- 19 May, 2016 4 commits
-
-
Ian Campbell authored
[ Upstream commit dedc58e0 ] The peer may be expecting a reply having sent a request and then done a shutdown(SHUT_WR), so tearing down the whole socket at this point seems wrong and breaks for me with a client which does a SHUT_WR. Looking at other socket family's stream_recvmsg callbacks doing a shutdown here does not seem to be the norm and removing it does not seem to have had any adverse effects that I can see. I'm using Stefan's RFC virtio transport patches, I'm unsure of the impact on the vmci transport. Signed-off-by:
Ian Campbell <ian.campbell@docker.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Stefan Hajnoczi <stefanha@redhat.com> Cc: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com> Cc: Andy King <acking@vmware.com> Cc: Dmitry Torokhov <dtor@vmware.com> Cc: Jorgen Hansen <jhansen@vmware.com> Cc: Adit Ranadive <aditr@vmware.com> Cc: netdev@vger.kernel.org Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Jiri Slaby <jslaby@suse.cz>
-
Kangjie Lu authored
[ Upstream commit 5f8e4474 ] The stack object “map” has a total size of 32 bytes. Its last 4 bytes are padding generated by compiler. These padding bytes are not initialized and sent out via “nla_put”. Signed-off-by:
Kangjie Lu <kjlu@gatech.edu> Signed-off-by:
-
Kangjie Lu authored
[ Upstream commit b8670c09 ] The stack object “info” has a total size of 12 bytes. Its last byte is padding which is not initialized and leaked via “put_cmsg”. Signed-off-by:
-
Neil Horman authored
[ Upstream commit 6071bd1a ] This was recently reported to me, and reproduced on the latest net kernel, when attempting to run netperf from a host that had a netem qdisc attached to the egress interface: [ 788.073771] ---------------------[ cut here ]--------------------------- [ 788.096716] WARNING: at net/core/dev.c:2253 skb_warn_bad_offload+0xcd/0xda() [ 788.129521] bnx2: caps=(0x00000001801949b3, 0x0000000000000000) len=2962 data_len=0 gso_size=1448 gso_type=1 ip_summed=3 [ 788.182150] Modules linked in: sch_netem kvm_amd kvm crc32_pclmul ipmi_ssif ghash_clmulni_intel sp5100_tco amd64_edac_mod aesni_intel lrw gf128mul glue_helper ablk_helper edac_mce_amd cryptd pcspkr sg edac_core hpilo ipmi_si i2c_piix4 k10temp fam15h_power hpwdt ipmi_msghandler shpchp acpi_power_meter pcc_cpufreq nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs libcrc32c sd_mod crc_t10dif crct10dif_generic mgag200 syscopyarea sysfillrect sysimgblt i2c_algo_bit drm_kms_helper ahci ata_generic pata_acpi ttm libahci crct10dif_pclmul pata_atiixp tg3 libata crct10dif_common drm crc32c_intel ptp serio_raw bnx2 r8169 hpsa pps_core i2c_core mii dm_mirror dm_region_hash dm_log dm_mod [ 788.465294] CPU: 16 PID: 0 Comm: swapper/16 Tainted: G W ------------ 3.10.0-327.el7.x86_64 #1 [ 788.511521] Hardware name: HP ProLiant DL385p Gen8, BIOS A28 12/17/2012 [ 788.542260] ffff880437c036b8 f7afc56532a53db9 ffff880437c03670 ffffffff816351f1 [ 788.576332] ffff880437c036a8 ffffffff8107b200 ffff880633e74200 ffff880231674000 [ 788.611943] 0000000000000001 0000000000000003 0000000000000000 ffff880437c03710 [ 788.647241] Call Trace: [ 788.658817] <IRQ> [<ffffffff816351f1>] dump_stack+0x19/0x1b [ 788.686193] [<ffffffff8107b200>] warn_slowpath_common+0x70/0xb0 [ 788.713803] [<ffffffff8107b29c>] warn_slowpath_fmt+0x5c/0x80 [ 788.741314] [<ffffffff812f92f3>] ? ___ratelimit+0x93/0x100 [ 788.767018] [<ffffffff81637f49>] skb_warn_bad_offload+0xcd/0xda [ 788.796117] [<ffffffff8152950c>] skb_checksum_help+0x17c/0x190 [ 788.823392] [<ffffffffa01463a1>] netem_enqueue+0x741/0x7c0 [sch_netem] [ 788.854487] [<ffffffff8152cb58>] dev_queue_xmit+0x2a8/0x570 [ 788.880870] [<ffffffff8156ae1d>] ip_finish_output+0x53d/0x7d0 ... The problem occurs because netem is not prepared to handle GSO packets (as it uses skb_checksum_help in its enqueue path, which cannot manipulate these frames). The solution I think is to simply segment the skb in a simmilar fashion to the way we do in __dev_queue_xmit (via validate_xmit_skb), with some minor changes. When we decide to corrupt an skb, if the frame is GSO, we segment it, corrupt the first segment, and enqueue the remaining ones. tested successfully by myself on the latest net kernel, to which this applies [js] backport to 3.12: no qdisc_qstats_drop yet, update directly. Also use qdisc_tree_decrease_qlen instead of qdisc_tree_reduce_backlog. Signed-off-by:
Neil Horman <nhorman@tuxdriver.com> CC: Jamal Hadi Salim <jhs@mojatatu.com> CC: "David S. Miller" <davem@davemloft.net> CC: netem@lists.linux-foundation.org CC: eric.dumazet@gmail.com CC: stephen@networkplumber.org Acked-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
- 18 May, 2016 10 commits
-
-
Eric Dumazet authored
[ Upstream commit fc96256c ] When multiple skb are TX-completed in a row, we might incorrectly keep a timestamp of a prior skb and cause extra work. Fixes: ec693d47 ("net/mlx4_en: Add HW timestamping (TS) support") Signed-off-by:
Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by:
-
Paolo Abeni authored
[ Upstream commit 391a2033 ] After commit fbd40ea0 ("ipv4: Don't do expensive useless work during inetdev destroy.") when deleting an interface, fib_del_ifaddr() can be executed without any primary address present on the dead interface. The above is safe, but triggers some "bug: prim == NULL" warnings. This commit avoids warning if the in_dev is dead Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
-
Ben Hutchings authored
[ Upstream commit f43bfaed ] atl2 includes NETIF_F_SG in hw_features even though it has no support for non-linear skbs. This bug was originally harmless since the driver does not claim to implement checksum offload and that used to be a requirement for SG. Now that SG and checksum offload are independent features, if you explicitly enable SG *and* use one of the rare protocols that can use SG without checkusm offload, this potentially leaks sensitive information (before you notice that it just isn't working). Therefore this obscure bug has been designated CVE-2016-2117. Reported-by:
Justin Yackoski <jyackoski@crypto-nite.com> Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Fixes: ec5f0615 ("net: Kill link between CSUM and SG features.") Signed-off-by:
-
Mathias Krause authored
[ Upstream commit 309cf37f ] Because we miss to wipe the remainder of i->addr[] in packet_mc_add(), pdiag_put_mclist() leaks uninitialized heap bytes via the PACKET_DIAG_MCLIST netlink attribute. Fix this by explicitly memset(0)ing the remaining bytes in i->addr[]. Fixes: eea68e2f ("packet: Report socket mclist info via diag module") Signed-off-by:
Mathias Krause <minipli@googlemail.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Pavel Emelyanov <xemul@parallels.com> Acked-by:
Pavel Emelyanov <xemul@virtuozzo.com> Signed-off-by:
-
Chris Friesen authored
[ Upstream commit d6d5e999 ] For local routes that require a particular output interface we do not want to cache the result. Caching the result causes incorrect behaviour when there are multiple source addresses on the interface. The end result being that if the intended recipient is waiting on that interface for the packet he won't receive it because it will be delivered on the loopback interface and the IP_PKTINFO ipi_ifindex will be set to the loopback interface as well. This can be tested by running a program such as "dhcp_release" which attempts to inject a packet on a particular interface so that it is received by another program on the same board. The receiving process should see an IP_PKTINFO ipi_ifndex value of the source interface (e.g., eth1) instead of the loopback interface (e.g., lo). The packet will still appear on the loopback interface in tcpdump but the important aspect is that the CMSG info is correct. Sample dhcp_release command line: dhcp_release eth1 192.168.204.222 02:11:33:22:44:66 Signed-off-by:
Allain Legacy <allain.legacy@windriver.com> Signed off-by: Chris Friesen <chris.friesen@windriver.com> Reviewed-by:
Julian Anastasov <ja@ssi.bg> Signed-off-by:
-
David S. Miller authored
[ Upstream commit a36a0d40 ] In particular, make sure we check for decnet private presence for loopback devices. Signed-off-by:
-
Paolo Abeni authored
[ Upstream commit 626abd59 ] Currently, when creating or updating a route, no check is performed in both ipv4 and ipv6 code to the hoplimit value. The caller can i.e. set hoplimit to 256, and when such route will be used, packets will be sent with hoplimit/ttl equal to 0. This commit adds checks for the RTAX_HOPLIMIT value, in both ipv4 ipv6 route code, substituting any value greater than 255 with 255. This is consistent with what is currently done for ADVMSS and MTU in the ipv4 code. [js] backport to 3.12: no ip6_convert_metrics yet, fix applied to ip6_route_add directly. Signed-off-by:
-
Tony Lindgren authored
commit d8a50941 upstream. We get a NULL pointer dereference on omap3 for thumb2 compiled kernels: Internal error: Oops: 80000005 [#1] SMP THUMB2 ... [<c046497b>] (_raw_spin_unlock_irqrestore) from [<c0024375>] (omap3_enter_idle_bm+0xc5/0x178) [<c0024375>] (omap3_enter_idle_bm) from [<c0374e63>] (cpuidle_enter_state+0x77/0x27c) [<c0374e63>] (cpuidle_enter_state) from [<c00627f1>] (cpu_startup_entry+0x155/0x23c) [<c00627f1>] (cpu_startup_entry) from [<c06b9a47>] (start_kernel+0x32f/0x338) [<c06b9a47>] (start_kernel) from [<8000807f>] (0x8000807f) The power management related assembly on omaps needs to interact with ARM mode bootrom code, so we need to keep most of the related assembly in ARM mode. Turns out this error is because of missing ENDPROC for assembly code as suggested by Stephen Boyd <sboyd@codeaurora.org>. Let's fix the problem by adding ENDPROC in two places to sleep34xx.S. Let's also remove the now duplicate custom code for mode switching. This has been unnecessary since commit 6ebbf2ce ("ARM: convert all "mov.* pc, reg" to "bx reg" for ARMv6+"). And let's also remove the comments about local variables, they are now just confusing after the ENDPROC. The reason why ENDPROC makes a difference is it sets .type and then the compiler knows what to do with the thumb bit as explained at: https://wiki.ubuntu.com/ARM/Thumb2PortingHowtoReported-by:
Kevin Hilman <khilman@kernel.org> Tested-by:
Kevin Hilman <khilman@linaro.org> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Daniel Vetter authored
commit 2700818a upstream. LPT is pch, so might run into the fdi bandwidth constraint (especially since it has only 2 lanes). But right now we just force pipe_bpp back to 24, resulting in a nice loop (which we bail out with a loud WARN_ON). Fix this. Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> References: https://bugs.freedesktop.org/show_bug.cgi?id=93477Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Tested-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1462264381-7573-1-git-send-email-daniel.vetter@ffwll.ch (cherry picked from commit f58a1acc) Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Lucas Stach authored
commit e3c00d87 upstream. On DCE6.1 PPLL2 is exclusively available to UNIPHYA, so it should not be taken into consideration when looking for an already enabled PLL to be shared with other outputs. This fixes the broken VGA port (TRAVIS DP->VGA bridge) on my Richland based laptop, where the internal display is connected to UNIPHYA through a TRAVIS DP->LVDS bridge. Bug: https://bugs.freedesktop.org/show_bug.cgi?id=78987 v2: agd: add check in radeon_get_shared_nondp_ppll as well, drop extra parameter. Signed-off-by:
Lucas Stach <dev@lynxeye.de> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
- 16 May, 2016 4 commits
-
-
Andi Kleen authored
commit a99aa42d upstream. Mark variables referenced from assembler files visible. This fixes compile problems with LTO. Cc: Jaroslav Kysela <perex@perex.cz> Signed-off-by:
Andi Kleen <ak@linux.intel.com> Link: http://lkml.kernel.org/r/1391845930-28580-4-git-send-email-ak@linux.intel.comSigned-off-by:
H. Peter Anvin <hpa@linux.intel.com> Cc: Christoph Biedl <linux-kernel.bfrz@manchmal.in-ulm.de> Signed-off-by:
-
Marek Szyprowski authored
commit 6ae645d5 upstream. NULL pointer derefence happens when booting with DTB because the platform data for haptic device is not set in supplied data from parent MFD device. The MFD device creates only platform data (from Device Tree) for itself, not for haptic child. Unable to handle kernel NULL pointer dereference at virtual address 0000009c pgd = c0004000 [0000009c] *pgd=00000000 Internal error: Oops: 5 [#1] PREEMPT SMP ARM (max8997_haptic_probe) from [<c03f9cec>] (platform_drv_probe+0x4c/0xb0) (platform_drv_probe) from [<c03f8440>] (driver_probe_device+0x214/0x2c0) (driver_probe_device) from [<c03f8598>] (__driver_attach+0xac/0xb0) (__driver_attach) from [<c03f67ac>] (bus_for_each_dev+0x68/0x9c) (bus_for_each_dev) from [<c03f7a38>] (bus_add_driver+0x1a0/0x218) (bus_add_driver) from [<c03f8db0>] (driver_register+0x78/0xf8) (driver_register) from [<c0101774>] (do_one_initcall+0x90/0x1d8) (do_one_initcall) from [<c0a00dbc>] (kernel_init_freeable+0x15c/0x1fc) (kernel_init_freeable) from [<c06bb5b4>] (kernel_init+0x8/0x114) (kernel_init) from [<c0107938>] (ret_from_fork+0x14/0x3c) Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Fixes: 104594b0 ("Input: add driver support for MAX8997-haptic") [k.kozlowski: Write commit message, add CC-stable] Signed-off-by:
Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Al Viro authored
commit 99d82582 upstream. Payloads of NM entries are not supposed to contain NUL. When we run into such, only the part prior to the first NUL goes into the concatenation (i.e. the directory entry name being encoded by a bunch of NM entries). We do stop when the amount collected so far + the claimed amount in the current NM entry exceed 254. So far, so good, but what we return as the total length is the sum of *claimed* sizes, not the actual amount collected. And that can grow pretty large - not unlimited, since you'd need to put CE entries in between to be able to get more than the maximum that could be contained in one isofs directory entry / continuation chunk and we are stop once we'd encountered 32 CEs, but you can get about 8Kb easily. And that's what will be passed to readdir callback as the name length. 8Kb __copy_to_user() from a buffer allocated by __get_free_page() Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Herbert Xu authored
commit 13f4bb78 upstream. The crypto hash walk code is broken when supplied with an offset greater than or equal to PAGE_SIZE. This patch fixes it by adjusting walk->pg and walk->offset when this happens. Reported-by:
Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
- 13 May, 2016 2 commits
-
-
Konstantin Khlebnikov authored
commit 4d88e6f7 upstream. If CONFIG_BALLOON_COMPACTION=n balloon_page_insert() does not link pages with balloon and doesn't set PagePrivate flag, as a result balloon_page_dequeue() cannot get any pages because it thinks that all of them are isolated. Without balloon compaction nobody can isolate ballooned pages. It's safe to remove this check. Fixes: d6d86c0a ("mm/balloon_compaction: redesign ballooned pages management"). Signed-off-by:
Konstantin Khlebnikov <k.khlebnikov@samsung.com> Reported-by:
Matt Mullins <mmullins@mmlx.us> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Cc: Gavin Guo <gavin.guo@canonical.com> Signed-off-by:
-
Konstantin Khlebnikov authored
commit d6d86c0a upstream. Sasha Levin reported KASAN splash inside isolate_migratepages_range(). Problem is in the function __is_movable_balloon_page() which tests AS_BALLOON_MAP in page->mapping->flags. This function has no protection against anonymous pages. As result it tried to check address space flags inside struct anon_vma. Further investigation shows more problems in current implementation: * Special branch in __unmap_and_move() never works: balloon_page_movable() checks page flags and page_count. In __unmap_and_move() page is locked, reference counter is elevated, thus balloon_page_movable() always fails. As a result execution goes to the normal migration path. virtballoon_migratepage() returns MIGRATEPAGE_BALLOON_SUCCESS instead of MIGRATEPAGE_SUCCESS, move_to_new_page() thinks this is an error code and assigns newpage->mapping to NULL. Newly migrated page lose connectivity with balloon an all ability for further migration. * lru_lock erroneously required in isolate_migratepages_range() for isolation ballooned page. This function releases lru_lock periodically, this makes migration mostly impossible for some pages. * balloon_page_dequeue have a tight race with balloon_page_isolate: balloon_page_isolate could be executed in parallel with dequeue between picking page from list and locking page_lock. Race is rare because they use trylock_page() for locking. This patch fixes all of them. Instead of fake mapping with special flag this patch uses special state of page->_mapcount: PAGE_BALLOON_MAPCOUNT_VALUE = -256. Buddy allocator uses PAGE_BUDDY_MAPCOUNT_VALUE = -128 for similar purpose. Storing mark directly in struct page makes everything safer and easier. PagePrivate is used to mark pages present in page list (i.e. not isolated, like PageLRU for normal pages). It replaces special rules for reference counter and makes balloon migration similar to migration of normal pages. This flag is protected by page_lock together with link to the balloon device. [js] backport to 3.12. MIGRATEPAGE_BALLOON_SUCCESS had to be removed from one more place. VM_BUG_ON_PAGE does not exist in 3.12 yet, use plain VM_BUG_ON. Signed-off-by:
Sasha Levin <sasha.levin@oracle.com> Link: http://lkml.kernel.org/p/53E6CEAA.9020105@oracle.com Cc: Rafael Aquini <aquini@redhat.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Signed-off-by:
-
- 11 May, 2016 20 commits
-
-
Takashi Iwai authored
commit f5d75341 upstream. Nowadays the machines without i8042 controller is popular, and no need to print "No controller found" message in the error log level, which annoys at booting in quiet mode. Let's lower it info level. Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Anton Blanchard authored
commit 6997e57d upstream. The REAL_LE feature entry in the ibm_pa_feature struct is missing an MMU feature value, meaning all the remaining elements initialise the wrong values. This means instead of checking for byte 5, bit 0, we check for byte 0, bit 0, and then we incorrectly set the CPU feature bit as well as MMU feature bit 1 and CPU user feature bits 0 and 2 (5). Checking byte 0 bit 0 (IBM numbering), means we're looking at the "Memory Management Unit (MMU)" feature - ie. does the CPU have an MMU. In practice that bit is set on all platforms which have the property. This means we set CPU_FTR_REAL_LE always. In practice that seems not to matter because all the modern cpus which have this property also implement REAL_LE, and we've never needed to disable it. We're also incorrectly setting MMU feature bit 1, which is: #define MMU_FTR_TYPE_8xx 0x00000002 Luckily the only place that looks for MMU_FTR_TYPE_8xx is in Book3E code, which can't run on the same cpus as scan_features(). So this also doesn't matter in practice. Finally in the CPU user feature mask, we're setting bits 0 and 2. Bit 2 is not currently used, and bit 0 is: #define PPC_FEATURE_PPC_LE 0x00000001 Which says the CPU supports the old style "PPC Little Endian" mode. Again this should be harmless in practice as no 64-bit CPUs implement that mode. Fix the code by adding the missing initialisation of the MMU feature. Also add a comment marking CPU user feature bit 2 (0x4) as reserved. It would be unsafe to start using it as old kernels incorrectly set it. Fixes: 44ae3ab3 ("powerpc: Free up some CPU feature bits by moving out MMU-related features") Signed-off-by:
Anton Blanchard <anton@samba.org> [mpe: Flesh out changelog, add comment reserving 0x4] Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Andrey Gelman authored
commit 879f2fea upstream. According to the touch controller spec, SPI return a 16 bit value, only 12 bits are valid, they are bit[14-3]. The value of MISO and MOSI can be configured when SPI is in idle mode. Currently this touch driver assumes the SPI bus sets the MOSI and MISO in low level when SPI bus is in idle mode. So the bit[15] of the value got from SPI bus is always 0. But when SPI bus congfigures the MOSI and MISO in high level during the SPI idle mode, the bit[15] of the value get from SPI is always 1. If bit[15] is not masked, we may get the wrong value. Mask the invalid bit to make sure the correct value gets returned. Regardless of the SPI bus idle configuration. Signed-off-by:
Andrey Gelman <andrey.gelman@compulab.co.il> Signed-off-by:
Haibo Chen <haibo.chen@freescale.com> Signed-off-by:
Igor Grinberg <grinberg@compulab.co.il> Signed-off-by:
-
Krzysztof Kozlowski authored
commit 07d2390e upstream. In certain probe conditions the interrupt came right after registering the handler causing a NULL pointer exception because of uninitialized waitqueue: $ udevadm trigger i2c-gpio i2c-gpio-1: using pins 143 (SDA) and 144 (SCL) i2c-gpio i2c-gpio-3: using pins 53 (SDA) and 52 (SCL) Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = e8b38000 [00000000] *pgd=00000000 Internal error: Oops: 5 [#1] SMP ARM Modules linked in: snd_soc_i2s(+) i2c_gpio(+) snd_soc_idma snd_soc_s3c_dma snd_soc_core snd_pcm_dmaengine snd_pcm snd_timer snd soundcore ac97_bus spi_s3c64xx pwm_samsung dwc2 exynos_adc phy_exynos_usb2 exynosdrm exynos_rng rng_core rtc_s3c CPU: 0 PID: 717 Comm: data-provider-m Not tainted 4.6.0-rc1-next-20160401-00011-g1b8d87473b9e-dirty #101 Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) (...) (__wake_up_common) from [<c0379624>] (__wake_up+0x38/0x4c) (__wake_up) from [<c0a41d30>] (ak8975_irq_handler+0x28/0x30) (ak8975_irq_handler) from [<c0386720>] (handle_irq_event_percpu+0x88/0x140) (handle_irq_event_percpu) from [<c038681c>] (handle_irq_event+0x44/0x68) (handle_irq_event) from [<c0389c40>] (handle_edge_irq+0xf0/0x19c) (handle_edge_irq) from [<c0385e04>] (generic_handle_irq+0x24/0x34) (generic_handle_irq) from [<c05ee360>] (exynos_eint_gpio_irq+0x50/0x68) (exynos_eint_gpio_irq) from [<c0386720>] (handle_irq_event_percpu+0x88/0x140) (handle_irq_event_percpu) from [<c038681c>] (handle_irq_event+0x44/0x68) (handle_irq_event) from [<c0389a70>] (handle_fasteoi_irq+0xb4/0x194) (handle_fasteoi_irq) from [<c0385e04>] (generic_handle_irq+0x24/0x34) (generic_handle_irq) from [<c03860b4>] (__handle_domain_irq+0x5c/0xb4) (__handle_domain_irq) from [<c0301774>] (gic_handle_irq+0x54/0x94) (gic_handle_irq) from [<c030c910>] (__irq_usr+0x50/0x80) The bug was reproduced on exynos4412-trats2 (with a max77693 device also using i2c-gpio) after building max77693 as a module. Fixes: 94a6d5cf ("iio:ak8975 Implement data ready interrupt handling") Signed-off-by:
Gregor Boirie <gregor.boirie@parrot.com> Signed-off-by:
Jonathan Cameron <jic23@kernel.org> Signed-off-by:
-
Jasem Mutlaq authored
commit 613ac23a upstream. Adding VID:PID for Straizona Focusers to cp210x driver. Signed-off-by:
Jasem Mutlaq <mutlaqja@ikarustech.com> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Mike Manning authored
commit 1d377f4d upstream. The Link ECU is an aftermarket ECU computer for vehicles that provides full tuning abilities as well as datalogging and displaying capabilities via the USB to Serial adapter built into the device. Signed-off-by:
Mike Manning <michael@bsch.com.au> Signed-off-by:
-
Prarit Bhargava authored
commit 93d68841 upstream. ACPICA commit 7a3bd2d962f221809f25ddb826c9e551b916eb25 Set the mutex owner thread ID. Original patch from: Prarit Bhargava <prarit@redhat.com> Link: https://bugzilla.kernel.org/show_bug.cgi?id=115121 Link: https://github.com/acpica/acpica/commit/7a3bd2d9Signed-off-by:
Prarit Bhargava <prarit@redhat.com> Tested-by: Andy Lutomirski <luto@kernel.org> # On a Dell XPS 13 9350 Signed-off-by:
Bob Moore <robert.moore@intel.com> Signed-off-by:
Lv Zheng <lv.zheng@intel.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Wang YanQing authored
commit c10fcb14 upstream. The code for checking whether a BAR address range is valid will break out of the loop when a start address of 0x0 is encountered. This behaviour is wrong since by breaking out of the loop we may miss the BAR that describes the EFI frame buffer in a later iteration. Because of this bug I can't use video=efifb: boot parameter to get efifb on my new ThinkPad E550 for my old linux system hard disk with 3.10 kernel. In 3.10, efifb is the only choice due to DRM/I915 not supporting the GPU. This patch also add a trivial optimization to break out after we find the frame buffer address range without testing later BARs. Signed-off-by:
Wang YanQing <udknight@gmail.com> [ Rewrote changelog. ] Signed-off-by:
Matt Fleming <matt@codeblueprint.co.uk> Reviewed-by:
Peter Jones <pjones@redhat.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: David Herrmann <dh.herrmann@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/1462454061-21561-2-git-send-email-matt@codeblueprint.co.ukSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Matt Fleming authored
commit e8dfe6d8 upstream. Mark reported that having asterisks on the end of directory names confuses get_maintainer.pl when it encounters subdirectories, and that my name does not appear when run on drivers/firmware/efi/libstub. Reported-by:
Mark Rutland <mark.rutland@arm.com> Signed-off-by:
-
Sven Eckelmann authored
commit d1a65f17 upstream. _batadv_update_route rcu_derefences orig_ifinfo->router outside of a spinlock protected region to print some information messages to the debug log. But this pointer is not checked again when the new pointer is assigned in the spinlock protected region. Thus is can happen that the value of orig_ifinfo->router changed in the meantime and thus the reference counter of the wrong router gets reduced after the spinlock protected region. Just rcu_dereferencing the value of orig_ifinfo->router inside the spinlock protected region (which also set the new pointer) is enough to get the correct old router object. Fixes: e1a5382f ("batman-adv: Make orig_node->router an rcu protected pointer") Signed-off-by:
Sven Eckelmann <sven@narfation.org> Signed-off-by:
Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by:
Antonio Quartulli <a@unstable.cc> Signed-off-by:
-
Linus Lüssing authored
commit c4fdb6cf upstream. When removing a single interface while a broadcast or ogm packet is still pending then we will free the forward packet without releasing the queue slots again. This patch is supposed to fix this issue. Fixes: 6d5808d4 ("batman-adv: Add missing hardif_free_ref in forw_packet_free") Signed-off-by:
Linus Lüssing <linus.luessing@c0d3.blue> [sven@narfation.org: fix conflicts with current version] Signed-off-by:
-
Sven Eckelmann authored
commit c7829666 upstream. The encapsulated ethernet and VLAN header may be outside the received ethernet frame. Thus the skb buffer size has to be checked before it can be parsed to find out if it encapsulates another batman-adv packet. Fixes: 42019357 ("batman-adv: softif bridge loop avoidance") Signed-off-by:
-
Mathias Krause authored
commit 8148a73c upstream. If /proc/<PID>/environ gets read before the envp[] array is fully set up in create_{aout,elf,elf_fdpic,flat}_tables(), we might end up trying to read more bytes than are actually written, as env_start will already be set but env_end will still be zero, making the range calculation underflow, allowing to read beyond the end of what has been written. Fix this as it is done for /proc/<PID>/cmdline by testing env_end for zero. It is, apparently, intentionally set last in create_*_tables(). This bug was found by the PaX size_overflow plugin that detected the arithmetic underflow of 'this_len = env_end - (env_start + src)' when env_end is still zero. The expected consequence is that userland trying to access /proc/<PID>/environ of a not yet fully set up process may get inconsistent data as we're in the middle of copying in the environment variables. Fixes: https://forums.grsecurity.net/viewtopic.php?f=3&t=4363 Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=116461Signed-off-by:
-
Sascha Hauer authored
commit 5616f367 upstream. The secondary CPU starts up in ARM mode. When the kernel is compiled in thumb2 mode we have to explicitly compile the secondary startup trampoline in ARM mode, otherwise the CPU will go to Nirvana. Signed-off-by:
Sascha Hauer <s.hauer@pengutronix.de> Reported-by:
Steffen Trumtrar <s.trumtrar@pengutronix.de> Suggested-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
Dinh Nguyen <dinguyen@opensource.altera.com> Signed-off-by:
Kevin Hilman <khilman@baylibre.com> Signed-off-by:
-
Arnd Bergmann authored
commit aeb6641f upstream. gcc-6 complains about the indentation of the lpfc_destroy_vport_work_array() call in lpfc_online(), which clearly doesn't look right: drivers/scsi/lpfc/lpfc_init.c: In function 'lpfc_online': drivers/scsi/lpfc/lpfc_init.c:2880:3: warning: statement is indented as if it were guarded by... [-Wmisleading-indentation] lpfc_destroy_vport_work_array(phba, vports); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/scsi/lpfc/lpfc_init.c:2863:2: note: ...this 'if' clause, but it is not if (vports != NULL) ^~ Looking at the patch that introduced this code, it's clear that the behavior is correct and the indentation is wrong. This fixes the indentation and adds curly braces around the previous if() block for clarity, as that is most likely what caused the code to be misindented in the first place. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Fixes: 549e55cd ("[SCSI] lpfc 8.2.2 : Fix locking around HBA's port_list") Reviewed-by:
Sebastian Herbszt <herbszt@gmx.de> Reviewed-by:
Hannes Reinecke <hare@suse.com> Reviewed-by:
Ewan D. Milne <emilne@redhat.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Linus Walleij authored
commit ec7957a6 upstream. Despite care take to allocate clocks state containers the SP810 driver actually just supports creating one instance: all clocks registered for every instance will end up with the exact same name and __clk_init() will fail. Rename the timclken<0> .. timclken<n> to sp810_<instance>_<n> so every clock on every instance gets a unique name. This is necessary for the RealView PBA8 which has two SP810 blocks: the second block will not register its clocks unless every clock on every instance is unique and results in boot logs like this: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at ../drivers/clk/versatile/clk-sp810.c:137 clk_sp810_of_setup+0x110/0x154() Modules linked in: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.5.0-rc2-00030-g352718fc39f6-dirty #225 Hardware name: ARM RealView Machine (Device Tree Support) [<c00167f8>] (unwind_backtrace) from [<c0013204>] (show_stack+0x10/0x14) [<c0013204>] (show_stack) from [<c01a049c>] (dump_stack+0x84/0x9c) [<c01a049c>] (dump_stack) from [<c0024990>] (warn_slowpath_common+0x74/0xb0) [<c0024990>] (warn_slowpath_common) from [<c0024a68>] (warn_slowpath_null+0x1c/0x24) [<c0024a68>] (warn_slowpath_null) from [<c051eb44>] (clk_sp810_of_setup+0x110/0x154) [<c051eb44>] (clk_sp810_of_setup) from [<c051e3a4>] (of_clk_init+0x12c/0x1c8) [<c051e3a4>] (of_clk_init) from [<c0504714>] (time_init+0x20/0x2c) [<c0504714>] (time_init) from [<c0501b18>] (start_kernel+0x244/0x3c4) [<c0501b18>] (start_kernel) from [<7000807c>] (0x7000807c) ---[ end trace cb88537fdc8fa200 ]--- Cc: Michael Turquette <mturquette@baylibre.com> Cc: Pawel Moll <pawel.moll@arm.com> Fixes: 6e973d2c "clk: vexpress: Add separate SP810 driver" Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org> Signed-off-by:
-
Dan Streetman authored
commit da6ccaaa upstream. Make the "Attempted send on closed socket" error messages generated in nbd_request_handler() ratelimited. When the nbd socket is shutdown, the nbd_request_handler() function emits an error message for every request remaining in its queue. If the queue is large, this will spam a large amount of messages to the log. There's no need for a separate error message for each request, so this patch ratelimits it. In the specific case this was found, the system was virtual and the error messages were logged to the serial port, which overwhelmed it. Fixes: 4d48a542 ("nbd: fix I/O hang on disconnected nbds") Signed-off-by:
Dan Streetman <dan.streetman@canonical.com> Signed-off-by:
Markus Pargmann <mpa@pengutronix.de> Signed-off-by:
-
Marco Angaroni authored
commit 7617a24f upstream. The IPVS SIP persistence engine is not able to parse the SIP header "Call-ID" when such header is inserted in the first positions of the SIP message. When IPVS is configured with "--pe sip" option, like for example: ipvsadm -A -u 1.2.3.4:5060 -s rr --pe sip -p 120 -o some particular messages (see below for details) do not create entries in the connection template table, which can be listed with: ipvsadm -Lcn --persistent-conn Problematic SIP messages are SIP responses having "Call-ID" header positioned just after message first line: SIP/2.0 200 OK [Call-ID header here] [rest of the headers] When "Call-ID" header is positioned down (after a few other headers) it is correctly recognized. This is due to the data offset used in get_callid function call inside ip_vs_pe_sip.c file: since dptr already points to the start of the SIP message, the value of dataoff should be initially 0. Otherwise the header is searched starting from some bytes after the first character of the SIP message. Fixes: 758ff033 ("IPVS: sip persistence engine") Signed-off-by:
Marco Angaroni <marcoangaroni@gmail.com> Acked-by:
Simon Horman <horms@verge.net.au> Signed-off-by:
-
Behan Webster authored
commit c4586256 upstream. Similar to the fix in 40413dcb MODULE_DEVICE_TABLE(x86cpu, ...) expects the struct to be called struct x86cpu_device_id, and not struct x86_cpu_id which is what is used in the rest of the kernel code. Although gcc seems to ignore this error, clang fails without this define to fix the name. Code from drivers/thermal/x86_pkg_temp_thermal.c static const struct x86_cpu_id __initconst pkg_temp_thermal_ids[] = { ... }; MODULE_DEVICE_TABLE(x86cpu, pkg_temp_thermal_ids); Error from clang: drivers/thermal/x86_pkg_temp_thermal.c:577:1: error: variable has incomplete type 'const struct x86cpu_device_id' MODULE_DEVICE_TABLE(x86cpu, pkg_temp_thermal_ids); ^ include/linux/module.h:145:3: note: expanded from macro 'MODULE_DEVICE_TABLE' MODULE_GENERIC_TABLE(type##_device, name) ^ include/linux/module.h:87:32: note: expanded from macro 'MODULE_GENERIC_TABLE' extern const struct gtype##_id __mod_##gtype##_table \ ^ <scratch space>:143:1: note: expanded from here __mod_x86cpu_device_table ^ drivers/thermal/x86_pkg_temp_thermal.c:577:1: note: forward declaration of 'struct x86cpu_device_id' include/linux/module.h:145:3: note: expanded from macro 'MODULE_DEVICE_TABLE' MODULE_GENERIC_TABLE(type##_device, name) ^ include/linux/module.h:87:21: note: expanded from macro 'MODULE_GENERIC_TABLE' extern const struct gtype##_id __mod_##gtype##_table \ ^ <scratch space>:141:1: note: expanded from here x86cpu_device_id ^ 1 error generated. Signed-off-by:
Behan Webster <behanw@converseincode.com> Signed-off-by:
Jan-Simon Möller <dl9pf@gmx.de> Acked-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> [added vmbus, mei, and rapdio #defines, needed for 3.14 - gregkh] Signed-off-by:
-
Paolo Bonzini authored
commit 95272c29 upstream. -ftracer can duplicate asm blocks causing compilation to fail in noclone functions. For example, KVM declares a global variable in an asm like asm("2: ... \n .pushsection data \n .global vmx_return \n vmx_return: .long 2b"); and -ftracer causes a double declaration. Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Michal Marek <mmarek@suse.cz> Cc: stable@vger.kernel.org Cc: kvm@vger.kernel.org Reported-by:
Linda Walsh <lkml@tlinx.org> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
