1. 22 Mar, 2017 3 commits
  2. 20 Mar, 2017 14 commits
  3. 19 Mar, 2017 15 commits
  4. 18 Mar, 2017 8 commits
    • Nicholas Bellinger's avatar
      tcmu: Convert cmd_time_out into backend device attribute · 7d7a7435
      Nicholas Bellinger authored
      Instead of putting cmd_time_out under ../target/core/user_0/foo/control,
      which has historically been used by parameters needed for initial
      backend device configuration, go ahead and move cmd_time_out into
      a backend device attribute.
      
      In order to do this, tcmu_module_init() has been updated to create
      a local struct configfs_attribute **tcmu_attrs, that is based upon
      the existing passthrough_attrib_attrs along with the new cmd_time_out
      attribute.  Once **tcm_attrs has been setup, go ahead and point
      it at tcmu_ops->tb_dev_attrib_attrs so it's picked up by target-core.
      
      Also following MNC's previous change, ->cmd_time_out is stored in
      milliseconds but exposed via configfs in seconds.  Also, note this
      patch restricts the modification of ->cmd_time_out to before +
      after the TCMU device has been configured, but not while it has
      active fabric exports.
      
      Cc: Mike Christie <mchristi@redhat.com>
      Signed-off-by: default avatarNicholas Bellinger <nab@linux-iscsi.org>
      7d7a7435
    • Mike Christie's avatar
      tcmu: make cmd timeout configurable · af980e46
      Mike Christie authored
      A single daemon could implement multiple types of devices
      using multuple types of real devices that may not support
      restarting from crashes and/or handling tcmu timeouts. This
      makes the cmd timeout configurable, so handlers that do not
      support it can turn if off for now.
      Signed-off-by: default avatarMike Christie <mchristi@redhat.com>
      Signed-off-by: default avatarNicholas Bellinger <nab@linux-iscsi.org>
      af980e46
    • Mike Christie's avatar
      tcmu: add helper to check if dev was configured · 972c7f16
      Mike Christie authored
      This adds a helper to check if the dev was configured. It
      will be used in the next patch to prevent updates to some
      config settings after the device has been setup.
      Signed-off-by: default avatarMike Christie <mchristi@redhat.com>
      Signed-off-by: default avatarNicholas Bellinger <nab@linux-iscsi.org>
      972c7f16
    • Linus Torvalds's avatar
      Merge tag 'openrisc-for-linus' of git://github.com/openrisc/linux · 93afaa45
      Linus Torvalds authored
      Pull OpenRISC fixes from Stafford Horne:
       "OpenRISC fixes for build issues that were exposed by kbuild robots
        after 4.11 merge. All from allmodconfig builds. This includes:
      
         - bug in the handling of 8-byte get_user() calls
      
         - module build failure due to multile missing symbol exports"
      
      * tag 'openrisc-for-linus' of git://github.com/openrisc/linux:
        openrisc: Export symbols needed by modules
        openrisc: fix issue handling 8 byte get_user calls
        openrisc: xchg: fix `computed is not used` warning
      93afaa45
    • Mike Christie's avatar
      target: fix race during implicit transition work flushes · 760bf578
      Mike Christie authored
      This fixes the following races:
      
      1. core_alua_do_transition_tg_pt could have read
      tg_pt_gp_alua_access_state and gone into this if chunk:
      
      if (!explicit &&
              atomic_read(&tg_pt_gp->tg_pt_gp_alua_access_state) ==
                 ALUA_ACCESS_STATE_TRANSITION) {
      
      and then core_alua_do_transition_tg_pt_work could update the
      state. core_alua_do_transition_tg_pt would then only set
      tg_pt_gp_alua_pending_state and the tg_pt_gp_alua_access_state would
      not get updated with the second calls state.
      
      2. core_alua_do_transition_tg_pt could be setting
      tg_pt_gp_transition_complete while the tg_pt_gp_transition_work
      is already completing. core_alua_do_transition_tg_pt then waits on the
      completion that will never be called.
      
      To handle these issues, we just call flush_work which will return when
      core_alua_do_transition_tg_pt_work has completed so there is no need
      to do the complete/wait. And, if core_alua_do_transition_tg_pt_work
      was running, instead of trying to sneak in the state change, we just
      schedule up another core_alua_do_transition_tg_pt_work call.
      
      Note that this does not handle a possible race where there are multiple
      threads call core_alua_do_transition_tg_pt at the same time. I think
      we need a mutex in target_tg_pt_gp_alua_access_state_store.
      Signed-off-by: default avatarMike Christie <mchristi@redhat.com>
      Signed-off-by: default avatarNicholas Bellinger <nab@linux-iscsi.org>
      760bf578
    • Mike Christie's avatar
      target: allow userspace to set state to transitioning · 1ca4d4fa
      Mike Christie authored
      Userspace target_core_user handlers like tcmu-runner may want to set the
      ALUA state to transitioning while it does implicit transitions. This
      patch allows that state when set from configfs.
      Signed-off-by: default avatarMike Christie <mchristi@redhat.com>
      Signed-off-by: default avatarNicholas Bellinger <nab@linux-iscsi.org>
      1ca4d4fa
    • Mike Christie's avatar
      target: fix ALUA transition timeout handling · d7175373
      Mike Christie authored
      The implicit transition time tells initiators the min time
      to wait before timing out a transition. We currently schedule
      the transition to occur in tg_pt_gp_implicit_trans_secs
      seconds so there is no room for delays. If
      core_alua_do_transition_tg_pt_work->core_alua_update_tpg_primary_metadata
      needs to write out info to a remote file, then the initiator can
      easily time out the operation.
      Signed-off-by: default avatarMike Christie <mchristi@redhat.com>
      Signed-off-by: default avatarNicholas Bellinger <nab@linux-iscsi.org>
      d7175373
    • Mike Christie's avatar
      target: Use system workqueue for ALUA transitions · 207ee841
      Mike Christie authored
      If tcmu-runner is processing a STPG and needs to change the kernel's
      ALUA state then we cannot use the same work queue for task management
      requests and ALUA transitions, because we could deadlock. The problem
      occurs when a STPG times out before tcmu-runner is able to
      call into target_tg_pt_gp_alua_access_state_store->
      core_alua_do_port_transition -> core_alua_do_transition_tg_pt ->
      queue_work. In this case, the tmr is on the work queue waiting for
      the STPG to complete, but the STPG transition is now queued behind
      the waiting tmr.
      
      Note:
      This bug will also be fixed by this patch:
      http://www.spinics.net/lists/target-devel/msg14560.html
      which switches the tmr code to use the system workqueues.
      
      For both, I am not sure if we need a dedicated workqueue since
      it is not a performance path and I do not think we need WQ_MEM_RECLAIM
      to make forward progress to free up memory like the block layer does.
      Signed-off-by: default avatarMike Christie <mchristi@redhat.com>
      Signed-off-by: default avatarNicholas Bellinger <nab@linux-iscsi.org>
      207ee841