- 09 Sep, 2008 39 commits
-
-
Harald Welte authored
In the current driver, there is a consistent mistake between the SURROUND and the SIDE channels. This patch fixes it. Signed-off-by:
Harald Welte <HaraldWelte@viatech.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Jaroslav Kysela <perex@perex.cz>
-
Harald Welte authored
Signed-off-by:
-
Harald Welte authored
* add extra parenthesis to make code more readable * use kzalloc() for alloc+zero rather than kcalloc() * ensure that AUTO_SEQ_* starts at 0 Signed-off-by:
-
Uwe Kleine-König authored
Don't use __init but __devinit to define probe function. A pointer to sa11xx_uda1341_probe is passed to the core via platform_driver_register and so the function must not disappear after the module is loaded. Using __init and having HOTPLUG=y and SND_SA11XX_UDA1341=m the following probably oopses: echo -n sa11xx_uda1341.1 > /sys/bus/platform/driver/sa11xx_uda1341/unbind echo -n sa11xx_uda1341.1 > /sys/bus/platform/driver/sa11xx_uda1341/bind Signed-off-by:
Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Brian Avery <b.avery@hp.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Matthew Ranostay authored
Signed-off-by:
Matthew Ranostay <mranostay@embeddedalley.com> Signed-off-by:
-
Matthew Ranostay authored
Changed the mux naming scheme from "IEC9258 Mux" to "IEC958 Playback Source" to match the coding style. Signed-by-off: Matthew Ranostay <mranostay@embeddedalley.com> Signed-off-by:
-
Matthew Ranostay authored
Added slave_dig_outs entries for several IDT codecs that have multiple SPDIF outs, and enabled these SPDIF outs in several pin configs. Signed-off-by:
-
Mark Brown authored
Muting the DAC masks artefacts introduced as the digital stream shuts down, for example when the input stops being clocked. Signed-off-by:
Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by:
-
Mark Brown authored
Hopefully this will make merges a little bit easier. Signed-off-by:
-
Mark Brown authored
Signed-off-by:
-
Matthew Ranostay authored
Added support for playing a stream on multiple digital outs. This is done by defining codec->slave_dig_outs as array of hda_nid_t with a null-terminated entry to set the slave SPDIF outs, in which the slave outs have cloned settings of the master out (e.g. dig_out_nid). Signed-off-by:
-
Krzysztof Helt authored
The __exit cleanup_oss_soundcore() is called from the __init init_soundcore(). This causes section mismatch and breaks kernel's linking on sparc64. Remove the __exit attribute from the cleanup_oss_soundcore(). Signed-off-by:
Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by:
-
Takashi Iwai authored
The lock used in snd_ctl_dev_disconnect() should be card->ctl_files_rwlock for protection of card->ctl_files entries, instead of card->controls_rwsem. Reported-by:
Vegard Nossum <vegard.nossum@gmail.com> Signed-off-by:
-
Alexander Beregalov authored
before: total: 113 errors, 169 warnings, 2786 lines checked total: 26 errors, 24 warnings, 504 lines checked after: total: 14 errors, 163 warnings, 2799 lines checked total: 0 errors, 24 warnings, 504 lines checked Compile tested only. Signed-off-by:
Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by:
-
Alexander Beregalov authored
before: total: 96 errors, 66 warnings, 2612 lines checked after: total: 11 errors, 64 warnings, 2624 lines checked Compile tested only. Signed-off-by:
-
Vedran Miletic authored
Inspired by Alexander Beregalov's patches for wtm and aureon.c, I decided to run checkpatch on some more files. After some work checkpatch.pl-0.23 --no-tree --file --strict <file> reports 0 errors, 0 warnings, 0 checks, n lines checked for: phase.c phase.h juli.c (1 check about unused code, maybe we should comment it) juli.h (no changes necessary) In other files I have just fixed // comments and long lines along the way (but not all of them), more coming up. Signed-off-by:
Vedran Miletic <rivanvx@gmail.com> Signed-off-by:
-
Matthew Ranostay authored
Removed unneeded hp_nid references for 92hd73xx codec family. Signed-off-by:
-
Matthew Ranostay authored
Dynamically create mux controls for SPDIF outs on certain IDT/Sigmatel codecs. Signed-off-by:
-
Alexander Beregalov authored
before: total: 2 errors, 0 warnings, 20 lines checked total: 49 errors, 2 warnings, 518 lines checked after: total: 0 errors, 0 warnings, 20 lines checked total: 0 errors, 0 warnings, 518 lines checked Compile tested, size and code are equal. Signed-off-by:
-
Alexander Beregalov authored
before: total: 304 errors, 137 warnings, 2259 lines checked after: total: 0 errors, 121 warnings, 2284 lines checked Compile tested, size is different because of include was changed, but without that change md5sum is different because of cmp cx,dx/cmp dx,cx swap and __LINE__ was changed in printk function. Signed-off-by:
-
Cliff Cai authored
Signed-off-by:
Cliff Cai <cliff.cai@analog.com> Signed-off-by:
Bryan Wu <cooloney@kernel.org> Signed-off-by:
-
Cliff Cai authored
Signed-off-by:
-
Cliff Cai authored
Signed-off-by:
-
Cliff Cai authored
Signed-off-by:
-
Cliff Cai authored
[Additional coding standards fixes by Mark Brown.] Signed-off-by:
-
Cliff Cai authored
Signed-off-by:
-
Cliff Cai authored
Signed-off-by:
-
Cliff Cai authored
[Additional coding standards fixes by Mark Brown.] Signed-off-by:
-
Cliff Cai authored
SPORT is a serial port which can support serveral serial communication protocols. It can be used as I2C/PCM/AC97. For further information, please look up the HRM. [Additional coding standards fixes by Mark Brown.] Signed-off-by:
-
Cliff Cai authored
[Some checkpatch fixups done by Mark Brown.] Signed-off-by:
-
Jean Delvare authored
Convert the wm8510 codec driver to the new (standard) device driver binding model. Signed-off-by:
Jean Delvare <khali@linux-fr.org> Cc: Geoffrey Wossum <gwossum@acm.org> Signed-off-by:
-
Jean Delvare authored
Convert the lm4857 driver in neo1973_wm8753 to the new (standard) i2c device driver binding model. I assumed that the LM4857 was always on the same I2C bus as the WM8753 codec. Signed-off-by:
-
Jean Delvare authored
Convert the wm8753 codec driver to the new (standard) i2c device driver binding model. Signed-off-by:
-
Jean Delvare authored
The error handling in neo1973_init is incorrect: * If platform_device_add fails, we go on with the rest of the initialization instead of bailing out. Things will break when the module is removed (platform_device_unregister called on a device that wasn't registered.) * If i2c_add_driver fails, we return an error so the module will not load, but we don't unregister neo1973_snd_device, so we are leaking resources. Add the missing error handling. Signed-off-by:
-
Robert P. J. Day authored
Remove the Kconfig definitions of unused variables AEDSP16_MSS and AEDSP16_SBPRO since they're: 1) unused, and 2) referenced incorrectly anyway. Signed-off-by:
Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by:
-
Randy Dunlap authored
CONFIG_SND_USB_US122L uses snd_hwdep_new(), so SND_HWDEP needs to be enabled (selected). ERROR: "snd_hwdep_new" [sound/usb/usx2y/snd-usb-us122l.ko] undefined! Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
-
Cliff Cai authored
Signed-off-by:
-
Takashi Iwai authored
Empty files remained likely due to wrong patching. Remove them now. Signed-off-by:
-
Takashi Iwai authored
Allow probing of 4 codecs on known good situations. On some known bad situations, it should be avoided. Signed-off-by:
-
- 04 Sep, 2008 1 commit
-
-
Cliff Cai authored
Cc: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by:
-
