This patch makes the Datafab and the Freecom driver both use the I/O safe
buffer us->iobuf instead of local stack or local allocations.

This patch makes the 2.5 initializers use the DMA-safe us->iobuf instead of
local stack or local dynamic allocation.

A couple of patches for the ftdi_sio driver on 2.5.73

"2.5.73-ftdi_sio-bigupdate.patch" - this is a big, ugly patch to
bring the ftdi_sio driver in line with what recently submitted for
inclusion in the 2.4.x kernel
(v2.4/testing/cset/cset-abbotti@mev.co.uk|ChangeSet|20030627190202|35624.txt),
but with necessary changes for 2.5.x.  I've bumped the driver's
version number to 1.4.0 to distinguish it from that submitted for
the 2.4.x kernel.

"2.5.73-ftdi_sio-dynamicwrite.patch" - this adds to the above patch
to replace the pool of urbs used for writes with dynamically
allocated urbs and transfer buffers.  I've tested this on the
FT8U232AM and FT232BM and I think I've catered for the older "SIO"
device, but I don't have a device to test that.  Also, it is not
safe to unload the driver module while write urbs are in flight
(same as for the Visor driver).

Here is the blind flight :-)
===
drivers/usb/class/usblp.c
usblp->dev was set to NULL to indicate a device disconnect but we need
this value for usb_buffer_free() when device is still opened and cleanup
is delayed until usblp_release().
We have a usblp->present now for preventing device read, write, open and ioctl.

into home.osdl.org:/home/torvalds/v2.5/linux

confusion in the future over which constants apply to which initializers.

SGI Modid: 2.5.x-xfs:slinx:152354a

into home.osdl.org:/home/torvalds/v2.5/linux

into tetrachloride.(none):/mnt/raid/src/kernel/2.5/cpufreq

- CPUFREQ_ALL_CPUS is not a valid argument any more, don't mention it
  in include/linux/cpufreq.h
- without a driver->init() function a cpufreq driver isn't even
  loaded, so remove that check in the per-CPU initialization
- whitespace and clarification changes to linux/cpufreq.

All from Dominik again..

More from Dominik

From Dominik.

Wait with the destruction of cpufreq objects until all references
are gone (code partly based on rmk's comparable patch for the PCMCIA
subsystem.

From Dominik.

into home.osdl.org:/home/torvalds/v2.5/linux

into tetrachloride.(none):/mnt/raid/src/kernel/2.5/agpgart

into home.osdl.org:/home/torvalds/v2.5/linux

into nuts.ninka.net:/home/davem/src/BK/net-2.5

    
This patch fixes BUG when pushing IPv6 destination options over an
IPv6 raw socket.  Patch is based on one from Thomas Graf <tgr@reeler.org>.

And spell it correctly :-)

into home.osdl.org:/home/torvalds/v2.5/linux

into home.osdl.org:/home/torvalds/v2.5/linux

 - export the __div64_32 symbol for modules;

 - add likely() to the fast path (divisor>>32 == 0);

 - add __attribute__((pure)) to __div64_32() prototype so
   the compiler knows global memory isn't clobbered;

 - avoid building __div64_32() on 64bit architectures.

* whitespace cleanup
* removal of unused members of netdev priv struct
* extendable arrangement of h/w reset logic

* Perf cleanup: s/int/unsigned int/ for descriptor ring indexes
  [suggestion by Jeff Garzik].
* Perf cleanup: cache references to ring elements using local pointer

* h/w workaround: several 10's of thousands of 82547 controllers where
  mis-fused during manufacturing, resulting in PHY Tx amplitude to be
  too high and out of spec.  This workaround detects those parts, and
  compensates the Tx amplitude by subtracting ~80mV.

* Cleanup: ethtool diags: only reset if not if_running.

* Bug fix: alloc_etherdev failure didn't cleanup regions in probe.

* Bug fix: missing Tx cleanup opportunities during interrupt handling.

* Bug fix: fix VLAN support on PPC64 [Mark Rakes (mrakes@vivato.net)]

* Bug fix: request_irq() failure resulted in freeing resources twice!
  [Don Fry (brazilnut@us.ibm.com)]

This patch addresses a minor regression reported by Rhine-I users (leading
to occasional Tx timeouts).

I also merged some cosmetic changes.

This patch finally adds policy expiration.

Note that it resends soft policy expire messages every 30 seconds.  This
is needed as when "soft use expire" is used for dead peer detection,
a lost message could lead to a dead peer that isn't discovered until the
SAs expire.

I've only implemented notification for XFRM as I didn't want to just add
another PFKEY extension in case it collides with something else.  Of
course it could be easily done for PFKEY with an extension too.