When vxlan interface is deleted, all fdbs are deleted by vxlan_flush().
vxlan_flush() flushes fdbs but it doesn't delete fdb, which contains
all-zeros-mac because it is deleted by vxlan_uninit().
But vxlan_uninit() deletes only the fdb, which contains both all-zeros-mac
and default vni.
So, the fdb, which contains both all-zeros-mac and non-default vni
will not be deleted.

Test commands:
    ip link add vxlan0 type vxlan dstport 4789 external
    ip link set vxlan0 up
    bridge fdb add to 00:00:00:00:00:00 dst 172.0.0.1 dev vxlan0 via lo \
	    src_vni 10000 self permanent
    ip link del vxlan0

kmemleak reports as follows:
unreferenced object 0xffff9486b25ced88 (size 96):
  comm "bridge", pid 2151, jiffies 4294701712 (age 35506.901s)
  hex dump (first 32 bytes):
    02 00 00 00 ac 00 00 01 40 00 09 b1 86 94 ff ff  ........@.......
    46 02 00 00 00 00 00 00 a7 03 00 00 12 b5 6a 6b  F.............jk
  backtrace:
    [<00000000c10cf651>] vxlan_fdb_append.part.51+0x3c/0xf0 [vxlan]
    [<000000006b31a8d9>] vxlan_fdb_create+0x184/0x1a0 [vxlan]
    [<0000000049399045>] vxlan_fdb_update+0x12f/0x220 [vxlan]
    [<0000000090b1ef00>] vxlan_fdb_add+0x12a/0x1b0 [vxlan]
    [<0000000056633c2c>] rtnl_fdb_add+0x187/0x270
    [<00000000dd5dfb6b>] rtnetlink_rcv_msg+0x264/0x490
    [<00000000fc44dd54>] netlink_rcv_skb+0x4a/0x110
    [<00000000dff433e7>] netlink_unicast+0x18e/0x250
    [<00000000b87fb421>] netlink_sendmsg+0x2e9/0x400
    [<000000002ed55153>] ____sys_sendmsg+0x237/0x260
    [<00000000faa51c66>] ___sys_sendmsg+0x88/0xd0
    [<000000006c3982f1>] __sys_sendmsg+0x4e/0x80
    [<00000000a8f875d2>] do_syscall_64+0x56/0xe0
    [<000000003610eefa>] entry_SYSCALL_64_after_hwframe+0x44/0xa9
unreferenced object 0xffff9486b1c40080 (size 128):
  comm "bridge", pid 2157, jiffies 4294701754 (age 35506.866s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 f8 dc 42 b2 86 94 ff ff  ..........B.....
    6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b  kkkkkkkkkkkkkkkk
  backtrace:
    [<00000000a2981b60>] vxlan_fdb_create+0x67/0x1a0 [vxlan]
    [<0000000049399045>] vxlan_fdb_update+0x12f/0x220 [vxlan]
    [<0000000090b1ef00>] vxlan_fdb_add+0x12a/0x1b0 [vxlan]
    [<0000000056633c2c>] rtnl_fdb_add+0x187/0x270
    [<00000000dd5dfb6b>] rtnetlink_rcv_msg+0x264/0x490
    [<00000000fc44dd54>] netlink_rcv_skb+0x4a/0x110
    [<00000000dff433e7>] netlink_unicast+0x18e/0x250
    [<00000000b87fb421>] netlink_sendmsg+0x2e9/0x400
    [<000000002ed55153>] ____sys_sendmsg+0x237/0x260
    [<00000000faa51c66>] ___sys_sendmsg+0x88/0xd0
    [<000000006c3982f1>] __sys_sendmsg+0x4e/0x80
    [<00000000a8f875d2>] do_syscall_64+0x56/0xe0
    [<000000003610eefa>] entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fixes: 3ad7a4b1 ("vxlan: support fdb and learning in COLLECT_METADATA mode")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Daniel Borkmann says:

====================
pull-request: bpf 2020-07-31

The following pull-request contains BPF updates for your *net* tree.

We've added 5 non-merge commits during the last 21 day(s) which contain
a total of 5 files changed, 126 insertions(+), 18 deletions(-).

The main changes are:

1) Fix a map element leak in HASH_OF_MAPS map type, from Andrii Nakryiko.

2) Fix a NULL pointer dereference in __btf_resolve_helper_id() when no
   btf_vmlinux is available, from Peilin Ye.

3) Init pos variable in __bpfilter_process_sockopt(), from Christoph Hellwig.

4) Fix a cgroup sockopt verifier test by specifying expected attach type,
   from Jean-Philippe Brucker.

Note that when net gets merged into net-next later on, there is a small
merge conflict in kernel/bpf/btf.c between commit 5b801dfb ("bpf: Fix
NULL pointer dereference in __btf_resolve_helper_id()") from the bpf tree
and commit 138b9a05 ("bpf: Remove btf_id helpers resolving") from the
net-next tree.

Resolve as follows: remove the old hunk with the __btf_resolve_helper_id()
function. Change the btf_resolve_helper_id() so it actually tests for a
NULL btf_vmlinux and bails out:

int btf_resolve_helper_id(struct bpf_verifier_log *log,
                          const struct bpf_func_proto *fn, int arg)
{
        int id;

        if (fn->arg_type[arg] != ARG_PTR_TO_BTF_ID || !btf_vmlinux)
                return -EINVAL;
        id = fn->btf_id[arg];
        if (!id || id > btf_vmlinux->nr_types)
                return -EINVAL;
        return id;
}

Let me know if you run into any others issues (CC'ing Jiri Olsa so he's in
the loop with regards to merge conflict resolution).
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Steffen Klassert says:

====================
pull request (net): ipsec 2020-07-31

1) Fix policy matching with mark and mask on userspace interfaces.
   From Xin Long.

2) Several fixes for the new ESP in TCP encapsulation.
   From Sabrina Dubroca.

3) Fix crash when the hold queue is used. The assumption that
   xdst->path and dst->child are not a NULL pointer only if dst->xfrm
   is not a NULL pointer is true with the exception of using the
   hold queue. Fix this by checking for hold queue usage before
   dereferencing xdst->path or dst->child.

4) Validate pfkey_dump parameter before sending them.
   From Mark Salyzyn.

5) Fix the location of the transport header with ESP in UDPv6
   encapsulation. From Sabrina Dubroca.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Saeed Mahameed says:

====================
Mellanox, mlx5 fixes 2020-07-30

This small patchset introduces some fixes to mlx5 driver.

Please pull and let me know if there is any problem.

For -stable v4.18:
 ('net/mlx5e: fix bpf_prog reference count leaks in mlx5e_alloc_rq')

For -stable v5.7:
 ('net/mlx5e: E-Switch, Add misc bit when misc fields changed for mirroring')
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

rds_notify_queue_get() is potentially copying uninitialized kernel stack
memory to userspace since the compiler may leave a 4-byte hole at the end
of `cmsg`.

In 2016 we tried to fix this issue by doing `= { 0 };` on `cmsg`, which
unfortunately does not always initialize that 4-byte hole. Fix it by using
memset() instead.

Cc: stable@vger.kernel.org
Fixes: f037590f ("rds: fix a leak of kernel memory")
Fixes: bdbe6fbc ("RDS: recv.c")
Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Peilin Ye <yepeilin.cs@gmail.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2020-07-30

This series contains updates to the e1000e and igb drivers.

Aaron Ma allows PHY initialization to continue if ULP disable failed for
e1000e.

Francesco Ruggeri fixes race conditions in igb reset that could cause panics.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Exchange the positions of the err_tbl_init and err_register labels in
ct_init_module function.

Fixes: c34b961a ("net/sched: act_ct: Create nf flow table per zone")
Signed-off-by: liujian <liujian56@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The function invokes bpf_prog_inc(), which increases the reference
count of a bpf_prog object "rq->xdp_prog" if the object isn't NULL.

The refcount leak issues take place in two error handling paths. When
either mlx5_wq_ll_create() or mlx5_wq_cyc_create() fails, the function
simply returns the error code and forgets to drop the reference count
increased earlier, causing a reference count leak of "rq->xdp_prog".

Fix this issue by jumping to the error handling path err_rq_wq_destroy
while either function fails.

Fixes: 422d4c40 ("net/mlx5e: RX, Split WQ objects for different RQ types")
Signed-off-by: Xin Xiong <xiongx18@fudan.edu.cn>
Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

The flow_source must be specified, even for rule without matching
source vport, because some actions are only allowed in uplink.
Otherwise, rule can't be offloaded and firmware syndrome happens.

Fixes: 6fb0701a ("net/mlx5: E-Switch, Add support for offloading rules with no in_port")
Signed-off-by: Jianbo Liu <jianbol@mellanox.com>
Reviewed-by: Chris Mi <chrism@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

The modified flow_context fields in FTE must be indicated in
modify_enable bitmask. Previously, the misc bit in modify_enable is
always set as source vport must be set for each rule. So, when parsing
vxlan/gre/geneve/qinq rules, this bit is not set because those are all
from the same misc fileds that source vport fields are located at, and
we don't need to set the indicator twice.

After adding per vport tables for mirroring, misc bit is not set, then
firmware syndrome happens. To fix it, set the bit wherever misc fileds
are changed. This also makes it unnecessary to check misc fields and set
the misc bit accordingly in metadata matching, so here remove it.

Besides, flow_source must be specified for uplink because firmware
will check it and some actions are only allowed for packets received
from uplink.

Fixes: 96e32687 ("net/mlx5e: Eswitch, Use per vport tables for mirroring")
Signed-off-by: Jianbo Liu <jianbol@mellanox.com>
Reviewed-by: Chris Mi <chrism@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Currently the driver restores only IPv4 tunnel headers.
Add support for restoring IPv6 tunnel header.

Fixes: b8ce9037 ("net/mlx5e: Restore tunnel metadata on miss")
Signed-off-by: Jianbo Liu <jianbol@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Oz Shlomo <ozsh@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Merge tag 'mac80211-for-davem-2020-07-30' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211

Johannes Berg says:

====================
A couple of more changes:
 * remove a warning that can trigger in certain races
 * check a function pointer before using it
 * check before adding 6 GHz to avoid a warning in mesh
 * fix two memory leaks in mesh
 * fix a TX status bug leading to a memory leak
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix the missing clk_disable_unprepare() before return
from gemini_ethernet_port_probe() in the error handling case.

Fixes: 4d5ae32f ("net: ethernet: Add a driver for Gemini gigabit ethernet")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

On an error return, jump to the unlock at the end to be sure
to unlock the queue_lock mutex.

Fixes: 0925e9db ("ionic: use mutex to protect queue operations")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>

atmtcp_remove_persistent() invokes atm_dev_lookup(), which returns a
reference of atm_dev with increased refcount or NULL if fails.

The refcount leaks issues occur in two error handling paths. If
dev_data->persist is zero or PRIV(dev)->vcc isn't NULL, the function
returns 0 without decreasing the refcount kept by a local variable,
resulting in refcount leaks.

Fix the issue by adding atm_dev_put() before returning 0 both when
dev_data->persist is zero or PRIV(dev)->vcc isn't NULL.
Signed-off-by: Xin Xiong <xiongx18@fudan.edu.cn>
Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

in recent kernel versions there are warnings about incorrect MTU size
like these:

eth0: mtu greater than device maximum
mtk_soc_eth 1b100000.ethernet eth0: error -22 setting MTU to include DSA overhead

Fixes: bfcb8132 ("net: dsa: configure the MTU for switch ports")
Fixes: 72579e14 ("net: dsa: don't fail to probe if we couldn't set the MTU")
Fixes: 7a4c53be ("net: report invalid mtu value via netlink extack")
Signed-off-by: Landen Chao <landen.chao@mediatek.com>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

If some processes in nixge_probe() fail, free_netdev(dev)
needs to be called to aviod a memory leak.

Fixes: 87ab2079 ("net: nixge: Separate ctrl and dma resources")
Fixes: abcd3d6f ("net: nixge: Fix error path for obtaining mac address")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Lu Wei <luwei32@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Number of .dumpit functions try to ignore -EOPNOTSUPP errors.
Recent change missed that, and started reporting all errors
but -EMSGSIZE back from dumps. This leads to situation like
this:

$ devlink dev info
devlink answers: Operation not supported

Dump should not report an error just because the last device
to be queried could not provide an answer.

To fix this and avoid similar confusion make sure we clear
err properly, and not leave it set to an error if we don't
terminate the iteration.

Fixes: c62c2cfb ("net: devlink: don't ignore errors during dumpit")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There's a race between rxrpc_sendmsg setting up a call, but then failing to
send anything on it due to an error, and recvmsg() seeing the call
completion occur and trying to return the state to the user.

An assertion fails in rxrpc_recvmsg() because the call has already been
released from the socket and is about to be released again as recvmsg deals
with it.  (The recvmsg_q queue on the socket holds a ref, so there's no
problem with use-after-free.)

We also have to be careful not to end up reporting an error twice, in such
a way that both returns indicate to userspace that the user ID supplied
with the call is no longer in use - which could cause the client to
malfunction if it recycles the user ID fast enough.

Fix this by the following means:

 (1) When sendmsg() creates a call after the point that the call has been
     successfully added to the socket, don't return any errors through
     sendmsg(), but rather complete the call and let recvmsg() retrieve
     them.  Make sendmsg() return 0 at this point.  Further calls to
     sendmsg() for that call will fail with ESHUTDOWN.

     Note that at this point, we haven't send any packets yet, so the
     server doesn't yet know about the call.

 (2) If sendmsg() returns an error when it was expected to create a new
     call, it means that the user ID wasn't used.

 (3) Mark the call disconnected before marking it completed to prevent an
     oops in rxrpc_release_call().

 (4) recvmsg() will then retrieve the error and set MSG_EOR to indicate
     that the user ID is no longer known by the kernel.

An oops like the following is produced:

	kernel BUG at net/rxrpc/recvmsg.c:605!
	...
	RIP: 0010:rxrpc_recvmsg+0x256/0x5ae
	...
	Call Trace:
	 ? __init_waitqueue_head+0x2f/0x2f
	 ____sys_recvmsg+0x8a/0x148
	 ? import_iovec+0x69/0x9c
	 ? copy_msghdr_from_user+0x5c/0x86
	 ___sys_recvmsg+0x72/0xaa
	 ? __fget_files+0x22/0x57
	 ? __fget_light+0x46/0x51
	 ? fdget+0x9/0x1b
	 do_recvmmsg+0x15e/0x232
	 ? _raw_spin_unlock+0xa/0xb
	 ? vtime_delta+0xf/0x25
	 __x64_sys_recvmmsg+0x2c/0x2f
	 do_syscall_64+0x4c/0x78
	 entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fixes: 357f5ef6 ("rxrpc: Call rxrpc_release_call() on error in rxrpc_new_client_call()")
Reported-by: syzbot+b54969381df354936d96@syzkaller.appspotmail.com
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch is to replace Thor Thayer as Altera Triple Speed Ethernet
maintainer as he is moving to a different role.
Signed-off-by: Joyce Ooi <joyce.ooi@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When read netdevsim trap_flow_action_cookie, we need to init it first,
or we will get "Invalid argument" error.

Fixes: d3cbb907 ("netdevsim: add ACL trap reporting cookie as a metadata")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

IPV6_ADDRFORM causes resource leaks when converting an IPv6 socket
to IPv4, particularly struct ipv6_ac_socklist. Similar to
struct ipv6_mc_socklist, we should just close it on this path.

This bug can be easily reproduced with the following C program:

  #include <stdio.h>
  #include <string.h>
  #include <sys/types.h>
  #include <sys/socket.h>
  #include <arpa/inet.h>

  int main()
  {
    int s, value;
    struct sockaddr_in6 addr;
    struct ipv6_mreq m6;

    s = socket(AF_INET6, SOCK_DGRAM, 0);
    addr.sin6_family = AF_INET6;
    addr.sin6_port = htons(5000);
    inet_pton(AF_INET6, "::ffff:192.168.122.194", &addr.sin6_addr);
    connect(s, (struct sockaddr *)&addr, sizeof(addr));

    inet_pton(AF_INET6, "fe80::AAAA", &m6.ipv6mr_multiaddr);
    m6.ipv6mr_interface = 5;
    setsockopt(s, SOL_IPV6, IPV6_JOIN_ANYCAST, &m6, sizeof(m6));

    value = AF_INET;
    setsockopt(s, SOL_IPV6, IPV6_ADDRFORM, &value, sizeof(value));

    close(s);
    return 0;
  }

Reported-by: ch3332xr@gmail.com
Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

__bpfilter_process_sockopt never initialized the pos variable passed
to the pipe write. This has been mostly harmless in the past as pipes
ignore the offset, but the switch to kernel_write now verified the
position, which can lead to a failure depending on the exact stack
initialization pattern. Initialize the variable to zero to make
rw_verify_area happy.

Fixes: 6955a76f ("bpfilter: switch to kernel_write")
Reported-by: Christian Brauner <christian.brauner@ubuntu.com>
Reported-by: Rodrigo Madera <rodrigo.madera@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Rodrigo Madera <rodrigo.madera@gmail.com>
Tested-by: Christian Brauner <christian.brauner@ubuntu.com>
Reviewed-by: Christian Brauner <christian.brauner@ubuntu.com>
Link: https://lore.kernel.org/bpf/20200730160900.187157-1-hch@lst.de

We observed two panics involving races with igb_reset_task.
The first panic is caused by this race condition:

	kworker			reboot -f

	igb_reset_task
	igb_reinit_locked
	igb_down
	napi_synchronize
				__igb_shutdown
				igb_clear_interrupt_scheme
				igb_free_q_vectors
				igb_free_q_vector
				adapter->q_vector[v_idx] = NULL;
	napi_disable
	Panics trying to access
	adapter->q_vector[v_idx].napi_state

The second panic (a divide error) is caused by this race:

kworker		reboot -f	tx packet

igb_reset_task
		__igb_shutdown
		rtnl_lock()
		...
		igb_clear_interrupt_scheme
		igb_free_q_vectors
		adapter->num_tx_queues = 0
		...
		rtnl_unlock()
rtnl_lock()
igb_reinit_locked
igb_down
igb_up
netif_tx_start_all_queues
				dev_hard_start_xmit
				igb_xmit_frame
				igb_tx_queue_mapping
				Panics on
				r_idx % adapter->num_tx_queues

This commit applies to igb_reset_task the same changes that
were applied to ixgbe in commit 2f90b865 ("ixgbe: this patch
adds support for DCB to the kernel and ixgbe driver"),
commit 8f4c5c9f ("ixgbe: reinit_locked() should be called with
rtnl_lock") and commit 88adce4e ("ixgbe: fix possible race in
reset subtask").
Signed-off-by: Francesco Ruggeri <fruggeri@arista.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

After 'commit e086ba2f ("e1000e: disable s0ix entry and exit flows
 for ME systems")',
ThinkPad P14s always failed to disable ULP by ME.
'commit 0c80cdbf ("e1000e: Warn if disabling ULP failed")'
break out of init phy:

error log:
[   42.364753] e1000e 0000:00:1f.6 enp0s31f6: Failed to disable ULP
[   42.524626] e1000e 0000:00:1f.6 enp0s31f6: PHY Wakeup cause - Unicast Packet
[   42.822476] e1000e 0000:00:1f.6 enp0s31f6: Hardware Error

When disable s0ix, E1000_FWSM_ULP_CFG_DONE will never be 1.
If continue to init phy like before, it can work as before.
iperf test result good too.

Fixes: 0c80cdbf ("e1000e: Warn if disabling ULP failed")
Signed-off-by: Aaron Ma <aaron.ma@canonical.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

This warning can trigger if there is a mismatch between frames that were
sent with the sta pointer set vs tx status frames reported for the sta address.

This can happen due to race conditions on re-creating stations, or even
in the case of .sta_add/remove being used instead of .sta_state, which can cause
frames to be sent to a station that has not been uploaded yet.

If there is an actual underflow issue, it should show up in the device airtime
warning below, so it is better to remove this one.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20200725084533.13829-1-nbd@nbd.nameSigned-off-by: Johannes Berg <johannes.berg@intel.com>

Allocated ack_frame id from local->ack_status_frames is not really
stored in the tx_info for 802.3 Tx path. Due to this, tx ack status
is not reported and ack_frame id is not freed for the buffers requiring
tx ack status. Also move the memset to 0 of tx_info before
IEEE80211_TX_CTL_REQ_TX_STATUS flag assignment.

Fixes: 50ff477a ("mac80211: add 802.11 encapsulation offloading support")
Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org>
Link: https://lore.kernel.org/r/1595427617-1713-1-git-send-email-vthiagar@codeaurora.orgSigned-off-by: Johannes Berg <johannes.berg@intel.com>

In the case where a vendor command does not implement doit, and has no
flags set, doit would not be validated and a NULL pointer dereference
would occur, for example when invoking the vendor command via iw.

I encountered this while developing new vendor commands.  Perhaps in
practice it is advisable to always implement doit along with dumpit,
but it seems reasonable to me to always check doit anyway, not just
when NEED_WDEV.
Signed-off-by: Julian Squires <julian@cipht.net>
Link: https://lore.kernel.org/r/20200706211353.2366470-1-julian@cipht.netSigned-off-by: Johannes Berg <johannes.berg@intel.com>

A mpath object can hold reference on a list of skb that are waiting for
mpath resolution to be sent. When destroying a mpath this skb list
should be cleaned up in order to not leak memory.

Fixing that kind of leak:

unreferenced object 0xffff0000181c9300 (size 1088):
  comm "openvpn", pid 1782, jiffies 4295071698 (age 80.416s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 f9 80 36 00 00 00 00 00  ..........6.....
    02 00 07 40 00 00 00 00 00 00 00 00 00 00 00 00  ...@............
  backtrace:
    [<000000004bc6a443>] kmem_cache_alloc+0x1a4/0x2f0
    [<000000002caaef13>] sk_prot_alloc.isra.39+0x34/0x178
    [<00000000ceeaa916>] sk_alloc+0x34/0x228
    [<00000000ca1f1d04>] inet_create+0x198/0x518
    [<0000000035626b1c>] __sock_create+0x134/0x328
    [<00000000a12b3a87>] __sys_socket+0xb0/0x158
    [<00000000ff859f23>] __arm64_sys_socket+0x40/0x58
    [<00000000263486ec>] el0_svc_handler+0xd0/0x1a0
    [<0000000005b5157d>] el0_svc+0x8/0xc
unreferenced object 0xffff000012973a40 (size 216):
  comm "openvpn", pid 1782, jiffies 4295082137 (age 38.660s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    00 c0 06 16 00 00 ff ff 00 93 1c 18 00 00 ff ff  ................
  backtrace:
    [<000000004bc6a443>] kmem_cache_alloc+0x1a4/0x2f0
    [<0000000023c8c8f9>] __alloc_skb+0xc0/0x2b8
    [<000000007ad950bb>] alloc_skb_with_frags+0x60/0x320
    [<00000000ef90023a>] sock_alloc_send_pskb+0x388/0x3c0
    [<00000000104fb1a3>] sock_alloc_send_skb+0x1c/0x28
    [<000000006919d2dd>] __ip_append_data+0xba4/0x11f0
    [<0000000083477587>] ip_make_skb+0x14c/0x1a8
    [<0000000024f3d592>] udp_sendmsg+0xaf0/0xcf0
    [<000000005aabe255>] inet_sendmsg+0x5c/0x80
    [<000000008651ea08>] __sys_sendto+0x15c/0x218
    [<000000003505c99b>] __arm64_sys_sendto+0x74/0x90
    [<00000000263486ec>] el0_svc_handler+0xd0/0x1a0
    [<0000000005b5157d>] el0_svc+0x8/0xc

Fixes: 2bdaf386 (mac80211: mesh: move path tables into if_mesh)
Signed-off-by: Remi Pommarel <repk@triplefau.lt>
Link: https://lore.kernel.org/r/20200704135419.27703-1-repk@triplefau.ltSigned-off-by: Johannes Berg <johannes.berg@intel.com>

At ieee80211_join_mesh() some ie data could have been allocated (see
copy_mesh_setup()) and need to be cleaned up when leaving the mesh.

This fixes the following kmemleak report:

unreferenced object 0xffff0000116bc600 (size 128):
  comm "wpa_supplicant", pid 608, jiffies 4294898983 (age 293.484s)
  hex dump (first 32 bytes):
    30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00  0...............
    00 0f ac 08 00 00 00 00 c4 65 40 00 00 00 00 00  .........e@.....
  backtrace:
    [<00000000bebe439d>] __kmalloc_track_caller+0x1c0/0x330
    [<00000000a349dbe1>] kmemdup+0x28/0x50
    [<0000000075d69baa>] ieee80211_join_mesh+0x6c/0x3b8 [mac80211]
    [<00000000683bb98b>] __cfg80211_join_mesh+0x1e8/0x4f0 [cfg80211]
    [<0000000072cb507f>] nl80211_join_mesh+0x520/0x6b8 [cfg80211]
    [<0000000077e9bcf9>] genl_family_rcv_msg+0x374/0x680
    [<00000000b1bd936d>] genl_rcv_msg+0x78/0x108
    [<0000000022c53788>] netlink_rcv_skb+0xb0/0x1c0
    [<0000000011af8ec9>] genl_rcv+0x34/0x48
    [<0000000069e41f53>] netlink_unicast+0x268/0x2e8
    [<00000000a7517316>] netlink_sendmsg+0x320/0x4c0
    [<0000000069cba205>] ____sys_sendmsg+0x354/0x3a0
    [<00000000e06bab0f>] ___sys_sendmsg+0xd8/0x120
    [<0000000037340728>] __sys_sendmsg+0xa4/0xf8
    [<000000004fed9776>] __arm64_sys_sendmsg+0x44/0x58
    [<000000001c1e5647>] el0_svc_handler+0xd0/0x1a0

Fixes: c80d545d (mac80211: Let userspace enable and configure vendor specific path selection.)
Signed-off-by: Remi Pommarel <repk@triplefau.lt>
Link: https://lore.kernel.org/r/20200704135007.27292-1-repk@triplefau.ltSigned-off-by: Johannes Berg <johannes.berg@intel.com>

The commit 24a2042c ("mac80211: add HE 6 GHz Band Capability
element") failed to check device capability before adding HE 6 GHz
capability element. Below warning is reported in 11ac device in mesh.
Fix that by checking device capability at HE 6 GHz cap IE addition
in mesh beacon and association request.

WARNING: CPU: 1 PID: 1897 at net/mac80211/util.c:2878
ieee80211_ie_build_he_6ghz_cap+0x149/0x150 [mac80211]
[ 3138.720358] Call Trace:
[ 3138.720361]  ieee80211_mesh_build_beacon+0x462/0x530 [mac80211]
[ 3138.720363]  ieee80211_start_mesh+0xa8/0xf0 [mac80211]
[ 3138.720365]  __cfg80211_join_mesh+0x122/0x3e0 [cfg80211]
[ 3138.720368]  nl80211_join_mesh+0x3d3/0x510 [cfg80211]

Fixes: 24a2042c ("mac80211: add HE 6 GHz Band Capability element")
Reported-by: Markus Theil <markus.theil@tu-ilmenau.de>
Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org>
Link: https://lore.kernel.org/r/1593656424-18240-1-git-send-email-rmanohar@codeaurora.orgSigned-off-by: Johannes Berg <johannes.berg@intel.com>

Currently, espintcp_rcv drops packets silently, which makes debugging
issues difficult. Count packets as either XfrmInHdrError (when the
packet was too short or contained invalid data) or XfrmInError (for
other issues).
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>

Currently, short messages (less than 4 bytes after the length header)
will break the stream of messages. This is unnecessary, since we can
still parse messages even if they're too short to contain any usable
data. This is also bogus, as keepalive messages (a single 0xff byte),
though not needed with TCP encapsulation, should be allowed.

This patch changes the stream parser so that short messages are
accepted and dropped in the kernel. Messages that contain a valid SPI
or non-ESP header are processed as before.

Fixes: e27cca96 ("xfrm: add espintcp (RFC 8229)")
Reported-by: Andrew Cagney <cagney@libreswan.org>
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>

Add test validating that all inner maps are released properly after skeleton
is destroyed. To ensure determinism, trigger kernel-side synchronize_rcu()
before checking map existence by their IDs.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20200729040913.2815687-2-andriin@fb.com

Fix HASH_OF_MAPS bug of not putting inner map pointer on bpf_map_elem_update()
operation. This is due to per-cpu extra_elems optimization, which bypassed
free_htab_elem() logic doing proper clean ups. Make sure that inner map is put
properly in optimized case as well.

Fixes: 8c290e60 ("bpf: fix hashmap extra_elems logic")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20200729040913.2815687-1-andriin@fb.com

RX queue IRQ mappings are disposed in both the TX IRQ and RX IRQ
error paths. Fix this and dispose of TX IRQ mappings correctly in
case of an error.

Fixes: ea22d51a ("ibmvnic: simplify and improve driver probe function")
Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Ido Schimmel says:

====================
mlxsw fixes

This patch set contains various fixes for mlxsw.

Patches #1-#2 fix two trap related issues introduced in previous cycle.

Patches #3-#5 fix rare use-after-frees discovered by syzkaller. After
over a week of fuzzing with the fixes, the bugs did not reproduce.

Patch #6 from Amit fixes an issue in the ethtool selftest that was
recently discovered after running the test on a new platform that
supports only 1Gbps and 10Gbps speeds.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The test case check_highest_speed_is_chosen() configures $h1 to
advertise a subset of its supported speeds and checks that $h2 chooses
the highest speed from the subset.

To find the common advertised speeds between $h1 and $h2,
common_speeds_get() is called.

Currently, the first speed returned from common_speeds_get() is removed
claiming "h1 does not advertise this speed". The claim is wrong because
the function is called after $h1 already advertised a subset of speeds.

In case $h1 supports only two speeds, it will advertise a single speed
which will be later removed because of previously mentioned bug. This
results in the test needlessly failing. When more than two speeds are
supported this is not an issue because the first advertised speed
is the lowest one.

Fix this by not removing any speed from the list of commonly advertised
speeds.

Fixes: 64916b57 ("selftests: forwarding: Add speed and auto-negotiation test")
Reported-by: Danielle Ratson <danieller@mellanox.com>
Signed-off-by: Amit Cohen <amitc@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Several notifiers are registered as part of router initialization.
Since some of these notifiers are registered before the end of the
initialization, it is possible for them to access uninitialized or freed
memory when processing notifications [1].

Additionally, some of these notifiers queue work items on a workqueue.
If these work items are executed after the router was de-initialized,
they will access freed memory.

Fix both problems by moving the registration of the notifiers to the end
of the router initialization and flush the work queue after they are
unregistered.

[1]
BUG: KASAN: use-after-free in __mutex_lock_common kernel/locking/mutex.c:938 [inline]
BUG: KASAN: use-after-free in __mutex_lock+0xeea/0x1340 kernel/locking/mutex.c:1103
Read of size 8 at addr ffff888038c3a6e0 by task kworker/u4:1/61

CPU: 1 PID: 61 Comm: kworker/u4:1 Not tainted 5.8.0-rc2+ #36
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
Workqueue: mlxsw_core_ordered mlxsw_sp_inet6addr_event_work
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0xf6/0x16e lib/dump_stack.c:118
 print_address_description.constprop.0+0x1c/0x250 mm/kasan/report.c:383
 __kasan_report mm/kasan/report.c:513 [inline]
 kasan_report.cold+0x1f/0x37 mm/kasan/report.c:530
 __mutex_lock_common kernel/locking/mutex.c:938 [inline]
 __mutex_lock+0xeea/0x1340 kernel/locking/mutex.c:1103
 mlxsw_sp_inet6addr_event_work+0xb3/0x1b0 drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:7123
 process_one_work+0xa3e/0x17a0 kernel/workqueue.c:2269
 worker_thread+0x9e/0x1050 kernel/workqueue.c:2415
 kthread+0x355/0x470 kernel/kthread.c:291
 ret_from_fork+0x22/0x30 arch/x86/entry/entry_64.S:293

Allocated by task 1298:
 save_stack+0x1b/0x40 mm/kasan/common.c:48
 set_track mm/kasan/common.c:56 [inline]
 __kasan_kmalloc mm/kasan/common.c:494 [inline]
 __kasan_kmalloc.constprop.0+0xc2/0xd0 mm/kasan/common.c:467
 kmalloc include/linux/slab.h:555 [inline]
 kzalloc include/linux/slab.h:669 [inline]
 mlxsw_sp_router_init+0xb2/0x1d20 drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:8074
 mlxsw_sp_init+0xbd8/0x3ac0 drivers/net/ethernet/mellanox/mlxsw/spectrum.c:2932
 __mlxsw_core_bus_device_register+0x657/0x10d0 drivers/net/ethernet/mellanox/mlxsw/core.c:1375
 mlxsw_core_bus_device_register drivers/net/ethernet/mellanox/mlxsw/core.c:1436 [inline]
 mlxsw_devlink_core_bus_device_reload_up+0xcd/0x150 drivers/net/ethernet/mellanox/mlxsw/core.c:1133
 devlink_reload net/core/devlink.c:2959 [inline]
 devlink_reload+0x281/0x3b0 net/core/devlink.c:2944
 devlink_nl_cmd_reload+0x2f1/0x7c0 net/core/devlink.c:2987
 genl_family_rcv_msg_doit net/netlink/genetlink.c:691 [inline]
 genl_family_rcv_msg net/netlink/genetlink.c:736 [inline]
 genl_rcv_msg+0x611/0x9d0 net/netlink/genetlink.c:753
 netlink_rcv_skb+0x152/0x440 net/netlink/af_netlink.c:2469
 genl_rcv+0x24/0x40 net/netlink/genetlink.c:764
 netlink_unicast_kernel net/netlink/af_netlink.c:1303 [inline]
 netlink_unicast+0x53a/0x750 net/netlink/af_netlink.c:1329
 netlink_sendmsg+0x850/0xd90 net/netlink/af_netlink.c:1918
 sock_sendmsg_nosec net/socket.c:652 [inline]
 sock_sendmsg+0x150/0x190 net/socket.c:672
 ____sys_sendmsg+0x6d8/0x840 net/socket.c:2363
 ___sys_sendmsg+0xff/0x170 net/socket.c:2417
 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2450
 do_syscall_64+0x56/0xa0 arch/x86/entry/common.c:359
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

Freed by task 1348:
 save_stack+0x1b/0x40 mm/kasan/common.c:48
 set_track mm/kasan/common.c:56 [inline]
 kasan_set_free_info mm/kasan/common.c:316 [inline]
 __kasan_slab_free+0x12c/0x170 mm/kasan/common.c:455
 slab_free_hook mm/slub.c:1474 [inline]
 slab_free_freelist_hook mm/slub.c:1507 [inline]
 slab_free mm/slub.c:3072 [inline]
 kfree+0xe6/0x320 mm/slub.c:4063
 mlxsw_sp_fini+0x340/0x4e0 drivers/net/ethernet/mellanox/mlxsw/spectrum.c:3132
 mlxsw_core_bus_device_unregister+0x16c/0x6d0 drivers/net/ethernet/mellanox/mlxsw/core.c:1474
 mlxsw_devlink_core_bus_device_reload_down+0x8e/0xc0 drivers/net/ethernet/mellanox/mlxsw/core.c:1123
 devlink_reload+0xc6/0x3b0 net/core/devlink.c:2952
 devlink_nl_cmd_reload+0x2f1/0x7c0 net/core/devlink.c:2987
 genl_family_rcv_msg_doit net/netlink/genetlink.c:691 [inline]
 genl_family_rcv_msg net/netlink/genetlink.c:736 [inline]
 genl_rcv_msg+0x611/0x9d0 net/netlink/genetlink.c:753
 netlink_rcv_skb+0x152/0x440 net/netlink/af_netlink.c:2469
 genl_rcv+0x24/0x40 net/netlink/genetlink.c:764
 netlink_unicast_kernel net/netlink/af_netlink.c:1303 [inline]
 netlink_unicast+0x53a/0x750 net/netlink/af_netlink.c:1329
 netlink_sendmsg+0x850/0xd90 net/netlink/af_netlink.c:1918
 sock_sendmsg_nosec net/socket.c:652 [inline]
 sock_sendmsg+0x150/0x190 net/socket.c:672
 ____sys_sendmsg+0x6d8/0x840 net/socket.c:2363
 ___sys_sendmsg+0xff/0x170 net/socket.c:2417
 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2450
 do_syscall_64+0x56/0xa0 arch/x86/entry/common.c:359
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

The buggy address belongs to the object at ffff888038c3a000
 which belongs to the cache kmalloc-2k of size 2048
The buggy address is located 1760 bytes inside of
 2048-byte region [ffff888038c3a000, ffff888038c3a800)
The buggy address belongs to the page:
page:ffffea0000e30e00 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 head:ffffea0000e30e00 order:3 compound_mapcount:0 compound_pincount:0
flags: 0x100000000010200(slab|head)
raw: 0100000000010200 dead000000000100 dead000000000122 ffff88806c40c000
raw: 0000000000000000 0000000000080008 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff888038c3a580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
 ffff888038c3a600: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff888038c3a680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                                                       ^
 ffff888038c3a700: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
 ffff888038c3a780: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb

Fixes: 965fa8e6 ("mlxsw: spectrum_router: Make RIF deletion more robust")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The lifetime of EMAD transactions (i.e., 'struct mlxsw_reg_trans') is
managed using RCU. They are freed using kfree_rcu() once the transaction
ends.

However, in case the transaction failed it is freed immediately after being
removed from the active transactions list. This is problematic because it is
still possible for a different CPU to dereference the transaction from an RCU
read-side critical section while traversing the active transaction list in
mlxsw_emad_rx_listener_func(). In which case, a use-after-free is triggered
[1].

Fix this by freeing the transaction after a grace period by calling
kfree_rcu().

[1]
BUG: KASAN: use-after-free in mlxsw_emad_rx_listener_func+0x969/0xac0 drivers/net/ethernet/mellanox/mlxsw/core.c:671
Read of size 8 at addr ffff88800b7964e8 by task syz-executor.2/2881

CPU: 0 PID: 2881 Comm: syz-executor.2 Not tainted 5.8.0-rc4+ #44
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
Call Trace:
 <IRQ>
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0xf6/0x16e lib/dump_stack.c:118
 print_address_description.constprop.0+0x1c/0x250 mm/kasan/report.c:383
 __kasan_report mm/kasan/report.c:513 [inline]
 kasan_report.cold+0x1f/0x37 mm/kasan/report.c:530
 mlxsw_emad_rx_listener_func+0x969/0xac0 drivers/net/ethernet/mellanox/mlxsw/core.c:671
 mlxsw_core_skb_receive+0x571/0x700 drivers/net/ethernet/mellanox/mlxsw/core.c:2061
 mlxsw_pci_cqe_rdq_handle drivers/net/ethernet/mellanox/mlxsw/pci.c:595 [inline]
 mlxsw_pci_cq_tasklet+0x12a6/0x2520 drivers/net/ethernet/mellanox/mlxsw/pci.c:651
 tasklet_action_common.isra.0+0x13f/0x3e0 kernel/softirq.c:550
 __do_softirq+0x223/0x964 kernel/softirq.c:292
 asm_call_on_stack+0x12/0x20 arch/x86/entry/entry_64.S:711
 </IRQ>
 __run_on_irqstack arch/x86/include/asm/irq_stack.h:22 [inline]
 run_on_irqstack_cond arch/x86/include/asm/irq_stack.h:48 [inline]
 do_softirq_own_stack+0x109/0x140 arch/x86/kernel/irq_64.c:77
 invoke_softirq kernel/softirq.c:387 [inline]
 __irq_exit_rcu kernel/softirq.c:417 [inline]
 irq_exit_rcu+0x16f/0x1a0 kernel/softirq.c:429
 sysvec_apic_timer_interrupt+0x4e/0xd0 arch/x86/kernel/apic/apic.c:1091
 asm_sysvec_apic_timer_interrupt+0x12/0x20 arch/x86/include/asm/idtentry.h:587
RIP: 0010:arch_local_irq_restore arch/x86/include/asm/irqflags.h:85 [inline]
RIP: 0010:__raw_spin_unlock_irqrestore include/linux/spinlock_api_smp.h:160 [inline]
RIP: 0010:_raw_spin_unlock_irqrestore+0x3b/0x40 kernel/locking/spinlock.c:191
Code: e8 2a c3 f4 fc 48 89 ef e8 12 96 f5 fc f6 c7 02 75 11 53 9d e8 d6 db 11 fd 65 ff 0d 1f 21 b3 56 5b 5d c3 e8 a7 d7 11 fd 53 9d <eb> ed 0f 1f 00 55 48 89 fd 65 ff 05 05 21 b3 56 ff 74 24 08 48 8d
RSP: 0018:ffff8880446ffd80 EFLAGS: 00000286
RAX: 0000000000000006 RBX: 0000000000000286 RCX: 0000000000000006
RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffffa94ecea9
RBP: ffff888012934408 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000001 R11: fffffbfff57be301 R12: 1ffff110088dffc1
R13: ffff888037b817c0 R14: ffff88802442415a R15: ffff888024424000
 __do_sys_perf_event_open+0x1b5d/0x2bd0 kernel/events/core.c:11874
 do_syscall_64+0x56/0xa0 arch/x86/entry/common.c:384
 entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x473dbd
Code: Bad RIP value.
RSP: 002b:00007f21e5e9cc28 EFLAGS: 00000246 ORIG_RAX: 000000000000012a
RAX: ffffffffffffffda RBX: 000000000057bf00 RCX: 0000000000473dbd
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000020000040
RBP: 000000000057bf00 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000003 R11: 0000000000000246 R12: 000000000057bf0c
R13: 00007ffd0493503f R14: 00000000004d0f46 R15: 00007f21e5e9cd80

Allocated by task 871:
 save_stack+0x1b/0x40 mm/kasan/common.c:48
 set_track mm/kasan/common.c:56 [inline]
 __kasan_kmalloc mm/kasan/common.c:494 [inline]
 __kasan_kmalloc.constprop.0+0xc2/0xd0 mm/kasan/common.c:467
 kmalloc include/linux/slab.h:555 [inline]
 kzalloc include/linux/slab.h:669 [inline]
 mlxsw_core_reg_access_emad+0x70/0x1410 drivers/net/ethernet/mellanox/mlxsw/core.c:1812
 mlxsw_core_reg_access+0xeb/0x540 drivers/net/ethernet/mellanox/mlxsw/core.c:1991
 mlxsw_sp_port_get_hw_xstats+0x335/0x7e0 drivers/net/ethernet/mellanox/mlxsw/spectrum.c:1130
 update_stats_cache+0xf4/0x140 drivers/net/ethernet/mellanox/mlxsw/spectrum.c:1173
 process_one_work+0xa3e/0x17a0 kernel/workqueue.c:2269
 worker_thread+0x9e/0x1050 kernel/workqueue.c:2415
 kthread+0x355/0x470 kernel/kthread.c:291
 ret_from_fork+0x22/0x30 arch/x86/entry/entry_64.S:293

Freed by task 871:
 save_stack+0x1b/0x40 mm/kasan/common.c:48
 set_track mm/kasan/common.c:56 [inline]
 kasan_set_free_info mm/kasan/common.c:316 [inline]
 __kasan_slab_free+0x12c/0x170 mm/kasan/common.c:455
 slab_free_hook mm/slub.c:1474 [inline]
 slab_free_freelist_hook mm/slub.c:1507 [inline]
 slab_free mm/slub.c:3072 [inline]
 kfree+0xe6/0x320 mm/slub.c:4052
 mlxsw_core_reg_access_emad+0xd45/0x1410 drivers/net/ethernet/mellanox/mlxsw/core.c:1819
 mlxsw_core_reg_access+0xeb/0x540 drivers/net/ethernet/mellanox/mlxsw/core.c:1991
 mlxsw_sp_port_get_hw_xstats+0x335/0x7e0 drivers/net/ethernet/mellanox/mlxsw/spectrum.c:1130
 update_stats_cache+0xf4/0x140 drivers/net/ethernet/mellanox/mlxsw/spectrum.c:1173
 process_one_work+0xa3e/0x17a0 kernel/workqueue.c:2269
 worker_thread+0x9e/0x1050 kernel/workqueue.c:2415
 kthread+0x355/0x470 kernel/kthread.c:291
 ret_from_fork+0x22/0x30 arch/x86/entry/entry_64.S:293

The buggy address belongs to the object at ffff88800b796400
 which belongs to the cache kmalloc-512 of size 512
The buggy address is located 232 bytes inside of
 512-byte region [ffff88800b796400, ffff88800b796600)
The buggy address belongs to the page:
page:ffffea00002de500 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 head:ffffea00002de500 order:2 compound_mapcount:0 compound_pincount:0
flags: 0x100000000010200(slab|head)
raw: 0100000000010200 dead000000000100 dead000000000122 ffff88806c402500
raw: 0000000000000000 0000000000100010 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff88800b796380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
 ffff88800b796400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff88800b796480: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                                                          ^
 ffff88800b796500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
 ffff88800b796580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb

Fixes: caf7297e ("mlxsw: core: Introduce support for asynchronous EMAD register access")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>