- 29 Aug, 2014 3 commits
-
-
Yegor Yefremov authored
Using $(PWD) breaks builds when make was invoked from outside of the kernel tree. Signed-off-by:
Yegor Yefremov <yegorslists@googlemail.com> Signed-off-by:
Felipe Balbi <balbi@ti.com>
-
Himangi Saraogi authored
This patch introduces the use of the functions usb_endpoint_type and usb_endpoint_num. The Coccinelle semantic patch that makes these changes is as follows: @@ struct usb_endpoint_descriptor *epd; @@ - (epd->bEndpointAddress & \(USB_ENDPOINT_NUMBER_MASK\|0x0f\)) + usb_endpoint_num(epd) @@ struct usb_endpoint_descriptor *epd; @@ - (epd->bmAttributes & \(USB_ENDPOINT_XFERTYPE_MASK\|3\)) + usb_endpoint_type(epd) Signed-off-by:
Himangi Saraogi <himangi774@gmail.com> Acked-by:
Julia Lawall <julia.lawall@lip6.fr> Signed-off-by:
-
Amit Virdi authored
Two simple test cases for interrupt endpoints are added to the usbtest.c file. These are simple non-queued interrupt IN and interrupt OUT transfers. Currently, only gadget zero is capable of executing the interrupt EP test cases. However, extending the same to other gadgets is extremely simple and can be done on-demand. The two new tests added are - Test 25: To verify Interrupt OUT transfer - Test 26: To verify Interrupt IN transfer Since the default value of wMaxPacketSize is set as 1024, so interrupt IN transfers must be specified with the size parameter = multiple of 1024. Otherwise the default value (512) in the usbtest application fails the transfer. See [RUN 4] for sample logs The application logs (usbtest) and corresponding kernel logs are as following: [Run 1] ./testusb -a -c 10 -s 2048 -t 26 -v 511 usbtest 7-1:3.0: TEST 26: read 2048 bytes 10 times [Run 2] ./testusb -a -c 10 -s 1024 -t 25 -v 511 usbtest 7-1:3.0: TEST 25: write 1024 bytes 10 times [Run 3] ./testusb -a -c 10 -s 1098 -t 25 -v 511 usbtest 7-1:3.0: TEST 25: write 1098 bytes 10 times [Run 4 - Failure case scenario] ./testusb -a -t 26 unknown speed /dev/bus/usb/007/004 0 /dev/bus/usb/007/004 test 26 --> 75 (Value too large for defined data type) usbtest 7-1:3.0: TEST 26: read 512 bytes 1000 times usb 7-1: test26 failed, iterations left 999, status -75 (not 0) Signed-off-by:
Amit Virdi <amit.virdi@st.com> Signed-off-by:
-
- 27 Aug, 2014 5 commits
-
-
Amit Virdi authored
Interrupt endpoints behave quite similar to the bulk endpoints with the difference that the endpoints expect data sending/reception request at particular intervals till the whole data has not been transmitted. The interrupt EP support is added to gadget zero. A new alternate setting (=2) has been added. It has 2 interrupt endpoints. The default parameters are set as: bInterval: 1 ms for FS and 8 uFrames (implying 1 ms) for HS/SS wMaxPacketSize: 64 bytes for FS and 1024 bytes for HS/SS However, the same can be overridden through the module parameter interface. The code is tested for HS and SS on a platform having DWC3 controller. Signed-off-by:
-
Richard Leitner authored
Remove the ttyGS PREFIX macro from u_serial.c and replace all occurences with the hardcoded ttyGS string. This macro was mostly used in a few debug/warning messages and a lot of hardcoded ttyGS existed beneath. It may have been used for renaming the tty, but if done so most debug messages would have ignored this. Due to the fact the usage of this PREFIX in all debug calls would have resulted in a hard to read/grep code it is removed completely. Signed-off-by:
Richard Leitner <richard.leitner@skidata.com> Signed-off-by:
-
Richard Leitner authored
Replace the VDBG and DBG macro with the kernels "proper" debug macros (dev_vdbg and dev_dbg) in f_acm.c, f_obex.c & f_serial.c Signed-off-by:
-
Srinivas Kandagatla authored
This patch makes the phy reset clk and reset line optional as this clk is not available on boards like IFC6410 with APQ8064. phy-reset clk is only used as argument to the mach level callbacks, so this patch adds condition before clk_get calls so that the driver wouldn't fail on SOCs which do not have this support. Signed-off-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by:
-
Stefan Agner authored
This adds support for the USB PHY in Vybrid VF610. We assume that the disconnection without VBUS is also needed for Vybrid. Tests showed, without MXS_PHY_NEED_IP_FIX, enumeration of devices behind a USB Hub fails with errors: [ 215.163507] usb usb1-port1: cannot reset (err = -32) [ 215.170498] usb usb1-port1: cannot reset (err = -32) [ 215.185120] usb usb1-port1: cannot reset (err = -32) [ 215.191345] usb usb1-port1: cannot reset (err = -32) [ 215.202487] usb usb1-port1: cannot reset (err = -32) [ 215.207718] usb usb1-port1: Cannot enable. Maybe the USB cable is bad? [ 215.219317] usb usb1-port1: unable to enumerate USB device Hence we also enable the MXS_PHY_NEED_IP_FIX flag. Acked-by:
Peter Chen <peter.chen@freescale.com> Signed-off-by:
Stefan Agner <stefan@agner.ch> Signed-off-by:
-
- 21 Aug, 2014 5 commits
-
-
Paul Zimmerman authored
Document the requirement that the request be dequeued and its completion routine called before usb_ep_dequeue() returns. Also fix some capitalization issues in the existing text. Signed-off-by:
Paul Zimmerman <paulz@synopsys.com> Acked-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
Michael Grzeschik authored
As the driver is in mainline we can remove the version numbers. Signed-off-by:
Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Andrzej Pietrasiewicz authored
If uvc->control_buf is successfuly allocated but uvc->control_req is not, uvc->control_buf is not freed in the error recovery path. With this patch applied uvc->control_buf is freed unconditionally; if it happens to be NULL kfree on it is safe anyway. Signed-off-by:
Andrzej Pietrasiewicz <andrzej.p@samsung.com> Acked-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by:
-
Philipp Zabel authored
Activate the videobuf2 DMABUF support. As vb2-vmalloc supports the importer role only, exporting buffers isn't supported yet. When the exporter role will be implemented in vb2-vmalloc the UVC gadget driver will automatically gain support for it. Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
-
Michael Grzeschik authored
The disconnect of the USB Device is a common pattern for an UVC Camera. In many cases this will give us an meaningless information for all buffers that couldn't be enqueued. That patch changes this to KERN_DEBUG. Signed-off-by:
-
- 20 Aug, 2014 19 commits
-
-
Andrzej Pietrasiewicz authored
Add support for using f_uac1 function as a component of a gadget composed with configfs. Tested-by:
Sebastian Reimers <sebastian.reimers@googlemail.com> Signed-off-by:
-
Andrzej Pietrasiewicz authored
When configfs support is added the values in question will have to be used in two different places. Substitute them with defined constants to avoid duplicating magic numbers. Tested-by:
-
Andrzej Pietrasiewicz authored
Use the new usb_gstring_attach interface. Tested-by:
-
Andrzej Pietrasiewicz authored
There are no users of the old interface left, so it can be removed. Tested-by:
-
Andrzej Pietrasiewicz authored
Use the new interface so that the old one can be removed. Tested-by:
-
Andrzej Pietrasiewicz authored
Converting uac1 to the new function interface requires converting the USB uac1's function code and its users. This patch converts the f_uac1.c to the new function interface. The file is now compiled into a separate usb_f_uac1.ko module. The old function interface is provided by means of a preprocessor conditional directives. After all users are converted, the old interface can be removed. Tested-by:
-
Andrzej Pietrasiewicz authored
Integrating configfs requires converting f_uac1 to new function interface, which in turn requires converting it to the new function interface, which involves separate compilation of f_uac1.c into usb_f_uac1.ko. u_uac1.c contains some module parameters. After this patch is applied they are still a part of the resulting g_audio.ko, but can be guarded with a compatiblity flag which will be removed when no users of the old function interface of f_uac1 are left. Tested-by:
-
Andrzej Pietrasiewicz authored
uac1 function is missing strings. Add them. Tested-by:
-
Andrzej Pietrasiewicz authored
Add support for using f_uac2 function as a component of a gadget composed with configfs. Tested-by:
-
Andrzej Pietrasiewicz authored
When configfs is integrated the same values will have to be used as defaults. Use symbolic names in order not to duplicate magic numbers. Tested-by:
-
Andrzej Pietrasiewicz authored
Use the new usb_gstring_attach interface. Tested-by:
-
Andrzej Pietrasiewicz authored
There are no users of the old interface left, so it can be removed. Tested-by:
-
Andrzej Pietrasiewicz authored
Use the new interface so that the old one can be removed. Tested-by:
-
Andrzej Pietrasiewicz authored
Converting uac2 to the new function interface requires converting the USB uac2's function code and its users. This patch converts the f_uac2.c to the new function interface. The file is now compiled into a separate usb_f_uac2.ko module. The old function interface is provided by means of a preprocessor conditional directives. After all users are converted, the old interface can be removed. Tested-by:
-
Andrzej Pietrasiewicz authored
Eliminate static struct *agdev_g from f_uac2.c. It is used for freeing its memory, but the same address can be found by calling container_of in afunc_unbind(). This implies eliminating uac2_unbind_config(). The audio_config_driver in audio.c does not have its unbind method any more. It has been used only when uac2 is used, so uac2 itself can handle unbinding in afunc_unbind(). Tested-by:
-
Felipe Balbi authored
that declaration is only used inside this driver, marking it static. Signed-off-by: -
Jingoo Han authored
Remove unnecessary lines of register bit definitions in order to enhance the readability. In this case, there are lines per register offset definitions. There is no functional change. Signed-off-by:
Jingoo Han <jg1.han@samsung.com> Signed-off-by:
-
Wei Yongjun authored
There is a error message within devm_ioremap_resource already, so remove the dev_err call to avoid redundant error message. Acked-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by:
Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by:
-
Jingoo Han authored
The site-specific OOM messages are unnecessary, because they duplicate the MM subsystem generic OOM message. Signed-off-by:
-
- 16 Aug, 2014 8 commits
-
-
Linus Torvalds authored
-
git://cavan.codon.org.uk/platform-drivers-x86Linus Torvalds authored
Pull x86 platform driver updates from Matthew Garrett: "A moderate number of changes, but nothing awfully significant. A lot of const cleanups, some reworking and additions to the rfkill quirks in the asus driver, a new driver for generating falling laptop events on Toshibas and some misc fixes. Maybe vendors have stopped inventing things" * 'for_linus' of git://cavan.codon.org.uk/platform-drivers-x86: (41 commits) platform/x86: Enable build support for toshiba_haps Documentation: Add file about toshiba_haps module platform/x86: Toshiba HDD Active Protection Sensor asus-nb-wmi: Add wapf4 quirk for the U32U alienware-wmi: make hdmi_mux enabled on case-by-case basis ideapad-laptop: Constify DMI table and other r/o variables asus-nb-wmi.c: Rename x401u quirk to wapf4 compal-laptop: correct invalid hwmon name toshiba_acpi: Add Qosmio X75-A to the alt keymap dmi list toshiba_acpi: Add extra check to backlight code Fix log message about future removal of interface ideapad-laptop: Disable touchpad interface on Yoga models asus-nb-wmi: Add wapf4 quirk for the X550CC intel_ips: Make ips_mcp_limits variables static thinkpad_acpi: Mark volume_alsa_control_{vol,mute} as __initdata fujitsu-laptop: Mark fujitsu_dmi_table[] DMI table as __initconst hp-wmi: Add missing __init annotations to initialization code hp_accel: Constify ACPI and DMI tables fujitsu-tablet: Mark DMI callbacks as __init code dell-laptop: Mark dell_quirks[] DMI table as __initconst ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linuxLinus Torvalds authored
Pull idle update from Len Brown: "Two Intel-platform-specific updates to intel_idle, and a cosmetic tweak to the turbostat utility" * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: tools/power turbostat: tweak whitespace in output format intel_idle: Broadwell support intel_idle: Disable Baytrail Core and Module C6 auto-demotion
-
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linuxLinus Torvalds authored
Pull module fix from Rusty Russell: "Nasty potential bug if someone uses a known module param with an invalid value (we don't fail unknown module params any more, just warn)" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: module: Clean up ro/nx after early module load failures
-
git://git.kernel.org/pub/scm/linux/kernel/git/amit/virtioLinus Torvalds authored
Pull virtio-rng update from Amit Shah: "Add derating factor for use by hwrng core Sending directly to you with the commit log changes Ted Ts'o pointed out. Not sure if Rusty's back after his travel, but this already has his s-o-b" * 'rng-queue' of git://git.kernel.org/pub/scm/linux/kernel/git/amit/virtio: virtio: rng: add derating factor for use by hwrng core
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfsLinus Torvalds authored
Pull btrfs updates from Chris Mason: "These are all fixes I'd like to get out to a broader audience. The biggest of the bunch is Mark's quota fix, which is also in the SUSE kernel, and makes our subvolume quotas dramatically more accurate. I've been running xfstests with these against your current git overnight, but I'm queueing up longer tests as well" * 'for-linus2' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: btrfs: disable strict file flushes for renames and truncates Btrfs: fix csum tree corruption, duplicate and outdated checksums Btrfs: Fix memory corruption by ulist_add_merge() on 32bit arch Btrfs: fix compressed write corruption on enospc btrfs: correctly handle return from ulist_add btrfs: qgroup: account shared subtrees during snapshot delete Btrfs: read lock extent buffer while walking backrefs Btrfs: __btrfs_mod_ref should always use no_quota btrfs: adjust statfs calculations according to raid profiles
-
git://git.samba.org/jlayton/linuxLinus Torvalds authored
Pull file locking bugfixes from Jeff Layton: "Most of these patches are to fix a long-standing regression that crept in when the BKL was removed from the file-locking code. The code was converted to use a conventional spinlock, but some fl_release_private ops can block and you can end up sleeping inside the lock. There's also a patch to make /proc/locks show delegations as 'DELEG'" * tag 'locks-v3.17-2' of git://git.samba.org/jlayton/linux: locks: update Locking documentation to clarify fl_release_private behavior locks: move locks_free_lock calls in do_fcntl_add_lease outside spinlock locks: defer freeing locks in locks_delete_lock until after i_lock has been dropped locks: don't reuse file_lock in __posix_lock_file locks: don't call locks_release_private from locks_copy_lock locks: show delegations as "DELEG" in /proc/locks
-
git://git.kvack.org/~bcrl/aio-nextLinus Torvalds authored
Pull aio updates from Ben LaHaise. * git://git.kvack.org/~bcrl/aio-next: aio: use iovec array rather than the single one aio: fix some comments aio: use the macro rather than the inline magic number aio: remove the needless registration of ring file's private_data aio: remove no longer needed preempt_disable() aio: kill the misleading rcu read locks in ioctx_add_table() and kill_ioctx() aio: change exit_aio() to load mm->ioctx_table once and avoid rcu_read_lock()
-
