- 09 Sep, 2020 34 commits
-
-
Edwin Peer authored
[ Upstream commit 12cce90b ] Firmware returns RESOURCE_ACCESS_DENIED for HWRM_TEMP_MONITORY_QUERY for VFs. This produces unpleasing error messages in the log when temp1_input is queried via the hwmon sysfs interface from a VF. The error is harmless and expected, so silence it and return unknown as the value. Since the device temperature is not particularly sensitive information, provide flexibility to change this policy in future by silencing the error rather than avoiding the HWRM call entirely for VFs. Fixes: cde49a42 ("bnxt_en: Add hwmon sysfs support to read temperature") Cc: Marc Smith <msmith626@gmail.com> Reported-by:
Marc Smith <msmith626@gmail.com> Signed-off-by:
Edwin Peer <edwin.peer@broadcom.com> Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Vasundhara Volam authored
[ Upstream commit df3875ec ] When a PCI error is detected the PCI state could be corrupt, save the PCI state after initialization and restore it after the slot reset. Fixes: 6316ea6d ("bnxt_en: Enable AER support.") Signed-off-by:
Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by:
-
Vasundhara Volam authored
[ Upstream commit dbbfa96a ] If firmware goes into unstable state, HWRM_NVM_GET_DIR_INFO firmware command may return zero dir entries. Return error in such case to avoid zero length dma buffer request. Fixes: c0c050c5 ("bnxt_en: New Broadcom ethernet driver.") Signed-off-by:
-
Pavan Chebbi authored
[ Upstream commit c1c2d774 ] In rare conditions like two stage OS installation, the ethtool's get_channels function may be called when the device is in D3 state, leading to uncorrectable PCI error. Check netif_running() first before making any query to FW which involves writing to BAR. Fixes: db4723b3 ("bnxt_en: Check max_tx_scheduler_inputs value from firmware.") Signed-off-by:
Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by:
-
Nicolas Dichtel authored
[ Upstream commit b274e47d ] During a dump, this attribute is essential, it enables the userspace to know on which interface the context is linked to. Fixes: 459aa660 ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)") Signed-off-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Tested-by:
Gabriel Ganne <gabriel.ganne@6wind.com> Signed-off-by:
-
Marek Szyprowski authored
[ Upstream commit 0661cef6 ] Move the burst len fixup after setting the generic value for it. This finally enables the fixup introduced by commit 137bd110 ("dmaengine: pl330: Align DMA memcpy operations to MFIFO width"), which otherwise was overwritten by the generic value. Reported-by:
kernel test robot <lkp@intel.com> Fixes: 137bd110 ("dmaengine: pl330: Align DMA memcpy operations to MFIFO width") Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Link: https://lore.kernel.org/r/20200825064617.16193-1-m.szyprowski@samsung.comSigned-off-by:
Vinod Koul <vkoul@kernel.org> Signed-off-by:
-
Dinghao Liu authored
[ Upstream commit e2d79cd8 ] When devm_gpiod_get_optional() fails, bus should be freed just like when of_mdiobus_register() fails. Fixes: 1bddd96c ("net: arc_emac: support the phy reset for emac driver") Signed-off-by:
Dinghao Liu <dinghao.liu@zju.edu.cn> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Yuusuke Ashizuka authored
[ Upstream commit 1838d6c6 ] When this driver is built as a module, I cannot rmmod it after insmoding it. This is because that this driver calls ravb_mdio_init() at the time of probe, and module->refcnt is incremented by alloc_mdio_bitbang() called after that. Therefore, even if ifup is not performed, the driver is in use and rmmod cannot be performed. $ lsmod Module Size Used by ravb 40960 1 $ rmmod ravb rmmod: ERROR: Module ravb is in use Call ravb_mdio_init() at open and free_mdio_bitbang() at close, thereby rmmod is possible in the ifdown state. Fixes: c156633f ("Renesas Ethernet AVB driver proper") Signed-off-by:
Yuusuke Ashizuka <ashiduka@fujitsu.com> Reviewed-by:
Sergei Shtylyov <sergei.shtylyov@gmail.com> Signed-off-by:
-
Dinghao Liu authored
[ Upstream commit 7ef1fc57 ] When devm_kcalloc() fails, dev should be freed just like what we've done in the subsequent error paths. Fixes: 7b78be48 ("net: systemport: Dynamically allocate number of TX rings") Signed-off-by:
-
Dinghao Liu authored
[ Upstream commit 100e3345 ] hns_nic_dev_probe allocates ndev, but not free it on two error handling paths, which may lead to memleak. Fixes: 63434888 ("net: hns: net: hns: enet adds support of acpi") Signed-off-by:
-
Florian Westphal authored
[ Upstream commit 1e105e6a ] Following bug was reported via irc: nft list ruleset set knock_candidates_ipv4 { type ipv4_addr . inet_service size 65535 elements = { 127.0.0.1 . 123, 127.0.0.1 . 123 } } .. udp dport 123 add @knock_candidates_ipv4 { ip saddr . 123 } udp dport 123 add @knock_candidates_ipv4 { ip saddr . udp dport } It should not have been possible to add a duplicate set entry. After some debugging it turned out that the problem is the immediate value (123) in the second-to-last rule. Concatenations use 32bit registers, i.e. the elements are 8 bytes each, not 6 and it turns out the kernel inserted inet firewall @knock_candidates_ipv4 element 0100007f ffff7b00 : 0 [end] element 0100007f 00007b00 : 0 [end] Note the non-zero upper bits of the first element. It turns out that nft_immediate doesn't zero the destination register, but this is needed when the length isn't a multiple of 4. Furthermore, the zeroing in nft_payload is broken. We can't use [len / 4] = 0 -- if len is a multiple of 4, index is off by one. Skip zeroing in this case and use a conditional instead of (len -1) / 4. Fixes: 49499c3e ("netfilter: nf_tables: switch registers to 32 bit addressing") Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Pablo Neira Ayuso authored
[ Upstream commit da9125df ] This should be NFTA_LIST_UNSPEC instead of NFTA_LIST_UNPEC, all other similar attribute definitions are postfixed with _UNSPEC. Fixes: 96518518 ("netfilter: add nftables") Signed-off-by:
-
Pablo Neira Ayuso authored
[ Upstream commit 6f03bf43 ] Kernel sends an empty NFTA_SET_USERDATA attribute with no value if userspace adds a set with no NFTA_SET_USERDATA attribute. Fixes: e6d8ecac ("netfilter: nf_tables: Add new attributes into nft_set to store user data.") Signed-off-by:
-
Florian Fainelli authored
[ Upstream commit e14f633b ] The initialization done by bmips_cpu_setup() typically affects both threads of a given core, on 7435 which supports 2 cores and 2 threads, logical CPU number 2 and 3 would not run this initialization. Fixes: 738a3f79 ("MIPS: BMIPS: Add early CPU initialization code") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by:
-
Florian Fainelli authored
[ Upstream commit dbfc95f9 ] When the BMIPS generic cpu-feature-overrides.h file was introduced, cpu_has_inclusive_caches/MIPS_CPU_INCLUSIVE_CACHES was not set for BMIPS5000 CPUs. Correct this when we have initialized the MIPS secondary cache successfully. Fixes: f337967d ("MIPS: BMIPS: Add cpu-feature-overrides.h") Signed-off-by:
-
Yu Kuai authored
[ Upstream commit 0cef8e2c ] The reurn value of of_find_device_by_node() is not checked, thus null pointer dereference will be triggered if of_find_device_by_node() failed. Fixes: bbe89c8e ("at_hdmac: move to generic DMA binding") Signed-off-by:
Yu Kuai <yukuai3@huawei.com> Link: https://lore.kernel.org/r/20200817115728.1706719-2-yukuai3@huawei.comSigned-off-by:
-
Jussi Kivilinna authored
[ Upstream commit 279e89b2 ] batadv_bla_send_claim() gets called from worker thread context through batadv_bla_periodic_work(), thus netif_rx_ni needs to be used in that case. This fixes "NOHZ: local_softirq_pending 08" log messages seen when batman-adv is enabled. Fixes: 23721387 ("batman-adv: add basic bridge loop avoidance code") Signed-off-by:
Jussi Kivilinna <jussi.kivilinna@haltian.com> Signed-off-by:
Sven Eckelmann <sven@narfation.org> Signed-off-by:
Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by:
-
Linus Lüssing authored
[ Upstream commit d8bf0c01 ] The own OGM check is currently misplaced and can lead to the following issues: For one thing we might receive an aggregated OGM from a neighbor node which has our own OGM in the first place. We would then not only skip our own OGM but erroneously also any other, following OGM in the aggregate. For another, we might receive an OGM aggregate which has our own OGM in a place other then the first one. Then we would wrongly not skip this OGM, leading to populating the orginator and gateway table with ourself. Fixes: 9323158e ("batman-adv: OGMv2 - implement originators logic") Signed-off-by:
Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by:
-
Sven Eckelmann authored
[ Upstream commit 303216e7 ] The gateway client code can try to optimize the delivery of DHCP packets to avoid broadcasting them through the whole mesh. But also transmissions to the client can be optimized by looking up the destination via the chaddr of the DHCP packet. But the chaddr is currently only done when chaddr is fully inside the non-paged area of the skbuff. Otherwise it will not be initialized and the unoptimized path should have been taken. But the implementation didn't handle this correctly. It didn't retrieve the correct chaddr but still tried to perform the TT lookup with this uninitialized memory. Reported-by: syzbot+ab16e463b903f5a37036@syzkaller.appspotmail.com Fixes: 6c413b1c ("batman-adv: send every DHCP packet as bat-unicast") Signed-off-by:
Antonio Quartulli <a@unstable.cc> Signed-off-by:
-
Peter Ujfalusi authored
[ Upstream commit 5b2aa9f9 ] of_dma_xlate callback can return ERR_PTR as well NULL in case of failure. If error code is returned (not NULL) then the route should be released and the router should not be registered for the channel. Fixes: 56f13c0d ("dmaengine: of_dma: Support for DMA routers") Signed-off-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20200806104928.25975-1-peter.ujfalusi@ti.comSigned-off-by:
-
Simon Leiner authored
[ Upstream commit d742db70 ] On some architectures (like ARM), virt_to_gfn cannot be used for vmalloc'd memory because of its reliance on virt_to_phys. This patch introduces a check for vmalloc'd addresses and obtains the PFN using vmalloc_to_pfn in that case. Signed-off-by:
Simon Leiner <simon@leiner.me> Reviewed-by:
Stefano Stabellini <sstabellini@kernel.org> Link: https://lore.kernel.org/r/20200825093153.35500-1-simon@leiner.meSigned-off-by:
Juergen Gross <jgross@suse.com> Signed-off-by:
-
Sven Schnelle authored
[ Upstream commit 1196f12a ] Since commit a21ee605 ("lockdep: Change hardirq{s_enabled,_context} to per-cpu variables") the lockdep code itself uses percpu variables. This leads to recursions because the percpu macros are calling preempt_enable() which might call trace_preempt_on(). Signed-off-by:
Sven Schnelle <svens@linux.ibm.com> Reviewed-by:
Vasily Gorbik <gor@linux.ibm.com> Signed-off-by:
-
Peter Zijlstra authored
[ Upstream commit 49d9c593 ] Match the pattern elsewhere in this file. Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Reviewed-by:
Thomas Gleixner <tglx@linutronix.de> Acked-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by:
Marco Elver <elver@google.com> Link: https://lkml.kernel.org/r/20200821085348.251340558@infradead.orgSigned-off-by:
-
Jeff Layton authored
[ Upstream commit 496ceaf1 ] Leases don't currently work correctly on kcephfs, as they are not broken when caps are revoked. They could eventually be implemented similarly to how we did them in libcephfs, but for now don't allow them. [ idryomov: no need for simple_nosetlease() in ceph_dir_fops and ceph_snapdir_fops ] Signed-off-by:
Jeff Layton <jlayton@kernel.org> Reviewed-by:
Ilya Dryomov <idryomov@gmail.com> Signed-off-by:
-
Dmitry Baryshkov authored
[ Upstream commit f5749d61 ] New Qualcomm firmware has changed a way it reports back the 'started' event. Support new register values. Signed-off-by:
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by:
Rob Clark <robdclark@chromium.org> Signed-off-by:
-
Amit Engel authored
[ Upstream commit 0d3b6a8d ] Based on nvme spec, when keep alive timeout is set to zero the keep-alive timer should be disabled. Signed-off-by:
Amit Engel <amit.engel@dell.com> Signed-off-by:
Sagi Grimberg <sagi@grimberg.me> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Tom Rix authored
[ Upstream commit cecf7560 ] clang static analysis reports this representative problem applesmc.c:758:10: warning: 1st function call argument is an uninitialized value left = be16_to_cpu(*(__be16 *)(buffer + 6)) >> 2; ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ buffer is filled by the earlier call ret = applesmc_read_key(LIGHT_SENSOR_LEFT_KEY, ... This problem is reported because a goto skips the status check. Other similar problems use data from applesmc_read_key before checking the status. So move the checks to before the use. Signed-off-by:
Tom Rix <trix@redhat.com> Reviewed-by:
Henrik Rydberg <rydberg@bitmath.org> Link: https://lore.kernel.org/r/20200820131932.10590-1-trix@redhat.comSigned-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Krishna Manikandan authored
[ Upstream commit 9d5cbf5f ] Define shutdown callback for display drm driver, so as to disable all the CRTCS when shutdown notification is received by the driver. This change will turn off the timing engine so that no display transactions are requested while mmu translations are getting disabled during reboot sequence. Signed-off-by:
Krishna Manikandan <mkrishn@codeaurora.org> Changes in v2: - Remove NULL check from msm_pdev_shutdown (Stephen Boyd) - Change commit text to reflect when this issue was uncovered (Sai Prakash Ranjan) Signed-off-by:
-
John Stultz authored
[ Upstream commit 975efc66 ] When booting with heavily modularized config, the serial console may not be able to load until after init when modules that satisfy needed dependencies have time to load. Unfortunately, as qcom_geni_console_setup is marked as __init, the function may have been freed before we get to run it, causing boot time crashes such as: [ 6.469057] Unable to handle kernel paging request at virtual address ffffffe645d4e6cc [ 6.481623] Mem abort info: [ 6.484466] ESR = 0x86000007 [ 6.487557] EC = 0x21: IABT (current EL), IL = 32 bits [ 6.492929] SET = 0, FnV = 0g [ 6.496016] EA = 0, S1PTW = 0 [ 6.499202] swapper pgtable: 4k pages, 39-bit VAs, pgdp=000000008151e000 [ 6.501286] ufshcd-qcom 1d84000.ufshc: ufshcd_print_pwr_info:[RX, TX]: gear=[3, 3], lane[2, 2], pwr[FAST MODE, FAST MODE], rate = 2 [ 6.505977] [ffffffe645d4e6cc] pgd=000000017df9f003, p4d=000000017df9f003, pud=000000017df9f003, pmd=000000017df9c003, pte=0000000000000000 [ 6.505990] Internal error: Oops: 86000007 [#1] PREEMPT SMP [ 6.505995] Modules linked in: zl10353 zl10039 zl10036 zd1301_demod xc5000 xc4000 ves1x93 ves1820 tuner_xc2028 tuner_simple tuner_types tua9001 tua6100 1 [ 6.506152] isl6405 [ 6.518104] ufshcd-qcom 1d84000.ufshc: ufshcd_find_max_sup_active_icc_level: Regulator capability was not set, actvIccLevel=0 [ 6.530549] horus3a helene fc2580 fc0013 fc0012 fc0011 ec100 e4000 dvb_pll ds3000 drxk drxd drx39xyj dib9000 dib8000 dib7000p dib7000m dib3000mc dibx003 [ 6.624271] CPU: 7 PID: 148 Comm: kworker/7:2 Tainted: G W 5.8.0-mainline-12021-g6defd37ba1cd #3455 [ 6.624273] Hardware name: Thundercomm Dragonboard 845c (DT) [ 6.624290] Workqueue: events deferred_probe_work_func [ 6.624296] pstate: 40c00005 (nZcv daif +PAN +UAO BTYPE=--) [ 6.624307] pc : qcom_geni_console_setup+0x0/0x110 [ 6.624316] lr : try_enable_new_console+0xa0/0x140 [ 6.624318] sp : ffffffc010843a30 [ 6.624320] x29: ffffffc010843a30 x28: ffffffe645c3e7d0 [ 6.624325] x27: ffffff80f8022180 x26: ffffffc010843b28 [ 6.637937] x25: 0000000000000000 x24: ffffffe6462a2000 [ 6.637941] x23: ffffffe646398000 x22: 0000000000000000 [ 6.637945] x21: 0000000000000000 x20: ffffffe6462a5ce8 [ 6.637952] x19: ffffffe646398e38 x18: ffffffffffffffff [ 6.680296] x17: 0000000000000000 x16: ffffffe64492b900 [ 6.680300] x15: ffffffe6461e9d08 x14: 69202930203d2064 [ 6.680305] x13: 7561625f65736162 x12: 202c363331203d20 [ 6.696434] x11: 0000000000000030 x10: 0101010101010101 [ 6.696438] x9 : 4d4d20746120304d x8 : 7f7f7f7f7f7f7f7f [ 6.707249] x7 : feff4c524c787373 x6 : 0000000000008080 [ 6.707253] x5 : 0000000000000000 x4 : 8080000000000000 [ 6.707257] x3 : 0000000000000000 x2 : ffffffe645d4e6cc [ 6.744223] qcom_geni_serial 898000.serial: dev_pm_opp_set_rate: failed to find OPP for freq 102400000 (-34) [ 6.744966] x1 : fffffffefe74e174 x0 : ffffffe6462a5ce8 [ 6.753580] qcom_geni_serial 898000.serial: dev_pm_opp_set_rate: failed to find OPP for freq 102400000 (-34) [ 6.761634] Call trace: [ 6.761639] qcom_geni_console_setup+0x0/0x110 [ 6.761645] register_console+0x29c/0x2f8 [ 6.767981] Bluetooth: hci0: Frame reassembly failed (-84) [ 6.775252] uart_add_one_port+0x438/0x500 [ 6.775258] qcom_geni_serial_probe+0x2c4/0x4a8 [ 6.775266] platform_drv_probe+0x58/0xa8 [ 6.855359] really_probe+0xec/0x398 [ 6.855362] driver_probe_device+0x5c/0xb8 [ 6.855367] __device_attach_driver+0x98/0xb8 [ 7.184945] bus_for_each_drv+0x74/0xd8 [ 7.188825] __device_attach+0xec/0x148 [ 7.192705] device_initial_probe+0x24/0x30 [ 7.196937] bus_probe_device+0x9c/0xa8 [ 7.200816] deferred_probe_work_func+0x7c/0xb8 [ 7.205398] process_one_work+0x20c/0x4b0 [ 7.209456] worker_thread+0x48/0x460 [ 7.213157] kthread+0x14c/0x158 [ 7.216432] ret_from_fork+0x10/0x18 [ 7.220049] Code: bad PC value [ 7.223139] ---[ end trace 73f3b21e251d5a70 ]--- Thus this patch removes the __init avoiding crash in such configs. Cc: Andy Gross <agross@kernel.org> Cc: Jiri Slaby <jirislaby@kernel.org> Cc: Saravana Kannan <saravanak@google.com> Cc: Todd Kjos <tkjos@google.com> Cc: Amit Pundir <amit.pundir@linaro.org> Cc: linux-arm-msm@vger.kernel.org Cc: linux-serial@vger.kernel.org Suggested-by:
Saravana Kannan <saravanak@google.com> Signed-off-by:
John Stultz <john.stultz@linaro.org> Reviewed-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20200811025044.70626-1-john.stultz@linaro.orgSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Bodo Stroesser authored
commit 3c58f737 upstream. (scatter|gather)_data_area() need to flush dcache after writing data to or before reading data from a page in uio data area. The two routines are able to handle data transfer to/from such a page in fragments and flush the cache after each fragment was copied by calling the wrapper tcmu_flush_dcache_range(). That means: 1) flush_dcache_page() can be called multiple times for the same page. 2) Calling flush_dcache_page() indirectly using the wrapper does not make sense, because each call of the wrapper is for one single page only and the calling routine already has the correct page pointer. Change (scatter|gather)_data_area() such that, instead of calling tcmu_flush_dcache_range() before/after each memcpy, it now calls flush_dcache_page() before unmapping a page (when writing is complete for that page) or after mapping a page (when starting to read the page). After this change only calls to tcmu_flush_dcache_range() for addresses in vmalloc'ed command ring are left over. The patch was tested on ARM with kernel 4.19.118 and 5.7.2 Link: https://lore.kernel.org/r/20200618131632.32748-2-bstroesser@ts.fujitsu.comTested-by:
JiangYu <lnsyyj@hotmail.com> Tested-by:
Daniel Meyerholt <dxm523@gmail.com> Acked-by:
Mike Christie <michael.christie@oracle.com> Signed-off-by:
Bodo Stroesser <bstroesser@ts.fujitsu.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Bodo Stroesser authored
commit 8c4e0f21 upstream. 1) If remaining ring space before the end of the ring is smaller then the next cmd to write, tcmu writes a padding entry which fills the remaining space at the end of the ring. Then tcmu calls tcmu_flush_dcache_range() with the size of struct tcmu_cmd_entry as data length to flush. If the space filled by the padding was smaller then tcmu_cmd_entry, tcmu_flush_dcache_range() is called for an address range reaching behind the end of the vmalloc'ed ring. tcmu_flush_dcache_range() in a loop calls flush_dcache_page(virt_to_page(start)); for every page being part of the range. On x86 the line is optimized out by the compiler, as flush_dcache_page() is empty on x86. But I assume the above can cause trouble on other architectures that really have a flush_dcache_page(). For paddings only the header part of an entry is relevant due to alignment rules the header always fits in the remaining space, if padding is needed. So tcmu_flush_dcache_range() can safely be called with sizeof(entry->hdr) as the length here. 2) After it has written a command to cmd ring, tcmu calls tcmu_flush_dcache_range() using the size of a struct tcmu_cmd_entry as data length to flush. But if a command needs many iovecs, the real size of the command may be bigger then tcmu_cmd_entry, so a part of the written command is not flushed then. Link: https://lore.kernel.org/r/20200528193108.9085-1-bstroesser@ts.fujitsu.comAcked-by:
-
Kim Phillips authored
commit e48a73a3 upstream. Event modifiers are not mentioned in the perf record or perf stat manpages. Add them to orient new users more effectively by pointing them to the perf list manpage for details. Fixes: 2055fdaf ("perf list: Document precise event sampling for AMD IBS") Signed-off-by:
Kim Phillips <kim.phillips@amd.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Clarke <pc@us.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tony Jones <tonyj@suse.de> Cc: stable@vger.kernel.org Link: http://lore.kernel.org/lkml/20200901215853.276234-1-kim.phillips@amd.comSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Marc Zyngier authored
commit 35556bed upstream. When calling into hid_map_usage(), the passed event code is blindly stored as is, even if it doesn't fit in the associated bitmap. This event code can come from a variety of sources, including devices masquerading as input devices, only a bit more "programmable". Instead of taking the event code at face value, check that it actually fits the corresponding bitmap, and if it doesn't: - spit out a warning so that we know which device is acting up - NULLify the bitmap pointer so that we catch unexpected uses Code paths that can make use of untrusted inputs can now check that the mapping was indeed correct and bail out if not. Cc: stable@vger.kernel.org Signed-off-by:
Marc Zyngier <maz@kernel.org> Signed-off-by:
Benjamin Tissoires <benjamin.tissoires@gmail.com> Signed-off-by:
-
Marc Zyngier authored
commit bce1305c upstream. It appears that a ReportSize value of zero is legal, even if a bit non-sensical. Most of the HID code seems to handle that gracefully, except when computing the total size in bytes. When fed as input to memset, this leads to some funky outcomes. Detect the corner case and correctly compute the size. Cc: stable@vger.kernel.org Signed-off-by:
-
- 03 Sep, 2020 6 commits
-
-
Greg Kroah-Hartman authored
Tested-by:
Shuah Khan <skhan@linuxfoundation.org> Tested-by:
Linux Kernel Functional Testing <lkft@linaro.org> Tested-by:
-
Hector Martin authored
commit 74a2a7de upstream. As the recent fix addressed the channel swap problem more properly, update the comment as well. Fixes: 1b7ecc24 ("ALSA: usb-audio: work around streaming quirk for MacroSilicon MS2109") Signed-off-by:
Hector Martin <marcan@marcan.st> Link: https://lore.kernel.org/r/20200816084431.102151-1-marcan@marcan.stSigned-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Peilin Ye authored
commit 25a097f5 upstream. `uref->usage_index` is not always being properly checked, causing hiddev_ioctl_usage() to go out of bounds under some cases. Fix it. Reported-by: syzbot+34ee1b45d88571c2fa8b@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?id=f2aebe90b8c56806b050a20b36f51ed6acabe802Reviewed-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Peilin Ye <yepeilin.cs@gmail.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Jarkko Sakkinen authored
[ Upstream commit 6c4e79d9 ] The size of the buffers for storing context's and sessions can vary from arch to arch as PAGE_SIZE can be anything between 4 kB and 256 kB (the maximum for PPC64). Define a fixed buffer size set to 16 kB. This should be enough for most use with three handles (that is how many we allow at the moment). Parametrize the buffer size while doing this, so that it is easier to revisit this later on if required. Cc: stable@vger.kernel.org Reported-by:
Stefan Berger <stefanb@linux.ibm.com> Fixes: 745b361e ("tpm: infrastructure for TPM spaces") Reviewed-by:
Jerry Snitselaar <jsnitsel@redhat.com> Tested-by:
Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by:
-
Thinh Nguyen authored
[ Upstream commit bc9a2e22 ] Currently dwc3 doesn't handle usb_request->zero for SG requests. This change checks and prepares extra TRBs for the ZLP for SG requests. Cc: <stable@vger.kernel.org> # v4.5+ Fixes: 04c03d10 ("usb: dwc3: gadget: handle request->zero") Signed-off-by:
Thinh Nguyen <thinhn@synopsys.com> Signed-off-by:
Felipe Balbi <balbi@kernel.org> Signed-off-by:
-
Thinh Nguyen authored
[ Upstream commit d2ee3ff7 ] The usb_request->zero doesn't apply for isoc. Also, if we prepare a 0-length (ZLP) TRB for the OUT direction, we need to prepare an extra TRB to pad up to the MPS alignment. Use the same bounce buffer for the ZLP TRB and the extra pad TRB. Cc: <stable@vger.kernel.org> # v4.5+ Fixes: d6e5a549 ("usb: dwc3: simplify ZLP handling") Fixes: 04c03d10 ("usb: dwc3: gadget: handle request->zero") Signed-off-by:
-
