- 20 Jan, 2016 5 commits
-
-
Arnd Bergmann authored
A recent bug fix added code that does bool logged_out = (status & 0xFFFF); if (logged_out == CTIO_PORT_LOGGED_OUT) ... This looks wrong because we are comparing a boolean with an integer constant, ang gcc warns about it accordingly: drivers/scsi/qla2xxx/qla_target.c: In function 'qlt_do_ctio_completion': drivers/scsi/qla2xxx/qla_target.c:3587:20: warning: comparison of constant '41' with boolean expression is always false [-Wbool-compare] (logged_out == CTIO_PORT_LOGGED_OUT) ? The correct fix is presumably to make that variable an 'int'. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 71cdc079 ("qla2xxx: Delete session if initiator is gone from FW") Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
-
Sheng Yang authored
The current code only allow netlink to reach the initial network namespace, which caused trouble for any client running inside container. This patch would make sure TCMU netlink would work for all network namespaces. Signed-off-by: Sheng Yang <sheng@yasker.org> Acked-by: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
-
Nicholas Bellinger authored
This patch addresses a long standing race where obtaining se_node_acl->acl_kref in __transport_register_session() happens a bit too late, and leaves open the potential for core_tpg_del_initiator_node_acl() to hit a NULL pointer dereference. Instead, take ->acl_kref in core_tpg_get_initiator_node_acl() while se_portal_group->acl_node_mutex is held, and move the final target_put_nacl() from transport_deregister_session() into transport_free_session() so that fabric driver login failure handling using the modern method to still work as expected. Also, update core_tpg_get_initiator_node_acl() to take an extra reference for dynamically generated acls for demo-mode, before returning to fabric caller. Also update iscsi-target sendtargets special case handling to use target_tpg_has_node_acl() when checking if demo_mode_discovery == true during discovery lookup. Note the existing wait_for_completion(&acl->acl_free_comp) in core_tpg_del_initiator_node_acl() does not change. Cc: Sagi Grimberg <sagig@mellanox.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Andy Grover <agrover@redhat.com> Cc: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
-
Nicholas Bellinger authored
This patch converts core_tpg_set_initiator_node_queue_depth() to use struct se_node_acl->acl_sess_list when performing explicit se_tpg_tfo->shutdown_session() for active sessions, in order for new se_node_acl->queue_depth to take effect. This follows how core_tpg_del_initiator_node_acl() currently works when invoking se_tpg_tfo->shutdown-session(), and ahead of the next patch to take se_node_acl->acl_kref during lookup, the extra get_initiator_node_acl() can go away. In order to achieve this, go ahead and change target_get_session() to use kref_get_unless_zero() and propigate up the return value to know when a session is already being released. This is because se_node_acl->acl_group is already protecting se_node_acl->acl_group reference via configfs, and shutdown within core_tpg_del_initiator_node_acl() won't occur until sys_write() to core_tpg_set_initiator_node_queue_depth() attribute returns back to user-space. Also, drop the left-over iscsi-target hack, and obtain se_portal_group->session_lock in lio_tpg_shutdown_session() internally. Remove iscsi-target wrapper and unused se_tpg + force parameters and associated code. Reported-by: Christoph Hellwig <hch@lst.de> Cc: Sagi Grimberg <sagig@mellanox.com> Cc: Hannes Reinecke <hare@suse.de> Cc: Andy Grover <agrover@redhat.com> Cc: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
-
Nicholas Bellinger authored
This patch is a iscsi-target specific bug-fix for a dead-lock that can occur during explicit struct se_node_acl->acl_group se_session deletion via configfs rmdir(2), when iscsi-target time2retain timer is still active. It changes iscsi-target to obtain se_portal_group->session_lock internally using spin_in_locked() to check for the specific se_node_acl configfs shutdown rmdir(2) case. Note this patch is intended for stable, and the subsequent v4.5-rc patch converts target_core_tpg.c to use proper se_sess->sess_kref reference counting for both se_node_acl deletion + se_node_acl->queue_depth se_session restart. Reported-by: : Sagi Grimberg <sagig@mellanox.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Andy Grover <agrover@redhat.com> Cc: Mike Christie <michaelc@cs.wisc.edu> Cc: stable@vger.kernel.org # 3.10+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
-
- 13 Jan, 2016 2 commits
-
-
Nicholas Bellinger authored
This patch does a simple conversion of ib_srpt code to use proper modern core_tpg_get_initiator_node_acl() lookup using se_node_acl->acl_kref, and drops the legacy internal list usage from srpt_lookup_acl(). This involves doing transport_init_session() earlier, and making sure transport_free_session() is called during a se_node_acl lookup failure to drop the last ->acl_kref. Also, it adds a minor backwards-compat hack to avoid the potential for user-space wrt node-acl WWPN formatting by simply stripping off '0x' prefix from ch->sess_name, and retrying once if core_tpg_get_initiator_node_acl() fails. Finally, go ahead and drop port_acl_list port_acl_lock since they are no longer used. Cc: Vu Pham <vu@mellanox.com> Cc: Sagi Grimberg <sagig@mellanox.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
-
Nicholas Bellinger authored
This patch does a simple conversion of tcm_fc code to use proper modern core_tpg_get_initiator_node_acl() lookup using se_node_acl->acl_kref, and drops the legacy list walk from ft_acl_get(). Note the original lookup also took node_name into account, but since ft_init_nodeacl() only ever sets port_name for se_node_acl->acl_group within configfs, this is purely a mechanical change. As per HCH, go ahead and fold ft_acl_get() into original caller. Cc: Vasu Dev <vasu.dev@linux.intel.com> Cc: Sagi Grimberg <sagig@mellanox.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
-
- 07 Jan, 2016 24 commits
-
-
Bart Van Assche authored
This patch avoids that the following kernel crash can occur with later patches in this patch series: general protection fault: 0000 [#1] SMP CPU: 0 PID: 6 Comm: kworker/u8:0 Not tainted 4.3.0-rc1-debug+ #1 Workqueue: tmr-fileio target_tmr_work [target_core_mod] Call Trace: [<ffffffff810a6915>] lock_acquire+0x65/0x90 [<ffffffff815e740b>] _raw_spin_lock_irqsave+0x4b/0x60 [<ffffffffa03bc7ca>] target_release_cmd_kref+0x2a/0xa0 [target_core_mod] [<ffffffffa03bd418>] target_put_sess_cmd+0x28/0x50 [target_core_mod] [<ffffffffa03bad50>] core_tmr_lun_reset+0x390/0x640 [target_core_mod] [<ffffffffa03bce50>] target_tmr_work+0x80/0xd0 [target_core_mod] [<ffffffff81070e6d>] process_one_work+0x19d/0x430 [<ffffffff8107120f>] worker_thread+0x10f/0x460 [<ffffffff810772ba>] kthread+0xea/0x100 [<ffffffff815e7a2f>] ret_from_fork+0x3f/0x70 Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
-
Bart Van Assche authored
strsep() modifies its first argument. Make the pointer passed to kfree() match the return value of kmalloc(). Fixes: 229d4f11 (commit "target_core_alua: Referrals configfs integration") Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Cc: Hannes Reinecke <hare@suse.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Andy Grover <agrover@redhat.com> Cc: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
-
Bart Van Assche authored
Avoid truncating the tag argument of target_submit_tmr() to a 32-bit number if the caller passes a 64-bit number. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Andy Grover <agrover@redhat.com> Cc: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
-
Bart Van Assche authored
Avoid that building with W=1 triggers compiler warnings about set-but-not-used variables. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Andy Grover <agrover@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
-
Bart Van Assche authored
The num_node_acls member in struct se_portal_group is modified by several functions but is never read. Hence remove it. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Andy Grover <agrover@redhat.com> Cc: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
-
Bart Van Assche authored
Detected by smatch. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Andy Grover <agrover@redhat.com> Cc: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
-
Sheng Yang authored
The capability of setting hw_block_size was added along with 9c1cd1b6 "target/user: Only support full command pass-through", though default setting override the user specified value during the enabling of device, which called by target_configure_device() to set block_size matching hw_block_size, result in user not able to set different block size other than default 512. This patch would use existing hw_block_size value if already set, otherwise it would be set to default value(512). Update: Fix the coding style issue. (Drop unnecessary re-export of dev->dev_attrib.block_size - nab) Signed-off-by: Sheng Yang <sheng@yasker.org> Cc: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
-
Nicholas Bellinger authored
As reported by Dan, isert_create_device_ib_res() failure within isert_device_get() can potentially return a postive value, resulting in ERR_PTR() triggering a NULL pointer dereference. Caught by the static checker: drivers/infiniband/ulp/isert/ib_isert.c:423 isert_device_get() error: passing non negative 1 to ERR_PTR Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
-
Andy Grover authored
Add the 'tag' attribute to FC node ACLs. This is not used by kernel code, but gives userspace a place to store a tag string. This is used to provide support for initiator groups in targetcli. Just copy iscsi's implementation for tcm_fc. A few other fabrics that support acls also need this, to be submitted separately after the holidays. Signed-off-by: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
-
Dilip Kumar Uppugandla authored
Driver has following initialization sequence for Target mode 1. Driver initialization starts 2. ISP Abort is scheduled when the target is enabled. qla2xxx [0000:04:00.0]-4807:25: ISP abort scheduled qla2xxx [0000:04:00.0]-00af:25: Performing ISP error recovery - ha=ffff880caa9e0000. 3. DPC thread starts the ISP Abort 4. While DPC is resetting the chip and initializing the firmware, we get async events from the firmware about P2P mode, LOOP UP and PORT UPDATE. 5. PRLI from a initiator is delivered to us followed by a PLOGI and then a SCSI command which creates a session. 6. If the SCSI command is a WRITE in this case, we issue XFR RDY and it gets dropped as can be seen with messages RESET-XFR because ISP Abort is still active qla2xxx [0000:04:00.0]-e902:25: RESET-XFR active/old-count/new-count = 1/1/1. 7. If the SCSI command is a READ, we issue RESPONSE and they get dropped as well because Abort is still active. qla2xxx [0000:04:00.0]-e901:25: RESET-RSP active/old-count/new-count = 1/1/1 8. Now eventually, ISP Abort finishes clearing the DPC flags. qla2xxx [0000:04:00.0]-8822:25: qla2x00_abort_isp succeeded. qla2xxx [0000:04:00.0]-4808:25: ISP abort end. 9. Since we dropped SCSI commands silently (without any responses sent to the initiator) initiator waits for a SCSI timeout (which is 60 seconds in our case), Sends an ABTS which fails since there no se_cmd found for the tag that ABTS is referencing as the commands were cleaned up in Step 6 and 7. 10. Initiator send an IO after the ABTS which succeed fine. To fix the above case, the following changes have been made: - To prevent target from dropping commands silently, use the online flag instead to check for an active chip reset. Once the port is online during a chip reset phase, we are good to process the commands. - Clean up qla2x00_restart_isp to not set the online flag and process ATIO as it is unnecessary. During a chip reset, interrupts are enabled only after setting the online flag to 1, so ATIO's won't be missed and hence no need to process ATIO's after setting the online flag. Signed-off-by: Dilip Kumar Uppugandla <dilip@purestorage.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
-
Quinn Tran authored
set ATIO/Request/Response Queues and Default number of outstanding command to 4k. Signed-off-by: Quinn Tran <quinn.tran@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
-
Quinn Tran authored
Signed-off-by: Quinn Tran <quinn.tran@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
-
Quinn Tran authored
99% of the time the ATIOQ has SCSI command. The other 1% of time is something else. Most of the time this interrupt does not need to hold the hardware_lock. We're moving the ATIO interrupt thread to a different lock to reduce lock contention. Signed-off-by: Quinn Tran <quinn.tran@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
-
Quinn Tran authored
queue work element to specific process lessen cache miss Signed-off-by: Quinn Tran <quinn.tran@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
-
Quinn Tran authored
Register to receive notification of when irq setting change occured. Signed-off-by: Quinn Tran <quinn.tran@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
-
Quinn Tran authored
Sessions management (add, deleted, modify) currently are serialized through the hardware_lock. Hardware_lock is a high traffic lock. This lock is accessed by both the transmit & receive sides. Sessions management is now moved off to another lock call sess_lock. This is done to reduce lock contention and increase traffic throughput. Signed-off-by: Quinn Tran <quinn.tran@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
-
Quinn Tran authored
Replace QLA_TGT_STATE_ABORTED state with a bit because the current state of the command is lost when an abort is requested by upper layer. Signed-off-by: Quinn Tran <quinn.tran@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
-
Alexei Potashnik authored
Until now ack'ing of a new PLOGI has only been delayed if there was an existing session for the same WWN. Ack was released when the session deletion completed. If there was another WWN session with the same fc_id/loop_id pair (aka "conflicting session"), PLOGI was still ack'ed immediately. This potentially caused a problem when old session deletion logged fc_id/loop_id out of FW after new session has been established. Two work-arounds were attempted before: 1. Dropping PLOGIs until conflicting session goes away. 2. Detecting initiator being logged out of FW and issuing LOGO to force re-login. This patch introduces proper solution to the problem where PLOGI is held until either existing session with same WWN or any conflicting session goes away. Mechanism supports one session holding two PLOGI acks as well as one PLOGI ack being held by many sessions. Signed-off-by: Alexei Potashnik <alexei@purestorage.com> Acked-by: Quinn Tran <quinn.tran@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
-
Alexei Potashnik authored
1. Initiator A is logged in with fc_id(1)/loop_id(1) 2. Initiator A re-logs in with fc_id(2)/loop_id(2) 3. Part of old session deletion async logoout for 1/1 is queued 4. Initiator B logs in with fc_id(1)/loop_id(1), starts passing data and creates session. 5. Async logo from 3 is processed by DPC and sent to FW Now initiator B has the session but is logged out from FW. This condition is detected first with CTIO error 29 at which point we should delete current session. During session deletion we will send LOGO to initiator to force re-login. Under rare circumstances initiator might be logged out of FW, not have driver session, but still think it's logged in. E.g. the above sequence plus session deletion due to re-config. Incoming commands will fail to create local session because initiator is not found in FW. In this case we also issue LOGO to initiator to force him re-login. Finally this patch fixes exchange leak when commands where received in logged out state. In this case loop_id must be set to FFFF when corresponding exchange is terminated. The patch modifies exchange termination to always use FFFF, since in certain scenarios it's impossible to tell whether command was received in logged in or logged out state. Signed-off-by: Alexei Potashnik <alexei@purestorage.com> Acked-by: Quinn Tran <quinn.tran@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
-
Himanshu Madhani authored
This patch adds interface to send explicit LOGO explicit LOGO using using ELS commands from driver. Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
-
Quinn Tran authored
DebugFS now will show fw_resource_count node. FW Resource count Original TGT exchg count[0] current TGT exchg count[0] original Initiator Exchange count[2048] Current Initiator Exchange count[2048] Original IOCB count[2078] Current IOCB count[2067] MAX VP count[254] MAX FCF count[0] Signed-off-by: Quinn Tran <quinn.tran@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
-
Himanshu Madhani authored
Following counters are added in target mode to help debugging efforts. Target Counters qla_core_sbt_cmd = 0 qla_core_ret_sta_ctio = 0 qla_core_ret_ctio = 0 core_qla_que_buf = 0 core_qla_snd_status = 0 core_qla_free_cmd = 0 num alloc iocb failed = 0 num term exchange sent = 0 num Q full sent = 0 Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
-
Himanshu Madhani authored
This patch enables Exchange offload support in Qlogic ISP. To enable exchange offload with Qlogic ISP24XX/25XX/26XX, set module parameter ql2xexchoffld to any non-zero number. This will alow ISP firmware to store exchange data structures used by firmware to host memory provided by driver. ISP firmware can supports upto 32k total active exchanges. Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
-
Himanshu Madhani authored
This patch enables Extended Logins support in Qlogic ISP. To enable extended login with Qlogic ISP24XX/25XX/26XX, set module parameter ql2xexlogins to any non-zero number. This will alow ISP firmware to store port database structure information of remote login sessions to host memory provided by driver. ISP firmware supports upto 16k total logins. Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
-
- 06 Jan, 2016 6 commits
-
-
Geliang Tang authored
Use offset_in_page macro instead of (addr & ~PAGE_MASK). Signed-off-by: Geliang Tang <geliangtang@163.com> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
-
Christophe Vu-Brugier authored
The following message is displayed in dmesg when a deprecated attribute is set: "ignoring deprecated ##_name## attribute" This patch fixes the format to include the name of the deprecated attribute. Signed-off-by: Christophe Vu-Brugier <cvubrugier@fastmail.fm> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
-
Jamie Pocas authored
This change sets the LBPRZ flag in EVPD page b2h and READ CAPACITY (16) based on a new unmap_zeroes_data device attribute. This flag is set automatically for iblock based on underlying block device queue's discard_zeroes_data flag. Signed-off-by: Jamie Pocas <jamie.pocas@emc.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
-
Bart Van Assche authored
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Acked-by: Chris Boot <bootc@bootc.net> Reviewed-by: Andy Grover <agrover@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
-
Bart Van Assche authored
Modify indentation such that the 'smatch' tool no longer complains about incorrect indentation + unreachable code. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Reviewed-by: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
-
Bart Van Assche authored
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Reviewed-by: Andy Grover <agrover@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
-
- 21 Dec, 2015 3 commits
-
-
Andrzej Pietrasiewicz authored
Allow using the tcm function as a component of a gadget composed with ConfigFS. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
-
Andrzej Pietrasiewicz authored
Do not directly use file static strings definitions in instances of f_tcm. Instead use usb_gstrings_attach. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
-
Andrzej Pietrasiewicz authored
The only instance is guaranteed with TPG_INSTANCES defined to 1. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
-