- 27 Aug, 2016 40 commits
-
-
Ben Hutchings authored
commit bca014ca upstream. Signing a module should only make it trusted by the specific kernel it was built for, not anything else. Loading a signed module meant for a kernel with a different ABI could have interesting effects. Therefore, treat all signatures as invalid when a module is force-loaded. Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
Rusty Russell <rusty@rustcorp.com.au> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Willy Tarreau <w@1wt.eu>
-
Mike Snitzer authored
commit 99f3c90d upstream. When the corrupt_bio_byte feature was introduced it caused READ bios to no longer be errored with -EIO during the down_interval. This had to do with the complexity of needing to submit READs if the corrupt_bio_byte feature was used. Fix it so READ bios are properly errored with -EIO; doing so early in flakey_map() as long as there isn't a match for the corrupt_bio_byte feature. Fixes: a3998799 ("dm flakey: add corrupt_bio_byte feature") Reported-by:
Akira Hayakawa <ruby.wktk@gmail.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Iosif Harutyunov authored
commit 714fb87e upstream. Install the UBI device object before we arm sysfs. Otherwise udev tries to read sysfs attributes before UBI is ready and udev rules will not match. Cc: <stable@vger.kernel.org> Signed-off-by:
Iosif Harutyunov <iharutyunov@sonicwall.com> [rw: massaged commit message] Signed-off-by:
Richard Weinberger <richard@nod.at> Signed-off-by:
-
Richard Weinberger authored
commit 4946784b upstream. When the volume resize operation shrinks a volume, LEBs will be unmapped. Since unmapping will not erase these LEBs immediately we have to wait for that operation to finish. Otherwise in case of a power cut right after writing the new volume table the UBI attach process can find more LEBs than the volume table knows. This will render the UBI image unattachable. Fix this issue by waiting for erase to complete and write the new volume table afterward. Cc: <stable@vger.kernel.org> Reported-by:
Boris Brezillon <boris.brezillon@free-electrons.com> Reviewed-by:
-
James Hogan authored
commit 6154c187 upstream. The LNKGET based atomic sequence in __cmpxchg_u32 has slightly incorrect constraints for the return value which under certain circumstances can allow an address unit register to be used as the first operand of a CMP instruction. This isn't a valid instruction however as the encodings only allow a data unit to be specified. This would result in an assembler error like the following: Error: failed to assemble instruction: "CMP A0.2,D0Ar6" Fix by changing the constraint from "=&da" (assigned, early clobbered, data or address unit register) to "=&d" (data unit register only). The constraint for the second operand, "bd" (an op2 register where op1 is a data unit register and the instruction supports O2R) is already correct assuming the first operand is a data unit register. Other cases of CMP in inline asm have had their constraints checked, and appear to all be fine. Fixes: 6006c0d8 ("metag: Atomics, locks and bitops") Signed-off-by:
James Hogan <james.hogan@imgtec.com> Cc: linux-metag@vger.kernel.org Cc: <stable@vger.kernel.org> # 3.9.x- Signed-off-by:
-
Laura Abbott authored
commit b2e1c26f upstream. glibc recently did a sync up (94e73c95d9b5 "elf.h: Sync with the gabi webpage") that added a #define for EM_METAG but did not add relocations This triggers build errors: scripts/recordmcount.c: In function 'do_file': scripts/recordmcount.c:466:28: error: 'R_METAG_ADDR32' undeclared (first use in this function) case EM_METAG: reltype = R_METAG_ADDR32; ^~~~~~~~~~~~~~ scripts/recordmcount.c:466:28: note: each undeclared identifier is reported only once for each function it appears in scripts/recordmcount.c:468:20: error: 'R_METAG_NONE' undeclared (first use in this function) rel_type_nop = R_METAG_NONE; ^~~~~~~~~~~~ Work around this change with some more #ifdefery for the relocations. Fedora Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1354034 Link: http://lkml.kernel.org/r/1468005530-14757-1-git-send-email-labbott@redhat.com Cc: stable@vger.kernel.org # v3.9+ Cc: James Hogan <james.hogan@imgtec.com> Fixes: 00512bdd ("metag: ftrace support") Reported-by:
Ross Burton <ross.burton@intel.com> Signed-off-by:
Laura Abbott <labbott@redhat.com> Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
Konstantin Neumoin authored
commit 37cf99e0 upstream. The balloon has a special mechanism that is subscribed to the oom notification which leads to deflation for a fixed number of pages. The number is always fixed even when the balloon is fully deflated. But leak_balloon did not expect that the pages to deflate will be more than taken, and raise a "BUG" in balloon_page_dequeue when page list will be empty. So, the simplest solution would be to check that the number of releases pages is less or equal to the number taken pages. Cc: stable@vger.kernel.org Signed-off-by:
Konstantin Neumoin <kneumoin@virtuozzo.com> Signed-off-by:
Denis V. Lunev <den@openvz.org> CC: Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
-
Paul Moore authored
commit 0e0e3677 upstream. It seems risky to always rely on the caller to ensure the socket's address family is correct before passing it to the NetLabel kAPI, especially since we see at least one LSM which didn't. Add address family checks to the *_delattr() functions to help prevent future problems. Cc: <stable@vger.kernel.org> Reported-by:
Maninder Singh <maninder1.s@samsung.com> Signed-off-by:
Paul Moore <paul@paul-moore.com> Signed-off-by:
-
Sachin Prabhu authored
commit 8d9535b6 upstream. When opening a file with O_CREAT flag, check to see if the file opened is an existing directory. This prevents the directory from being opened which subsequently causes a crash when the close function for directories cifs_closedir() is called which frees up the file->private_data memory while the file is still listed on the open file list for the tcon. Signed-off-by:
Sachin Prabhu <sprabhu@redhat.com> Signed-off-by:
Steve French <smfrench@gmail.com> CC: Stable <stable@vger.kernel.org> Reported-by:
Xiaoli Feng <xifeng@redhat.com> Signed-off-by:
-
Amadeusz S�awi�ski authored
commit 23bc6ab0 upstream. When we retrieve imtu value from userspace we should use 16 bit pointer cast instead of 32 as it's defined that way in headers. Fixes setsockopt calls on big-endian platforms. Signed-off-by:
Amadeusz SÅawiÅski <amadeusz.slawinski@tieto.com> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Cc: stable@vger.kernel.org Signed-off-by:
-
Javier Martinez Canillas authored
commit 6311f126 upstream. When s5p_mfc_remove() calls put_device() for the reserved memory region devs, the driver core warns that the dev doesn't have a release callback: WARNING: CPU: 0 PID: 591 at drivers/base/core.c:251 device_release+0x8c/0x90 Device 's5p-mfc-l' does not have a release() function, it is broken and must be fixed. Also, the declared DMA memory using dma_declare_coherent_memory() isn't relased so add a dev .release that calls dma_release_declared_memory(). Cc: <stable@vger.kernel.org> Fixes: 6e83e6e2 ("[media] s5p-mfc: Fix kernel warning on memory init") Signed-off-by:
Javier Martinez Canillas <javier@osg.samsung.com> Tested-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
-
Javier Martinez Canillas authored
commit 29debab0 upstream. The devices don't have a name set, so makes dev_name() returns NULL which makes harder to identify the devices that are causing issues, for example: WARNING: CPU: 2 PID: 616 at drivers/base/core.c:251 device_release+0x8c/0x90 Device '(null)' does not have a release() function, it is broken and must be fixed. And after setting the device name: WARNING: CPU: 0 PID: 591 at drivers/base/core.c:251 device_release+0x8c/0x90 Device 's5p-mfc-l' does not have a release() function, it is broken and must be fixed. Cc: <stable@vger.kernel.org> Fixes: 6e83e6e2 ("[media] s5p-mfc: Fix kernel warning on memory init") Signed-off-by:
-
Alex Hung authored
commit fc8a601e upstream. Several users reported wifi cannot be unblocked as discussed in [1]. This patch removes the use of the 2009 flag by BIOS but uses the actual WMI function calls - it will be skipped if WMI reports unsupported. [1] https://bugzilla.kernel.org/show_bug.cgi?id=69131Signed-off-by:
Alex Hung <alex.hung@canonical.com> Tested-by:
Evgenii Shatokhin <eugene.shatokhin@yandex.ru> Signed-off-by:
Darren Hart <dvhart@linux.intel.com> Signed-off-by:
-
Vignesh R authored
commit a246b819 upstream. NBANK() macro assumes that ngpios is a multiple of 8(BANK_SZ) and hence results in 0 banks for PCA9536 which has just 4 gpios. This is wrong as PCA9356 has 1 bank with 4 gpios. This results in uninitialized PCA953X_INVERT register. Fix this by using DIV_ROUND_UP macro in NBANK(). Cc: stable@vger.kernel.org Signed-off-by:
Vignesh R <vigneshr@ti.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Vegard Nossum authored
commit d3e6952c upstream. I ran into this: kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] PREEMPT SMP KASAN CPU: 2 PID: 2012 Comm: trinity-c3 Not tainted 4.7.0-rc7+ #19 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 task: ffff8800b745f2c0 ti: ffff880111740000 task.ti: ffff880111740000 RIP: 0010:[<ffffffff82bbf066>] [<ffffffff82bbf066>] irttp_connect_request+0x36/0x710 RSP: 0018:ffff880111747bb8 EFLAGS: 00010286 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000069dd8358 RDX: 0000000000000009 RSI: 0000000000000027 RDI: 0000000000000048 RBP: ffff880111747c00 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000069dd8358 R11: 1ffffffff0759723 R12: 0000000000000000 R13: ffff88011a7e4780 R14: 0000000000000027 R15: 0000000000000000 FS: 00007fc738404700(0000) GS:ffff88011af00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fc737fdfb10 CR3: 0000000118087000 CR4: 00000000000006e0 Stack: 0000000000000200 ffff880111747bd8 ffffffff810ee611 ffff880119f1f220 ffff880119f1f4f8 ffff880119f1f4f0 ffff88011a7e4780 ffff880119f1f232 ffff880119f1f220 ffff880111747d58 ffffffff82bca542 0000000000000000 Call Trace: [<ffffffff82bca542>] irda_connect+0x562/0x1190 [<ffffffff825ae582>] SYSC_connect+0x202/0x2a0 [<ffffffff825b4489>] SyS_connect+0x9/0x10 [<ffffffff8100334c>] do_syscall_64+0x19c/0x410 [<ffffffff83295ca5>] entry_SYSCALL64_slow_path+0x25/0x25 Code: 41 89 ca 48 89 e5 41 57 41 56 41 55 41 54 41 89 d7 53 48 89 fb 48 83 c7 48 48 89 fa 41 89 f6 48 c1 ea 03 48 83 ec 20 4c 8b 65 10 <0f> b6 04 02 84 c0 74 08 84 c0 0f 8e 4c 04 00 00 80 7b 48 00 74 RIP [<ffffffff82bbf066>] irttp_connect_request+0x36/0x710 RSP <ffff880111747bb8> ---[ end trace 4cda2588bc055b30 ]--- The problem is that irda_open_tsap() can fail and leave self->tsap = NULL, and then irttp_connect_request() almost immediately dereferences it. Cc: stable@vger.kernel.org Signed-off-by:
Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Wei Fang authored
commit 9446385f upstream. FUSE_HAS_IOCTL_DIR should be assigned to ->flags, it may be a typo. Signed-off-by:
Wei Fang <fangwei1@huawei.com> Signed-off-by:
Miklos Szeredi <mszeredi@redhat.com> Fixes: 69fe05c9 ("fuse: add missing INIT flags") Cc: <stable@vger.kernel.org> Signed-off-by:
-
Vegard Nossum authored
commit 77da1605 upstream. I got a KASAN report of use-after-free: ================================================================== BUG: KASAN: use-after-free in klist_iter_exit+0x61/0x70 at addr ffff8800b6581508 Read of size 8 by task trinity-c1/315 ============================================================================= BUG kmalloc-32 (Not tainted): kasan: bad access detected ----------------------------------------------------------------------------- Disabling lock debugging due to kernel taint INFO: Allocated in disk_seqf_start+0x66/0x110 age=144 cpu=1 pid=315 ___slab_alloc+0x4f1/0x520 __slab_alloc.isra.58+0x56/0x80 kmem_cache_alloc_trace+0x260/0x2a0 disk_seqf_start+0x66/0x110 traverse+0x176/0x860 seq_read+0x7e3/0x11a0 proc_reg_read+0xbc/0x180 do_loop_readv_writev+0x134/0x210 do_readv_writev+0x565/0x660 vfs_readv+0x67/0xa0 do_preadv+0x126/0x170 SyS_preadv+0xc/0x10 do_syscall_64+0x1a1/0x460 return_from_SYSCALL_64+0x0/0x6a INFO: Freed in disk_seqf_stop+0x42/0x50 age=160 cpu=1 pid=315 __slab_free+0x17a/0x2c0 kfree+0x20a/0x220 disk_seqf_stop+0x42/0x50 traverse+0x3b5/0x860 seq_read+0x7e3/0x11a0 proc_reg_read+0xbc/0x180 do_loop_readv_writev+0x134/0x210 do_readv_writev+0x565/0x660 vfs_readv+0x67/0xa0 do_preadv+0x126/0x170 SyS_preadv+0xc/0x10 do_syscall_64+0x1a1/0x460 return_from_SYSCALL_64+0x0/0x6a CPU: 1 PID: 315 Comm: trinity-c1 Tainted: G B 4.7.0+ #62 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 ffffea0002d96000 ffff880119b9f918 ffffffff81d6ce81 ffff88011a804480 ffff8800b6581500 ffff880119b9f948 ffffffff8146c7bd ffff88011a804480 ffffea0002d96000 ffff8800b6581500 fffffffffffffff4 ffff880119b9f970 Call Trace: [<ffffffff81d6ce81>] dump_stack+0x65/0x84 [<ffffffff8146c7bd>] print_trailer+0x10d/0x1a0 [<ffffffff814704ff>] object_err+0x2f/0x40 [<ffffffff814754d1>] kasan_report_error+0x221/0x520 [<ffffffff8147590e>] __asan_report_load8_noabort+0x3e/0x40 [<ffffffff83888161>] klist_iter_exit+0x61/0x70 [<ffffffff82404389>] class_dev_iter_exit+0x9/0x10 [<ffffffff81d2e8ea>] disk_seqf_stop+0x3a/0x50 [<ffffffff8151f812>] seq_read+0x4b2/0x11a0 [<ffffffff815f8fdc>] proc_reg_read+0xbc/0x180 [<ffffffff814b24e4>] do_loop_readv_writev+0x134/0x210 [<ffffffff814b4c45>] do_readv_writev+0x565/0x660 [<ffffffff814b8a17>] vfs_readv+0x67/0xa0 [<ffffffff814b8de6>] do_preadv+0x126/0x170 [<ffffffff814b92ec>] SyS_preadv+0xc/0x10 This problem can occur in the following situation: open() - pread() - .seq_start() - iter = kmalloc() // succeeds - seqf->private = iter - .seq_stop() - kfree(seqf->private) - pread() - .seq_start() - iter = kmalloc() // fails - .seq_stop() - class_dev_iter_exit(seqf->private) // boom! old pointer As the comment in disk_seqf_stop() says, stop is called even if start failed, so we need to reinitialise the private pointer to NULL when seq iteration stops. An alternative would be to set the private pointer to NULL when the kmalloc() in disk_seqf_start() fails. Cc: stable@vger.kernel.org Signed-off-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
Jens Axboe <axboe@fb.com> Signed-off-by:
-
James Bottomley authored
commit a621bac3 upstream. When SCSI was written, all commands coming from the filesystem (REQ_TYPE_FS commands) had data. This meant that our signal for needing to complete the command was the number of bytes completed being equal to the number of bytes in the request. Unfortunately, with the advent of flush barriers, we can now get zero length REQ_TYPE_FS commands, which confuse this logic because they satisfy the condition every time. This means they never get retried even for retryable conditions, like UNIT ATTENTION because we complete them early assuming they're done. Fix this by special casing the early completion condition to recognise zero length commands with errors and let them drop through to the retry code. Reported-by:
Sebastian Parschauer <s.parschauer@gmx.de> Signed-off-by:
James E.J. Bottomley <jejb@linux.vnet.ibm.com> Tested-by:
Jack Wang <jinpu.wang@profitbricks.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> [ jwang: backport from upstream 4.7 to fix scsi resize issue ] Signed-off-by:
-
David Howells authored
commit 20f06ed9 upstream. MIPS64 needs to use compat_sys_keyctl for 32-bit userspace rather than calling sys_keyctl. The latter will work in a lot of cases, thereby hiding the issue. Reported-by:
Stephan Mueller <smueller@chronox.de> Signed-off-by:
David Howells <dhowells@redhat.com> cc: stable@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: linux-security-module@vger.kernel.org Cc: keyrings@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13832/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
Andy Lutomirski authored
commit 4eaffdd5 upstream. My previous comments were still a bit confusing and there was a typo. Fix it up. Reported-by:
Peter Zijlstra <peterz@infradead.org> Signed-off-by:
Andy Lutomirski <luto@kernel.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Rik van Riel <riel@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Fixes: 71b3c126 ("x86/mm: Add barriers and document switch_mm()-vs-flush synchronization") Link: http://lkml.kernel.org/r/0a0b43cdcdd241c5faaaecfbcc91a155ddedc9a1.1452631609.git.luto@kernel.orgSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Karl Heiss authored
commit 635682a1 upstream. A case can occur when sctp_accept() is called by the user during a heartbeat timeout event after the 4-way handshake. Since sctp_assoc_migrate() changes both assoc->base.sk and assoc->ep, the bh_sock_lock in sctp_generate_heartbeat_event() will be taken with the listening socket but released with the new association socket. The result is a deadlock on any future attempts to take the listening socket lock. Note that this race can occur with other SCTP timeouts that take the bh_lock_sock() in the event sctp_accept() is called. BUG: soft lockup - CPU#9 stuck for 67s! [swapper:0] ... RIP: 0010:[<ffffffff8152d48e>] [<ffffffff8152d48e>] _spin_lock+0x1e/0x30 RSP: 0018:ffff880028323b20 EFLAGS: 00000206 RAX: 0000000000000002 RBX: ffff880028323b20 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff880028323be0 RDI: ffff8804632c4b48 RBP: ffffffff8100bb93 R08: 0000000000000000 R09: 0000000000000000 R10: ffff880610662280 R11: 0000000000000100 R12: ffff880028323aa0 R13: ffff8804383c3880 R14: ffff880028323a90 R15: ffffffff81534225 FS: 0000000000000000(0000) GS:ffff880028320000(0000) knlGS:0000000000000000 CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b CR2: 00000000006df528 CR3: 0000000001a85000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process swapper (pid: 0, threadinfo ffff880616b70000, task ffff880616b6cab0) Stack: ffff880028323c40 ffffffffa01c2582 ffff880614cfb020 0000000000000000 <d> 0100000000000000 00000014383a6c44 ffff8804383c3880 ffff880614e93c00 <d> ffff880614e93c00 0000000000000000 ffff8804632c4b00 ffff8804383c38b8 Call Trace: <IRQ> [<ffffffffa01c2582>] ? sctp_rcv+0x492/0xa10 [sctp] [<ffffffff8148c559>] ? nf_iterate+0x69/0xb0 [<ffffffff814974a0>] ? ip_local_deliver_finish+0x0/0x2d0 [<ffffffff8148c716>] ? nf_hook_slow+0x76/0x120 [<ffffffff814974a0>] ? ip_local_deliver_finish+0x0/0x2d0 [<ffffffff8149757d>] ? ip_local_deliver_finish+0xdd/0x2d0 [<ffffffff81497808>] ? ip_local_deliver+0x98/0xa0 [<ffffffff81496ccd>] ? ip_rcv_finish+0x12d/0x440 [<ffffffff81497255>] ? ip_rcv+0x275/0x350 [<ffffffff8145cfeb>] ? __netif_receive_skb+0x4ab/0x750 ... With lockdep debugging: ===================================== [ BUG: bad unlock balance detected! ] ------------------------------------- CslRx/12087 is trying to release lock (slock-AF_INET) at: [<ffffffffa01bcae0>] sctp_generate_timeout_event+0x40/0xe0 [sctp] but there are no more locks to release! other info that might help us debug this: 2 locks held by CslRx/12087: #0: (&asoc->timers[i]){+.-...}, at: [<ffffffff8108ce1f>] run_timer_softirq+0x16f/0x3e0 #1: (slock-AF_INET){+.-...}, at: [<ffffffffa01bcac3>] sctp_generate_timeout_event+0x23/0xe0 [sctp] Ensure the socket taken is also the same one that is released by saving a copy of the socket before entering the timeout event critical section. Signed-off-by:
Karl Heiss <kheiss@gmail.com> Signed-off-by:
-
Dmitri Epshtein authored
commit 06708f81 upstream. Commit aebea2ba ("net: mvneta: fix Tx interrupt delay") intended to set coalescing threshold to a value guaranteeing interrupt generation per each sent packet, so that buffers can be released with no delay. In fact setting threshold to '1' was wrong, because it causes interrupt every two packets. According to the documentation a reason behind it is following - interrupt occurs once sent buffers counter reaches a value, which is higher than one specified in MVNETA_TXQ_SIZE_REG(q). This behavior was confirmed during tests. Also when testing the SoC working as a NAS device, better performance was observed with int-per-packet, as it strongly depends on the fact that all transmitted packets are released immediately. This commit enables NETA controller work in interrupt per sent packet mode by setting coalescing threshold to 0. Signed-off-by:
Dmitri Epshtein <dima@marvell.com> Signed-off-by:
Marcin Wojtas <mw@semihalf.com> Cc: <stable@vger.kernel.org> # v3.10+ Fixes aebea2ba ("net: mvneta: fix Tx interrupt delay") Acked-by:
-
Brian King authored
commit 54e430bb upstream. If we fall back to using LSI on the Croc or Crocodile chip we need to clear the interrupt so we don't hang the system. Cc: <stable@vger.kernel.org> Tested-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
Brian King <brking@linux.vnet.ibm.com> Signed-off-by:
-
Oliver Hartkopp authored
commit 25e1ed6e upstream. For 'real' hardware CAN devices the netlink interface is used to set CAN specific communication parameters. Real CAN hardware can not be created nor removed with the ip tool ... This patch adds a private dellink function for the CAN device driver interface that does just nothing. It's a follow up to commit 993e6f2f ("can: fix oops caused by wrong rtnl newlink usage") but for dellink. Reported-by:
ajneu <ajneu1@gmail.com> Signed-off-by:
Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
-
Wolfgang Grandegger authored
commit 43200a44 upstream. At high bus load it could happen that "at91_poll()" enters with all RX message boxes filled up. If then at the end the "quota" is exceeded as well, "rx_next" will not be reset to the first RX mailbox and hence the interrupts remain disabled. Signed-off-by:
Wolfgang Grandegger <wg@grandegger.com> Tested-by:
Amr Bekhit <amrbekhit@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Taras Kondratiuk authored
commit f68381a7 upstream. The code that fills packed command header assumes that CPU runs in little-endian mode. Hence the header is malformed in big-endian mode and causes MMC data transfer errors: [ 563.200828] mmcblk0: error -110 transferring data, sector 2048, nr 8, cmd response 0x900, card status 0xc40 [ 563.219647] mmcblk0: packed cmd failed, nr 2, sectors 16, failure index: -1 Convert header data to LE. Signed-off-by:
Taras Kondratiuk <takondra@cisco.com> Fixes: ce39f9d1 ("mmc: support packed write command for eMMC4.5 devices") Cc: <stable@vger.kernel.org> Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Ursula Braun authored
commit 7831b4ff upstream. A qeth_card contains a napi_struct linked to the net_device during device probing. This struct must be deleted when removing the qeth device, otherwise Panic on oops can occur when qeth devices are repeatedly removed and added. Fixes: a1c3ed4c ("qeth: NAPI support for l2 and l3 discipline") Cc: stable@vger.kernel.org # v2.6.37+ Signed-off-by:
Ursula Braun <ubraun@linux.vnet.ibm.com> Tested-by:
Alexander Klein <ALKL@de.ibm.com> Signed-off-by:
-
Vineet Gupta authored
commit a6416f57 upstream. ARCompact and ARCv2 only have ASL, while binutils used to support LSL as a alias mnemonic. Newer binutils (upstream) don't want to do that so replace it. Signed-off-by:
Vineet Gupta <vgupta@synopsys.com> Signed-off-by:
-
Jeff Mahoney authored
commit f0fe970d upstream. There are legitimate reasons to disallow mmap on certain files, notably in sysfs or procfs. We shouldn't emulate mmap support on file systems that don't offer support natively. CVE-2016-1583 Signed-off-by:
Jeff Mahoney <jeffm@suse.com> [tyhicks: clean up f_op check by using ecryptfs_file_to_lower()] Signed-off-by:
Tyler Hicks <tyhicks@canonical.com> Signed-off-by:
-
Jeff Mahoney authored
commit 78c4e172 upstream. This reverts commit 2f36db71. It fixed a local root exploit but also introduced a dependency on the lower file system implementing an mmap operation just to open a file, which is a bit of a heavy hammer. The right fix is to have mmap depend on the existence of the mmap handler instead. Signed-off-by:
-
Andrey Grodzovsky authored
commit 02ef871e upstream. Current overlap check is evaluating to false a case where a filter field is fully contained (proper subset) of a r/w request. This change applies classical overlap check instead to include all the scenarios. More specifically, for (Hilscher GmbH CIFX 50E-DP(M/S)) device driver the logic is such that the entire confspace is read and written in 4 byte chunks. In this case as an example, CACHE_LINE_SIZE, LATENCY_TIMER and PCI_BIST are arriving together in one call to xen_pcibk_config_write() with offset == 0xc and size == 4. With the exsisting overlap check the LATENCY_TIMER field (offset == 0xd, length == 1) is fully contained in the write request and hence is excluded from write, which is incorrect. Signed-off-by:
Andrey Grodzovsky <andrey2805@gmail.com> Reviewed-by:
Boris Ostrovsky <boris.ostrovsky@oracle.com> Reviewed-by:
Jan Beulich <JBeulich@suse.com> Cc: <stable@vger.kernel.org> Signed-off-by:
David Vrabel <david.vrabel@citrix.com> Signed-off-by:
-
Alexey Brodkin authored
commit 9bd54517 upstream. If CONFIG_ARC_DW2_UNWIND is disabled every time arc_unwind_core() gets called following message gets printed in debug console: ----------------->8--------------- CONFIG_ARC_DW2_UNWIND needs to be enabled ----------------->8--------------- That message makes sense if user indeed wants to see a backtrace or get nice function call-graphs in perf but what if user disabled unwinder for the purpose? Why pollute his debug console? So instead we'll warn user about possibly missing feature once and let him decide if that was what he or she really wanted. Signed-off-by:
Alexey Brodkin <abrodkin@synopsys.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Torsten Hilbrich authored
commit 63d2f95d upstream. The value `bytes' comes from the filesystem which is about to be mounted. We cannot trust that the value is always in the range we expect it to be. Check its value before using it to calculate the length for the crc32_le call. It value must be larger (or equal) sumoff + 4. This fixes a kernel bug when accidentially mounting an image file which had the nilfs2 magic value 0x3434 at the right offset 0x406 by chance. The bytes 0x01 0x00 were stored at 0x408 and were interpreted as a s_bytes value of 1. This caused an underflow when substracting sumoff + 4 (20) in the call to crc32_le. BUG: unable to handle kernel paging request at ffff88021e600000 IP: crc32_le+0x36/0x100 ... Call Trace: nilfs_valid_sb.part.5+0x52/0x60 [nilfs2] nilfs_load_super_block+0x142/0x300 [nilfs2] init_nilfs+0x60/0x390 [nilfs2] nilfs_mount+0x302/0x520 [nilfs2] mount_fs+0x38/0x160 vfs_kern_mount+0x67/0x110 do_mount+0x269/0xe00 SyS_mount+0x9f/0x100 entry_SYSCALL_64_fastpath+0x16/0x71 Link: http://lkml.kernel.org/r/1466778587-5184-2-git-send-email-konishi.ryusuke@lab.ntt.co.jpSigned-off-by:
Torsten Hilbrich <torsten.hilbrich@secunet.com> Tested-by:
Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Jan Willeke authored
commit dc295880 upstream. The syscall_set_return_value function of s390 negates the error argument before storing the value to the return register gpr2. This is incorrect, the seccomp code already passes the negative error value. Store the unmodified error value to gpr2. Signed-off-by:
Jan Willeke <willeke@de.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Jan Beulich authored
commit 6f2d9d99 upstream. As of Xen 4.7 PV CPUID doesn't expose either of CPUID[1].ECX[7] and CPUID[0x80000007].EDX[7] anymore, causing the driver to fail to load on both Intel and AMD systems. Doing any kind of hardware capability checks in the driver as a prerequisite was wrong anyway: With the hypervisor being in charge, all such checking should be done by it. If ACPI data gets uploaded despite some missing capability, the hypervisor is free to ignore part or all of that data. Ditch the entire check_prereq() function, and do the only valid check (xen_initial_domain()) in the caller in its place. Signed-off-by:
-
Steve French authored
commit 4fcd1813 upstream. Azure server blocks clients that open a socket and don't do anything on it. In our reconnect scenarios, we can reconnect the tcp session and detect the socket is available but we defer the negprot and SMB3 session setup and tree connect reconnection until the next i/o is requested, but this looks suspicous to some servers who expect SMB3 negprog and session setup soon after a socket is created. In the echo thread, reconnect SMB3 sessions and tree connections that are disconnected. A later patch will replay persistent (and resilient) handle opens. Signed-off-by:
Steve French <steve.french@primarydata.com> Acked-by:
Pavel Shilovsky <pshilovsky@samba.org> Signed-off-by:
-
Christoph Hellwig authored
commit bc85dc50 upstream. By folding scsi_end_request into its only caller we can significantly clean up the completion logic. We can use simple goto labels now to only have a single place to finish or requeue command there instead of the previous convoluted logic. Signed-off-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Nicholas Bellinger <nab@linux-iscsi.org> Reviewed-by:
Mike Christie <michaelc@cs.wisc.edu> Reviewed-by:
Hannes Reinecke <hare@suse.de> [jwang: backport to 3.12] Signed-off-by:
-
Wei Fang authored
commit 72d8c36e upstream. sas_ata_strategy_handler() adds the works of the ata error handler to system_unbound_wq. This workqueue asynchronously runs work items, so the ata error handler will be performed concurrently on different CPUs. In this case, ->host_failed will be decreased simultaneously in scsi_eh_finish_cmd() on different CPUs, and become abnormal. It will lead to permanently inequality between ->host_failed and ->host_busy, and scsi error handler thread won't start running. IO errors after that won't be handled. Since all scmds must have been handled in the strategy handler, just remove the decrement in scsi_eh_finish_cmd() and zero ->host_busy after the strategy handler to fix this race. Fixes: 50824d6c ("[SCSI] libsas: async ata-eh") Cc: stable@vger.kernel.org Signed-off-by:
-
Kangjie Lu authored
commit e4ec8cc8 upstream. The stack object âr1â has a total size of 32 bytes. Its field âeventâ and âvalâ both contain 4 bytes padding. These 8 bytes padding bytes are sent to user without being initialized. Signed-off-by:
Kangjie Lu <kjlu@gatech.edu> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Kangjie Lu authored
commit 9a47e9cf upstream. The stack object âr1â has a total size of 32 bytes. Its field âeventâ and âvalâ both contain 4 bytes padding. These 8 bytes padding bytes are sent to user without being initialized. Signed-off-by:
-
