- 07 Jul, 2011 1 commit
-
-
Shan Wei authored
net-next-2.6/drivers/net/bnx2x/bnx2x_sp.c: 19 linux/version.h not needed. net-next-2.6/drivers/net/caif/caif_hsi.c: 9 linux/version.h not needed. Signed-off-by:
Shan Wei <shanwei@cn.fujitsu.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 06 Jul, 2011 19 commits
-
-
David S. Miller authored
When we clone the SKB, we forget about the original one. Avoid this problem by using skb_share_check(). Reported-by:
Penttilä Mika <mika.penttila@ixonos.com> Signed-off-by:
-
Eric Dumazet authored
Signed-off-by:
Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
-
David S. Miller authored
Unfortunately we have to use a real modulus here as the multiply trick won't work as effectively with cpu numbers as it does with rxhash values. Signed-off-by: -
Eric Dumazet authored
Followup to commit f82528bc (Exclude duplicated checking for iface-up) : We no longer need percpu tx_dropped field. Signed-off-by:
-
David S. Miller authored
Signed-off-by: -
Shmulik Ravid authored
This patch add an unsolicited notification of the DCBX negotiated parameters for the CEE flavor of the DCBX protocol. The notification message is identical to the aggregated CEE get operation and holds all the pertinent local and peer information. The notification routine is exported so it can be invoked by drivers supporting an embedded DCBX stack. Signed-off-by:
Shmulik Ravid <shmulikr@broadcom.com> Signed-off-by:
-
Shmulik Ravid authored
The following couple of patches add dcbnl an unsolicited notification of the the DCB configuration for the CEE flavor of the DCBX protocol. This is useful when the user-mode DCB client is not responsible for conducting and resolving the DCBX negotiation (either because the DCBX stack is embedded in the HW or the negotiation is handled by another agent in the host), but still needs to get the negotiated parameters. This functionality already exists for the IEEE flavor of the DCBX protocol and these patches add it to the older CEE flavor. The first patch extends the CEE attribute GET operation to include not only the peer information, but also all the pertinent local configuration (negotiated parameters). The second patch adds and export a CEE specific notification routine. Signed-off-by:
-
David S. Miller authored
-
Joe Perches authored
Convert a printk with a static to pr_<level>_once Add and use DRV_DESCRIPTION to reduce string duplication. Remove now unused version. Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
Shan Wei authored
Just add GSO to vlan_features initialization, and update comments. When we set offload features, vlan_dev_fix_features() will do more check. In vlan_dev_fix_features(), final features is decided by features of real device and vlan_features of real device. Signed-off-by:
-
David S. Miller authored
The skb->rxhash cannot be properly computed if the packet is a fragment. To alleviate this, allow the AF_PACKET client to ask for defragmentation to be done at demux time. Signed-off-by: -
David S. Miller authored
Elide the ICMP on frag queue timeouts unconditionally for this user. Signed-off-by: -
David S. Miller authored
Fanouts allow packet capturing to be demuxed to a set of AF_PACKET sockets. Two fanout policies are implemented: 1) Hashing based upon skb->rxhash 2) Pure round-robin An AF_PACKET socket must be fully bound before it tries to add itself to a fanout. All AF_PACKET sockets trying to join the same fanout must all have the same bind settings. Fanouts are identified (within a network namespace) by a 16-bit ID. The first socket to try to add itself to a fanout with a particular ID, creates that fanout. When the last socket leaves the fanout (which happens only when the socket is closed), that fanout is destroyed. Signed-off-by: -
David S. Miller authored
Signed-off-by: -
Shan Wei authored
If gso/gro feature of underlying device is turned off， then new created vlan device never can turn gso/gro on. Although underlying device don't support TSO, we still should use software segments for vlan device. Signed-off-by:
-
-
Shreyas Bhatewara authored
If the rx ring is completely empty, then the device may never fire an rx interrupt. Unfortunately, the rx interrupt is what triggers populating the rx ring with fresh buffers, so this will cause networking to lock up. This patch replenishes the skb in recv descriptor as soon as it is peeled off while processing rx completions. If the skb/buffer allocation fails, existing one is recycled and the packet in hand is dropped. This way none of the RX desc is ever left empty, thus avoiding starvation Signed-off-by:
Scott J. Goldman <scottjg@vmware.com> Signed-off-by:
Shreyas N Bhatewara <sbhatewara@vmware.com> Signed-off-by:
-
Herbert Xu authored
As is_multicast_ether_addr returns true on broadcast packets as well, we need to explicitly exclude broadcast packets so that they're always flooded. This wasn't an issue before as broadcast packets were considered to be an unregistered multicast group, which were always flooded. However, as we now only flood such packets to router ports, this is no longer acceptable. Reported-by:
Michael Guntsche <mike@it-loops.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
David S. Miller authored
Merge branch 'for-davem' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
-
- 05 Jul, 2011 20 commits
-
-
Sven Eckelmann authored
The version number of modules build outside of the tree can get revision numbers added. This is useful to give hints about the revision of a distribution package and the used patchset. The prepended source number or branch name doesn't add any additional information which would help to identify problems and can therefore be omitted. Signed-off-by:
Sven Eckelmann <sven@narfation.org> Signed-off-by:
Marek Lindner <lindner_marek@yahoo.de>
-
Marek Lindner authored
The packet aggregation needs to ensure that only compatible packets are aggregated. Some of the checks are based on the interface number while assuming that the first interface also is the primary interface which is not always the case. This patch addresses the issue by using the primary_if pointer. Reported-by:
Antonio Quartulli <ordex@autistici.org> Signed-off-by:
-
Marek Lindner authored
The primary interface OGM has to be broadcasted on all hard-interfaces even if the primary interface is not the first interface (if_num = 0). Therefore the code has to compare the originating interface with the primary interface instead of checking the if_num. Reported-by:
Linus Luessing <linus.luessing@web.de> Signed-off-by:
-
Antonio Quartulli authored
now tt_local_event() takes a flags argument instead of a sequence of boolean values which would grow up with the time. Signed-off-by:
-
Antonio Quartulli authored
In order to make possible to use the broadcast list for delayed sendings the "delay" parameter is now provided instead of using 1 as hardcoded value. Signed-off-by:
-
Antonio Quartulli authored
The tt_local_entry structure now has a 'flags' field. This helps to unify the flags format to all the client related structures (tt_global_entry and tt_change). The 'never_purge' field is now encoded in the 'flags' one. To optimise the usage of this field, its length has been increased to 16bit in order to use the eight leading bits (from 0 to 7) to store flags that have to be sent on the wire, while the eight ending ones are used for local computation only. Moreover 'enum tt_change_flags' is now called 'enum tt_client_flags' and the defined values apply to the tt_local_entry, tt_global_entry and the tt_change 'flags' field. Signed-off-by:
-
Yaniv Rosner authored
Clear warning message "MDC/MDIO access timeout" during first driver load by setting MDIO clock. This warning has no significant meaning, since it occurs prior to the first PHY initialization. Signed-off-by:
Yaniv Rosner <yanivr@broadcom.com> Signed-off-by:
Eilon Greenstein <eilong@broadcom.com> Signed-off-by:
-
Yaniv Rosner authored
Add autogrEEEn support on BCM84833 and 54618se, which allows to reduce power consumption. Signed-off-by:
-
Yaniv Rosner authored
Signed-off-by:
-
Yaniv Rosner authored
When driver is unloaded, disable PMD in addition to TX laser, provided that the management firmware will be able to enable it back. Signed-off-by:
-
Yaniv Rosner authored
Add hardware PHY reset action for BCM578xx when fan failure occur. The new bnx2x_warpcore_hw_reset warps bnx2x_warpcore_power_module to fit the .hw_reset function template of the phy structure. Signed-off-by:
-
Yaniv Rosner authored
Add CL37 BAM support according to configuration. Signed-off-by:
-
Yaniv Rosner authored
Change 1G copper PHY BCM54616S to BCM54618SE since we only have HW with latter one of the two. Signed-off-by:
-
Yaniv Rosner authored
Set the source MAC address for PFC packets and update its status during PMF migration. Signed-off-by:
-
Kristoffer Glembo authored
The MAC address was set using the signed char sockaddr->sa_addr field and thus the address could be corrupted through sign extension. Signed-off-by:
Kristoffer Glembo <kristoffer@gaisler.com> Signed-off-by:
-
Marcus Meissner authored
Hi, Reinhard Max also pointed out that the error should EAFNOSUPPORT according to POSIX. The Linux manpages have it as EINVAL, some other OSes (Minix, HPUX, perhaps BSD) use EAFNOSUPPORT. Windows uses WSAEFAULT according to MSDN. Other protocols error values in their af bind() methods in current mainline git as far as a brief look shows: EAFNOSUPPORT: atm, appletalk, l2tp, llc, phonet, rxrpc EINVAL: ax25, bluetooth, decnet, econet, ieee802154, iucv, netlink, netrom, packet, rds, rose, unix, x25, No check?: can/raw, ipv6/raw, irda, l2tp/l2tp_ip Ciao, Marcus Signed-off-by:
Marcus Meissner <meissner@suse.de> Cc: Reinhard Max <max@suse.de> Signed-off-by:
-
Tobias Klauser authored
Signed-off-by:
Tobias Klauser <tklauser@distanz.ch> Signed-off-by:
-
Tobias Klauser authored
Signed-off-by:
-
Tobias Klauser authored
Signed-off-by:
-
Tobias Klauser authored
Signed-off-by:
-
