- 12 Dec, 2015 1 commit
-
-
Karsten Merker authored
Trivial typo fix ("mut" -> "must") in the sunxi LRADC-keys binding documentation. Signed-off-by: Karsten Merker <merker@debian.org> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 11 Dec, 2015 1 commit
-
-
Javier Martinez Canillas authored
The Atmel maxtouch DT binding documents that the compatible string for the device is "atmel,maxtouch" and the I2C core always reports a module alias of the form i2c:alias where alias is the compatible string model: $ grep MODALIAS /sys/devices/platform/12e00000.i2c/i2c-8/8-004b/uevent MODALIAS=i2c:maxtouch But there isn't maxtouch entry in the I2C device ID table so when the i2c:maxtouch MODALIAS uevent is reported, kmod is not able to match the alias with a module to load: $ modinfo atmel_mxt_ts | grep alias alias: of:N*T*Catmel,maxtouch alias: i2c:mXT224 alias: i2c:atmel_mxt_tp alias: i2c:atmel_mxt_ts alias: i2c:qt602240_ts So add the maxtouch entry to the I2C device ID table to allow the module to be autoloaded when the device is registered via OF. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 03 Dec, 2015 1 commit
-
-
Charles Keepax authored
A small copy and paste error was preventing the haptics device being disabled. This patch corrects the value written on disable. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 02 Dec, 2015 2 commits
-
-
Vladis Dronov authored
The aiptek driver crashes in aiptek_probe() when a specially crafted USB device without endpoints is detected. This fix adds a check that the device has proper configuration expected by the driver. Also an error return value is changed to more matching one in one of the error paths. Reported-by: Ralf Spenneberg <ralf@spenneberg.net> Signed-off-by: Vladis Dronov <vdronov@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Dmitry Torokhov authored
Apparently people are installing generic Linux distributions not only on Pixels but also on other Chromebooks. Unfortunately on all of them Atmel parts assigned names ATML0000 and ATML0001, and do not carry any other configuration data. So let's create generic instance of platform data that should cover most of them (we assume that they will not be using T100 objects, since with those Google mapped BTN_LEFT onto a different GPIO, so slightly different keymap would be needed, but I think we used parts with T100 on ARM devices where we thankfully have DTS and can describe the devices better). Tested-by: Rich K <rgkirch@gmail.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 17 Nov, 2015 5 commits
-
-
Sudip Mukherjee authored
parkbd_parport_cb is a local uninitialized structure and the member function pointers will be pointing to arbitrary locations unless they are cleared. Fixes: 33ca8ab9 ("Input: parkbd - use parallel port device model") Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Sudip Mukherjee authored
walkera0701_parport_cb is a local uninitialized structure and the member function pointers will be pointing to arbitrary locations unless they are cleared. Fixes: 221bcb24 ("Input: walkera0701 - use parallel port device model") Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Sudip Mukherjee authored
tgfx_parport_cb is a local uninitialized structure and the member function pointers will be pointing to arbitrary locations unless they are cleared. Fixes: 4de27a63 ("Input: turbografx - use parallel port device model") Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Sudip Mukherjee authored
gc_parport_cb is a local uninitialized structure and the member function pointers will be pointing to arbitrary locations unless they are cleared. Fixes: a517e87c ("Input: gamecon - use parallel port device model") Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Sudip Mukherjee authored
db9_parport_cb is a local uninitialized structure and the member function pointers will be pointing to arbitrary locations unless they are cleared. Fixes: 2260c419 ("Input: db9 - use parallel port device model") Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 13 Nov, 2015 1 commit
-
-
Dmitry Torokhov authored
Prepare second round of input updates for 4.3 merge window.
-
- 09 Nov, 2015 1 commit
-
-
Geert Uytterhoeven authored
WARNING: vmlinux.o(.text+0x1056606): Section mismatch in reference from the function parkbd_attach() to the function .init.text:parkbd_allocate_serio() The function parkbd_attach() references the function __init parkbd_allocate_serio(). This is often because parkbd_attach lacks a __init annotation or the annotation of parkbd_allocate_serio is wrong. Commit 33ca8ab9 ("Input: parkbd - use parallel port device model") dropped the __init attribute from the sole caller of parkbd_allocate_serio(), but forgot to remove it from parkbd_allocate_serio() itself. Fixes: 33ca8ab9 ("Input: parkbd - use parallel port device model") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 06 Nov, 2015 1 commit
-
-
Takashi Iwai authored
Another Lifebook machine that needs the same quirk as other similar models to make the driver working. Bugzilla: https://bugzilla.opensuse.org/show_bug.cgi?id=883192 Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 05 Nov, 2015 2 commits
-
-
Arnd Bergmann authored
The input_configured callback was recently changed to return an 'int', but the newly added driver uses the old API: drivers/hid/hid-gfrm.c:151:22: warning: initialization from incompatible pointer type [-Wincompatible-pointer-types] This changes the driver like the other ones. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 34fc1322 ("HID: hid-gfrm: Google Fiber TV Box remote controls") Fixes: b2c68a2f ("HID: hid-input: allow input_configured callback return errors") Acked-by: Petri Gynther <pgynther@google.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Dmitry Torokhov authored
When configuring input device via input_configured callback we may encounter errors (for example input_mt_init_slots() may fail). Instead of continuing with half-initialized input device let's allow driver indicate failures. Signed-off-by: Jaikumar Ganesh <jaikumarg@android.com> Signed-off-by: Arve Hjønnevåg <arve@android.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Acked-by: Nikolai Kondrashov <Nikolai.Kondrashov@redhat.com> Acked-by: Andrew Duggan <aduggan@synaptics.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
-
- 03 Nov, 2015 4 commits
-
-
Michael Welling authored
This adds support for the i2c based tsc2004 touchscreen controller. Signed-off-by: Michael Welling <mwelling@ieee.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Michael Welling authored
The functions, variables, and defines of the new tsc200x-core.c are renamed to tsc200x instead of tsc2005 avoid possible confusion. Signed-off-by: Michael Welling <mwelling@ieee.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Michael Welling authored
This patch separates the SPI functionality from core functionality that overlaps with the tsc2004. Prepares kernel for new tsc2004 driver without much redundant code. Signed-off-by: Michael Welling <mwelling@ieee.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Dmitry Torokhov authored
Prepare first round of input updates for 4.3 merge window.
-
- 31 Oct, 2015 1 commit
-
-
Aniroop Mathur authored
clk_type and clkid stores different predefined clock identification values so they cannot be compared for checking duplicate clock change request. Therefore, lets fix it to avoid unexpected results. Signed-off-by: Aniroop Mathur <a.mathur@samsung.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 28 Oct, 2015 1 commit
-
-
Stephen Chandler Paul authored
Debugging input devices, specifically laptop touchpads, can be tricky without having the physical device handy. Here we try to remedy that with userio. This module allows an application to connect to a character device provided by the kernel, and emulate any serio device. In combination with userspace programs that can record PS/2 devices and replay them through the /dev/userio device, this allows developers to debug driver issues on the PS/2 level with devices simply by requesting a recording from the user experiencing the issue without having to have the physical hardware in front of them. Signed-off-by: Stephen Chandler Paul <cpaul@redhat.com> Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 27 Oct, 2015 3 commits
-
-
David Herrmann authored
Hardware manufacturers group keys in the weirdest way possible. This may cause a power-key to be grouped together with normal keyboard keys and thus be reported on the same kernel interface. However, user-space is often only interested in specific sets of events. For instance, daemons dealing with system-reboot (like systemd-logind) listen for KEY_POWER, but are not interested in any main keyboard keys. Usually, power keys are reported via separate interfaces, however, some i8042 boards report it in the AT matrix. To avoid waking up those system daemons on each key-press, we had two ideas: - split off KEY_POWER into a separate interface unconditionally - allow filtering a specific set of events on evdev FDs Splitting of KEY_POWER is a rather weird way to deal with this and may break backwards-compatibility. It is also specific to KEY_POWER and might be required for other stuff, too. Moreover, we might end up with a huge set of input-devices just to have them properly split. Hence, this patchset implements the second idea: An event-mask to specify which events you're interested in. Two ioctls allow setting this mask for each event-type. If not set, all events are reported. The type==0 entry is used same as in EVIOCGBIT to set the actual EV_* mask of filtered events. This way, you have a two-level filter. We are heavily forward-compatible to new event-types and event-codes. So new user-space will be able to run on an old kernel which doesn't know the given event-codes or event-types. Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Javier Martinez Canillas authored
Remove the unneded semicolon since it is clearly a typo error. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Hans de Goede authored
commit 92bac83d ("Input: alps - non interleaved V2 dualpoint has separate stick button bits") assumes that all alps v2 non-interleaved dual point setups have the separate stick button bits. Later we limited this to Dell laptops only because of reports that this broke things on non Dell laptops. Now it turns out that this breaks things on the Dell Latitude D600 too. So it seems that only the Dell Latitude D420/430/620/630, which all share the same touchpad / stick combo, have these separate bits. This patch limits the checking of the separate bits to only these models fixing regressions with other models. Reported-and-tested-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: stable@vger.kernel.org Tested-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-By: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 26 Oct, 2015 4 commits
-
-
Petri Gynther authored
Add HID driver for Google Fiber TV Box remote controls Signed-off-by: Petri Gynther <pgynther@google.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Moritz Fischer authored
The driver is now used for the entire USRP e3xx series, this commit fixes the description that will be displayed in the menu accordingly. Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Sudeep Holla authored
The driver handles wakeup irq correctly using device_init_wakeup and enable_irq_wake. There's no need to use IRQF_NO_SUSPEND while registering the interrupt. This patch removes the use of IRQF_NO_SUSPEND flag. Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Sudeep Holla authored
Though the tegra-kbc driver should/will continue to support the legacy "nvidia,wakeup-source" property to enable keyboard as the wakeup source, we need to add support for the new standard property "wakeup-source". This patch adds support for "wakeup-source" property in addition to the existing "nvidia,wakeup-source" property. Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 23 Oct, 2015 3 commits
-
-
Insu Yun authored
Internally, xenbus_printf uses memory allocation, so it can fail under memory pressure, leaving the input device configured as absolute with the backend supplying relative coordinates. Signed-off-by: Insu Yun <wuninsu@gmail.com> Reviewed-by: Julien Grall <julien.grall@citrix.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
WEN Pingbo authored
hp_sdc_rtc_proc_show() use timeval to store the time, which will overflow in 2038. This patch fixes this problem by replacing timeval with timespec64. hp_sdc_rtc_proc_show() only output string, so that userspace will work normally if we apply this patch. Not all timer in i8042 have y2038 risk(handshake, match timer, etc), Replacements in those timer are just for consistency. Signed-off-by: WEN Pingbo <pingbo.wen@linaro.org> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Geliang Tang authored
s/regsiter/register/ Signed-off-by: Geliang Tang <geliangtang@163.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 19 Oct, 2015 1 commit
-
-
Pavel Rojtberg authored
Do not call xpad_identify_controller at init with wireless devices: it conflicts with the already sent presence packet and will be called by xpad360w_process_packet as needed anyway. Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 18 Oct, 2015 1 commit
-
-
Randy Dunlap authored
Fix build errors due to missing Kconfig dependency. drivers/built-in.o: In function `sur40_disconnect': sur40.c:(.text+0x22be6e): undefined reference to `video_unregister_device' sur40.c:(.text+0x22be77): undefined reference to `v4l2_device_unregister' drivers/built-in.o: In function `sur40_process_video': sur40.c:(.text+0x22c1d4): undefined reference to `v4l2_get_timestamp' drivers/built-in.o: In function `sur40_probe': sur40.c:(.text+0x22ca82): undefined reference to `v4l2_device_register' sur40.c:(.text+0x22cb1a): undefined reference to `v4l2_device_unregister' sur40.c:(.text+0x22cbf7): undefined reference to `video_device_release_empty' sur40.c:(.text+0x22cc53): undefined reference to `__video_register_device' sur40.c:(.text+0x22cc90): undefined reference to `video_unregister_device' drivers/built-in.o: In function `sur40_vidioc_querycap': sur40.c:(.text+0x22ccb0): undefined reference to `video_devdata' Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 17 Oct, 2015 1 commit
-
-
Vladimir Zapolskiy authored
If common clock framework is configured, the driver generates a warning, which is fixed by this change: root@devkit3250:~# cat /dev/input/touchscreen0 ------------[ cut here ]------------ WARNING: CPU: 0 PID: 720 at drivers/clk/clk.c:727 clk_core_enable+0x2c/0xa4() Modules linked in: sc16is7xx snd_soc_uda1380 CPU: 0 PID: 720 Comm: cat Not tainted 4.3.0-rc2+ #199 Hardware name: LPC32XX SoC (Flattened Device Tree) Backtrace: [<>] (dump_backtrace) from [<>] (show_stack+0x18/0x1c) [<>] (show_stack) from [<>] (dump_stack+0x20/0x28) [<>] (dump_stack) from [<>] (warn_slowpath_common+0x90/0xb8) [<>] (warn_slowpath_common) from [<>] (warn_slowpath_null+0x24/0x2c) [<>] (warn_slowpath_null) from [<>] (clk_core_enable+0x2c/0xa4) [<>] (clk_core_enable) from [<>] (clk_enable+0x24/0x38) [<>] (clk_enable) from [<>] (lpc32xx_setup_tsc+0x18/0xa0) [<>] (lpc32xx_setup_tsc) from [<>] (lpc32xx_ts_open+0x14/0x1c) [<>] (lpc32xx_ts_open) from [<>] (input_open_device+0x74/0xb0) [<>] (input_open_device) from [<>] (evdev_open+0x110/0x16c) [<>] (evdev_open) from [<>] (chrdev_open+0x1b4/0x1dc) [<>] (chrdev_open) from [<>] (do_dentry_open+0x1dc/0x2f4) [<>] (do_dentry_open) from [<>] (vfs_open+0x6c/0x70) [<>] (vfs_open) from [<>] (path_openat+0xb4c/0xddc) [<>] (path_openat) from [<>] (do_filp_open+0x40/0x8c) [<>] (do_filp_open) from [<>] (do_sys_open+0x124/0x1c4) [<>] (do_sys_open) from [<>] (SyS_open+0x2c/0x30) [<>] (SyS_open) from [<>] (ret_fast_syscall+0x0/0x38) Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 16 Oct, 2015 6 commits
-
-
Franklin S Cooper Jr authored
In the touchscreen controller ISR, reading the tsc starting from register 0x2 causes the tsc to infrequently update the detected finger's x and y coordinate. The irq pin toggles at a fast rate to indicate touch events are happening. However, the tsc on average updates the touch point's x and y value every ~100 ms which is much slower than the advertised rate of 100+ Hz. This leads to multiple reads within this ~100 ms time window returning the same value. Example: X: 10 , Y: 30 X: 10 , Y: 30 X: 10, Y: 30 .. // After 100 ms X: 300, Y: 300 X: 300, y: 300 .. // After 100 ms X: 1743, Y: 621 X: 1743, Y: 621 For some reason if instead of starting to read at register 0x2 you start reading at register 0x0 this issue isn't seen. This seems like a quirk only seen in the EDT FT5506 so to fix this issue simply adjust the code to start reading from 0x0. Technically this isn't wrong so no regressions should be seen with other touchscreen controllers supported by this driver. Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Franklin S Cooper Jr authored
FT5506 is essentially the same as other FT5x06 devices other than supporting 10 support points. Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Franklin S Cooper Jr authored
Update the code so that the maximum supported points aren't hard coded but can be changed. Set the maximum support points based on the data passed along side the compatible field. Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Franklin S Cooper Jr authored
Calculate the amount of data that needs to be read for the specified max number of support points. If the maximum number of support points changes then the amount that is read from the touch screen controller should reflect this. Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Ezequiel Garcia authored
Some encoders have both outputs low in stable states, others also have a stable state with both outputs high (half-period mode) and some have a stable state in all steps (quarter-period mode). The driver used to support the former states and with this change it can also support the later. This commit also deprecates the 'half-period' property and introduces a new property 'steps-per-period'. This property specifies the number of steps (stable states) produced by the rotary encoder for each GPIO period. Signed-off-by: Guido Martínez <guido@vanguardiasur.com.ar> Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Ben Gamari authored
This commit makes uses of_property_read_bool() to read boolean properties. This is just cosmetic cleanup. Signed-off-by: Ben Gamari <bgamari.foss@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-