- 01 Nov, 2017 6 commits
-
-
Mauro Carvalho Chehab authored
As reported by smatch: drivers/staging/media/atomisp/pci/atomisp2/css2400/runtime/pipeline/src/pipeline.c:607 pipeline_stage_create() warn: inconsistent indenting drivers/staging/media/atomisp/i2c/atomisp-ov2680.c:255 ov2680_write_reg_array() warn: inconsistent indenting drivers/staging/media/atomisp/i2c/atomisp-ov2680.c:401 __ov2680_set_exposure() warn: inconsistent indenting drivers/staging/media/atomisp/pci/atomisp2/css2400/sh_css_params.c:4269 sh_css_params_write_to_ddr_internal() warn: inconsistent indenting drivers/staging/media/atomisp/pci/atomisp2/atomisp_v4l2.c:1008 atomisp_register_entities() warn: inconsistent indenting drivers/staging/media/atomisp/pci/atomisp2/css2400/runtime/binary/src/binary.c:1709 ia_css_binary_find() warn: inconsistent indenting Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com> Acked-by:
Sakari Ailus <sakari.ailus@iki.fi>
-
Mauro Carvalho Chehab authored
Fix a switch at input_system.c that were causing smatch warnings: drivers/staging/media/atomisp/pci/atomisp2/css2400/hive_isp_css_common/host/input_system.c:610 rx_channel_get_state() warn: inconsistent indenting drivers/staging/media/atomisp/pci/atomisp2/css2400/hive_isp_css_common/host/input_system.c:616 rx_channel_get_state() warn: inconsistent indenting drivers/staging/media/atomisp/pci/atomisp2/css2400/hive_isp_css_common/host/input_system.c:622 rx_channel_get_state() warn: inconsistent indenting drivers/staging/media/atomisp/pci/atomisp2/css2400/hive_isp_css_common/host/input_system.c:610 rx_channel_get_state() warn: inconsistent indenting drivers/staging/media/atomisp/pci/atomisp2/css2400/hive_isp_css_common/host/input_system.c:616 rx_channel_get_state() warn: inconsistent indenting drivers/staging/media/atomisp/pci/atomisp2/css2400/hive_isp_css_common/host/input_system.c:622 rx_channel_get_state() warn: inconsistent indenting Signed-off-by:
-
Mauro Carvalho Chehab authored
drivers/staging/media/atomisp/pci/atomisp2/css2400/sh_css.c:5801:1: error: directive in argument list drivers/staging/media/atomisp/pci/atomisp2/css2400/sh_css.c:5803:1: error: directive in argument list drivers/staging/media/atomisp/pci/atomisp2/css2400/sh_css.c:3795 create_host_acc_pipeline() warn: inconsistent indenting drivers/staging/media/atomisp/pci/atomisp2/css2400/sh_css.c:4343 ia_css_pipe_enqueue_buffer() warn: inconsistent indenting drivers/staging/media/atomisp/pci/atomisp2/css2400/sh_css.c:6029 sh_css_pipe_configure_viewfinder() warn: inconsistent indenting drivers/staging/media/atomisp/pci/atomisp2/css2400/sh_css.c:8693 ia_css_stream_capture() warn: inconsistent indenting drivers/staging/media/atomisp/pci/atomisp2/css2400/sh_css.c:9781 ia_css_stream_create() warn: if statement not indented drivers/staging/media/atomisp/pci/atomisp2/css2400/sh_css.c:9988 ia_css_stream_load() warn: inconsistent indenting drivers/staging/media/atomisp/pci/atomisp2/css2400/sh_css.c:10525 ia_css_update_continuous_frames() warn: inconsistent indenting Signed-off-by:
-
Mauro Carvalho Chehab authored
On lots of places, assert/return are starting at the first column, causing indentation issues, as complained by spatch: drivers/staging/media/atomisp/pci/atomisp2/css2400/hive_isp_css_common/host/irq_private.h:32 irq_reg_store() warn: inconsistent indenting Used this small script to fix such occurrences: for i in $(git grep -l -E "^(assert|return)" drivers/staging/media/); do perl -ne 's/^(assert|return)\b/\t$1/; print $_' <$i >a && mv a $i; done Signed-off-by:
-
Mauro Carvalho Chehab authored
That allows having a kernel-doc markup for the function prototype. It also prevents the need of describing the return values twice. Signed-off-by:
-
Mauro Carvalho Chehab authored
There is a get/put operation in order to get firmware is_available data there at the __v4l2_async_notifier_parse_fwnode_endpoints() function. However, instead of using it, the code just reads again without the lock. That's a bug, as dev_fwnode isn't guaranteed to be there once fwnode_handle_put() has been called on it. This solves this smatch warning: drivers/media/v4l2-core/v4l2-fwnode.c:453:8: warning: variable 'is_available' set but not used [-Wunused-but-set-variable] bool is_available; ^~~~~~~~~~~~ Fixes: 9ca46531 ("media: v4l: fwnode: Support generic parsing of graph endpoints in a device") Acked-by:Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
-
- 31 Oct, 2017 34 commits
-
-
Sakari Ailus authored
Add flash and indicator LED phandles to the sensor node. Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Acked-by:
Pavel Machek <pavel@ucw.cz> Reviewed-by:
Sebastian Reichel <sebastian.reichel@collabora.co.uk> Signed-off-by:
-
Sakari Ailus authored
Parse async sub-devices related to the sensor by switching the async sub-device registration function. Signed-off-by:
-
Sakari Ailus authored
Parse async sub-devices related to the sensor by switching the async sub-device registration function. Signed-off-by:
-
Sakari Ailus authored
Parse async sub-devices related to the sensor by switching the async sub-device registration function. Signed-off-by:
-
Sakari Ailus authored
Parse async sub-devices related to the sensor by switching the async sub-device registration function. These types devices aren't directly related to the sensor, but are nevertheless handled by the smiapp driver due to the relationship of these component to the main part of the camera module --- the sensor. This does not yet address providing the user space with information on how to associate the sensor or lens devices but the kernel now has the necessary information to do that. Signed-off-by:
-
Sakari Ailus authored
Document optional lens-focus and flash-leds properties for the smiapp driver. Signed-off-by:
Rob Herring <robh@kernel.org> Reviewed-by:
-
Sakari Ailus authored
Add a convenience function for parsing firmware for information on related devices using v4l2_async_notifier_parse_fwnode_sensor_common() registering the notifier and finally the async sub-device itself. This should be useful for sensor drivers that do not have device specific requirements related to firmware information parsing or the async framework. Signed-off-by:
Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by:
-
Sakari Ailus authored
Add v4l2_fwnode_parse_reference_sensor_common for parsing common sensor properties that refer to adjacent devices such as flash or lens driver chips. As this is an association only, there's little a regular driver needs to know about these devices as such. Signed-off-by:
-
Sakari Ailus authored
v4l2_fwnode_reference_parse_int_prop() will find an fwnode such that under the device's own fwnode, it will follow child fwnodes with the given property-value pair and return the resulting fwnode. Signed-off-by:
-
Sakari Ailus authored
Add function v4l2_fwnode_reference_parse() for parsing them as async sub-devices. This can be done on e.g. flash or lens async sub-devices that are not part of but are associated with a sensor. Signed-off-by:
-
Sakari Ailus authored
In V4L2 the practice is to have the KernelDoc documentation in the header and not in .c source code files. This consequently makes the V4L2 fwnode function documentation part of the Media documentation build. Also correct the link related function and argument naming in documentation and add an asterisk to v4l2_fwnode_endpoint_free() documentation to make it proper KernelDoc documentation. Signed-off-by:
-
Sakari Ailus authored
The lens-focus property contains a phandle to the lens voice coil driver that is associated to the sensor; typically both are contained in the same camera module. Signed-off-by:
-
Sakari Ailus authored
Camera flash drivers (and LEDs) are separate from the sensor devices in DT. In order to make an association between the two, provide the association information to the software. Signed-off-by:
-
Sakari Ailus authored
While registering a notifier, check that each newly added fwnode is unique, and return an error if it is not. Also check that a newly added notifier does not have the same fwnodes twice. Signed-off-by:
-
Sakari Ailus authored
Registering a notifier has required the knowledge of struct v4l2_device for the reason that sub-devices generally are registered to the v4l2_device (as well as the media device, also available through v4l2_device). This information is not available for sub-device drivers at probe time. What this patch does is that it allows registering notifiers without having v4l2_device around. Instead the sub-device pointer is stored in the notifier. Once the sub-device of the driver that registered the notifier is registered, the notifier will gain the knowledge of the v4l2_device, and the binding of async sub-devices from the sub-device driver's notifier may proceed. The complete callback of the root notifier will be called only when the v4l2_device is available and no notifier has pending sub-devices to bind. No complete callbacks are supported for sub-device notifiers. Signed-off-by:
-
Sakari Ailus authored
Refactor the V4L2 async framework a little in preparation for async sub-device notifiers. This avoids making some structural changes in the patch actually implementing sub-device notifiers, making that patch easier to review. Signed-off-by:
-
Sakari Ailus authored
The information on how many async sub-devices would be bindable to a notifier is typically dependent on information from platform firmware and it's not driver's business to be aware of that. Many V4L2 main drivers are perfectly usable (and useful) without async sub-devices and so if there aren't any around, just proceed call the notifier's complete callback immediately without registering the notifier itself. If a driver needs to check whether there are async sub-devices available, it can be done by inspecting the notifier's num_subdevs field which tells the number of async sub-devices. Signed-off-by:
-
Sakari Ailus authored
Register the sub-device before calling the notifier's bound callback. Doing this the other way around is problematic as the struct v4l2_device has not assigned for the sub-device yet and may be required by the bound callback. Signed-off-by:
-
Sakari Ailus authored
Add three helper functions to call async operations callbacks. Besides simplifying callbacks, this allows async notifiers to have no ops set, i.e. it can be left NULL. Signed-off-by:
-
Laurent Pinchart authored
The async subdev notifier .bound(), .unbind() and .complete() operations are function pointers stored directly in the v4l2_async_subdev structure. As the structure isn't immutable, this creates a potential security risk as the function pointers are mutable. To fix this, move the function pointers to a new v4l2_async_subdev_operations structure that can be made const in drivers. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by:
-
Sakari Ailus authored
If no source pads are found in an entity, print the name of the entity. Signed-off-by:
-
Sakari Ailus authored
We only want to link sub-devices that were bound to the async notifier the isp driver registered but there may be other sub-devices in the v4l2_device as well. Check for the correct async notifier. Signed-off-by:
-
Sakari Ailus authored
Instead of using a custom driver implementation, use v4l2_async_notifier_parse_fwnode_endpoints() to parse the fwnode endpoints of the device. Signed-off-by:
-
Sakari Ailus authored
Instead of using a custom driver implementation, use v4l2_async_notifier_parse_fwnode_endpoints() to parse the fwnode endpoints of the device. Signed-off-by:
-
Sakari Ailus authored
Add two functions for parsing devices graph endpoints: v4l2_async_notifier_parse_fwnode_endpoints and v4l2_async_notifier_parse_fwnode_endpoints_by_port. The former iterates over all endpoints whereas the latter only iterates over the endpoints in a given port. The former is mostly useful for existing drivers that currently implement the iteration over all the endpoints themselves whereas the latter is especially intended for devices with both sinks and sources: async sub-devices for external devices connected to the device's sources will have already been set up, or the external sub-devices are part of the master device. Depends-on: ("device property: preserve usecount for node passed to of_fwnode_graph_get_port_parent()") Signed-off-by: -
Sakari Ailus authored
The V4L2 async wasn't part of the documentation build. Fix this. Signed-off-by:
-
Sakari Ailus authored
Rename internal functions to make the names of the functions better describe what they do. Old name New name v4l2_async_test_notify v4l2_async_match_notify v4l2_async_belongs v4l2_async_find_match Signed-off-by:
-
Sakari Ailus authored
The check whether an async sub-device is bound to a notifier was performed without list_lock held, making it possible for another process to unbind the async sub-device before the sub-device unregistration function proceeds to take the lock. Fix this by first acquiring the lock and then proceeding with the check. Signed-off-by:
-
Sakari Ailus authored
The notifier complete callback may return an error. This error code was simply returned to the caller but never handled properly. Move calling the complete callback function to the caller from v4l2_async_test_notify and undo the work that was done either in async sub-device or async notifier registration. Reported-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Niklas Söderlund authored
The call to v4l2_async_cleanup() will set sd->asd to NULL so passing it to notifier->unbind() has no effect and leaves the notifier confused. Call the unbind() callback prior to cleaning up the subdevice to avoid this. Signed-off-by:
-
Sakari Ailus authored
v4l2_async_cleanup() is called when the async sub-device is unbound from the media device. As the pointer is set by the driver registering the async sub-device, leave the pointer as set by the driver. Signed-off-by:
-
Sakari Ailus authored
Remove V4L2 async re-probing support. The re-probing support has been there to support cases where the sub-devices require resources provided by the main driver's hardware to function, such as clocks. Reprobing has allowed unbinding and again binding the main driver without explicitly unbinding the sub-device drivers. This is certainly not a common need, and the responsibility will be the user's going forward. An alternative could have been to introduce notifier specific locks. Considering the complexity of the re-probing and that it isn't really a solution to a problem but a workaround, remove re-probing instead. If there is a need to support the clock provider unregister/register cycle while keeping the clock references in the consumers in the future, this should be implemented in the clock framework instead, not in V4L2. Signed-off-by:
-
Akinobu Mita authored
The test_pattern_menu[] array has two valid items and a null terminated item. So the control's maximum value which is passed to v4l2_ctrl_new_std_menu_items() should be one. However, 'ARRAY_SIZE(test_pattern_menu) - 1' is actually passed and it's not correct. Fix it by removing unnecessary terminated entry and let the correct control's maximum value be passed to v4l2_ctrl_new_std_menu_items(). Cc: Sylwester Nawrocki <sylvester.nawrocki@gmail.com> Cc: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by:
Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by:
-
Akinobu Mita authored
The v4l2_i2c_subdev_init() sets V4L2_SUBDEV_FL_IS_I2C flag in the subdev->flags. But this driver overwrites subdev->flags immediately after calling v4l2_i2c_subdev_init(). So V4L2_SUBDEV_FL_IS_I2C is not set after all. This stops breaking subdev->flags and preserves V4L2_SUBDEV_FL_IS_I2C. Side note: According to the comment in v4l2_device_unregister(), this is problematic only if the device is platform bus device. Device tree or ACPI based devices are not affected. Cc: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by:
-
