- 01 Dec, 2019 28 commits
-
-
Andreas Gruenbacher authored
[ Upstream commit ec23df2b ] Reservations in gfs can span multiple gfs2_bitmaps (but they won't span multiple resource groups). When removing a reservation, we want to clear the GBF_FULL flags of all involved gfs2_bitmaps, not just that of the first bitmap. Signed-off-by:
Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by:
Bob Peterson <rpeterso@redhat.com> Reviewed-by:
Steven Whitehouse <swhiteho@redhat.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Alan Douglas authored
[ Upstream commit e81e36a9 ] According to the PCIe specification, although the MSI data is only 16bits, the upper 16bits should be written as 0. Use writel instead of writew when writing the MSI data to the host. Fixes: 37dddf14 ("PCI: cadence: Add EndPoint Controller driver for Cadence PCIe controller") Signed-off-by:
Alan Douglas <adouglas@cadence.com> Signed-off-by:
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by:
-
Gustavo A. R. Silva authored
[ Upstream commit 4fe81669 ] There is a potential execution path in which variable *ret* is checked in an IF statement, and then its value is used to report an error at line 659 without being properly initialized previously: 659 if (ret) 660 dev_err(priv->dev, "Failed to write to 0x%x (%d)\n", reg, ret); Fix this by initializing variable *ret* to 0 in order to avoid unpredictable or unintended results. Addresses-Coverity-ID: 1471969 ("Uninitialized scalar variable") Fixes: 218d72a7 ("pinctrl: madera: Add driver for Cirrus Logic Madera codecs") Signed-off-by:
Gustavo A. R. Silva <gustavo@embeddedor.com> Acked-by:
Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Sergey Senozhatsky authored
[ Upstream commit d2130e82 ] The way we calculate logbuf free space percentage overflows signed integer: int free; free = __LOG_BUF_LEN - log_next_idx; pr_info("early log buf free: %u(%u%%)\n", free, (free * 100) / __LOG_BUF_LEN); We support LOG_BUF_LEN of up to 1<<25 bytes. Since setup_log_buf() is called during early init, logbuf is mostly empty, so __LOG_BUF_LEN - log_next_idx is close to 1<<25. Thus when we multiply it by 100, we overflow signed integer value range: 100 is 2^6 + 2^5 + 2^2. Example, booting with LOG_BUF_LEN 1<<25 and log_buf_len=2G boot param: [ 0.075317] log_buf_len: -2147483648 bytes [ 0.075319] early log buf free: 33549896(-28%) Make "free" unsigned integer and use appropriate printk() specifier. Link: http://lkml.kernel.org/r/20181010113308.9337-1-sergey.senozhatsky@gmail.com To: Steven Rostedt <rostedt@goodmis.org> Cc: linux-kernel@vger.kernel.org Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Signed-off-by:
Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by:
Petr Mladek <pmladek@suse.com> Signed-off-by:
-
Sergey Senozhatsky authored
[ Upstream commit 3ac37a93 ] Prior to commit 5c2992ee ("printk: remove console flushing special cases for partial buffered lines") we would do console_cont_flush() for each pr_cont() to print cont fragments, so console_unlock() would actually print data: pr_cont(); console_lock(); console_unlock() console_cont_flush(); // print cont fragment ... pr_cont(); console_lock(); console_unlock() console_cont_flush(); // print cont fragment We don't do console_cont_flush() anymore, so when we do pr_cont() console_unlock() does nothing (unless we flushed the cont buffer): pr_cont(); console_lock(); console_unlock(); // noop ... pr_cont(); console_lock(); console_unlock(); // noop ... pr_cont(); cont_flush(); console_lock(); console_unlock(); // print data We also wakeup klogd purposelessly for pr_cont() output - un-flushed cont buffer is not stored in log_buf; there is nothing to pull. Thus we can console_lock()/console_unlock()/wake_up_klogd() only when we know that we log_store()-ed a message and there is something to print to the consoles/syslog. Link: http://lkml.kernel.org/r/20181002023836.4487-3-sergey.senozhatsky@gmail.com To: Steven Rostedt <rostedt@goodmis.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Dmitriy Vyukov <dvyukov@google.com> Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Cc: Tejun Heo <tj@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: LKML <linux-kernel@vger.kernel.org> Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Signed-off-by:
-
Michael Schupikov authored
[ Upstream commit 22a8118d ] After allocation, output and decomp_output both point to memory chunks of size COMP_BUF_SIZE. Then, only the first bytes are zeroed out using sizeof(COMP_BUF_SIZE) as parameter to memset(), because sizeof(COMP_BUF_SIZE) provides the size of the constant and not the size of allocated memory. Instead, the whole allocated memory is meant to be zeroed out. Use COMP_BUF_SIZE as parameter to memset() directly in order to accomplish this. Fixes: 33607384 ("crypto: testmgr - Allow different compression results") Signed-off-by:
Michael Schupikov <michael@schupikov.de> Reviewed-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Takashi Sakamoto authored
[ Upstream commit 51e68fb0 ] In some error paths, reference count of firewire unit is not decreased. This commit fixes the bug. Fixes: 5b14ec25('ALSA: firewire: release reference count of firewire unit in .remove callback of bus driver') Signed-off-by:
Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Adrian Bunk authored
[ Upstream commit 65a576e2 ] NL80211_TX_POWER_LIMITED was treated as NL80211_TX_POWER_AUTOMATIC, which is the opposite of what should happen and can cause nasty regulatory problems. if/else converted to a switch without default to make gcc warn on unhandled enum values. Signed-off-by:
Adrian Bunk <bunk@kernel.org> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Chris Wilson authored
commit 2d691aec upstream. set_page_dirty says: For pages with a mapping this should be done under the page lock for the benefit of asynchronous memory errors who prefer a consistent dirty state. This rule can be broken in some special cases, but should be better not to. Under those rules, it is only safe for us to use the plain set_page_dirty calls for shmemfs/anonymous memory. Userptr may be used with real mappings and so needs to use the locked version (set_page_dirty_lock). However, following a try_to_unmap() we may want to remove the userptr and so call put_pages(). However, try_to_unmap() acquires the page lock and so we must avoid recursively locking the pages ourselves -- which means that we cannot safely acquire the lock around set_page_dirty(). Since we can't be sure of the lock, we have to risk skip dirtying the page, or else risk calling set_page_dirty() without a lock and so risk fs corruption. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=203317 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=112012 Fixes: 5cc9ed4b ("drm/i915: Introduce mapping of user pages into video memory (userptr) ioctl") References: cb6d7c7d ("drm/i915/userptr: Acquire the page lock around set_page_dirty()") References: 505a8ec7 ("Revert "drm/i915/userptr: Acquire the page lock around set_page_dirty()"") References: 6dcc693b ("ext4: warn when page is dirtied without buffers") Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: stable@vger.kernel.org Reviewed-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191111133205.11590-1-chris@chris-wilson.co.uk (cherry picked from commit 0d4bbe3d) Signed-off-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> (cherry picked from commit cee7fb43) Signed-off-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Chris Wilson authored
commit add3eeed upstream. We report "frequencies" (actual-frequency, requested-frequency) as the number of accumulated cycles so that the average frequency over that period may be determined by the user. This means the units we report to the user are Mcycles (or just M), not MHz. Signed-off-by:
-
Evan Quan authored
commit 355d991c upstream. Otherwise, the error message prompted will confuse user. Signed-off-by:
Evan Quan <evan.quan@amd.com> Acked-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Andrey Ryabinin authored
commit 9a63236f upstream. It's possible to hit the WARN_ON_ONCE(page_mapped(page)) in remove_stable_node() when it races with __mmput() and squeezes in between ksm_exit() and exit_mmap(). WARNING: CPU: 0 PID: 3295 at mm/ksm.c:888 remove_stable_node+0x10c/0x150 Call Trace: remove_all_stable_nodes+0x12b/0x330 run_store+0x4ef/0x7b0 kernfs_fop_write+0x200/0x420 vfs_write+0x154/0x450 ksys_write+0xf9/0x1d0 do_syscall_64+0x99/0x510 entry_SYSCALL_64_after_hwframe+0x49/0xbe Remove the warning as there is nothing scary going on. Link: http://lkml.kernel.org/r/20191119131850.5675-1-aryabinin@virtuozzo.com Fixes: cbf86cfe ("ksm: remove old stable nodes more thoroughly") Signed-off-by:
Andrey Ryabinin <aryabinin@virtuozzo.com> Acked-by:
Hugh Dickins <hughd@google.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Joseph Qi authored
commit 94b07b6f upstream. This reverts commit 56e94ea1. Commit 56e94ea1 ("fs: ocfs2: fix possible null-pointer dereferences in ocfs2_xa_prepare_entry()") introduces a regression that fail to create directory with mount option user_xattr and acl. Actually the reported NULL pointer dereference case can be correctly handled by loc->xl_ops->xlo_add_entry(), so revert it. Link: http://lkml.kernel.org/r/1573624916-83825-1-git-send-email-joseph.qi@linux.alibaba.com Fixes: 56e94ea1 ("fs: ocfs2: fix possible null-pointer dereferences in ocfs2_xa_prepare_entry()") Signed-off-by:
Joseph Qi <joseph.qi@linux.alibaba.com> Reported-by:
Thomas Voegtle <tv@lio96.de> Acked-by:
Changwei Ge <gechangwei@live.cn> Cc: Jia-Ju Bai <baijiaju1990@gmail.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Laurent Vivier authored
commit d791cfcb upstream. When we hot unplug a virtserialport and then try to hot plug again, it fails: (qemu) chardev-add socket,id=serial0,path=/tmp/serial0,server,nowait (qemu) device_add virtserialport,bus=virtio-serial0.0,nr=2,\ chardev=serial0,id=serial0,name=serial0 (qemu) device_del serial0 (qemu) device_add virtserialport,bus=virtio-serial0.0,nr=2,\ chardev=serial0,id=serial0,name=serial0 kernel error: virtio-ports vport2p2: Error allocating inbufs qemu error: virtio-serial-bus: Guest failure in adding port 2 for device \ virtio-serial0.0 This happens because buffers for the in_vq are allocated when the port is added but are not released when the port is unplugged. They are only released when virtconsole is removed (see a7a69ec0) To avoid the problem and to be symmetric, we could allocate all the buffers in init_vqs() as they are released in remove_vqs(), but it sounds like a waste of memory. Rather than that, this patch changes add_port() logic to ignore ENOSPC error in fill_queue(), which means queue has already been filled. Fixes: a7a69ec0 ("virtio_console: free buffers after reset") Cc: mst@redhat.com Cc: stable@vger.kernel.org Signed-off-by:
Laurent Vivier <lvivier@redhat.com> Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
-
Sun Ke authored
commit dff10bbe upstream. Before returning NULL, put the sock first. Cc: stable@vger.kernel.org Fixes: cf1b2326 ("nbd: verify socket is supported during setup") Reviewed-by:
Josef Bacik <josef@toxicpanda.com> Reviewed-by:
Mike Christie <mchristi@redhat.com> Signed-off-by:
Sun Ke <sunke32@huawei.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Laura Abbott authored
commit 0161a94e upstream. gpio tools fail to build correctly with make parallelization: $ make -s -j24 ld: gpio-utils.o: file not recognized: file truncated make[1]: *** [/home/labbott/linux_upstream/tools/build/Makefile.build:145: lsgpio-in.o] Error 1 make: *** [Makefile:43: lsgpio-in.o] Error 2 make: *** Waiting for unfinished jobs.... This is because gpio-utils.o is used across multiple targets. Fix this by making gpio-utios.o a proper dependency. Cc: <stable@vger.kernel.org> Signed-off-by:
Laura Abbott <labbott@redhat.com> Signed-off-by:
Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by:
-
Thierry Reding authored
commit b0391479 upstream. When converting milliseconds to microseconds in commit fffa6af9 ("gpio: max77620: Use correct unit for debounce times") some ~1 ms gaps were introduced between the various ranges supported by the controller. Fix this by changing the start of each range to the value immediately following the end of the previous range. This way a debounce time of, say 8250 us will translate into 16 ms instead of returning an -EINVAL error. Typically the debounce delay is only ever set through device tree and specified in milliseconds, so we can never really hit this issue because debounce times are always a multiple of 1000 us. The only notable exception for this is drivers/mmc/host/mmc-spi.c where the CD GPIO is requested, which passes a 1 us debounce time. According to a comment preceeding that code this should actually be 1 ms (i.e. 1000 us). Reported-by:
Pavel Machek <pavel@denx.de> Signed-off-by:
Thierry Reding <treding@nvidia.com> Acked-by:
-
Stefano Garzarella authored
commit 6dbd3e66 upstream. If the packets to sent to the guest are bigger than the buffer available, we can split them, using multiple buffers and fixing the length in the packet header. This is safe since virtio-vsock supports only stream sockets. Signed-off-by:
Stefano Garzarella <sgarzare@redhat.com> Reviewed-by:
Stefan Hajnoczi <stefanha@redhat.com> Acked-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Maor Gottlieb authored
[ Upstream commit 97fd8da2 ] Once all the large flow groups (defined by the user when the flow table is created - max_num_groups) were created, then all the following new flow groups will have only one flow table entry, even though the flow table has place to larger groups. Fix the condition to prefer large flow group. Fixes: f0d22d18 ("net/mlx5_core: Introduce flow steering autogrouped flow table") Signed-off-by:
Maor Gottlieb <maorg@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
-
Eran Ben Elisha authored
[ Upstream commit 30e9e055 ] Array mlxfw_fsm_state_err_str contains value to string translation, when values are provided by mlxfw_dev. If value is larger than MLXFW_FSM_STATE_ERR_MAX, return "unknown error" as expected instead of reading an address than exceed array size. Fixes: 410ed13c ("Add the mlxfw module for Mellanox firmware flash process") Signed-off-by:
Eran Ben Elisha <eranbe@mellanox.com> Acked-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Roi Dayan authored
[ Upstream commit 75102121 ] Before this commit the ndo always returned success. Fix that. Fixes: 1ab2068a ("net/mlx5: Implement vports admin state backup/restore") Signed-off-by:
Roi Dayan <roid@mellanox.com> Reviewed-by:
Vlad Buslov <vladbu@mellanox.com> Signed-off-by:
-
Martin Habets authored
[ Upstream commit 723eb536 ] The workqueue only exists for the primary PF. For other functions we hit a WARN_ON in kernel/workqueue.c. Fixes: 7c236c43 ("sfc: Add support for IEEE-1588 PTP") Signed-off-by:
Martin Habets <mhabets@solarflare.com> Signed-off-by:
-
Xin Long authored
[ Upstream commit 4f0e97d0 ] info->options_len is 'u8' type, and when opts_len with a value > IP_TUNNEL_OPTS_MAX, 'info->options_len = opts_len' will cast int to u8 and set a wrong value to info->options_len. Kernel crashed in my test when doing: # opts="0102:80:00800022" # for i in {1..99}; do opts="$opts,0102:80:00800022"; done # ip link add name geneve0 type geneve dstport 0 external # tc qdisc add dev eth0 ingress # tc filter add dev eth0 protocol ip parent ffff: \ flower indev eth0 ip_proto udp action tunnel_key \ set src_ip 10.0.99.192 dst_ip 10.0.99.193 \ dst_port 6081 id 11 geneve_opts $opts \ action mirred egress redirect dev geneve0 So we should do the similar check as cls_flower does, return error when opts_len > IP_TUNNEL_OPTS_MAX in tunnel_key_copy_opts(). Fixes: 0ed5269f ("net/sched: add tunnel option support to act_tunnel_key") Signed-off-by:
Xin Long <lucien.xin@gmail.com> Reviewed-by:
Simon Horman <simon.horman@netronome.com> Signed-off-by:
-
Davide Caratti authored
[ Upstream commit f67169fe ] when configuring act_pedit rules, the number of keys is validated only on addition of a new entry. This is not sufficient to avoid hitting a WARN() in the traffic path: for example, it is possible to replace a valid entry with a new one having 0 extended keys, thus causing splats in dmesg like: pedit BUG: index 42 WARNING: CPU: 2 PID: 4054 at net/sched/act_pedit.c:410 tcf_pedit_act+0xc84/0x1200 [act_pedit] [...] RIP: 0010:tcf_pedit_act+0xc84/0x1200 [act_pedit] Code: 89 fa 48 c1 ea 03 0f b6 04 02 84 c0 74 08 3c 03 0f 8e ac 00 00 00 48 8b 44 24 10 48 c7 c7 a0 c4 e4 c0 8b 70 18 e8 1c 30 95 ea <0f> 0b e9 a0 fa ff ff e8 00 03 f5 ea e9 14 f4 ff ff 48 89 58 40 e9 RSP: 0018:ffff888077c9f320 EFLAGS: 00010286 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffffac2983a2 RDX: 0000000000000001 RSI: 0000000000000008 RDI: ffff888053927bec RBP: dffffc0000000000 R08: ffffed100a726209 R09: ffffed100a726209 R10: 0000000000000001 R11: ffffed100a726208 R12: ffff88804beea780 R13: ffff888079a77400 R14: ffff88804beea780 R15: ffff888027ab2000 FS: 00007fdeec9bd740(0000) GS:ffff888053900000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ffdb3dfd000 CR3: 000000004adb4006 CR4: 00000000001606e0 Call Trace: tcf_action_exec+0x105/0x3f0 tcf_classify+0xf2/0x410 __dev_queue_xmit+0xcbf/0x2ae0 ip_finish_output2+0x711/0x1fb0 ip_output+0x1bf/0x4b0 ip_send_skb+0x37/0xa0 raw_sendmsg+0x180c/0x2430 sock_sendmsg+0xdb/0x110 __sys_sendto+0x257/0x2b0 __x64_sys_sendto+0xdd/0x1b0 do_syscall_64+0xa5/0x4e0 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x7fdeeb72e993 Code: 48 8b 0d e0 74 2c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 83 3d 0d d6 2c 00 00 75 13 49 89 ca b8 2c 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 34 c3 48 83 ec 08 e8 4b cc 00 00 48 89 04 24 RSP: 002b:00007ffdb3de8a18 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 000055c81972b700 RCX: 00007fdeeb72e993 RDX: 0000000000000040 RSI: 000055c81972b700 RDI: 0000000000000003 RBP: 00007ffdb3dea130 R08: 000055c819728510 R09: 0000000000000010 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000040 R13: 000055c81972b6c0 R14: 000055c81972969c R15: 0000000000000080 Fix this moving the check on 'nkeys' earlier in tcf_pedit_init(), so that attempts to install rules having 0 keys are always rejected with -EINVAL. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
Davide Caratti <dcaratti@redhat.com> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit d658c8f56ec7b3de8051a24afb25da9ba3c388c5 ] The "ivm->vf" variable is a u32, but the problem is that a number of drivers cast it to an int and then forget to check for negatives. An example of this is in the cxgb4 driver. drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c 2890 static int cxgb4_mgmt_get_vf_config(struct net_device *dev, 2891 int vf, struct ifla_vf_info *ivi) ^^^^^^ 2892 { 2893 struct port_info *pi = netdev_priv(dev); 2894 struct adapter *adap = pi->adapter; 2895 struct vf_info *vfinfo; 2896 2897 if (vf >= adap->num_vfs) ^^^^^^^^^^^^^^^^^^^ 2898 return -EINVAL; 2899 vfinfo = &adap->vfinfo[vf]; ^^^^^^^^^^^^^^^^^^^^^^^^^^ There are 48 functions affected. drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c:8435 hclge_set_vf_vlan_filter() warn: can 'vfid' underflow 's32min-2147483646' drivers/net/ethernet/freescale/enetc/enetc_pf.c:377 enetc_pf_set_vf_mac() warn: can 'vf' underflow 's32min-2147483646' drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c:2899 cxgb4_mgmt_get_vf_config() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c:2960 cxgb4_mgmt_set_vf_rate() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c:3019 cxgb4_mgmt_set_vf_rate() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c:3038 cxgb4_mgmt_set_vf_vlan() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c:3086 cxgb4_mgmt_set_vf_link_state() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/chelsio/cxgb/cxgb2.c:791 get_eeprom() warn: can 'i' underflow 's32min-(-4),0,4-s32max' drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:82 bnxt_set_vf_spoofchk() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:164 bnxt_set_vf_trust() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:186 bnxt_get_vf_config() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:228 bnxt_set_vf_mac() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:264 bnxt_set_vf_vlan() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:293 bnxt_set_vf_bw() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:333 bnxt_set_vf_link_state() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c:2595 bnx2x_vf_op_prep() warn: can 'vfidx' underflow 's32min-63' drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c:2595 bnx2x_vf_op_prep() warn: can 'vfidx' underflow 's32min-63' drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c:2281 bnx2x_post_vf_bulletin() warn: can 'vf' underflow 's32min-63' drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c:2285 bnx2x_post_vf_bulletin() warn: can 'vf' underflow 's32min-63' drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c:2286 bnx2x_post_vf_bulletin() warn: can 'vf' underflow 's32min-63' drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c:2292 bnx2x_post_vf_bulletin() warn: can 'vf' underflow 's32min-63' drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c:2297 bnx2x_post_vf_bulletin() warn: can 'vf' underflow 's32min-63' drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c:1832 qlcnic_sriov_set_vf_mac() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c:1864 qlcnic_sriov_set_vf_tx_rate() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c:1937 qlcnic_sriov_set_vf_vlan() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c:2005 qlcnic_sriov_get_vf_config() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c:2036 qlcnic_sriov_set_vf_spoofchk() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/emulex/benet/be_main.c:1914 be_get_vf_config() warn: can 'vf' underflow 's32min-65534' drivers/net/ethernet/emulex/benet/be_main.c:1915 be_get_vf_config() warn: can 'vf' underflow 's32min-65534' drivers/net/ethernet/emulex/benet/be_main.c:1922 be_set_vf_tvt() warn: can 'vf' underflow 's32min-65534' drivers/net/ethernet/emulex/benet/be_main.c:1951 be_clear_vf_tvt() warn: can 'vf' underflow 's32min-65534' drivers/net/ethernet/emulex/benet/be_main.c:2063 be_set_vf_tx_rate() warn: can 'vf' underflow 's32min-65534' drivers/net/ethernet/emulex/benet/be_main.c:2091 be_set_vf_link_state() warn: can 'vf' underflow 's32min-65534' drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c:2609 ice_set_vf_port_vlan() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c:3050 ice_get_vf_cfg() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c:3103 ice_set_vf_spoofchk() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c:3181 ice_set_vf_mac() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c:3237 ice_set_vf_trust() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c:3286 ice_set_vf_link_state() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:3919 i40e_validate_vf() warn: can 'vf_id' underflow 's32min-2147483646' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:3957 i40e_ndo_set_vf_mac() warn: can 'vf_id' underflow 's32min-2147483646' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4104 i40e_ndo_set_vf_port_vlan() warn: can 'vf_id' underflow 's32min-2147483646' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4263 i40e_ndo_set_vf_bw() warn: can 'vf_id' underflow 's32min-2147483646' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4309 i40e_ndo_get_vf_config() warn: can 'vf_id' underflow 's32min-2147483646' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4371 i40e_ndo_set_vf_link_state() warn: can 'vf_id' underflow 's32min-2147483646' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4441 i40e_ndo_set_vf_spoofchk() warn: can 'vf_id' underflow 's32min-2147483646' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4441 i40e_ndo_set_vf_spoofchk() warn: can 'vf_id' underflow 's32min-2147483646' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4504 i40e_ndo_set_vf_trust() warn: can 'vf_id' underflow 's32min-2147483646' Signed-off-by:Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Tariq Toukan authored
[ Upstream commit 2744bf42 ] XDP_TX rings should not be limited by max_num_tx_rings_p_up. To make sure total number of TX rings never exceed MAX_TX_RINGS, add similar check in mlx4_en_alloc_tx_queue_per_tc(), where a new value is assigned for num_up. Fixes: 7e1dc5e9 ("net/mlx4_en: Limit the number of TX rings") Signed-off-by:
Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
-
Luigi Rizzo authored
[ Upstream commit 34e59836 ] ethtool expects ETHTOOL_GRXCLSRLALL to set ethtool_rxnfc->data with the total number of entries in the rx classifier table. Surprisingly, mlx4 is missing this part (in principle ethtool could still move forward and try the insert). Tested: compiled and run command: phh13:~# ethtool -N eth1 flow-type udp4 queue 4 Added rule with ID 255 Signed-off-by:
Luigi Rizzo <lrizzo@google.com> Reviewed-by:
-
Petr Machata authored
[ Upstream commit 1fc16577 ] The helper mlxsw_sp_ipip_dev_ul_tb_id() determines the underlay VRF of a GRE tunnel. For a tunnel without a bound device, it uses the same VRF that the tunnel is in. However in Linux, a GRE tunnel without a bound device uses the main VRF as the underlay. Fix the function accordingly. mlxsw further assumed that moving a tunnel to a different VRF could cause conflict in local tunnel endpoint address, which cannot be offloaded. However, the only way that an underlay could be changed by moving the tunnel device itself is if the tunnel device does not have a bound device. But in that case the underlay is always the main VRF, so there is no opportunity to introduce a conflict by moving such device. Thus this check constitutes a dead code, and can be removed, which do. Fixes: 6ddb7426 ("mlxsw: spectrum_router: Introduce loopback RIFs") Signed-off-by:
Petr Machata <petrm@mellanox.com> Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
-
- 24 Nov, 2019 12 commits
-
-
Greg Kroah-Hartman authored
-
Reinette Chatre authored
[ Upstream commit 52eb7433 ] rdt_find_domain() returns an ERR_PTR() that is generated from a provided domain id when the value is negative. Care needs to be taken when creating an ERR_PTR() from this value because a subsequent check using IS_ERR() expects the error to be within the MAX_ERRNO range. Using an invalid domain id as an ERR_PTR() does work at this time since this is currently always -1. Using this undocumented assumption is fragile since future users of rdt_find_domain() may not be aware of thus assumption. Two related issues are addressed: - Ensure that rdt_find_domain() always returns a valid error value by forcing the error to be -ENODEV when a negative domain id is provided. - In a few instances the return value of rdt_find_domain() is just checked for NULL - fix these to include a check of ERR_PTR. Fixes: d89b7379 ("x86/intel_rdt/cqm: Add mon_data") Fixes: 521348b0 ("x86/intel_rdt: Introduce utility to obtain CDP peer") Signed-off-by:
Reinette Chatre <reinette.chatre@intel.com> Signed-off-by:
Borislav Petkov <bp@suse.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: fenghua.yu@intel.com Cc: gavin.hindman@intel.com Cc: jithu.joseph@intel.com Cc: x86-ml <x86@kernel.org> Link: https://lkml.kernel.org/r/b88cd4ff6a75995bf8db9b0ea546908fe50f69f3.1544479852.git.reinette.chatre@intel.comSigned-off-by:
-
Takeshi Saito authored
[ Upstream commit 51b72656 ] If an SCC error occurs during a read/write command execution, a false positive CRC error message is output. mmcblk0: response CRC error sending r/w cmd command, card status 0x900 check_scc_error() checks SCC_RVSREQ.RVSERR bit. RVSERR detects a correction error in the next (up or down) delay tap position. However, since the command is successful, only retuning needs to be executed. This has been confirmed by HW engineers. Thus, on SCC error, set retuning flag instead of setting an error code. Fixes: b85fb0a1 ("mmc: tmio: Fix SCC error detection") Signed-off-by:
Takeshi Saito <takeshi.saito.xv@renesas.com> [wsa: updated comment and commit message, removed some braces] Signed-off-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by:
Simon Horman <horms+renesas@verge.net.au> Reviewed-by:
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Cc: stable@vger.kernel.org Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Michael Ellerman authored
[ Upstream commit b4d16ab5 ] In the recent commit 8b78fdb0 ("powerpc/time: Use clockevents_register_device(), fixing an issue with large decrementer") we changed the way we initialise the decrementer clockevent(s). We no longer initialise the mult & shift values of decrementer_clockevent itself. This has the effect of breaking PR KVM, because it uses those values in kvmppc_emulate_dec(). The symptom is guest kernels spin forever mid-way through boot. For now fix it by assigning back to decrementer_clockevent the mult and shift values. Fixes: 8b78fdb0 ("powerpc/time: Use clockevents_register_device(), fixing an issue with large decrementer") Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Alan Mikhak authored
[ Upstream commit 8a5e0af2 ] pcitest is currently broken due to the following compiler error and related warning. Fix by changing the run_test() function signature to return an integer result. pcitest.c: In function run_test: pcitest.c:143:9: warning: return with a value, in function returning void return (ret < 0) ? ret : 1 - ret; /* return 0 if test succeeded */ pcitest.c: In function main: pcitest.c:232:9: error: void value not ignored as it ought to be return run_test(test); Fixes: fef31eca ("tools: PCI: Fix compilation warnings") Signed-off-by:
Alan Mikhak <alan.mikhak@sifive.com> Signed-off-by:
Paul Walmsley <paul.walmsley@sifive.com> Signed-off-by:
-
Enric Balletbo i Serra authored
[ Upstream commit b53b0128 ] The patch 23c7b54c: "PM / devfreq: Fix devfreq_add_device() when drivers are built as modules." leads to the following static checker warning: drivers/devfreq/devfreq.c:1043 governor_store() warn: 'governor' can also be NULL The reason is that the try_then_request_governor() function returns both error pointers and NULL. It should just return error pointers, so fix this by returning a ERR_PTR to the error intead of returning NULL. Fixes: 23c7b54c ("PM / devfreq: Fix devfreq_add_device() when drivers are built as modules.") Reported-by:
Enric Balletbo i Serra <enric.balletbo@collabora.com> Reviewed-by:
Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by:
MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by:
-
Hans de Goede authored
[ Upstream commit c8afd034 ] Commit 48402cee ("ACPI / LPSS: Resume BYT/CHT I2C controllers from resume_noirq") makes acpi_lpss_{suspend_late,resume_early}() bail early on BYT/CHT as resume_from_noirq is set. This means that on resume from hibernate dw_i2c_plat_resume() doesn't get called by the restore_early callback, acpi_lpss_resume_early(). Instead it should be called by the restore_noirq callback matching how things are done when resume_from_noirq is set and we are doing a regular resume. Change the restore_noirq callback to acpi_lpss_resume_noirq so that dw_i2c_plat_resume() gets properly called when resume_from_noirq is set and we are resuming from hibernate. Likewise also change the poweroff_noirq callback so that dw_i2c_plat_suspend gets called properly. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=202139 Fixes: 48402cee ("ACPI / LPSS: Resume BYT/CHT I2C controllers from resume_noirq") Reported-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Cc: 4.20+ <stable@vger.kernel.org> # 4.20+ Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Yuchung Cheng authored
[ Upstream commit 041a14d2 ] Previously receiver buffer auto-tuning starts after receiving one advertised window amount of data. After the initial receiver buffer was raised by patch a337531b ("tcp: up initial rmem to 128KB and SYN rwin to around 64KB"), the reciver buffer may take too long to start raising. To address this issue, this patch lowers the initial bytes expected to receive roughly the expected sender's initial window. Fixes: a337531b ("tcp: up initial rmem to 128KB and SYN rwin to around 64KB") Signed-off-by:
Yuchung Cheng <ycheng@google.com> Signed-off-by:
Wei Wang <weiwan@google.com> Signed-off-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Reviewed-by:
Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by:
-
Roger Quadros authored
[ Upstream commit a763ecc1 ] OMAP5's Super-Speed USB port has a software mailbox register that needs to be fed with VBUS and ID events from an external VBUS/ID comparator. Without this, Host role will not work correctly. Fixes: 656c1a65 ("ARM: dts: omap5: enable OTG role for DWC3 controller") Reported-by:
H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by:
Roger Quadros <rogerq@ti.com> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Ido Schimmel authored
[ Upstream commit 5050f6ae ] VxLAN FDB updates are sent with the VxLAN device which is not our upper and will therefore be ignored by current code. Solve this by checking whether the upper device (bridge) is our upper. Signed-off-by:
-
Huibin Hong authored
[ Upstream commit dd8fd2cb ] The rxconf and txconf structs are allocated on the stack, so make sure we zero them before filling out the relevant fields. Signed-off-by:
Huibin Hong <huibin.hong@rock-chips.com> Signed-off-by:
Emil Renner Berthing <kernel@esmil.dk> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Felix Fietkau authored
[ Upstream commit 972b66b8 ] Long/short preamble selection cannot be sampled separately, since it depends on the BSS state. Because of that, sampling attempts to currently not used preamble modes are not counted in the statistics, which leads to CCK rates being sampled too often. Fix statistics accounting for long/short preamble by increasing the index where necessary. Fix excessive CCK rate sampling by dropping unsupported sample attempts. This improves throughput on 2.4 GHz channels Signed-off-by:
Felix Fietkau <nbd@nbd.name> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
