdev->raw is set before rcdev->raw->thread has a valid value. Cc: stable@kernel.org Reported-by:
kbuild test robot <fengguang.wu@intel.com> Signed-off-by:
Sean Young <sean@mess.org> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Hans Verkuil authored
Just depend on DEBUG_FS, no need to invent a new kernel config. Especially since CEC can be enabled by drm without enabling MEDIA_SUPPORT. Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Hans Verkuil authored
This config option is strictly speaking independent of the media subsystem since it can be used by drm as well. Besides, it looks odd when drivers select CEC_CORE and MEDIA_CEC_NOTIFIER, that's inconsistent naming. Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Hans Verkuil authored
The CEC framework is used by both drm and media. That makes it tricky to get the dependencies right. This patch moves the CEC_CORE and MEDIA_CEC_NOTIFIER config options out of the media menu and instead drivers that want to use CEC should select CEC_CORE and MEDIA_CEC_NOTIFIER (if needed). Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Colin Ian King authored
exit_loop is not being initialized, so it contains garbage. Ensure it is initialized to false. Detected by CoverityScan, CID#1436409 ("Uninitialized scalar variable") Fixes: ea6a69de ("[media] rainshadow-cec: avoid -Wmaybe-uninitialized warning") Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Mauro Carvalho Chehab authored
Several atomisp files use: ccflags-y += -Werror As, on media, our usual procedure is to use W=1, and atomisp has *a lot* of warnings with such flag enabled,like: ./drivers/staging/media/atomisp/pci/atomisp2/css2400/hive_isp_css_common/host/system_local.h:62:26: warning: 'DDR_BASE' defined but not used [-Wunused-const-variable=] At the end, it causes our build to fail, impacting our workflow. So, remove this crap. If one wants to force -Werror, he can still build with it enabled by passing a parameter to make. Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
- 29 May, 2017 1 commit
-
-
Linus Torvalds authored
-
- 28 May, 2017 1 commit
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermalLinus Torvalds authored
Pull thermal SoC management fixes from Eduardo Valentin: - fixes to TI SoC driver, Broadcom, qoriq - small sparse warning fix on thermal core * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal: thermal: broadcom: ns-thermal: default on iProc SoCs ti-soc-thermal: Fix a typo in a comment line ti-soc-thermal: Delete error messages for failed memory allocations in ti_bandgap_build() ti-soc-thermal: Use devm_kcalloc() in ti_bandgap_build() thermal: core: make thermal_emergency_poweroff static thermal: qoriq: remove useless call for of_thermal_get_trip_points()
-
- 27 May, 2017 14 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds authored
Pull tty/serial fixes from Greg KH: "Here are some serial and tty fixes for 4.12-rc3. They are a bit bigger than normal, which is why I had them bake in linux-next for a few weeks and didn't send them to you for -rc2. They revert a few of the serdev patches from 4.12-rc1, and bring things back to how they were in 4.11, to try to make things a bit more stable there. Rob and Johan both agree that this is the way forward, so this isn't people squabbling over semantics. Other than that, just a few minor serial driver fixes that people have had problems with. All of these have been in linux-next for a few weeks with no reported issues" * tag 'tty-4.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: serial: altera_uart: call iounmap() at driver remove serial: imx: ensure UCR3 and UFCR are setup correctly MAINTAINERS/serial: Change maintainer of jsm driver serial: enable serdev support tty/serdev: add serdev registration interface serdev: Restore serdev_device_write_buf for atomic context serial: core: fix crash in uart_suspend_port tty: fix port buffer locking tty: ehv_bytechan: clean up init error handling serial: ifx6x60: fix use-after-free on module unload serial: altera_jtaguart: adding iounmap() serial: exar: Fix stuck MSIs serial: efm32: Fix parity management in 'efm32_uart_console_get_options()' serdev: fix tty-port client deregistration Revert "tty_port: register tty ports with serdev bus" drivers/tty: 8250: only call fintek_8250_probe when doing port I/O
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fixes from Michael Ellerman: "Fix running SPU programs on Cell, and a few other minor fixes. Thanks to Alistair Popple, Jeremy Kerr, Michael Neuling, Nicholas Piggin" * tag 'powerpc-4.12-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc: Add PPC_FEATURE userspace bits for SCV and DARN instructions powerpc/spufs: Fix hash faults for kernel regions powerpc: Fix booting P9 hash with CONFIG_PPC_RADIX_MMU=N powerpc/powernv/npu-dma.c: Fix opal_npu_destroy_context() call selftests/powerpc: Fix TM resched DSCR test with some compilers
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Thomas Gleixner: "A series of fixes for X86: - The final fix for the end-of-stack issue in the unwinder - Handle non PAT systems gracefully - Prevent access to uninitiliazed memory - Move early delay calaibration after basic init - Fix Kconfig help text - Fix a cross compile issue - Unbreak older make versions" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/timers: Move simple_udelay_calibration past init_hypervisor_platform x86/alternatives: Prevent uninitialized stack byte read in apply_alternatives() x86/PAT: Fix Xorg regression on CPUs that don't support PAT x86/watchdog: Fix Kconfig help text file path reference to lockup watchdog documentation x86/build: Permit building with old make versions x86/unwind: Add end-of-stack check for ftrace handlers Revert "x86/entry: Fix the end of the stack for newly forked tasks" x86/boot: Use CROSS_COMPILE prefix for readelf
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer fixlet from Thomas Gleixner: "Silence dmesg spam by making the posix cpu timer printks depend on print_fatal_signals" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: posix-timers: Make signal printks conditional
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull RAS fixes from Thomas Gleixner: "Two fixlets for RAS: - Export memory_error() so the NFIT module can utilize it - Handle memory errors in NFIT correctly" * 'ras-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: acpi, nfit: Fix the memory error check in nfit_handle_mce() x86/MCE: Export memory_error()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf tooling fixes from Thomas Gleixner: - Synchronization of tools and kernel headers - A series of fixes for perf report addressing various failures: * Handle invalid maps proper * Plug a memory leak * Handle frames and callchain order correctly - Fixes for handling inlines and children mode * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: tools/include: Sync kernel ABI headers with tooling headers perf tools: Put caller above callee in --children mode perf report: Do not drop last inlined frame perf report: Always honor callchain order for inlined nodes perf script: Add --inline option for debugging perf report: Fix off-by-one for non-activation frames perf report: Fix memory leak in addr2line when called by addr2inlines perf report: Don't crash on invalid maps in `-g srcline` mode
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull locking fix from Thomas Gleixner: "A fix for a state leak which was introduced in the recent rework of futex/rtmutex interaction" * 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: futex,rt_mutex: Fix rt_mutex_cleanup_proxy_lock()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull kthread fix from Thomas Gleixner: "A single fix which prevents a use after free when kthread fork fails" * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: kthread: Fix use-after-free if kthread fork fails
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-traceLinus Torvalds authored
Pull ftrace fixes from Steven Rostedt: "There's been a few memory issues found with ftrace. One was simply a memory leak where not all was being freed that should have been in releasing a file pointer on set_graph_function. Then Thomas found that the ftrace trampolines were marked for read/write as well as execute. To shrink the possible attack surface, he added calls to set them to ro. Which also uncovered some other issues with freeing module allocated memory that had its permissions changed. Kprobes had a similar issue which is fixed and a selftest was added to trigger that issue again" * tag 'trace-v4.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: x86/ftrace: Make sure that ftrace trampolines are not RWX x86/mm/ftrace: Do not bug in early boot on irqs_disabled in cpu_flush_range() selftests/ftrace: Add a testcase for many kprobe events kprobes/x86: Fix to set RWX bits correctly before releasing trampoline ftrace: Fix memory leak in ftrace_graph_release()
-
Thomas Gleixner authored
ftrace use module_alloc() to allocate trampoline pages. The mapping of module_alloc() is RWX, which makes sense as the memory is written to right after allocation. But nothing makes these pages RO after writing to them. Add proper set_memory_rw/ro() calls to protect the trampolines after modification. Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1705251056410.1862@nanosSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org>
-
Steven Rostedt (VMware) authored
With function tracing starting in early bootup and having its trampoline pages being read only, a bug triggered with the following: kernel BUG at arch/x86/mm/pageattr.c:189! invalid opcode: 0000 [#1] SMP Modules linked in: CPU: 0 PID: 0 Comm: swapper Not tainted 4.12.0-rc2-test+ #3 Hardware name: MSI MS-7823/CSM-H87M-G43 (MS-7823), BIOS V1.6 02/22/2014 task: ffffffffb4222500 task.stack: ffffffffb4200000 RIP: 0010:change_page_attr_set_clr+0x269/0x302 RSP: 0000:ffffffffb4203c88 EFLAGS: 00010046 RAX: 0000000000000046 RBX: 0000000000000000 RCX: 00000001b6000000 RDX: ffffffffb4203d40 RSI: 0000000000000000 RDI: ffffffffb4240d60 RBP: ffffffffb4203d18 R08: 00000001b6000000 R09: 0000000000000001 R10: ffffffffb4203aa8 R11: 0000000000000003 R12: ffffffffc029b000 R13: ffffffffb4203d40 R14: 0000000000000001 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff9a639ea00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffff9a636b384000 CR3: 00000001ea21d000 CR4: 00000000000406b0 Call Trace: change_page_attr_clear+0x1f/0x21 set_memory_ro+0x1e/0x20 arch_ftrace_update_trampoline+0x207/0x21c ? ftrace_caller+0x64/0x64 ? 0xffffffffc029b000 ftrace_startup+0xf4/0x198 register_ftrace_function+0x26/0x3c function_trace_init+0x5e/0x73 tracer_init+0x1e/0x23 tracing_set_tracer+0x127/0x15a register_tracer+0x19b/0x1bc init_function_trace+0x90/0x92 early_trace_init+0x236/0x2b3 start_kernel+0x200/0x3f5 x86_64_start_reservations+0x29/0x2b x86_64_start_kernel+0x17c/0x18f secondary_startup_64+0x9f/0x9f ? secondary_startup_64+0x9f/0x9f Interrupts should not be enabled at this early in the boot process. It is also fine to leave interrupts enabled during this time as there's only one CPU running, and on_each_cpu() means to only run on the current CPU. If early_boot_irqs_disabled is set, it is safe to run cpu_flush_range() with interrupts disabled. Don't trigger a BUG_ON() in that case. Link: http://lkml.kernel.org/r/20170526093717.0be3b849@gandalf.local.homeSuggested-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org>
-
Masami Hiramatsu authored
Add a testcase to test kprobes via ftrace interface with many concurrent kprobe events. This tries to add many kprobe events (up to 256) on kernel functions. To avoid making ftrace-based kprobes (kprobes on fentry), it skips first N bytes (on x86 N=5, on ppc or arm N=4) of function entry. After that, it enables all those events, disable it, and remove it. Since the unoptimization buffer reclaiming will be delayed, after removing events, it will wait enough time. Link: http://lkml.kernel.org/r/149577388470.11702.11832460851769204511.stgit@devboxSigned-off-by:
Masami Hiramatsu <mhiramat@kernel.org> Suggested-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org>
-
Masami Hiramatsu authored
Fix kprobes to set(recover) RWX bits correctly on trampoline buffer before releasing it. Releasing readonly page to module_memfree() crash the kernel. Without this fix, if kprobes user register a bunch of kprobes in function body (since kprobes on function entry usually use ftrace) and unregister it, kernel hits a BUG and crash. Link: http://lkml.kernel.org/r/149570868652.3518.14120169373590420503.stgit@devboxSigned-off-by:
Masami Hiramatsu <mhiramat@kernel.org> Fixes: d0381c81 ("kprobes/x86: Set kprobes pages read-only") Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org>
-
Luis Henriques authored
ftrace_hash is being kfree'ed in ftrace_graph_release(), however the ->buckets field is not. This results in a memory leak that is easily captured by kmemleak: unreferenced object 0xffff880038afe000 (size 8192): comm "trace-cmd", pid 238, jiffies 4294916898 (age 9.736s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff815f561e>] kmemleak_alloc+0x4e/0xb0 [<ffffffff8113964d>] __kmalloc+0x12d/0x1a0 [<ffffffff810bf6d1>] alloc_ftrace_hash+0x51/0x80 [<ffffffff810c0523>] __ftrace_graph_open.isra.39.constprop.46+0xa3/0x100 [<ffffffff810c05e8>] ftrace_graph_open+0x68/0xa0 [<ffffffff8114003d>] do_dentry_open.isra.1+0x1bd/0x2d0 [<ffffffff81140df7>] vfs_open+0x47/0x60 [<ffffffff81150f95>] path_openat+0x2a5/0x1020 [<ffffffff81152d6a>] do_filp_open+0x8a/0xf0 [<ffffffff811411df>] do_sys_open+0x12f/0x200 [<ffffffff811412ce>] SyS_open+0x1e/0x20 [<ffffffff815fa6e0>] entry_SYSCALL_64_fastpath+0x13/0x94 [<ffffffffffffffff>] 0xffffffffffffffff Link: http://lkml.kernel.org/r/20170525152038.7661-1-lhenriques@suse.com Cc: stable@vger.kernel.org Fixes: b9b0c831 ("ftrace: Convert graph filter to use hash tables") Signed-off-by:
Luis Henriques <lhenriques@suse.com> Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org>
-
- 26 May, 2017 10 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds authored
Pull input layer fixes from Dmitry Torokhov: "Just a few fixups to a couple of drivers" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: elan_i2c - ignore signals when finishing updating firmware Input: elan_i2c - clear INT before resetting controller Input: atmel_mxt_ts - add T100 as a readable object Input: edt-ft5x06 - increase allowed data range for threshold parameter
-
Linus Torvalds authored
Merge tag 'led_fixes_for_4-12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds Pull LED fix from Jacek Anaszewski: "A single LED fix for 4.12-rc3. leds-pca955x driver uses only i2c_smbus API and thus it should pass I2C_FUNC_SMBUS_BYTE_DATA flag to i2c_check_functionality" * tag 'led_fixes_for_4-12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds: leds: pca955x: Correct I2C Functionality
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Fix state pruning in bpf verifier wrt. alignment, from Daniel Borkmann. 2) Handle non-linear SKBs properly in SCTP ICMP parsing, from Davide Caratti. 3) Fix bit field definitions for rss_hash_type of descriptors in mlx5 driver, from Jesper Brouer. 4) Defer slave->link updates until bonding is ready to do a full commit to the new settings, from Nithin Sujir. 5) Properly reference count ipv4 FIB metrics to avoid use after free situations, from Eric Dumazet and several others including Cong Wang and Julian Anastasov. 6) Fix races in llc_ui_bind(), from Lin Zhang. 7) Fix regression of ESP UDP encapsulation for TCP packets, from Steffen Klassert. 8) Fix mdio-octeon driver Kconfig deps, from Randy Dunlap. 9) Fix regression in setting DSCP on ipv6/GRE encapsulation, from Peter Dawson. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (43 commits) ipv4: add reference counting to metrics net: ethernet: ax88796: don't call free_irq without request_irq first ip6_tunnel, ip6_gre: fix setting of DSCP on encapsulated packets sctp: fix ICMP processing if skb is non-linear net: llc: add lock_sock in llc_ui_bind to avoid a race condition bonding: Don't update slave->link until ready to commit test_bpf: Add a couple of tests for BPF_JSGE. bpf: add various verifier test cases bpf: fix wrong exposure of map_flags into fdinfo for lpm bpf: add bpf_clone_redirect to bpf_helper_changes_pkt_data bpf: properly reset caller saved regs after helper call and ld_abs/ind bpf: fix incorrect pruning decision when alignment must be tracked arp: fixed -Wuninitialized compiler warning tcp: avoid fastopen API to be used on AF_UNSPEC net: move somaxconn init from sysctl code net: fix potential null pointer dereference geneve: fix fill_info when using collect_metadata virtio-net: enable TSO/checksum offloads for Q-in-Q vlans be2net: Fix offload features for Q-in-Q packets vlan: Fix tcp checksum offloads in Q-in-Q vlans ...
-
git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds authored
Pull XFS fixes from Darrick Wong: "A few miscellaneous bug fixes & cleanups: - Fix indlen block reservation accounting bug when splitting delalloc extent - Fix warnings about unused variables that appeared in -rc1. - Don't spew errors when bmapping a local format directory - Fix an off-by-one error in a delalloc eof assertion - Make fsmap only return inode information for CAP_SYS_ADMIN - Fix a potential mount time deadlock recovering cow extents - Fix unaligned memory access in _btree_visit_blocks - Fix various SEEK_HOLE/SEEK_DATA bugs" * tag 'xfs-4.12-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: Move handling of missing page into one place in xfs_find_get_desired_pgoff() xfs: Fix off-by-in in loop termination in xfs_find_get_desired_pgoff() xfs: Fix missed holes in SEEK_HOLE implementation xfs: fix off-by-one on max nr_pages in xfs_find_get_desired_pgoff() xfs: fix unaligned access in xfs_btree_visit_blocks xfs: avoid mount-time deadlock in CoW extent recovery xfs: only return detailed fsmap info if the caller has CAP_SYS_ADMIN xfs: bad assertion for delalloc an extent that start at i_size xfs: fix warnings about unused stack variables xfs: BMAPX shouldn't barf on inline-format directories xfs: fix indlen accounting error on partial delalloc conversion
-
Eric Dumazet authored
Andrey Konovalov reported crashes in ipv4_mtu() I could reproduce the issue with KASAN kernels, between 10.246.7.151 and 10.246.7.152 : 1) 20 concurrent netperf -t TCP_RR -H 10.246.7.152 -l 1000 & 2) At the same time run following loop : while : do ip ro add 10.246.7.152 dev eth0 src 10.246.7.151 mtu 1500 ip ro del 10.246.7.152 dev eth0 src 10.246.7.151 mtu 1500 done Cong Wang attempted to add back rt->fi in commit 82486aa6 ("ipv4: restore rt->fi for reference counting") but this proved to add some issues that were complex to solve. Instead, I suggested to add a refcount to the metrics themselves, being a standalone object (in particular, no reference to other objects) I tried to make this patch as small as possible to ease its backport, instead of being super clean. Note that we believe that only ipv4 dst need to take care of the metric refcount. But if this is wrong, this patch adds the basic infrastructure to extend this to other families. Many thanks to Julian Anastasov for reviewing this patch, and Cong Wang for his efforts on this problem. Fixes: 2860583f ("ipv4: Kill rt->fi") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
Andrey Konovalov <andreyknvl@google.com> Reviewed-by:
Julian Anastasov <ja@ssi.bg> Acked-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Uwe Kleine-König authored
The function ax_init_dev (which is called only from the driver's .probe function) calls free_irq in the error path without having requested the irq in the first place. So drop the free_irq call in the error path. Fixes: 825a2ff1 ("AX88796 network driver") Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Peter Dawson authored
This fix addresses two problems in the way the DSCP field is formulated on the encapsulating header of IPv6 tunnels. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=195661 1) The IPv6 tunneling code was manipulating the DSCP field of the encapsulating packet using the 32b flowlabel. Since the flowlabel is only the lower 20b it was incorrect to assume that the upper 12b containing the DSCP and ECN fields would remain intact when formulating the encapsulating header. This fix handles the 'inherit' and 'fixed-value' DSCP cases explicitly using the extant dsfield u8 variable. 2) The use of INET_ECN_encapsulate(0, dsfield) in ip6_tnl_xmit was incorrect and resulted in the DSCP value always being set to 0. Commit 90427ef5 ("ipv6: fix flow labels when the traffic class is non-0") caused the regression by masking out the flowlabel which exposed the incorrect handling of the DSCP portion of the flowlabel in ip6_tunnel and ip6_gre. Fixes: 90427ef5 ("ipv6: fix flow labels when the traffic class is non-0") Signed-off-by:
Peter Dawson <peter.a.dawson@boeing.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Davide Caratti authored
sometimes ICMP replies to INIT chunks are ignored by the client, even if the encapsulated SCTP headers match an open socket. This happens when the ICMP packet is carried by a paged skb: use skb_header_pointer() to read packet contents beyond the SCTP header, so that chunk header and initiate tag are validated correctly. v2: - don't use skb_header_pointer() to read the transport header, since icmp_socket_deliver() already puts these 8 bytes in the linear area. - change commit message to make specific reference to INIT chunks. Signed-off-by:
Davide Caratti <dcaratti@redhat.com> Acked-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by:
Vlad Yasevich <vyasevich@gmail.com> Reviewed-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
linzhang authored
There is a race condition in llc_ui_bind if two or more processes/threads try to bind a same socket. If more processes/threads bind a same socket success that will lead to two problems, one is this action is not what we expected, another is will lead to kernel in unstable status or oops(in my simple test case, cause llc2.ko can't unload). The current code is test SOCK_ZAPPED bit to avoid a process to bind a same socket twice but that is can't avoid more processes/threads try to bind a same socket at the same time. So, add lock_sock in llc_ui_bind like others, such as llc_ui_connect. Signed-off-by:
Lin Zhang <xiaolou4617@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fixes from Jens Axboe: "A collection of fixes that should go into this series. This contains: - A set of NVMe fixes, pulled from Christoph. This includes a set of fixes for the fiber channel bits from James Smart, rdma queue depth fix from Marta, controller removal fixes from Ming, and some more APST quirk updates from Andy. - A blk-mq debugfs fix from Bart, fixing a problem with the untangling of the sysfs and debugfs blk-mq bits that was added in this series. - Error code fix in add_partition() from Dan. - A small series of fixes for the new blk-throttle code from Shaohua" * 'for-linus' of git://git.kernel.dk/linux-block: (21 commits) blk-mq: Only register debugfs attributes for blk-mq queues nvme: Quirk APST on Intel 600P/P3100 devices nvme: only setup block integrity if supported by the driver nvme: replace is_flags field in nvme_ctrl_ops with a flags field nvme-pci: consistencly use ctrl->device for logging partitions/msdos: FreeBSD UFS2 file systems are not recognized block: fix an error code in add_partition() blk-throttle: force user to configure all settings for io.low blk-throttle: respect 0 bps/iops settings for io.low blk-throttle: output some debug info in trace blk-throttle: add hierarchy support for latency target and idle time nvme_fc: remove extra controller reference taken on reconnect nvme_fc: correct nvme status set on abort nvme_fc: set logging level on resets/deletes nvme_fc: revise comment on teardown nvme_fc: Support ctrl_loss_tmo nvme_fc: get rid of local reconnect_delay blk-mq: remove blk_mq_abort_requeue_list() nvme: avoid to use blk_mq_abort_requeue_list() nvme: use blk_mq_start_hw_queues() in nvme_kill_queues() ...
-