Commit ecedd3d7 ("block, bfq: get extra ref to prevent a queue
from being freed during a group move") gets an extra reference to a
bfq_queue before possibly deactivating it (temporarily), in
bfq_bfqq_move(). This prevents the bfq_queue from disappearing before
being reactivated in its new group.

Yet, the bfq_queue may also be expired (i.e., its service may be
stopped) before the bfq_queue is deactivated. And also an expiration
may lead to a premature freeing. This commit fixes this issue by
simply moving forward the getting of the extra reference already
introduced by commit ecedd3d7 ("block, bfq: get extra ref to
prevent a queue from being freed during a group move").

Reported-by: cki-project@redhat.com
Tested-by: cki-project@redhat.com
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

In bfq_idle_slice_timer func, bfqq = bfqd->in_service_queue is
not in bfqd-lock critical section. The bfqq, which is not
equal to NULL in bfq_idle_slice_timer, may be freed after passing
to bfq_idle_slice_timer_body. So we will access the freed memory.

In addition, considering the bfqq may be in race, we should
firstly check whether bfqq is in service before doing something
on it in bfq_idle_slice_timer_body func. If the bfqq in race is
not in service, it means the bfqq has been expired through
__bfq_bfqq_expire func, and wait_request flags has been cleared in
__bfq_bfqd_reset_in_service func. So we do not need to re-clear the
wait_request of bfqq which is not in service.

KASAN log is given as follows:
[13058.354613] ==================================================================
[13058.354640] BUG: KASAN: use-after-free in bfq_idle_slice_timer+0xac/0x290
[13058.354644] Read of size 8 at addr ffffa02cf3e63f78 by task fork13/19767
[13058.354646]
[13058.354655] CPU: 96 PID: 19767 Comm: fork13
[13058.354661] Call trace:
[13058.354667]  dump_backtrace+0x0/0x310
[13058.354672]  show_stack+0x28/0x38
[13058.354681]  dump_stack+0xd8/0x108
[13058.354687]  print_address_description+0x68/0x2d0
[13058.354690]  kasan_report+0x124/0x2e0
[13058.354697]  __asan_load8+0x88/0xb0
[13058.354702]  bfq_idle_slice_timer+0xac/0x290
[13058.354707]  __hrtimer_run_queues+0x298/0x8b8
[13058.354710]  hrtimer_interrupt+0x1b8/0x678
[13058.354716]  arch_timer_handler_phys+0x4c/0x78
[13058.354722]  handle_percpu_devid_irq+0xf0/0x558
[13058.354731]  generic_handle_irq+0x50/0x70
[13058.354735]  __handle_domain_irq+0x94/0x110
[13058.354739]  gic_handle_irq+0x8c/0x1b0
[13058.354742]  el1_irq+0xb8/0x140
[13058.354748]  do_wp_page+0x260/0xe28
[13058.354752]  __handle_mm_fault+0x8ec/0x9b0
[13058.354756]  handle_mm_fault+0x280/0x460
[13058.354762]  do_page_fault+0x3ec/0x890
[13058.354765]  do_mem_abort+0xc0/0x1b0
[13058.354768]  el0_da+0x24/0x28
[13058.354770]
[13058.354773] Allocated by task 19731:
[13058.354780]  kasan_kmalloc+0xe0/0x190
[13058.354784]  kasan_slab_alloc+0x14/0x20
[13058.354788]  kmem_cache_alloc_node+0x130/0x440
[13058.354793]  bfq_get_queue+0x138/0x858
[13058.354797]  bfq_get_bfqq_handle_split+0xd4/0x328
[13058.354801]  bfq_init_rq+0x1f4/0x1180
[13058.354806]  bfq_insert_requests+0x264/0x1c98
[13058.354811]  blk_mq_sched_insert_requests+0x1c4/0x488
[13058.354818]  blk_mq_flush_plug_list+0x2d4/0x6e0
[13058.354826]  blk_flush_plug_list+0x230/0x548
[13058.354830]  blk_finish_plug+0x60/0x80
[13058.354838]  read_pages+0xec/0x2c0
[13058.354842]  __do_page_cache_readahead+0x374/0x438
[13058.354846]  ondemand_readahead+0x24c/0x6b0
[13058.354851]  page_cache_sync_readahead+0x17c/0x2f8
[13058.354858]  generic_file_buffered_read+0x588/0xc58
[13058.354862]  generic_file_read_iter+0x1b4/0x278
[13058.354965]  ext4_file_read_iter+0xa8/0x1d8 [ext4]
[13058.354972]  __vfs_read+0x238/0x320
[13058.354976]  vfs_read+0xbc/0x1c0
[13058.354980]  ksys_read+0xdc/0x1b8
[13058.354984]  __arm64_sys_read+0x50/0x60
[13058.354990]  el0_svc_common+0xb4/0x1d8
[13058.354994]  el0_svc_handler+0x50/0xa8
[13058.354998]  el0_svc+0x8/0xc
[13058.354999]
[13058.355001] Freed by task 19731:
[13058.355007]  __kasan_slab_free+0x120/0x228
[13058.355010]  kasan_slab_free+0x10/0x18
[13058.355014]  kmem_cache_free+0x288/0x3f0
[13058.355018]  bfq_put_queue+0x134/0x208
[13058.355022]  bfq_exit_icq_bfqq+0x164/0x348
[13058.355026]  bfq_exit_icq+0x28/0x40
[13058.355030]  ioc_exit_icq+0xa0/0x150
[13058.355035]  put_io_context_active+0x250/0x438
[13058.355038]  exit_io_context+0xd0/0x138
[13058.355045]  do_exit+0x734/0xc58
[13058.355050]  do_group_exit+0x78/0x220
[13058.355054]  __wake_up_parent+0x0/0x50
[13058.355058]  el0_svc_common+0xb4/0x1d8
[13058.355062]  el0_svc_handler+0x50/0xa8
[13058.355066]  el0_svc+0x8/0xc
[13058.355067]
[13058.355071] The buggy address belongs to the object at ffffa02cf3e63e70#012 which belongs to the cache bfq_queue of size 464
[13058.355075] The buggy address is located 264 bytes inside of#012 464-byte region [ffffa02cf3e63e70, ffffa02cf3e64040)
[13058.355077] The buggy address belongs to the page:
[13058.355083] page:ffff7e80b3cf9800 count:1 mapcount:0 mapping:ffff802db5c90780 index:0xffffa02cf3e606f0 compound_mapcount: 0
[13058.366175] flags: 0x2ffffe0000008100(slab|head)
[13058.370781] raw: 2ffffe0000008100 ffff7e80b53b1408 ffffa02d730c1c90 ffff802db5c90780
[13058.370787] raw: ffffa02cf3e606f0 0000000000370023 00000001ffffffff 0000000000000000
[13058.370789] page dumped because: kasan: bad access detected
[13058.370791]
[13058.370792] Memory state around the buggy address:
[13058.370797]  ffffa02cf3e63e00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fb fb
[13058.370801]  ffffa02cf3e63e80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[13058.370805] >ffffa02cf3e63f00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[13058.370808]                                                                 ^
[13058.370811]  ffffa02cf3e63f80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[13058.370815]  ffffa02cf3e64000: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
[13058.370817] ==================================================================
[13058.370820] Disabling lock debugging due to kernel taint

Here, we directly pass the bfqd to bfq_idle_slice_timer_body func.
--
V2->V3: rewrite the comment as suggested by Paolo Valente
V1->V2: add one comment, and add Fixes and Reported-by tag.

Fixes: aee69d78 ("block, bfq: introduce the BFQ-v0 I/O scheduler as an extra scheduler")
Acked-by: Paolo Valente <paolo.valente@linaro.org>
Reported-by: Wang Wang <wangwang2@huawei.com>
Signed-off-by: Zhiqiang Liu <liuzhiqiang26@huawei.com>
Signed-off-by: Feilong Lin <linfeilong@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block/genhd provides set_capacity_revalidate_and_notify() for sending RESIZE
notifications via uevents. This notification is newly added to scsi sd.
Signed-off-by: Balbir Singh <sblbir@amazon.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block/genhd provides set_capacity_revalidate_and_notify() for
sending RESIZE notifications via uevents. This notification is
newly added to NVME devices
Signed-off-by: Balbir Singh <sblbir@amazon.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block/genhd provides set_capacity_revalidate_and_notify() for
sending RESIZE notifications via uevents.
Signed-off-by: Balbir Singh <sblbir@amazon.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block/genhd provides set_capacity_revalidate_and_notify() for sending RESIZE
notifications via uevents.
Signed-off-by: Balbir Singh <sblbir@amazon.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Allow block/genhd to notify user space (via udev) about disk size changes
using a new helper set_capacity_revalidate_and_notify(), which is a wrapper
on top of set_capacity(). set_capacity_revalidate_and_notify() will only
notify via udev if the current capacity or the target capacity is not zero
and iff the capacity changes.
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Someswarudu Sangaraju <ssomesh@amazon.com>
Signed-off-by: Balbir Singh <sblbir@amazon.com>
Reviewed-by: Bob Liu <bob.liu@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

submit_bio_wait() can be called from ioctl(BLKSECDISCARD), which
may take long time to complete, as Salman mentioned, 4K BLKSECDISCARD
takes up to 100 second on some devices. Also any block I/O operation
that occurs after the BLKSECDISCARD is submitted will also potentially
be affected by the hung task timeouts.

Another report is that task hang can be observed when running mkfs
over raid10 which takes a small max discard sectors limit because
of chunk size.

So prevent hung_check from firing by taking same approach used
in blk_execute_rq(), and the wake-up interval is set as half the
hung_check timer period, which keeps overhead low enough.

Cc: Salman Qazi <sqazi@google.com>
Cc: Jesse Barnes <jsbarnes@google.com>
Cc: Bart Van Assche <bvanassche@acm.org>
Link: https://lkml.org/lkml/2020/2/12/1193Reported-by: Salman Qazi <sqazi@google.com>
Reviewed-by: Jesse Barnes <jsbarnes@google.com>
Reviewed-by: Salman Qazi <sqazi@google.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Historically we only set the capacity to zero for devices that support
partitions (independ of actually having partitions created).  Doing that
is rather inconsistent, but changing it broke legacy udisks polling for
legacy ide-cdrom devices.  Use the crude a crude check for devices that
either are non-removable or partitionable to get the sane behavior for
most device while not breaking userspace for this particular setup.

Fixes: a1548b67 ("block: move rescan_partitions to fs/block_dev.c")
Reported-by: He Zhe <zhe.he@windriver.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: He Zhe <zhe.he@windriver.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Check for overflow in addition before checking for end-of-block-device.

Steps to reproduce:

	#define _GNU_SOURCE 1
	#include <sys/ioctl.h>
	#include <sys/types.h>
	#include <sys/stat.h>
	#include <fcntl.h>

	typedef unsigned long long __u64;

	struct blk_zone_range {
	        __u64 sector;
	        __u64 nr_sectors;
	};

	#define BLKRESETZONE    _IOW(0x12, 131, struct blk_zone_range)

	int main(void)
	{
	        int fd = open("/dev/nullb0", O_RDWR|O_DIRECT);
	        struct blk_zone_range zr = {4096, 0xfffffffffffff000ULL};
	        ioctl(fd, BLKRESETZONE, &zr);
	        return 0;
	}

BUG: KASAN: null-ptr-deref in submit_bio_wait+0x74/0xe0
Write of size 8 at addr 0000000000000040 by task a.out/1590

CPU: 8 PID: 1590 Comm: a.out Not tainted 5.6.0-rc1-00019-g359c92c0 #2
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20190711_202441-buildvm-armv7-10.arm.fedoraproject.org-2.fc31 04/01/2014
Call Trace:
 dump_stack+0x76/0xa0
 __kasan_report.cold+0x5/0x3e
 kasan_report+0xe/0x20
 submit_bio_wait+0x74/0xe0
 blkdev_zone_mgmt+0x26f/0x2a0
 blkdev_zone_mgmt_ioctl+0x14b/0x1b0
 blkdev_ioctl+0xb28/0xe60
 block_ioctl+0x69/0x80
 ksys_ioctl+0x3af/0xa50
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alexey Dobriyan (SK hynix) <adobriyan@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Weiping Zhang <zhangweiping@didiglobal.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

This patch changes the check condition for the validity/authentication
of the session.

1. The Host Session Number(HSN) in the response should match the HSN for
   the session.
2. The TPER Session Number(TSN) can never be less than 4096 for a regular
   session.

Reference:
Section 3.2.2.1   of https://trustedcomputinggroup.org/wp-content/uploads/TCG_Storage_Opal_SSC_Application_Note_1-00_1-00-Final.pdf
Section 3.3.7.1.1 of https://trustedcomputinggroup.org/wp-content/uploads/TCG_Storage_Architecture_Core_Spec_v2.01_r1.00.pdfCo-developed-by: Andrzej Jakowski <andrzej.jakowski@linux.intel.com>
Signed-off-by: Andrzej Jakowski <andrzej.jakowski@linux.intel.com>
Signed-off-by: Revanth Rajashekar <revanth.rajashekar@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

The kernel documentation includes a brief section about genhd
capabilities, but it turns out that the only documented
capability (GENHD_FL_MEDIA_CHANGE_NOTIFY) isn't used any more.

This patch removes that flag, and documents the rest, based on my
understanding of the current uses of these flags in the kernel. The
documentation is kept in the header file, alongside the declarations,
in the hope that it will be kept up-to-date in future; the kernel
documentation is changed to include the documentation generated from
the header file.

Because the ultimate goal is to provide some end-user
documentation (or end-administrator documentation), the comments are
perhaps more user-oriented than might be expected. Since the values
are shown to users in hexadecimal, the documentation lists them in
hexadecimal, and the constant declarations are adjusted to match.
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Stephen Kitt <steve@sk2.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Remove the comment about return value, since it is not valid after
commit 404b8f5a ("block: cleanup kick/queued handling").
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Remove 'q' from arguments since it is not used anymore after
commit 7e992f84 ("block: remove non mq parts from the
flush code").
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Both cmd and sense had been moved to scsi_request, so remove
the related comments to avoid confusion.

And as Bart suggested, move _blk_rq_prep_clone into the only
caller (blk_rq_prep_clone).
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Previously, blk_cleanup_queue has called blk_set_queue_dying to set the
flag, no need to do it again.
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Use the two functions to simplify code.
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Since the later description mentioned "checked against the new queue
limits", so make the change to avoid confusion.
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

There is a potential race between ioc_release_fn() and
ioc_clear_queue() as shown below, due to which below kernel
crash is observed. It also can result into use-after-free
issue.

context#1:				context#2:
ioc_release_fn()			__ioc_clear_queue() gets the same icq
->spin_lock(&ioc->lock);		->spin_lock(&ioc->lock);
->ioc_destroy_icq(icq);
  ->list_del_init(&icq->q_node);
  ->call_rcu(&icq->__rcu_head,
  	icq_free_icq_rcu);
->spin_unlock(&ioc->lock);
					->ioc_destroy_icq(icq);
					  ->hlist_del_init(&icq->ioc_node);
					  This results into below crash as this memory
					  is now used by icq->__rcu_head in context#1.
					  There is a chance that icq could be free'd
					  as well.

22150.386550:   <6> Unable to handle kernel write to read-only memory
at virtual address ffffffaa8d31ca50
...
Call trace:
22150.607350:   <2>  ioc_destroy_icq+0x44/0x110
22150.611202:   <2>  ioc_clear_queue+0xac/0x148
22150.615056:   <2>  blk_cleanup_queue+0x11c/0x1a0
22150.619174:   <2>  __scsi_remove_device+0xdc/0x128
22150.623465:   <2>  scsi_forget_host+0x2c/0x78
22150.627315:   <2>  scsi_remove_host+0x7c/0x2a0
22150.631257:   <2>  usb_stor_disconnect+0x74/0xc8
22150.635371:   <2>  usb_unbind_interface+0xc8/0x278
22150.639665:   <2>  device_release_driver_internal+0x198/0x250
22150.644897:   <2>  device_release_driver+0x24/0x30
22150.649176:   <2>  bus_remove_device+0xec/0x140
22150.653204:   <2>  device_del+0x270/0x460
22150.656712:   <2>  usb_disable_device+0x120/0x390
22150.660918:   <2>  usb_disconnect+0xf4/0x2e0
22150.664684:   <2>  hub_event+0xd70/0x17e8
22150.668197:   <2>  process_one_work+0x210/0x480
22150.672222:   <2>  worker_thread+0x32c/0x4c8

Fix this by adding a new ICQ_DESTROYED flag in ioc_destroy_icq() to
indicate this icq is once marked as destroyed. Also, ensure
__ioc_clear_queue() is accessing icq within rcu_read_lock/unlock so
that icq doesn't get free'd up while it is still using it.
Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
Co-developed-by: Pradeep P V K <ppvk@codeaurora.org>
Signed-off-by: Pradeep P V K <ppvk@codeaurora.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

This makes it possible to test the error path in blk_mq_realloc_hw_ctxs()
and also several error paths in null_blk.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Cc: Johannes Thumshirn <jth@kernel.org>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

If null_add_dev() fails then null_del_dev() is called with a NULL argument.
Make null_del_dev() handle this scenario correctly. This patch fixes the
following KASAN complaint:

null-ptr-deref in null_del_dev+0x28/0x280 [null_blk]
Read of size 8 at addr 0000000000000000 by task find/1062

Call Trace:
 dump_stack+0xa5/0xe6
 __kasan_report.cold+0x65/0x99
 kasan_report+0x16/0x20
 __asan_load8+0x58/0x90
 null_del_dev+0x28/0x280 [null_blk]
 nullb_group_drop_item+0x7e/0xa0 [null_blk]
 client_drop_item+0x53/0x80 [configfs]
 configfs_rmdir+0x395/0x4e0 [configfs]
 vfs_rmdir+0xb6/0x220
 do_rmdir+0x238/0x2c0
 __x64_sys_unlinkat+0x75/0x90
 do_syscall_64+0x6f/0x2f0
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Cc: Johannes Thumshirn <jth@kernel.org>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

If null_add_dev() fails, clear dev->nullb.

This patch fixes the following KASAN complaint:

BUG: KASAN: use-after-free in nullb_device_submit_queues_store+0xcf/0x160 [null_blk]
Read of size 8 at addr ffff88803280fc30 by task check/8409

Call Trace:
 dump_stack+0xa5/0xe6
 print_address_description.constprop.0+0x26/0x260
 __kasan_report.cold+0x7b/0x99
 kasan_report+0x16/0x20
 __asan_load8+0x58/0x90
 nullb_device_submit_queues_store+0xcf/0x160 [null_blk]
 configfs_write_file+0x1c4/0x250 [configfs]
 __vfs_write+0x4c/0x90
 vfs_write+0x145/0x2c0
 ksys_write+0xd7/0x180
 __x64_sys_write+0x47/0x50
 do_syscall_64+0x6f/0x2f0
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x7ff370926317
Code: 64 89 02 48 c7 c0 ff ff ff ff eb bb 0f 1f 80 00 00 00 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 24
RSP: 002b:00007fff2dd2da48 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007ff370926317
RDX: 0000000000000002 RSI: 0000559437ef23f0 RDI: 0000000000000001
RBP: 0000559437ef23f0 R08: 000000000000000a R09: 0000000000000001
R10: 0000559436703471 R11: 0000000000000246 R12: 0000000000000002
R13: 00007ff370a006a0 R14: 00007ff370a014a0 R15: 00007ff370a008a0

Allocated by task 8409:
 save_stack+0x23/0x90
 __kasan_kmalloc.constprop.0+0xcf/0xe0
 kasan_kmalloc+0xd/0x10
 kmem_cache_alloc_node_trace+0x129/0x4c0
 null_add_dev+0x24a/0xe90 [null_blk]
 nullb_device_power_store+0x1b6/0x270 [null_blk]
 configfs_write_file+0x1c4/0x250 [configfs]
 __vfs_write+0x4c/0x90
 vfs_write+0x145/0x2c0
 ksys_write+0xd7/0x180
 __x64_sys_write+0x47/0x50
 do_syscall_64+0x6f/0x2f0
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Freed by task 8409:
 save_stack+0x23/0x90
 __kasan_slab_free+0x112/0x160
 kasan_slab_free+0x12/0x20
 kfree+0xdf/0x250
 null_add_dev+0xaf3/0xe90 [null_blk]
 nullb_device_power_store+0x1b6/0x270 [null_blk]
 configfs_write_file+0x1c4/0x250 [configfs]
 __vfs_write+0x4c/0x90
 vfs_write+0x145/0x2c0
 ksys_write+0xd7/0x180
 __x64_sys_write+0x47/0x50
 do_syscall_64+0x6f/0x2f0
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Fixes: 2984c868 ("nullb: factor disk parameters")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Cc: Johannes Thumshirn <jth@kernel.org>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Instead of initializing null_blk hardware queues explicitly after the
request queue has been created, provide .init_hctx() and .exit_hctx()
callback functions. The latter functions are not only called during
request queue allocation but also when the number of hardware queues
changes. Allocate nr_cpu_ids queues during initialization to support
increasing the number of hardware queues above the initial hardware
queue count.

This change fixes increasing the number of hardware queues above the
initial number of hardware queues and also keeps nullb->nr_queues in
sync with the number of hardware queues.

Fixes: 45919fbf ("null_blk: Enable modifying 'submit_queues' after an instance has been configured")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Cc: Johannes Thumshirn <jth@kernel.org>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Although it is not clear to me why UBSAN complains when 'memory_backed'
is set, this patch suppresses the UBSAN complaint that is triggered when
setting that configfs attribute.

UBSAN: Undefined behaviour in drivers/block/null_blk_main.c:327:1
load of value 16 is not a valid value for type '_Bool'
CPU: 2 PID: 8396 Comm: check Not tainted 5.6.0-rc1-dbg+ #14
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
Call Trace:
 dump_stack+0xa5/0xe6
 ubsan_epilogue+0x9/0x26
 __ubsan_handle_load_invalid_value+0x6d/0x76
 nullb_device_memory_backed_store.cold+0x2c/0x38 [null_blk]
 configfs_write_file+0x1c4/0x250 [configfs]
 __vfs_write+0x4c/0x90
 vfs_write+0x145/0x2c0
 ksys_write+0xd7/0x180
 __x64_sys_write+0x47/0x50
 do_syscall_64+0x6f/0x2f0
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Cc: Johannes Thumshirn <jth@kernel.org>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

q->nr_hw_queues must only be updated once it is known that
blk_mq_realloc_hw_ctxs() has succeeded. Otherwise it can happen that
reallocation fails and that q->nr_hw_queues is larger than the number of
allocated hardware queues. This patch fixes the following crash if
increasing the number of hardware queues fails:

BUG: KASAN: null-ptr-deref in blk_mq_map_swqueue+0x775/0x810
Write of size 8 at addr 0000000000000118 by task check/977

CPU: 3 PID: 977 Comm: check Not tainted 5.6.0-rc1-dbg+ #8
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
Call Trace:
 dump_stack+0xa5/0xe6
 __kasan_report.cold+0x65/0x99
 kasan_report+0x16/0x20
 check_memory_region+0x140/0x1b0
 memset+0x28/0x40
 blk_mq_map_swqueue+0x775/0x810
 blk_mq_update_nr_hw_queues+0x468/0x710
 nullb_device_submit_queues_store+0xf7/0x1a0 [null_blk]
 configfs_write_file+0x1c4/0x250 [configfs]
 __vfs_write+0x4c/0x90
 vfs_write+0x145/0x2c0
 ksys_write+0xd7/0x180
 __x64_sys_write+0x47/0x50
 do_syscall_64+0x6f/0x2f0
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Fixes: ac0d6b92 ("block: Reduce the amount of memory required per request queue")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Johannes Thumshirn <jth@kernel.org>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

blk_mq_map_queues() and multiple .map_queues() implementations expect that
set->map[HCTX_TYPE_DEFAULT].nr_queues is set to the number of hardware
queues. Hence set .nr_queues before calling these functions. This patch
fixes the following kernel warning:

WARNING: CPU: 0 PID: 2501 at include/linux/cpumask.h:137
Call Trace:
 blk_mq_run_hw_queue+0x19d/0x350 block/blk-mq.c:1508
 blk_mq_run_hw_queues+0x112/0x1a0 block/blk-mq.c:1525
 blk_mq_requeue_work+0x502/0x780 block/blk-mq.c:775
 process_one_work+0x9af/0x1740 kernel/workqueue.c:2269
 worker_thread+0x98/0xe40 kernel/workqueue.c:2415
 kthread+0x361/0x430 kernel/kthread.c:255

Fixes: ed76e329 ("blk-mq: abstract out queue map") # v5.0
Reported-by: syzbot+d44e1b26ce5c3e77458d@syzkaller.appspotmail.com
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Cc: Johannes Thumshirn <jth@kernel.org>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

The 'hctx_list' member of struct blk_mq_hw_ctx is not a list head but
instead an entry in q->unused_hctx_list. Fix the comment above this
struct member.

Fixes: d386732b ("blk-mq: fill header with kernel-doc")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Cc: André Almeida <andrealmeid@collabora.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Pull ARM SoC fixes from Olof Johansson:
 "We've been accruing these for a couple of weeks, so the batch is a bit
  bigger than usual.

  Largest delta is due to a led-bl driver that is added -- there was a
  miscommunication before the merge window and the driver didn't make it
  in. Due to this, the platforms needing it regressed. At this point, it
  seemed easier to add the new driver than unwind the changes.

  Besides that, there are a handful of various fixes:

   - AMD tee memory leak fix

   - A handful of fixlets for i.MX SCU communication

   - A few maintainers woke up and realized DEBUG_FS had been missing
     for a while, so a few updates of that.

  ... and the usual collection of smaller fixes to various platforms"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (37 commits)
  ARM: socfpga_defconfig: Add back DEBUG_FS
  arm64: dts: socfpga: agilex: Fix gmac compatible
  ARM: bcm2835_defconfig: Explicitly restore CONFIG_DEBUG_FS
  arm64: dts: meson: fix gxm-khadas-vim2 wifi
  arm64: dts: meson-sm1-sei610: add missing interrupt-names
  ARM: meson: Drop unneeded select of COMMON_CLK
  ARM: dts: bcm2711: Add pcie0 alias
  ARM: dts: bcm283x: Add missing properties to the PWR LED
  tee: amdtee: fix memory leak in amdtee_open_session()
  ARM: OMAP2+: Fix compile if CONFIG_HAVE_ARM_SMCCC is not set
  arm: dts: dra76x: Fix mmc3 max-frequency
  ARM: dts: dra7: Add "dma-ranges" property to PCIe RC DT nodes
  bus: ti-sysc: Fix 1-wire reset quirk
  ARM: dts: r8a7779: Remove deprecated "renesas, rcar-sata" compatible value
  soc: imx-scu: Align imx sc msg structs to 4
  firmware: imx: Align imx_sc_msg_req_cpu_start to 4
  firmware: imx: scu-pd: Align imx sc msg structs to 4
  firmware: imx: misc: Align imx sc msg structs to 4
  firmware: imx: scu: Ensure sequential TX
  ARM: dts: imx7-colibri: Fix frequency for sd/mmc
  ...

Pull EDAC fix from Borislav Petkov:
 "Error reporting fix for synopsys_edac: do not overwrite partial
  decoded error message (Sherry Sun)"

* tag 'edac_urgent-2020-03-08' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
  EDAC/synopsys: Do not print an error with back-to-back snprintf() calls

Pull char/misc fixes from Greg KH:
 "Here are four small char/misc driver fixes for reported issues for
  5.6-rc5.

  These fixes are:

   - binder fix for a potential use-after-free problem found (took two
     tries to get it right)

   - interconnect core fix

   - altera-stapl driver fix

  All four of these have been in linux-next for a while with no reported
  issues"

* tag 'char-misc-5.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  binder: prevent UAF for binderfs devices II
  interconnect: Handle memory allocation errors
  altera-stapl: altera_get_note: prevent write beyond end of 'key'
  binder: prevent UAF for binderfs devices

Pull driver core and debugfs fixes from Greg KH:
 "Here are four small driver core / debugfs patches for 5.6-rc3:

   - debugfs api cleanup now that all debugfs_create_regset32() callers
     have been fixed up. This was waiting until after the -rc1 merge as
     these fixes came in through different trees

   - driver core sync state fixes based on reports of minor issues found
     in the feature

  All of these have been in linux-next with no reported issues"

* tag 'driver-core-5.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  driver core: Skip unnecessary work when device doesn't have sync_state()
  driver core: Add dev_has_sync_state()
  driver core: Call sync_state() even if supplier has no consumers
  debugfs: remove return value of debugfs_create_regset32()

Pull tty/serial fixes from Greg KH:
 "Here are some small tty/serial fixes for 5.6-rc5

  Just some small serial driver fixes, and a vt core fixup, full details
  are:

   - vt fixes for issues found by syzbot

   - serdev fix for Apple boxes

   - fsl_lpuart serial driver fixes

   - MAINTAINER update for incorrect serial files

   - new device ids for 8250_exar driver

   - mvebu-uart fix

  All of these have been in linux-next with no reported issues"

* tag 'tty-5.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  tty: serial: fsl_lpuart: free IDs allocated by IDA
  Revert "tty: serial: fsl_lpuart: drop EARLYCON_DECLARE"
  serdev: Fix detection of UART devices on Apple machines.
  MAINTAINERS: Add missed files related to Synopsys DesignWare UART
  serial: 8250_exar: add support for ACCES cards
  tty:serial:mvebu-uart:fix a wrong return
  vt: selection, push sel_lock up
  vt: selection, push console lock down

Pull USB/PHY fixes from Greg KH:
 "Here are some small USB and PHY driver fixes for reported issues for
  5.6-rc5.

  Included in here are:

   - phy driver fixes

   - new USB quirks

   - USB cdns3 gadget driver fixes

   - USB hub core fixes

  All of these have been in linux-next with no reported issues"

* tag 'usb-5.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: dwc3: gadget: Update chain bit correctly when using sg list
  usb: core: port: do error out if usb_autopm_get_interface() fails
  usb: core: hub: do error out if usb_autopm_get_interface() fails
  usb: core: hub: fix unhandled return by employing a void function
  usb: storage: Add quirk for Samsung Fit flash
  usb: quirks: add NO_LPM quirk for Logitech Screen Share
  usb: usb251xb: fix regulator probe and error handling
  phy: allwinner: Fix GENMASK misuse
  usb: cdns3: gadget: toggle cycle bit before reset endpoint
  usb: cdns3: gadget: link trb should point to next request
  phy: mapphone-mdm6600: Fix timeouts by adding wake-up handling
  phy: brcm-sata: Correct MDIO operations for 40nm platforms
  phy: ti: gmii-sel: do not fail in case of gmii
  phy: ti: gmii-sel: fix set of copy-paste errors
  phy: core: Fix phy_get() to not return error on link creation failure
  phy: mapphone-mdm6600: Fix write timeouts with shorter GPIO toggle interval

Pull rdma fixes from Jason Gunthorpe:
 "Nothing particularly exciting, some small ODP regressions from the mmu
  notifier rework, another bunch of syzkaller fixes, and a bug fix for a
  botched syzkaller fix in the first rc pull request.

   - Fix busted syzkaller fix in 'get_new_pps' - this turned out to
     crash on certain HW configurations

   - Bug fixes for various missed things in error unwinds

   - Add a missing rcu_read_lock annotation in hfi/qib

   - Fix two ODP related regressions from the recent mmu notifier
     changes

   - Several more syzkaller bugs in siw, RDMA netlink, verbs and iwcm

   - Revert an old patch in CMA as it is now shown to not be allocating
     port numbers properly"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
  RDMA/iwcm: Fix iwcm work deallocation
  RDMA/siw: Fix failure handling during device creation
  RDMA/nldev: Fix crash when set a QP to a new counter but QPN is missing
  RDMA/odp: Ensure the mm is still alive before creating an implicit child
  RDMA/core: Fix protection fault in ib_mr_pool_destroy
  IB/mlx5: Fix implicit ODP race
  IB/hfi1, qib: Ensure RCU is locked when accessing list
  RDMA/core: Fix pkey and port assignment in get_new_pps
  RMDA/cm: Fix missing ib_cm_destroy_id() in ib_cm_insert_listen()
  RDMA/rw: Fix error flow during RDMA context initialization
  RDMA/core: Fix use of logical OR in get_new_pps
  Revert "RDMA/cma: Simplify rdma_resolve_addr() error flow"

Pull io_uring fixes from Jens Axboe:
 "Here are a few io_uring fixes that should go into this release. This
  contains:

   - Removal of (now) unused io_wq_flush() and associated flag (Pavel)

   - Fix cancelation lockup with linked timeouts (Pavel)

   - Fix for potential use-after-free when freeing percpu ref for fixed
     file sets

   - io-wq cancelation fixups (Pavel)"

* tag 'io_uring-5.6-2020-03-07' of git://git.kernel.dk/linux-block:
  io_uring: fix lockup with timeouts
  io_uring: free fixed_file_data after RCU grace period
  io-wq: remove io_wq_flush and IO_WQ_WORK_INTERNAL
  io-wq: fix IO_WQ_WORK_NO_CANCEL cancellation

Pull block fixes from Jens Axboe:
 "Here are a few fixes that should go into this release. This contains:

   - Revert of a bad bcache patch from this merge window

   - Removed unused function (Daniel)

   - Fixup for the blktrace fix from Jan from this release (Cengiz)

   - Fix of deeper level bfqq overwrite in BFQ (Carlo)"

* tag 'block-5.6-2020-03-07' of git://git.kernel.dk/linux-block:
  block, bfq: fix overwrite of bfq_group pointer in bfq_find_set_group()
  blktrace: fix dereference after null check
  Revert "bcache: ignore pending signals when creating gc and allocator thread"
  block: Remove used kblockd_schedule_work_on()

Pull media fixes from Mauro Carvalho Chehab:

 - a fix for the media controller links in both hantro driver and in
   v4l2-mem2mem core

 - some fixes for the pulse8-cec driver

 - vicodec: handle alpha channel for RGB32 formats, as it may be used

 - mc-entity.c: fix handling of pad flags

* tag 'media/v5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  media: hantro: Fix broken media controller links
  media: mc-entity.c: use & to check pad flags, not ==
  media: v4l2-mem2mem.c: fix broken links
  media: vicodec: process all 4 components for RGB32 formats
  media: pulse8-cec: close serio in disconnect, not adap_free
  media: pulse8-cec: INIT_DELAYED_WORK was called too late

There is a recipe to deadlock the kernel: submit a timeout sqe with a
linked_timeout (e.g.  test_single_link_timeout_ception() from liburing),
and SIGKILL the process.

Then, io_kill_timeouts() takes @ctx->completion_lock, but the timeout
isn't flagged with REQ_F_COMP_LOCKED, and will try to double grab it
during io_put_free() to cancel the linked timeout. Probably, the same
can happen with another io_kill_timeout() call site, that is
io_commit_cqring().
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>