- 27 Apr, 2020 1 commit
-
-
Pablo Neira Ayuso authored
So far, the set elements could store up to 128-bits in the data area. Signed-off-by:Pablo Neira Ayuso <pablo@netfilter.org>
-
- 26 Apr, 2020 28 commits
-
-
Bodong Wang authored
This bit indicates that the conntrack entry is offloaded to hardware flow table. nf_conntrack entry will be tagged with [HW_OFFLOAD] if it's offload to hardware. cat /proc/net/nf_conntrack ipv4 2 tcp 6 \ src=1.1.1.17 dst=1.1.1.16 sport=56394 dport=5001 \ src=1.1.1.16 dst=1.1.1.17 sport=5001 dport=56394 [HW_OFFLOAD] \ mark=0 zone=0 use=3 Note that HW_OFFLOAD/OFFLOAD/ASSURED are mutually exclusive. Changelog: * V1->V2: - Remove check of lastused from stats. It was meant for cases such as removing driver module while traffic still running. Better to handle such cases from garbage collector. Signed-off-by:
Bodong Wang <bodong@mellanox.com> Reviewed-by:
Oz Shlomo <ozsh@mellanox.com> Reviewed-by:
Paul Blakey <paulb@mellanox.com> Signed-off-by:
-
Huazhong Tan authored
Since hclge_set_umv_space() is only called by hclge_init_umv_space(), parameter 'allocated_size' will not be NULL. Signed-off-by:
Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Tonghao Zhang authored
Compile the kernel for arm 32 platform, the build warning found. To fix that, should use div_u64() for divisions. | net/openvswitch/meter.c:396: undefined reference to `__udivdi3' [add more commit msg, change reported tag, and use div_u64 instead of do_div by Tonghao] Fixes: e5735887 ("net: openvswitch: use u64 for meter bucket") Reported-by:
kbuild test robot <lkp@intel.com> Signed-off-by:
Tonghao Zhang <xiangxia.m.yue@gmail.com> Tested-by:
-
Tonghao Zhang authored
To fix the following sparse warning: | net/openvswitch/meter.c:109:38: sparse: sparse: incorrect type | in assignment (different address spaces) ... | net/openvswitch/meter.c:720:45: sparse: sparse: incorrect type | in argument 1 (different address spaces) ... Reported-by:
-
David S. Miller authored
Luo bin says: ==================== hinic: add SR-IOV support patch #1 adds mailbox channel support and vf can communicate with pf or hw through it. patch #2 adds support for enabling vf and tx/rx capabilities based on vf. patch #3 adds support for vf's basic configurations. ==================== Signed-off-by: -
Luo bin authored
adds ndo_set_vf_mac/ndo_set_vf_vlan/ndo_get_vf_config and ndo_set_vf_trust to configure netdev of virtual function Signed-off-by:
Luo bin <luobin9@huawei.com> Signed-off-by:
-
Luo bin authored
adds support of basic sriov feature including initialization and tx/rx capabilities of virtual function Signed-off-by:
-
Luo bin authored
virtual function and physical function can communicate with each other through mailbox channel supported by hw Signed-off-by:
-
Zou Wei authored
This fixes the following coccicheck warning: drivers/net/ethernet/mellanox/mlx4/crdump.c:200:2-8: ERROR: missing iounmap; ioremap on line 190 and execution via conditional on line 198 Fixes: 7ef19d3b ("devlink: report error once U32_MAX snapshot ids have been used") Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Zou Wei <zou_wei@huawei.com> Reviewed-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
-
YueHaibing authored
There's no callers in-tree since commit 792b4878 ("dccp: Implement both feature-local and feature-remote Sequence Window feature") Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
-
YueHaibing authored
There's no callers in-tree anymore. Signed-off-by:
-
YueHaibing authored
commit b6334be6 ("net/liquidio: Delete driver version assignment") left behind this, remove it. Signed-off-by:
-
Yang Yingliang authored
The type of loaddr is u8 which is always '<=' 0xff, so the loaddr <= 0xff is always true, we can remove this comparison. Reported-by:
Yang Yingliang <yangyingliang@huawei.com> Reviewed-by:
Vincent Cheng <vincent.cheng.xh@renesas.com> Signed-off-by:
-
Taehee Yoo authored
In the hsr_dev_change_mtu(), the 'dev' and 'master->dev' pointer are same. So, the 'master' variable and some code are unnecessary. Signed-off-by:
Taehee Yoo <ap420073@gmail.com> Signed-off-by:
-
Florian Westphal authored
In MPTCP, the receive window is shared across all subflows, because it refers to the mptcp-level sequence space. MPTCP receivers already place incoming packets on the mptcp socket receive queue and will charge it to the mptcp socket rcvbuf until userspace consumes the data. Update __tcp_select_window to use the occupancy of the parent/mptcp socket instead of the subflow socket in case the tcp socket is part of a logical mptcp connection. This commit doesn't change choice of initial window for passive or active connections. While it would be possible to change those as well, this adds complexity (especially when handling MP_JOIN requests). Furthermore, the MPTCP RFC specifically says that a MPTCP sender 'MUST NOT use the RCV.WND field of a TCP segment at the connection level if it does not also carry a DSS option with a Data ACK field.' SYN/SYNACK packets do not carry a DSS option with a Data ACK field. Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
-
Ioana Ciornei authored
Compute the average number of frames processed for each CDAN (Channel Data Availability Notification) and export it to debugfs detailed channel stats. Signed-off-by:
Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by:
-
Zheng Bin authored
Fixes coccicheck warning: drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.h:312:2-3: Unneeded semicolon Reported-by:
Zheng Bin <zhengbin13@huawei.com> Signed-off-by:
-
Zheng Bin authored
Fixes coccicheck warning: drivers/net/phy/dp83867.c:368:2-3: Unneeded semicolon drivers/net/phy/dp83867.c:403:2-3: Unneeded semicolon Reported-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
David S. Miller authored
Huazhong Tan says: ==================== net: hns3: refactor for MAC table This patchset refactors the MAC table management, configure the MAC address asynchronously, instead of synchronously. Base on this change, it also refines the handle of promisc mode and filter table entries restoring after reset. ==================== Signed-off-by: -
Jian Shen authored
Currently, the PF driver removes all (including its VFs') MAC/VLAN flow director table entries when resetting, and restores them after reset completed. In fact, the hardware will clear all table entries only in IMP reset and global reset. So driver only needs to restore the table entries in these cases, and needs do nothing when PF reset, FLR or other function level reset. This patch optimizes it by removing unnecessary table entries clear and restoring handling in the reset flow, and doing the restoring after reset completed. Signed-off-by:
Jian Shen <shenjian15@huawei.com> Signed-off-by:
-
Jian Shen authored
Currently, the driver use mutex umv_lock to protect the variable vport->share_umv_size. And there is already a mutex vport_lock being defined in the driver, which is designed to protect the resource of vport. So we can use vport_lock instead of umv_lock. Furthermore, there is a time window for protect share_umv_size between checking UMV space and doing MAC configuration in the lin function hclge_add_uc_addr_common(). It should be extended. This patch uses mutex vport_lock intead of spin lock umv_lock to protect share_umv_size, and adjusts the mutex's range. Signed-off-by:
-
Jian Shen authored
As the HNS3 driver doesn't update the MAC address directly in function hns3_set_rx_mode() now, it can't know whether the MAC table is full from __dev_uc_sync() and __dev_mc_sync(), so it's senseless to handle the overflow promisc here. This patch removes the handle of overflow promisc from function hns3_set_rx_mode(), and updates the promisc mode in the service task. Signed-off-by:
-
Jian Shen authored
This patch adds support for dumping entries of UC and MC MAC list, which help checking whether a MAC address being added into hardware or not. Signed-off-by:
-
Jian Shen authored
Currently, the HNS3 driver sync and unsync MAC address in function hns3_set_rx_mode(). For PF, it adds and deletes MAC address directly in the path of dev_set_rx_mode(). If failed, it won't retry until next calling of hns3_set_rx_mode(). On the other hand, if request add and remove a same address many times at a short interval, each request must be done one by one, can't be merged. For VF, it sends mailbox messages to PF to request adding or deleting MAC address in the path of function hns3_set_rx_mode(), no matter the address is configured success. This patch refines it by recording the MAC address in function hns3_set_rx_mode(), and updating MAC address in the service task. If failed, it will retry by the next calling of periodical service task. It also uses some state to mark the state of each MAC address in the MAC list, which can help merge configure request for a same address. With these changes, when global reset or IMP reset occurs, we can restore the MAC table with the MAC list. Signed-off-by:
-
Jian Shen authored
Like the calculation elsewhere, replaces num_req_vfs with num_alloc_vport in hclge_reset_umv_space(). Signed-off-by:
-
Jian Shen authored
Since hclge_set_umv_space() is only called by hclge_init_umv_space(), so parameter 'is_alloc' is redundant. Signed-off-by:
-
Jian Shen authored
Currently, firmware helps manage the unicast MAC VLAN table space for each PF. PF just needs to tell firmware its wanted space when initializing, and unnecessary to free it when un-intializing. So this patch removes the umv space free handle, and removes the forward statement of hclge_set_umv_space() by defining hclge_init_umv_space() after it. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller authored
Simple overlapping changes to linux/vermagic.h Signed-off-by:
-
- 25 Apr, 2020 11 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespaceLinus Torvalds authored
Pull pid leak fix from Eric Biederman: "Oleg noticed that put_pid(thread_pid) was not getting called when proc was not compiled in. Let's get that fixed before 5.7 is released and causes problems for anyone" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: proc: Put thread_pid in release_task not proc_flush_pid
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer fixlet from Ingo Molnar: "A single fix for a comment that may show up in DocBook output" * tag 'timers-urgent-2020-04-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: vdso/datapage: Use correct clock mode name in comment
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fixes from Ingo Molnar: "Misc fixes: - an uclamp accounting fix - three frequency invariance fixes and a readability improvement" * tag 'sched-urgent-2020-04-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/core: Fix reset-on-fork from RT with uclamp x86, sched: Move check for CPU type to caller function x86, sched: Don't enable static key when starting secondary CPUs x86, sched: Account for CPUs with less than 4 cores in freq. invariance x86, sched: Bail out of frequency invariance if base frequency is unknown
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixes from Ingo Molnar: "Two changes: - fix exit event records - extend x86 PMU driver enumeration to add Intel Jasper Lake CPU support" * tag 'perf-urgent-2020-04-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/core: fix parent pid/tid in task exit events perf/x86/cstate: Add Jasper Lake CPU support -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull objtool fixes from Ingo Molnar: "Two fixes: fix an off-by-one bug, and fix 32-bit builds on 64-bit systems" * tag 'objtool-urgent-2020-04-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: objtool: Fix off-by-one in symbol_by_offset() objtool: Fix 32bit cross builds
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Fix memory leak in netfilter flowtable, from Roi Dayan. 2) Ref-count leaks in netrom and tipc, from Xiyu Yang. 3) Fix warning when mptcp socket is never accepted before close, from Florian Westphal. 4) Missed locking in ovs_ct_exit(), from Tonghao Zhang. 5) Fix large delays during PTP synchornization in cxgb4, from Rahul Lakkireddy. 6) team_mode_get() can hang, from Taehee Yoo. 7) Need to use kvzalloc() when allocating fw tracer in mlx5 driver, from Niklas Schnelle. 8) Fix handling of bpf XADD on BTF memory, from Jann Horn. 9) Fix BPF_STX/BPF_B encoding in x86 bpf jit, from Luke Nelson. 10) Missing queue memory release in iwlwifi pcie code, from Johannes Berg. 11) Fix NULL deref in macvlan device event, from Taehee Yoo. 12) Initialize lan87xx phy correctly, from Yuiko Oshino. 13) Fix looping between VRF and XFRM lookups, from David Ahern. 14) etf packet scheduler assumes all sockets are full sockets, which is not necessarily true. From Eric Dumazet. 15) Fix mptcp data_fin handling in RX path, from Paolo Abeni. 16) fib_select_default() needs to handle nexthop objects, from David Ahern. 17) Use GFP_ATOMIC under spinlock in mac80211_hwsim, from Wei Yongjun. 18) vxlan and geneve use wrong nlattr array, from Sabrina Dubroca. 19) Correct rx/tx stats in bcmgenet driver, from Doug Berger. 20) BPF_LDX zero-extension is encoded improperly in x86_32 bpf jit, fix from Luke Nelson. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (100 commits) selftests/bpf: Fix a couple of broken test_btf cases tools/runqslower: Ensure own vmlinux.h is picked up first bpf: Make bpf_link_fops static bpftool: Respect the -d option in struct_ops cmd selftests/bpf: Add test for freplace program with expected_attach_type bpf: Propagate expected_attach_type when verifying freplace programs bpf: Fix leak in LINK_UPDATE and enforce empty old_prog_fd bpf, x86_32: Fix logic error in BPF_LDX zero-extension bpf, x86_32: Fix clobbering of dst for BPF_JSET bpf, x86_32: Fix incorrect encoding in BPF_LDX zero-extension bpf: Fix reStructuredText markup net: systemport: suppress warnings on failed Rx SKB allocations net: bcmgenet: suppress warnings on failed Rx SKB allocations macsec: avoid to set wrong mtu mac80211: sta_info: Add lockdep condition for RCU list usage mac80211: populate debugfs only after cfg80211 init net: bcmgenet: correct per TX/RX ring statistics net: meth: remove spurious copyright text net: phy: bcm84881: clear settings on link down chcr: Fix CPU hard lockup ... -
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller authored
Alexei Starovoitov says: ==================== pull-request: bpf 2020-04-24 The following pull-request contains BPF updates for your *net* tree. We've added 17 non-merge commits during the last 5 day(s) which contain a total of 19 files changed, 203 insertions(+), 85 deletions(-). The main changes are: 1) link_update fix, from Andrii. 2) libbpf get_xdp_id fix, from David. 3) xadd verifier fix, from Jann. 4) x86-32 JIT fixes, from Luke and Wang. 5) test_btf fix, from Stanislav. 6) freplace verifier fix, from Toke. ==================== Signed-off-by: -
Stanislav Fomichev authored
Commit 51c39bb1 ("bpf: Introduce function-by-function verification") introduced function linkage flag and changed the error message from "vlen != 0" to "Invalid func linkage" and broke some fake BPF programs. Adjust the test accordingly. AFACT, the programs don't really need any arguments and only look at BTF for maps, so let's drop the args altogether. Before: BTF raw test[103] (func (Non zero vlen)): do_test_raw:3703:FAIL expected err_str:vlen != 0 magic: 0xeb9f version: 1 flags: 0x0 hdr_len: 24 type_off: 0 type_len: 72 str_off: 72 str_len: 10 btf_total_size: 106 [1] INT (anon) size=4 bits_offset=0 nr_bits=32 encoding=SIGNED [2] INT (anon) size=4 bits_offset=0 nr_bits=32 encoding=(none) [3] FUNC_PROTO (anon) return=0 args=(1 a, 2 b) [4] FUNC func type_id=3 Invalid func linkage BTF libbpf test[1] (test_btf_haskv.o): libbpf: load bpf program failed: Invalid argument libbpf: -- BEGIN DUMP LOG --- libbpf: Validating test_long_fname_2() func#1... Arg#0 type PTR in test_long_fname_2() is not supported yet. processed 0 insns (limit 1000000) max_states_per_insn 0 total_states 0 peak_states 0 mark_read 0 libbpf: -- END LOG -- libbpf: failed to load program 'dummy_tracepoint' libbpf: failed to load object 'test_btf_haskv.o' do_test_file:4201:FAIL bpf_object__load: -4007 BTF libbpf test[2] (test_btf_newkv.o): libbpf: load bpf program failed: Invalid argument libbpf: -- BEGIN DUMP LOG --- libbpf: Validating test_long_fname_2() func#1... Arg#0 type PTR in test_long_fname_2() is not supported yet. processed 0 insns (limit 1000000) max_states_per_insn 0 total_states 0 peak_states 0 mark_read 0 libbpf: -- END LOG -- libbpf: failed to load program 'dummy_tracepoint' libbpf: failed to load object 'test_btf_newkv.o' do_test_file:4201:FAIL bpf_object__load: -4007 BTF libbpf test[3] (test_btf_nokv.o): libbpf: load bpf program failed: Invalid argument libbpf: -- BEGIN DUMP LOG --- libbpf: Validating test_long_fname_2() func#1... Arg#0 type PTR in test_long_fname_2() is not supported yet. processed 0 insns (limit 1000000) max_states_per_insn 0 total_states 0 peak_states 0 mark_read 0 libbpf: -- END LOG -- libbpf: failed to load program 'dummy_tracepoint' libbpf: failed to load object 'test_btf_nokv.o' do_test_file:4201:FAIL bpf_object__load: -4007 Fixes: 51c39bb1 ("bpf: Introduce function-by-function verification") Signed-off-by:
Stanislav Fomichev <sdf@google.com> Signed-off-by:
Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200422003753.124921-1-sdf@google.com
-
Andrii Nakryiko authored
Reorder include paths to ensure that runqslower sources are picking up vmlinux.h, generated by runqslower's own Makefile. When runqslower is built from selftests/bpf, due to current -I$(BPF_INCLUDE) -I$(OUTPUT) ordering, it might pick up not-yet-complete vmlinux.h, generated by selftests Makefile, which could lead to compilation errors like [0]. So ensure that -I$(OUTPUT) goes first and rely on runqslower's Makefile own dependency chain to ensure vmlinux.h is properly completed before source code relying on it is compiled. [0] https://travis-ci.org/github/libbpf/libbpf/jobs/677905925Signed-off-by:
Andrii Nakryiko <andriin@fb.com> Signed-off-by:
-
Zou Wei authored
Fix the following sparse warning: kernel/bpf/syscall.c:2289:30: warning: symbol 'bpf_link_fops' was not declared. Should it be static? Reported-by:
-
Martin KaFai Lau authored
In the prog cmd, the "-d" option turns on the verifier log. This is missed in the "struct_ops" cmd and this patch fixes it. Fixes: 65c93628 ("bpftool: Add struct_ops support") Signed-off-by:
Martin KaFai Lau <kafai@fb.com> Signed-off-by:
Quentin Monnet <quentin@isovalent.com> Link: https://lore.kernel.org/bpf/20200424182911.1259355-1-kafai@fb.com
-
