- 08 Feb, 2017 13 commits
-
-
Hans Verkuil authored
commit 7e0d4e92 upstream. Fix these compiler warnings that appeared after switching to gcc-5.1.0: drivers/media/platform/s3c-camif/camif-capture.c: In function 'sensor_set_power': drivers/media/platform/s3c-camif/camif-capture.c:118:10: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses] if (!on == camif->sensor.power_count) ^ drivers/media/platform/s3c-camif/camif-capture.c: In function 'sensor_set_streaming': drivers/media/platform/s3c-camif/camif-capture.c:134:10: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses] if (!on == camif->sensor.stream_count) ^ Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Cc: Kamil Debski <k.debski@samsung.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@osg.samsung.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Juergen Gross authored
commit 1cf38741 upstream. xen_cleanhighmap() is operating on level2_kernel_pgt only. The upper bound of the loop setting non-kernel-image entries to zero should not exceed the size of level2_kernel_pgt. Reported-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Juergen Gross <jgross@suse.com> Signed-off-by:
David Vrabel <david.vrabel@citrix.com> Signed-off-by:
-
Tomer Barletz authored
commit 8ec7cfce upstream. This fixes the following warning, that is seen with gcc 5.1: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses]. Signed-off-by:
Tomer Barletz <barletz@gmail.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
James C Boyd authored
commit 09a5c34e upstream. GCC reports a -Wlogical-not-parentheses warning here; therefore add parentheses to shut it up and to express our intent more. Signed-off-by:
James C Boyd <jcboyd.dev@gmail.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Arnd Bergmann authored
commit 6ec0a86c upstream. gcc-5.x warns about a preexisting problem in the hpt36x pata driver: drivers/ata/pata_hpt366.c: In function 'hpt36x_init_one': drivers/ata/pata_hpt366.c:376:9: warning: assignment discards 'const' qualifier from pointer target type [-Wdiscarded-array-qualifiers] Other ata drivers have the same problem, as ata_pci_bmdma_init_one takes a non-const pointer, and they solve it by using a cast to turn that pointer into a normal non-const pointer. I also tried to change the ata core code to make host->private_data a const pointer, but that quickly got out of hand, as some other drivers expect it to be writable, so I ended up using the same hack as the others here. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Jiri Slaby authored
commit 9391976a upstream. gcc5 warns about passing a const array to hci_test_bit which takes a non-const pointer: net/bluetooth/hci_sock.c: In function ‘hci_sock_sendmsg’: net/bluetooth/hci_sock.c:955:8: warning: passing argument 2 of ‘hci_test_bit’ discards ‘const’ qualifier from pointer target type [-Wdiscarded-array-qualifiers] &hci_sec_filter.ocf_mask[ogf])) && ^ net/bluetooth/hci_sock.c:49:19: note: expected ‘void *’ but argument is of type ‘const __u32 (*)[4] {aka const unsigned int (*)[4]}’ static inline int hci_test_bit(int nr, void *addr) ^ So make 'addr' 'const void *'. Signed-off-by:
Jiri Slaby <jslaby@suse.cz> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Cc: Gustavo Padovan <gustavo@padovan.org> Cc: Johan Hedberg <johan.hedberg@gmail.com> Signed-off-by:
-
David Miller authored
commit c1f86676 upstream. More recent GCC warns about two kinds of switch statement uses: 1) Switching on an enumeration, but not having an explicit case statement for all members of the enumeration. To show the compiler this is intentional, we simply add a default case with nothing more than a break statement. 2) Switching on a boolean value. I think this warning is dumb but nevertheless you get it wholesale with -Wswitch. This patch cures all such warnings in netfilter. Signed-off-by:
David S. Miller <davem@davemloft.net> Acked-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Linus Torvalds authored
commit 124a3d88 upstream. Newer versions of gcc warn about the use of __builtin_return_address() with a non-zero argument when "-Wall" is specified: kernel/trace/trace_irqsoff.c: In function ‘stop_critical_timings’: kernel/trace/trace_irqsoff.c:433:86: warning: calling ‘__builtin_return_address’ with a nonzero argument is unsafe [-Wframe-address] stop_critical_timing(CALLER_ADDR0, CALLER_ADDR1); [ .. repeats a few times for other similar cases .. ] It is true that a non-zero argument is somewhat dangerous, and we do not actually have very many uses of that in the kernel - but the ftrace code does use it, and as Stephen Rostedt says: "We are well aware of the danger of using __builtin_return_address() of > 0. In fact that's part of the reason for having the "thunk" code in x86 (See arch/x86/entry/thunk_{64,32}.S). [..] it adds extra frames when tracking irqs off sections, to prevent __builtin_return_address() from accessing bad areas. In fact the thunk_32.S states: 'Trampoline to trace irqs off. (otherwise CALLER_ADDR1 might crash)'." For now, __builtin_return_address() with a non-zero argument is the best we can do, and the warning is not helpful and can end up making people miss other warnings for real problems. So disable the frame-address warning on compilers that need it. Acked-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
Arnd Bergmann authored
commit 8e0cc8c3 upstream. gcc points out code that is not indented the way it is interpreted: net/caif/cfpkt_skbuff.c: In function 'cfpkt_setlen': net/caif/cfpkt_skbuff.c:289:4: error: statement is indented as if it were guarded by... [-Werror=misleading-indentation] return cfpkt_getlen(pkt); ^~~~~~ net/caif/cfpkt_skbuff.c:286:3: note: ...this 'else' clause, but it is not else ^~~~ It is clear from the context that not returning here would be a bug, as we'd end up passing a negative length into a function that takes a u16 length, so it is not missing curly braces here, and I'm assuming that the indentation is the only part that's wrong about it. Signed-off-by:
-
Dan Carpenter authored
commit 946e8798 upstream. The verbose module parameter can be set to 2 for extremely verbose messages so the type should be int instead of bool. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Cc: Tim Waugh <tim@cyberelk.net> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Tillmann Heidsieck authored
commit cbb41b91 upstream. Fix a smatch warning: drivers/atm/iphase.c:1178 rx_pkt() warn: curly braces intended? The code is correct, the indention is misleading. In case the allocation of skb fails, we want to skip to the end. Signed-off-by:
Tillmann Heidsieck <theidsieck@leenox.de> Signed-off-by:
-
Andrew Morton authored
commit 0f989f74 upstream. The patch "module: fix types of device tables aliases" newly requires that invocations of MODULE_DEVICE_TABLE(type, name); come *after* the definition of `name'. That is reasonable, but some drivers weren't doing this. Fix them. Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Andrey Ryabinin <a.ryabinin@samsung.com> Cc: David Miller <davem@davemloft.net> Cc: Hans Verkuil <hverkuil@xs4all.nl> Acked-by:
-
Andrey Ryabinin authored
commit 6301939d upstream. MODULE_DEVICE_TABLE() macro used to create aliases to device tables. Normally alias should have the same type as aliased symbol. Device tables are arrays, so they have 'struct type##_device_id[x]' types. Alias created by MODULE_DEVICE_TABLE() will have non-array type - 'struct type##_device_id'. This inconsistency confuses compiler, it could make a wrong assumption about variable's size which leads KASan to produce a false positive report about out of bounds access. For every global variable compiler calls __asan_register_globals() passing information about global variable (address, size, size with redzone, name ...) __asan_register_globals() poison symbols redzone to detect possible out of bounds accesses. When symbol has an alias __asan_register_globals() will be called as for symbol so for alias. Compiler determines size of variable by size of variable's type. Alias and symbol have the same address, so if alias have the wrong size part of memory that actually belongs to the symbol could be poisoned as redzone of alias symbol. By fixing type of alias symbol we will fix size of it, so __asan_register_globals() will not poison valid memory. Signed-off-by:
Andrey Ryabinin <a.ryabinin@samsung.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Konstantin Serebryany <kcc@google.com> Cc: Dmitry Chernenkov <dmitryc@google.com> Signed-off-by:
Andrey Konovalov <adech.fo@gmail.com> Cc: Yuri Gribov <tetra2005@gmail.com> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Christoph Lameter <cl@linux.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Signed-off-by:
-
- 18 Jan, 2017 1 commit
-
-
Sasha Levin authored
Signed-off-by:Sasha Levin <alexander.levin@verizon.com>
-
- 15 Jan, 2017 26 commits
-
-
Alexander Duyck authored
[ Upstream commit c3483384 ] This patch should fix the issues seen with a recent fix to prevent tunnel-in-tunnel frames from being generated with GRO. The fix itself is correct for now as long as we do not add any devices that support NETIF_F_GSO_GRE_CSUM. When such a device is added it could have the potential to mess things up due to the fact that the outer transport header points to the outer UDP header and not the GRE header as would be expected. Fixes: fac8e0f5 ("tunnels: Don't apply GRO to multiple layers of encapsulation.") Signed-off-by:
Alexander Duyck <aduyck@mirantis.com> Signed-off-by:
-
Jesse Gross authored
[ Upstream commit fac8e0f5 ] When drivers express support for TSO of encapsulated packets, they only mean that they can do it for one layer of encapsulation. Supporting additional levels would mean updating, at a minimum, more IP length fields and they are unaware of this. No encapsulation device expresses support for handling offloaded encapsulated packets, so we won't generate these types of frames in the transmit path. However, GRO doesn't have a check for multiple levels of encapsulation and will attempt to build them. UDP tunnel GRO actually does prevent this situation but it only handles multiple UDP tunnels stacked on top of each other. This generalizes that solution to prevent any kind of tunnel stacking that would cause problems. Fixes: bf5a755f ("net-gre-gro: Add GRE support to the GRO stack") Signed-off-by:
Jesse Gross <jesse@kernel.org> Signed-off-by:
-
Tom Herbert authored
[ Upstream commit baa32ff4 ] This patch moves the free and same_flow fields to be bit fields (2 and 1 bit sized respectively). This frees up some space for u16's. Signed-off-by:
Tom Herbert <therbert@google.com> Signed-off-by:
-
Deepa Dinamani authored
[ Upstream commit 822c8685 ] ICMP timestamp messages and IP source route options require timestamps to be in milliseconds modulo 24 hours from midnight UT format. Add inet_current_timestamp() function to support this. The function returns the required timestamp in network byte order. Timestamp calculation is also changed to call ktime_get_real_ts64() which uses struct timespec64. struct timespec64 is y2038 safe. Previously it called getnstimeofday() which uses struct timespec. struct timespec is not y2038 safe. Signed-off-by:
Deepa Dinamani <deepa.kernel@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: James Morris <jmorris@namei.org> Cc: Patrick McHardy <kaber@trash.net> Acked-by:
YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Acked-by:
-
Jesse Gross authored
[ Upstream commit b8cba75b ] ipip encapsulated packets can be merged together by GRO but the result does not have the proper GSO type set or even marked as being encapsulated at all. Later retransmission of these packets will likely fail if the device does not support ipip offloads. This is similar to the issue resolved in IPv6 sit in feec0cb3 ("ipv6: gro: support sit protocol"). Reported-by:
Patrick Boutilier <boutilpj@ednet.ns.ca> Fixes: 9667e9bb ("ipip: Add gro callbacks to ipip offload") Tested-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Al Viro authored
[ Upstream commit 128394ef ] Both damn things interpret userland pointers embedded into the payload; worse, they are actually traversing those. Leaving aside the bad API design, this is very much _not_ safe to call with KERNEL_DS. Bail out early if that happens. Cc: stable@vger.kernel.org Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Aleksa Sarai authored
[ Upstream commit 613cc2b6 ] If you have a process that has set itself to be non-dumpable, and it then undergoes exec(2), any CLOEXEC file descriptors it has open are "exposed" during a race window between the dumpable flags of the process being reset for exec(2) and CLOEXEC being applied to the file descriptors. This can be exploited by a process by attempting to access /proc/<pid>/fd/... during this window, without requiring CAP_SYS_PTRACE. The race in question is after set_dumpable has been (for get_link, though the trace is basically the same for readlink): [vfs] -> proc_pid_link_inode_operations.get_link -> proc_pid_get_link -> proc_fd_access_allowed -> ptrace_may_access(task, PTRACE_MODE_READ_FSCREDS); Which will return 0, during the race window and CLOEXEC file descriptors will still be open during this window because do_close_on_exec has not been called yet. As a result, the ordering of these calls should be reversed to avoid this race window. This is of particular concern to container runtimes, where joining a PID namespace with file descriptors referring to the host filesystem can result in security issues (since PRCTL_SET_DUMPABLE doesn't protect against access of CLOEXEC file descriptors -- file descriptors which may reference filesystem objects the container shouldn't have access to). Cc: dev@opencontainers.org Cc: <stable@vger.kernel.org> # v3.2+ Reported-by:
Michael Crosby <crosbymichael@gmail.com> Signed-off-by:
Aleksa Sarai <asarai@suse.de> Signed-off-by:
-
Bart Van Assche authored
[ Upstream commit fba332b0 ] Code that dereferences the struct net_device ip_ptr member must be protected with an in_dev_get() / in_dev_put() pair. Hence insert calls to these functions. Fixes: commit 7b85627b ("IB/cma: IBoE (RoCE) IP-based GID addressing") Signed-off-by:
Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by:
Moni Shoua <monis@mellanox.com> Cc: Or Gerlitz <ogerlitz@mellanox.com> Cc: Roland Dreier <roland@purestorage.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
-
Takashi Iwai authored
[ Upstream commit f8114f85 ] This reverts commit 16200948. The commit was intended to cover the race condition, but it introduced yet another regression for devices with the implicit feedback, leading to a kernel panic due to NULL-dereference in an irq context. As the race condition that was addressed by the commit is very rare and the regression is much worse, let's revert the commit for rc1, and fix the issue properly in a later patch. Fixes: 16200948 ("ALSA: usb-audio: Fix race at stopping the stream") Reported-by:
Ioan-Adrian Ratiu <adi@adirat.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Russell Currey authored
[ Upstream commit 298360af ] ast_get_dram_info() configures a window in order to access BMC memory. A BMC register can be configured to disallow this, and if so, causes an infinite loop in the ast driver which renders the system unusable. Fix this by erroring out if an error is detected. On powerpc systems with EEH, this leads to the device being fenced and the system continuing to operate. Cc: <stable@vger.kernel.org> # 3.10+ Signed-off-by:
Russell Currey <ruscur@russell.cc> Reviewed-by:
Joel Stanley <joel@jms.id.au> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161215051241.20815-1-ruscur@russell.ccSigned-off-by:
-
Andy Grover authored
[ Upstream commit d0905ca7 ] Don't free the cmd in tcmu_check_expired_cmd, it's still referenced by an entry in our cmd_id->cmd idr. If userspace ever resumes processing, tcmu_handle_completions() will use the now-invalid cmd pointer. Instead, don't free cmd. It will be freed by tcmu_handle_completion() if userspace ever recovers, or tcmu_free_device if not. Cc: stable@vger.kernel.org Reported-by:
Bryant G Ly <bgly@us.ibm.com> Tested-by:
Andy Grover <agrover@redhat.com> Signed-off-by:
-
Wei Fang authored
[ Upstream commit d2a14525 ] A race between scanning and fc_remote_port_delete() may result in a permanent stop if the device gets blocked before scsi_sysfs_add_sdev() and unblocked after. The reason is that blocking a device sets both the SDEV_BLOCKED state and the QUEUE_FLAG_STOPPED. However, scsi_sysfs_add_sdev() unconditionally sets SDEV_RUNNING which causes the device to be ignored by scsi_target_unblock() and thus never have its QUEUE_FLAG_STOPPED cleared leading to a device which is apparently running but has a stopped queue. We actually have two places where SDEV_RUNNING is set: once in scsi_add_lun() which respects the blocked flag and once in scsi_sysfs_add_sdev() which doesn't. Since the second set is entirely spurious, simply remove it to fix the problem. Cc: <stable@vger.kernel.org> Reported-by:
Zengxi Chen <chenzengxi@huawei.com> Signed-off-by:
Wei Fang <fangwei1@huawei.com> Reviewed-by:
Ewan D. Milne <emilne@redhat.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Bart Van Assche authored
[ Upstream commit 11b642b8 ] This patch avoids that Coverity reports the following: Using uninitialized value port_attr.state when calling printk Fixes: commit 94232d9c ("IPoIB: Start multicast join process only on active ports") Signed-off-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
-
NeilBrown authored
[ Upstream commit bcc7f5b4 ] bdev->bd_contains is not stable before calling __blkdev_get(). When __blkdev_get() is called on a parition with ->bd_openers == 0 it sets bdev->bd_contains = bdev; which is not correct for a partition. After a call to __blkdev_get() succeeds, ->bd_openers will be > 0 and then ->bd_contains is stable. When FMODE_EXCL is used, blkdev_get() calls bd_start_claiming() -> bd_prepare_to_claim() -> bd_may_claim() This call happens before __blkdev_get() is called, so ->bd_contains is not stable. So bd_may_claim() cannot safely use ->bd_contains. It currently tries to use it, and this can lead to a BUG_ON(). This happens when a whole device is already open with a bd_holder (in use by dm in my particular example) and two threads race to open a partition of that device for the first time, one opening with O_EXCL and one without. The thread that doesn't use O_EXCL gets through blkdev_get() to __blkdev_get(), gains the ->bd_mutex, and sets bdev->bd_contains = bdev; Immediately thereafter the other thread, using FMODE_EXCL, calls bd_start_claiming() from blkdev_get(). This should fail because the whole device has a holder, but because bdev->bd_contains == bdev bd_may_claim() incorrectly reports success. This thread continues and blocks on bd_mutex. The first thread then sets bdev->bd_contains correctly and drops the mutex. The thread using FMODE_EXCL then continues and when it calls bd_may_claim() again in: BUG_ON(!bd_may_claim(bdev, whole, holder)); The BUG_ON fires. Fix this by removing the dependency on ->bd_contains in bd_may_claim(). As bd_may_claim() has direct access to the whole device, it can simply test if the target bdev is the whole device. Fixes: 6b4517a7 ("block: implement bd_claiming and claiming block") Cc: stable@vger.kernel.org (v2.6.35+) Signed-off-by:
NeilBrown <neilb@suse.com> Signed-off-by:
Jens Axboe <axboe@fb.com> Signed-off-by:
-
Jingkui Wang authored
[ Upstream commit 5a8a6b89 ] We were assigning I2C bus controller instead of client as parent device. Besides being logically wrong, it messed up with devm handling of input device. As a result we were leaving input device and event node behind after rmmod-ing the driver, which lead to a kernel oops if one were to access the event node later. Let's remove the assignment and rely on devm_input_allocate_device() to set it up properly for us. Signed-off-by:
Jingkui Wang <jkwang@google.com> Fixes: 7132fe4f ("Input: drv260x - add TI drv260x haptics driver") Cc: stable@vger.kernel.org Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Ilya Dryomov authored
[ Upstream commit 5c056fdc ] After sending an authorizer (ceph_x_authorize_a + ceph_x_authorize_b), the client gets back a ceph_x_authorize_reply, which it is supposed to verify to ensure the authenticity and protect against replay attacks. The code for doing this is there (ceph_x_verify_authorizer_reply(), ceph_auth_verify_authorizer_reply() + plumbing), but it is never invoked by the the messenger. AFAICT this goes back to 2009, when ceph authentication protocols support was added to the kernel client in 4e7a5dcd ("ceph: negotiate authentication protocol; implement AUTH_NONE protocol"). The second param of ceph_connection_operations::verify_authorizer_reply is unused all the way down. Pass 0 to facilitate backporting, and kill it in the next commit. Cc: stable@vger.kernel.org Signed-off-by:
Ilya Dryomov <idryomov@gmail.com> Reviewed-by:
Sage Weil <sage@redhat.com> Signed-off-by:
-
Jussi Laako authored
[ Upstream commit 995c6a7f ] Sampling rate changes after first set one are not reflected to the hardware, while driver and ALSA think the rate has been changed. Fix the problem by properly stopping the interface at the beginning of prepare call, allowing new rate to be set to the hardware. This keeps the hardware in sync with the driver. Signed-off-by:
Jussi Laako <jussi@sonarnerd.net> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Gerald Schaefer authored
[ Upstream commit 5457e03d ] The buffer for iucv_message_receive() needs to be below 2 GB. In __iucv_message_receive(), the buffer address is casted to an u32, which would result in either memory corruption or an addressing exception when using addresses >= 2 GB. Fix this by using GFP_DMA for the buffer allocation. Cc: stable@vger.kernel.org Signed-off-by:
Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Ben Hutchings authored
[ Upstream commit 79e51b5c ] Currently it is impossible to edit the value of a config symbol with a prompt longer than (terminal width - 2) characters. dialog_inputbox() calculates a negative x-offset for the input window and newwin() fails as this is invalid. It also doesn't check for this failure, so it busy-loops calling wgetch(NULL) which immediately returns -1. The additions in the offset calculations also don't match the intended size of the window. Limit the window size and calculate the offset similarly to show_scroll_win(). Cc: stable <stable@vger.kernel.org> Fixes: 692d97c3 ("kconfig: new configuration interface (nconfig)") Signed-off-by:
Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by:
-
NeilBrown authored
[ Upstream commit 1cded9d2 ] There are two problems with refcounting of auth_gss messages. First, the reference on the pipe->pipe list (taken by a call to rpc_queue_upcall()) is not counted. It seems to be assumed that a message in pipe->pipe will always also be in pipe->in_downcall, where it is correctly reference counted. However there is no guaranty of this. I have a report of a NULL dereferences in rpc_pipe_read() which suggests a msg that has been freed is still on the pipe->pipe list. One way I imagine this might happen is: - message is queued for uid=U and auth->service=S1 - rpc.gssd reads this message and starts processing. This removes the message from pipe->pipe - message is queued for uid=U and auth->service=S2 - rpc.gssd replies to the first message. gss_pipe_downcall() calls __gss_find_upcall(pipe, U, NULL) and it finds the *second* message, as new messages are placed at the head of ->in_downcall, and the service type is not checked. - This second message is removed from ->in_downcall and freed by gss_release_msg() (even though it is still on pipe->pipe) - rpc.gssd tries to read another message, and dereferences a pointer to this message that has just been freed. I fix this by incrementing the reference count before calling rpc_queue_upcall(), and decrementing it if that fails, or normally in gss_pipe_destroy_msg(). It seems strange that the reply doesn't target the message more precisely, but I don't know all the details. In any case, I think the reference counting irregularity became a measureable bug when the extra arg was added to __gss_find_upcall(), hence the Fixes: line below. The second problem is that if rpc_queue_upcall() fails, the new message is not freed. gss_alloc_msg() set the ->count to 1, gss_add_msg() increments this to 2, gss_unhash_msg() decrements to 1, then the pointer is discarded so the memory never gets freed. Fixes: 9130b8db ("SUNRPC: allow for upcalls for same uid but different gss service") Cc: stable@vger.kernel.org Link: https://bugzilla.opensuse.org/show_bug.cgi?id=1011250Signed-off-by:
Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit 578620f4 ] We should set the error code if kzalloc() fails. Fixes: 67cf5b09 ("ext4: add the basic function for inline data support") Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org Signed-off-by:
-
Al Viro authored
[ Upstream commit c0cf3ef5 ] What matters when deciding if we should make a page uptodate is not how much we _wanted_ to copy, but how much we actually have copied. As it is, on architectures that do not zero tail on short copy we can leave uninitialized data in page marked uptodate. Cc: stable@vger.kernel.org Signed-off-by:
-
Steven Rostedt (Red Hat) authored
[ Upstream commit 794de08a ] Both the wakeup and irqsoff tracers can use the function graph tracer when the display-graph option is set. The problem is that they ignore the notrace file, and record the entry of functions that would be ignored by the function_graph tracer. This causes the trace->depth to be recorded into the ring buffer. The set_graph_notrace uses a trick by adding a large negative number to the trace->depth when a graph function is to be ignored. On trace output, the graph function uses the depth to record a stack of functions. But since the depth is negative, it accesses the array with a negative number and causes an out of bounds access that can cause a kernel oops or corrupt data. Have the print functions handle cases where a tracer still records functions even when they are in set_graph_notrace. Also add warnings if the depth is below zero before accessing the array. Note, the function graph logic will still prevent the return of these functions from being recorded, which means that they will be left hanging without a return. For example: # echo '*spin*' > set_graph_notrace # echo 1 > options/display-graph # echo wakeup > current_tracer # cat trace [...] _raw_spin_lock() { preempt_count_add() { do_raw_spin_lock() { update_rq_clock(); Where it should look like: _raw_spin_lock() { preempt_count_add(); do_raw_spin_lock(); } update_rq_clock(); Cc: stable@vger.kernel.org Cc: Namhyung Kim <namhyung.kim@lge.com> Fixes: 29ad23b0 ("ftrace: Add set_graph_notrace filter") Signed-off-by:
-
Giuseppe Lippolis authored
[ Upstream commit d8a12b71 ] Adding registration for 3G modem DWM-158 in usb-serial-option Signed-off-by:
Giuseppe Lippolis <giu.lippolis@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Daniele Palmas authored
[ Upstream commit 5b09eff0 ] This patch adds support for PIDs 0x1040, 0x1041 of Telit LE922A. Since the interface positions are the same than the ones used for other Telit compositions, previous defined blacklists are used. Signed-off-by:
Daniele Palmas <dnlplm@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Con Kolivas authored
[ Upstream commit 82ffb6fc ] The Logitech QuickCam Communicate Deluxe/S7500 microphone fails with the following warning. [ 6.778995] usb 2-1.2.2.2: Warning! Unlikely big volume range (=3072), cval->res is probably wrong. [ 6.778996] usb 2-1.2.2.2: [5] FU [Mic Capture Volume] ch = 1, val = 4608/7680/1 Adding it to the list of devices in volume_control_quirks makes it work properly, fixing related typo. Signed-off-by:
Con Kolivas <kernel@kolivas.org> Cc: <stable@vger.kernel.org> Signed-off-by:
-
