This updates an earlier patch that added bcdDevice values for a new
USB peripheral controller.  The values weren't valid BCD numbers.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Goof found by compile warning.


From: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

This patch enables usage of another USB2 100BASE-T adapter.
http://www.corega.co.jp/product/list/lanadp/feusb2tx.htm

From:          Naoki Shibata <zupae234@yahoo.co.jp>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

I posted this before, but didn't see any discussion.

This patch fixes a couple of places where the usb subsystem
DMAs to/from local (stack) variables.  This doesn't work on
non-cache-coherent processors.  I'm testing on PPC 4xx systems.
Signed-off-by: Dale Farnsworth <dale@farnsworth.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

A few devices prefer not to have full-speed bandwidth reclamation turned
on while they are being enumerated.  In particular this seems to be true
for the USB Bluetooth adapters built in to some laptop models (used for
remote keyboards).  This patch alters the UHCI driver so that control URBs
for devices still in the USB_STATE_DEFAULT state will be placed on the
low-speed queue rather than the full-speed queue.  Since the low-speed
queue isn't subject to bandwidth reclamation the devices will work
properly.  The negative impact on other devices is minimal; the process of
device initialization will be slowed down by a few milliseconds.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

In order for network device lifetime stuff to work properly, it is necessary
for devices to allocate private data as part of alloc_etherdev.
Also, netdev_priv() is improvement over dereferencing netdev->priv
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Change other usb network driver to use alloc_etherdev to allocate the
private data structure. And use netdev_priv to find it.
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Oliver Neukum <oliver@neukum.name>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Basic HID driver support for USB suspend/resume.  At least one keyboard
works OK as a remote wakeup source ... unless you write the sysfs
power/state attribute using that USB keyboard, in which case the input
subsystem reports an endless stream of newlines!  :)

Someone still needs to implement some configurable timer to support the
"suspend idle mice/keyboards/..." policy for devices that can issue
wakeup events.  In conjunction with autosuspend policies in hub and
HCD (UHCI) code, that could allegedly save 2W of power by enabling the
C3 state on Centrino laptops that use USB mice.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Some of the recent changes to change how descriptors are read have managed
to confuse one USB keyboard.  It recovers OK with a few retries though.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

I have extended my driver to add support of the embedded USB port provided by
some new Texas Instruments' handhelds. Things are the same except for the
maximum packet size.

Description: add support of the USB port embedded on some new TI handhelds (TI84+ and TI89 Titanium).

Thanks, Romain.
Signed-off-by: Romain Lievin <lkml@lievin.net>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

 Add module version information for usb/serial/belkin_sa.c.
Signed-off-by: Luiz Capitulino <lcapitulino@conectiva.com.br>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

 Add module version information for usb/serial/pl2303.c.
Signed-off-by: Luiz Capitulino <lcapitulino@conectiva.com.br>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

 Add module version information for drivers/usb/serial/cyberjack.c.
Signed-off-by: Luiz Capitulino <lcapitulino@conectiva.com.br>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

the appended patch is not in yet, what gives? I sent it to Marcelo with
an understanding that it would be in Linus tree any day now. It was a couple
of months ago. It's not just BKL witchhunt either. I remember that it fixed
an oops, although I do not remember the precise scenario by now (it had
something to do with a race between ->release and ->disconnect).


From: Pete Zaitcev <zaitcev@redhat.com>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

This patch adds recognition/support for the PharosGPS puck, as included with
Microsoft's Streets and Trips package.  The device has an inline
USB-to-serial converter which functions as a PL2303 but with different
VENDOR_ID and PRODUCT_ID, and so the PL2303 driver is modified to recognize
this additional device.

Signed-off by: Robert C. Olsen, III [pl2303@2005dauphin.org]
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Small W996[87]CF documentation updates.
Signed-off-by: Luca Risolia <luca.risolia@studio.unibo.it>

A recent patch introduced this reference counting leak.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>


===== drivers/usb/core/usb.c 1.293 vs edited =====

Following the recommendation of James Bottomley (of SCSI fame), this patch
changes the queuecommand() routine so that when a command is received for a
disconnected device, instead of accepting the command and then ignoring it,
we fail the command immediately with DID_NO_CONNECT.

This fixes a timeout-abort-oops sequence that would occur when the
higher-level drivers (mostly the CD driver) try to queue a SYNCHRONIZE
CACHE command during scsi_remove_host().
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Matthew Dharm <mdharm-usb@one-eyed-alien.net>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>


===== drivers/usb/storage/scsiglue.c 1.84 vs edited =====

Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

originally written by Sean Young <sean@mess.org> but with LED additions and
cleanups from me.
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

into ppc970.osdl.org:/home/torvalds/v2.6/linux

into ppc970.osdl.org:/home/torvalds/v2.6/linux

Fix incorrect attempt to doubly-initialise the ethtool ops.

Cc: <jgarzik@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

The scsihosts boot parameter was removed in 2.5.73, but references to it
still exist in docs.  Cleanup below.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

The orphan list holds inodes that need to be truncated on recovery.  In the
O_DIRECT case, it's used if we extend the inode --- the truncate on recovery
means we'll recover the newly-allocated disk blocks if we crash after the IO
starts but before i_size is updated on disk.

Now, the orphan list is *also* used to delete inodes that are unlinked but
still-open.  Those get truncated but also deleted on recovery.

The orphan list is held both in memory and on disk.  So the rules are that the
inode can't be reclaimed while on the orphan list.  There are only two cases
--- either the inode is actively being written(O_DIRECT) or truncated (in
which case the inode is by definition not going to be reused), or it's
unlinked but still open (again, non-reclaimable).

But in the case where you're truncating or write(O_DIRECT)ing a file that is
*ALSO* unlinked, there's a problem --- the final unlink would put the inode on
the orphan list, but the write/truncate would try to add/remove it.  End
result is that the inode disappears from the orphan list while it's still
unlinked-but-in-use.

That's just a leak-on-crash, it's not going to be detectable in normal use. 
But it's still a bug, and the way we fix it is for direct-IO and truncate not
to do the ext3_orphan_del if the file is unlinked (ie.  i_nlink==0).
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Add the new lock manager callbacks to the documentation
Signed-off-by: Andy Adamson <andros@citi.umich.edu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Export remove_lease(), an interface to time_out_leases() with an
fl_break_time in the past.  needed by nfsd
Signed-off-by: Andy Adamson <andros@citi.umich.edu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Export setlease(), a direct interface to __setlease() used by nfsd
Signed-off-by: Andy Adamson <andros@citi.umich.edu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Use the inode i_writecount to test for handing out a F_RDLCK lease.
Signed-off-by: Andy Adamson <andros@citi.umich.edu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

nfsd will not have a file descriptor, nor an owner on the filp.  nfsd also
will not use signals.  Seperate the lease processsing coe from
fcntl_setlease() into a __setlease() call.
Signed-off-by: Andy Adamson <andros@citi.umich.edu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Move the f_delown processing from lease_modify() into a new default lock
manager fl_release_private callback.
Signed-off-by: Andy Adamson <andros@citi.umich.edu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Separate the lease initialization code from lease_alloc().  set the default
lock manager ops.
Signed-off-by: Andy Adamson <andros@citi.umich.edu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

- Add a lock manager break callback to break_lease() for lock managers to
  initiate breaking a lease.

- Move the break_lease() kill_fasync() call to a default lock manager
  fl_break callback
Signed-off-by: Andy Adamson <andros@citi.umich.edu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Add a lock manager release private callback to locks_free_lock() for lock
manger lease clean-up.
Signed-off-by: Andy Adamson <andros@citi.umich.edu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

The following patches provide an interface to the lease subsystem in the
current VFS locking code.  NFSv4 delegations and Samba op-locks share most
architecture features.  The version 4 NFS server delegation implementation
should use leases to co-ordinate behavior between local, Samba, and NFS
access.


The main design points are

- Seperate the fcntl interface from the file_lock FL_LEASE processing in
  fcntl_setlease, creating __setlease() called by fcntl_setlease()

- Add new lock_manager callbacks to enable lease properties to be set,
  leases to be broken, and leases to be cleaned up: with default callbacks
  preserving the current fcntl_setlease properties.

- Add a new interface, setlease() which also calls __setlease(), and
  remove_lease() for kernel lease managers (e.g.  the v4 NFS server)


This patch:

Add a lock manager copy lock callback to locks_copy_lock() so that nfsd can
set lease properties.
Signed-off-by: Andy Adamson <andros@citi.umich.edu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This patch uses the REISERFS_UNSUPPORTED_OPT flag to denote -o(no)acl, and
-o(no)user_xattr as unsupported, but allowable, when support isn't built
into the kernel.
Signed-off-by: Jeff Mahoney <jeffm@novell.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>