- 15 Sep, 2016 13 commits
-
-
Jan Beulich authored
[ Upstream commit be06998f ] The combined effect of commits 6423fc34 ("igb: do not re-init SR-IOV during probe") and ceee3450 ("igb: make sure SR-IOV init uses the right number of queues") causes VFs no longer getting set up, leading to NULL pointer dereferences due to the adapter's ->vf_data being NULL while ->vfs_allocated_count is non-zero. The first commit not only neglected the side effect of igb_sriov_reinit() that the second commit tried to account for, but also that of setting IGB_FLAG_HAS_MSIX, without which igb_enable_sriov() is effectively a no-op. Calling igb_{,re}set_interrupt_capability() as done here seems to address this, but I'm not sure whether this is better than sinply reverting the other two commits. Signed-off-by:
Jan Beulich <jbeulich@suse.com> Tested-by:
Aaron Brown <aaron.f.brown@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
Sasha Levin <alexander.levin@verizon.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Todd Fujinaka authored
[ Upstream commit 08c99129 ] The i210 has two EEPROM access registers that are located in non-standard offsets: EEARBC and EEMNGCTL. EEARBC was fixed previously and EEMNGCTL should also be corrected. Reported-by:
Roman Hodek <roman.aud@siemens.com> Signed-off-by:
Todd Fujinaka <todd.fujinaka@intel.com> Tested-by:
-
Jarod Wilson authored
[ Upstream commit 73bf8048 ] I've got a startech thunderbolt dock someone loaned me, which among other things, has the following device in it: 08:00.0 Ethernet controller: Intel Corporation I210 Gigabit Network Connection (rev 03) This hotplugs just fine (kernel 4.2.0 plus a patch or two here): [ 863.020315] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.2.18-k [ 863.020316] igb: Copyright (c) 2007-2014 Intel Corporation. [ 863.028657] igb 0000:08:00.0: enabling device (0000 -> 0002) [ 863.062089] igb 0000:08:00.0: added PHC on eth0 [ 863.062090] igb 0000:08:00.0: Intel(R) Gigabit Ethernet Network Connection [ 863.062091] igb 0000:08:00.0: eth0: (PCIe:2.5Gb/s:Width x1) e8:ea:6a:00:1b:2a [ 863.062194] igb 0000:08:00.0: eth0: PBA No: 000200-000 [ 863.062196] igb 0000:08:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 863.064889] igb 0000:08:00.0 enp8s0: renamed from eth0 But disconnecting it is another story: [ 1002.807932] igb 0000:08:00.0: removed PHC on enp8s0 [ 1002.807944] igb 0000:08:00.0 enp8s0: PCIe link lost, device now detached [ 1003.341141] ------------[ cut here ]------------ [ 1003.341148] WARNING: CPU: 0 PID: 199 at lib/iomap.c:43 bad_io_access+0x38/0x40() [ 1003.341149] Bad IO access at port 0x0 () [ 1003.342767] Modules linked in: snd_usb_audio snd_usbmidi_lib snd_rawmidi igb dca firewire_ohci firewire_core crc_itu_t rfcomm ctr ccm arc4 iwlmvm mac80211 fuse xt_CHECKSUM ipt_MASQUERADE nf_nat_masquerade_ipv4 tun ip6t_rpfilter ip6t_REJECT nf_reject_ipv6 ipt_REJECT nf_reject_ipv4 xt_conntrack ebtable_nat ebtable_broute bridge stp llc ebtable_filter ebtables ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 ip6table_mangle ip6table_security ip6table_raw ip6table_filter ip6_tables iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack iptable_mangle iptable_security iptable_raw iptable_filter bnep dm_mirror dm_region_hash dm_log dm_mod coretemp x86_pkg_temp_thermal intel_powerclamp kvm_intel snd_hda_codec_hdmi kvm crct10dif_pclmul crc32_pclmul ghash_clmulni_intel drbg [ 1003.342793] ansi_cprng aesni_intel hp_wmi aes_x86_64 iTCO_wdt lrw iTCO_vendor_support ppdev gf128mul sparse_keymap glue_helper ablk_helper cryptd snd_hda_codec_realtek snd_hda_codec_generic microcode snd_hda_intel uvcvideo iwlwifi snd_hda_codec videobuf2_vmalloc videobuf2_memops snd_hda_core videobuf2_core snd_hwdep btusb v4l2_common btrtl snd_seq btbcm btintel videodev cfg80211 snd_seq_device rtsx_pci_ms bluetooth pcspkr input_leds i2c_i801 media parport_pc memstick rfkill sg lpc_ich snd_pcm 8250_fintek parport joydev snd_timer snd soundcore hp_accel ie31200_edac mei_me lis3lv02d edac_core input_polldev mei hp_wireless shpchp tpm_infineon sch_fq_codel nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables autofs4 xfs libcrc32c sd_mod sr_mod cdrom rtsx_pci_sdmmc mmc_core crc32c_intel serio_raw rtsx_pci [ 1003.342822] nouveau ahci libahci mxm_wmi e1000e xhci_pci hwmon ptp drm_kms_helper pps_core xhci_hcd ttm wmi video ipv6 [ 1003.342839] CPU: 0 PID: 199 Comm: kworker/0:2 Not tainted 4.2.0-2.el7_UNSUPPORTED.x86_64 #1 [ 1003.342840] Hardware name: Hewlett-Packard HP ZBook 15 G2/2253, BIOS M70 Ver. 01.07 02/26/2015 [ 1003.342843] Workqueue: pciehp-3 pciehp_power_thread [ 1003.342844] ffffffff81a90655 ffff8804866d3b48 ffffffff8164763a 0000000000000000 [ 1003.342846] ffff8804866d3b98 ffff8804866d3b88 ffffffff8107134a ffff8804866d3b88 [ 1003.342847] ffff880486f46000 ffff88046c8a8000 ffff880486f46840 ffff88046c8a8098 [ 1003.342848] Call Trace: [ 1003.342852] [<ffffffff8164763a>] dump_stack+0x45/0x57 [ 1003.342855] [<ffffffff8107134a>] warn_slowpath_common+0x8a/0xc0 [ 1003.342857] [<ffffffff810713c6>] warn_slowpath_fmt+0x46/0x50 [ 1003.342859] [<ffffffff8133719e>] ? pci_disable_msix+0x3e/0x50 [ 1003.342860] [<ffffffff812f6328>] bad_io_access+0x38/0x40 [ 1003.342861] [<ffffffff812f6567>] pci_iounmap+0x27/0x40 [ 1003.342865] [<ffffffffa0b728d7>] igb_remove+0xc7/0x160 [igb] [ 1003.342867] [<ffffffff8132189f>] pci_device_remove+0x3f/0xc0 [ 1003.342869] [<ffffffff81433426>] __device_release_driver+0x96/0x130 [ 1003.342870] [<ffffffff814334e3>] device_release_driver+0x23/0x30 [ 1003.342871] [<ffffffff8131b404>] pci_stop_bus_device+0x94/0xa0 [ 1003.342872] [<ffffffff8131b3ad>] pci_stop_bus_device+0x3d/0xa0 [ 1003.342873] [<ffffffff8131b3ad>] pci_stop_bus_device+0x3d/0xa0 [ 1003.342874] [<ffffffff8131b516>] pci_stop_and_remove_bus_device+0x16/0x30 [ 1003.342876] [<ffffffff81333f5b>] pciehp_unconfigure_device+0x9b/0x180 [ 1003.342877] [<ffffffff81333a73>] pciehp_disable_slot+0x43/0xb0 [ 1003.342878] [<ffffffff81333b6d>] pciehp_power_thread+0x8d/0xb0 [ 1003.342885] [<ffffffff810881b2>] process_one_work+0x152/0x3d0 [ 1003.342886] [<ffffffff8108854a>] worker_thread+0x11a/0x460 [ 1003.342887] [<ffffffff81088430>] ? process_one_work+0x3d0/0x3d0 [ 1003.342890] [<ffffffff8108ddd9>] kthread+0xc9/0xe0 [ 1003.342891] [<ffffffff8108dd10>] ? kthread_create_on_node+0x180/0x180 [ 1003.342893] [<ffffffff8164e29f>] ret_from_fork+0x3f/0x70 [ 1003.342894] [<ffffffff8108dd10>] ? kthread_create_on_node+0x180/0x180 [ 1003.342895] ---[ end trace 65a77e06d5aa9358 ]--- Upon looking at the igb driver, I see that igb_rd32() attempted to read from hw_addr and failed, so it set hw->hw_addr to NULL and spit out the message in the log output above, "PCIe link lost, device now detached". Well, now that hw_addr is NULL, the attempt to call pci_iounmap is obviously not going to go well. As suggested by Mark Rustad, do something similar to what ixgbe does, and save a copy of hw_addr as adapter->io_addr, so we can still call pci_iounmap on it on teardown. Additionally, for consistency, make the pci_iomap call assignment directly to io_addr, so map and unmap match. Signed-off-by:
Jarod Wilson <jarod@redhat.com> Tested-by:
-
Anjali Singhai Jain authored
[ Upstream commit 857942fd ] If the driver calls skb_set_hash even with a zero hash, that indicates to the stack that the hash calculation is offloaded in hardware. So the Stack doesn't do a SW hash which is required for load balancing if the user decides to turn of rx-hashing on our device. This patch fixes the path so that we do not call skb_set_hash if the feature is disabled. Change-ID: Ic4debfa4ff91b5a72e447348a75768ed7a2d3e1b Signed-off-by:
Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
-
Shannon Nelson authored
[ Upstream commit f1199998 ] Clean the whole mac filter list when resetting after an intermediate add or delete push to the firmware. The code had evolved from using a list from the stack to a heap allocation, but the memset() didn't follow the change correctly. This now cleans the whole list rather that just part of the first element. Change-ID: I4cd03d5a103b7407dd8556a3a231e800f2d6f2d5 Reported-by:
Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by:
Shannon Nelson <shannon.nelson@intel.com> Tested-by:
-
Mitch Williams authored
[ Upstream commit fdb47ae8 ] If the driver gets unloaded during reset recovery, it's possible that it will attempt to free resources when they're already free. Add a check to make sure that the Tx and Rx rings actually exist before dereferencing them to free resources. Change-ID: I4d2b7e9ede49f634d421a4c5deaa5446bc755eee Signed-off-by:
Mitch Williams <mitch.a.williams@intel.com> Tested-by:
-
Mitch Williams authored
[ Upstream commit b7b713a8 ] When VFs are created, the MAC address defaults to all zeros, indicating to the VF driver that it should use a random MAC address. However, the PF driver was incorrectly adding this zero MAC to the filter table, along with the VF's randomly generated MAC address. Check for a good address before adding the default filter. While we're at it, make the error message a bit more useful. Change-ID: Ia100947d68140e0f73a19ba755cbffc3e79a8fcf Signed-off-by:
-
Mitch Williams authored
[ Upstream commit b36e9ab5 ] The virtual channel interface was using incorrect semantics to remove MAC addresses, which would leave incorrect filters active when using VLANs. To correct this, add a new function that unconditionally removes MAC addresses from all VLANs, and call this function when the VF requests a MAC filter removal. Change-ID: I69826908ae4f6c847f5bf9b32f11faa760189c74 Signed-off-by:
-
Kiran Patil authored
[ Upstream commit a42e7a36 ] This patch fixes the memory leak which would be seen otherwise when user programs flow-director filter using ethtool (sideband filter programming). When ethtool is used to program flow directory filter, 'raw_buf' gets allocated and it is supposed to be freed as part of queue cleanup. But check of 'tx_buffer->skb' was preventing it from being freed. Change-ID: Ief4f0a1a32a653180498bf6e987c1b4342ab8923 Signed-off-by:
Kiran Patil <kiran.patil@intel.com> Tested-by:
-
Jesse Brandeburg authored
[ Upstream commit 0e4425ed ] The driver was being called by VLAN, bonding, teaming operations that expected to be able to hold locks like rcu_read_lock(). This causes the driver to be held to the requirement to not sleep, and was found by the kernel debug options for checking sleep inside critical section, and the locking validator. Change-ID: Ibc68c835f5ffa8ffe0638ffe910a66fc5649a7f7 Signed-off-by:
Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by:
-
Anjali Singhai Jain authored
[ Upstream commit 6a7fded7 ] This patch fixes the issue of forcing WB too often causing us to not benefit from NAPI. Without this patch we were forcing WB/arming interrupt too often taking away the benefits of NAPI and causing a performance impact. With this patch we disable force WB in the clean routine for X710 and XL710 adapters. X722 adapters do not enable interrupt to force a WB and benefit from WB_ON_ITR and hence force WB is left enabled for those adapters. For XL710 and X710 adapters if we have less than 4 packets pending a software Interrupt triggered from service task will force a WB. This patch also changes the conditions for setting RS bit as described in code comments. This optimizes when the HW does a tail bump amd when it does a WB. It also optimizes when we do a wmb. Change-ID: Id831e1ae7d3e2ec3f52cd0917b41ce1d22d75d9d Signed-off-by:
-
Mitch Williams authored
[ Upstream commit 1418c345 ] When a lot (many hundreds) of MAC or VLAN filters are added at one time, we can overflow the Admin Queue buffer size with all the requests. Unfortunately, the driver would then calculate the message size incorrectly, causing it to be rejected by the PF. Furthermore, there was no mechanism to trigger another request to allow for configuring the rest of the filters that didn't fit into the first request. To fix this, recalculate the correct buffer size when we detect the overflow condition instead of just assuming the max buffer size. Also, don't clear the request bit in adapter->aq_required when we have an overflow, so that the rest of the filters can be processed later. Change-ID: Idd7cbbc5af31315e0dcb1b10e6a02ad9817ce65c Signed-off-by:
-
Anjali Singhai Jain authored
[ Upstream commit 4f2f017c ] HW/NVM sets a limit of no less than 256 bytes for MSS. Stack can send as low as 76 bytes MSS. This patch lowers the HW limit to 64 bytes to avoid MDDs from firing and causing a reset when the MSS is lower than 256. Change-ID: I36b500a6bb227d283c3e321a7718e0672b11fab0 Signed-off-by:
-
- 07 Sep, 2016 27 commits
-
-
Greg Kroah-Hartman authored
-
Konstantin Khlebnikov authored
commit 17d0774f upstream. Attributes declared with __ATTR_PREALLOC use sysfs_kf_read() which returns zero bytes for non-zero offset. This breaks script checkarray in mdadm tool in debian where /bin/sh is 'dash' because its builtin 'read' reads only one byte at a time. Script gets 'i' instead of 'idle' when reads current action from /sys/block/$dev/md/sync_action and as a result does nothing. This patch adds trivial implementation of partial read: generate whole string and move required part into buffer head. Signed-off-by:
Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Fixes: 4ef67a8c ("sysfs/kernfs: make read requests on pre-alloc files use the buffer.") Link: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=787950Acked-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Quentin Schulz authored
commit 5d17d3b4 upstream. The "name" variable's memory is now freed when the device is destructed thanks to devm function. Signed-off-by:
Quentin Schulz <quentin.schulz@free-electrons.com> Reported-by:
Guenter Roeck <linux@roeck-us.net> Fixes: e0f8a24e ("staging:iio::hwmon interface client driver.") Fixes: 61bb53bc ("hwmon: (iio_hwmon) Add support for humidity sensors") Signed-off-by:
-
Andrej Krutak authored
commit b027d112 upstream. The commit 02fc76f6 changed base of the sysfs attributes from device to card. The "show" callbacks dereferenced wrong objects because of this. Fixes: 02fc76f6 ('ALSA: line6: Create sysfs via snd_card_add_dev_attr()') Reviewed-by:
Stefan Hajnoczi <stefanha@gmail.com> Signed-off-by:
Andrej Krutak <dev@andree.sk> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Andrej Krutak authored
commit adc8a43a upstream. Done, because line6_stream_stop() locks and calls line6_unlink_audio_urbs(), which in turn invokes audio_out_callback(), which tries to lock 2nd time. Fixes: ============================================= [ INFO: possible recursive locking detected ] 4.4.15+ #15 Not tainted --------------------------------------------- mplayer/3591 is trying to acquire lock: (&(&line6pcm->out.lock)->rlock){-.-...}, at: [<bfa27655>] audio_out_callback+0x70/0x110 [snd_usb_line6] but task is already holding lock: (&(&line6pcm->out.lock)->rlock){-.-...}, at: [<bfa26aad>] line6_stream_stop+0x24/0x5c [snd_usb_line6] other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&(&line6pcm->out.lock)->rlock); lock(&(&line6pcm->out.lock)->rlock); *** DEADLOCK *** May be due to missing lock nesting notation 3 locks held by mplayer/3591: #0: (snd_pcm_link_rwlock){.-.-..}, at: [<bf8d49a7>] snd_pcm_stream_lock+0x1e/0x40 [snd_pcm] #1: (&(&substream->self_group.lock)->rlock){-.-...}, at: [<bf8d49af>] snd_pcm_stream_lock+0x26/0x40 [snd_pcm] #2: (&(&line6pcm->out.lock)->rlock){-.-...}, at: [<bfa26aad>] line6_stream_stop+0x24/0x5c [snd_usb_line6] stack backtrace: CPU: 0 PID: 3591 Comm: mplayer Not tainted 4.4.15+ #15 Hardware name: Generic AM33XX (Flattened Device Tree) [<c0015d85>] (unwind_backtrace) from [<c001253d>] (show_stack+0x11/0x14) [<c001253d>] (show_stack) from [<c02f1bdf>] (dump_stack+0x8b/0xac) [<c02f1bdf>] (dump_stack) from [<c0076f43>] (__lock_acquire+0xc8b/0x1780) [<c0076f43>] (__lock_acquire) from [<c007810d>] (lock_acquire+0x99/0x1c0) [<c007810d>] (lock_acquire) from [<c06171e7>] (_raw_spin_lock_irqsave+0x3f/0x4c) [<c06171e7>] (_raw_spin_lock_irqsave) from [<bfa27655>] (audio_out_callback+0x70/0x110 [snd_usb_line6]) [<bfa27655>] (audio_out_callback [snd_usb_line6]) from [<c04294db>] (__usb_hcd_giveback_urb+0x53/0xd0) [<c04294db>] (__usb_hcd_giveback_urb) from [<c046388d>] (musb_giveback+0x3d/0x98) [<c046388d>] (musb_giveback) from [<c04647f5>] (musb_urb_dequeue+0x6d/0x114) [<c04647f5>] (musb_urb_dequeue) from [<c042ac11>] (usb_hcd_unlink_urb+0x39/0x98) [<c042ac11>] (usb_hcd_unlink_urb) from [<bfa26a87>] (line6_unlink_audio_urbs+0x6a/0x6c [snd_usb_line6]) [<bfa26a87>] (line6_unlink_audio_urbs [snd_usb_line6]) from [<bfa26acb>] (line6_stream_stop+0x42/0x5c [snd_usb_line6]) [<bfa26acb>] (line6_stream_stop [snd_usb_line6]) from [<bfa26fe7>] (snd_line6_trigger+0xb6/0xf4 [snd_usb_line6]) [<bfa26fe7>] (snd_line6_trigger [snd_usb_line6]) from [<bf8d47b7>] (snd_pcm_do_stop+0x36/0x38 [snd_pcm]) [<bf8d47b7>] (snd_pcm_do_stop [snd_pcm]) from [<bf8d462f>] (snd_pcm_action_single+0x22/0x40 [snd_pcm]) [<bf8d462f>] (snd_pcm_action_single [snd_pcm]) from [<bf8d46f9>] (snd_pcm_action+0xac/0xb0 [snd_pcm]) [<bf8d46f9>] (snd_pcm_action [snd_pcm]) from [<bf8d4b61>] (snd_pcm_drop+0x38/0x64 [snd_pcm]) [<bf8d4b61>] (snd_pcm_drop [snd_pcm]) from [<bf8d6233>] (snd_pcm_common_ioctl1+0x7fe/0xbe8 [snd_pcm]) [<bf8d6233>] (snd_pcm_common_ioctl1 [snd_pcm]) from [<bf8d6779>] (snd_pcm_playback_ioctl1+0x15c/0x51c [snd_pcm]) [<bf8d6779>] (snd_pcm_playback_ioctl1 [snd_pcm]) from [<bf8d6b59>] (snd_pcm_playback_ioctl+0x20/0x28 [snd_pcm]) [<bf8d6b59>] (snd_pcm_playback_ioctl [snd_pcm]) from [<c016714b>] (do_vfs_ioctl+0x3af/0x5c8) Fixes: 63e20df1 ('ALSA: line6: Reorganize PCM stream handling') Reviewed-by:
-
Andrej Krutak authored
commit 7e4379ea upstream. If there's an error, pcm is released in line6_pcm_acquire already. Fixes: 247d95ee ('ALSA: line6: Handle error from line6_pcm_acquire()') Reviewed-by:
-
Lukasz Anaczkowski authored
commit 702b07fc upstream. SRAT maps APIC ID to proximity domains ids (PXM). Mapping from PXM to NUMA node ids is based on order of entries in SRAT table. SRAT table has just LAPIC entires or mix of LAPIC and X2APIC entries. As long as there are only LAPIC entires, mapping from proximity domain id to NUMA node id is as assumed by BIOS. However, once APIC entries are mixed, X2APIC entries would be first mapped which causes unexpected NUMA node mapping. To fix that, change parsing to check each entry against both LAPIC and X2APIC so mapping is in the SRAT/PXM order. This is supplemental change to the fix made by commit d81056b5 (Handle apic/x2apic entries in MADT in correct order) and using the mechanism introduced by 9b3fedde (ACPI / tables: Add acpi_subtable_proc to ACPI table parsers). Fixes: d81056b5 (Handle apic/x2apic entries in MADT in correct order) Signed-off-by:
Lukasz Anaczkowski <lukasz.anaczkowski@intel.com> [ rjw : Subject & changelog ] Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Dan Carpenter authored
commit f18ebc21 upstream. The problem with ornamental, do-nothing gotos is that they lead to "forgot to set the error code" bugs. We should be returning -EINVAL here but we don't. It leads to an uninitalized variable in counter_show(): drivers/acpi/sysfs.c:603 counter_show() error: uninitialized symbol 'status'. Fixes: 1c8fce27 (ACPI: introduce drivers/acpi/sysfs.c) Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Lorenzo Pieralisi authored
commit 5331d9ca upstream. Commit e647b532 ("ACPI: Add early device probing infrastructure") introduced code that allows inserting driver specific struct acpi_probe_entry probe entries into ACPI linker sections (one per-subsystem, eg irqchip, clocksource) that are then walked to retrieve the data and function hooks required to probe the respective kernel components. Probing for all entries in a section is triggered through the __acpi_probe_device_table() function, that in turn, according to the table ID a given probe entry reports parses the table with the function retrieved from the respective section structures (ie struct acpi_probe_entry). Owing to the current ACPI table parsing implementation, the __acpi_probe_device_table() function has to share global variables with the acpi_match_madt() function, so in order to guarantee mutual exclusion locking is required between the two functions. Current kernel code implements the locking through the acpi_probe_lock spinlock; this has the side effect of requiring all code called within the lock (ie struct acpi_probe_entry.probe_{table/subtbl} hooks) not to sleep. However, kernel subsystems that make use of the early probing infrastructure are relying on kernel APIs that may sleep (eg irq_domain_alloc_fwnode(), among others) in the function calls pointed at by struct acpi_probe_entry.{probe_table/subtbl} entries (eg gic_v2_acpi_init()), which is a bug. Since __acpi_probe_device_table() is called from context that is allowed to sleep the acpi_probe_lock spinlock can be replaced with a mutex; this fixes the issue whilst still guaranteeing mutual exclusion. Signed-off-by:
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Fixes: e647b532 (ACPI: Add early device probing infrastructure) Signed-off-by:
-
Lorenzo Pieralisi authored
commit 3feab13c upstream. When the ACPI_DECLARE_PROBE_ENTRY macro was added in commit e647b532 ("ACPI: Add early device probing infrastructure"), a stub macro adding an unused entry was added for the !CONFIG_ACPI Kconfig option case to make sure kernel code making use of the macro did not require to be guarded within CONFIG_ACPI in order to be compiled. The stub macro was never used since all kernel code that defines ACPI_DECLARE_PROBE_ENTRY entries is currently guarded within CONFIG_ACPI; it contains a typo that should be nonetheless fixed. Fix the typo in the stub (ie !CONFIG_ACPI) ACPI_DECLARE_PROBE_ENTRY() macro so that it can actually be used if needed. Signed-off-by:
-
Ian Abbott authored
commit 5ca05345 upstream. For counter subdevices, the `s->insn_write` handler is being set to the wrong function, `ni_tio_insn_read()`. It should be `ni_tio_insn_write()`. Signed-off-by:
Ian Abbott <abbotti@mev.co.uk> Reported-by:
Éric Piel <piel@delmic.com> Fixes: 10f74377 ("staging: comedi: ni_tio: make ni_tio_winsn() a proper comedi (*insn_write)" Signed-off-by:
-
Ian Abbott authored
commit f0f4b0cc upstream. Commit ebb657ba ("staging: comedi: ni_mio_common: clarify the cmd->start_arg validation and use") introduced a backwards compatibility issue in the use of asynchronous commands on the AO subdevice when `start_src` is `TRIG_EXT`. Valid values for `start_src` are `TRIG_INT` (for internal, software trigger), and `TRIG_EXT` (for external trigger). When set to `TRIG_EXT`. In both cases, the driver relies on an internal, software trigger to set things up (allowing the user application to write sufficient samples to the data buffer before the trigger), so it acts as a software "pre-trigger" in the `TRIG_EXT` case. The software trigger is handled by `ni_ao_inttrig()`. Prior to the above change, when `start_src` was `TRIG_INT`, `start_arg` was required to be 0, and `ni_ao_inttrig()` checked that the software trigger number was also 0. After the above change, when `start_src` was `TRIG_INT`, any value was allowed for `start_arg`, and `ni_ao_inttrig()` checked that the software trigger number matched this `start_arg` value. The backwards compatibility issue is that the internal trigger number now has to match `start_arg` when `start_src` is `TRIG_EXT` when it previously had to be 0. Fix the backwards compatibility issue in `ni_ao_inttrig()` by always allowing software trigger number 0 when `start_src` is something other than `TRIG_INT`. Thanks to Spencer Olson for reporting the issue. Signed-off-by:
Spencer Olson <olsonse@umich.edu> Fixes: ebb657ba ("staging: comedi: ni_mio_common: clarify the cmd->start_arg validation and use") Reviewed-by:
H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by:
-
Ian Abbott authored
commit 403fe7f3 upstream. Commit 73e0e4df ("staging: comedi: comedi_test: fix timer lock-up") fixed a lock-up in the timer routine `waveform_ai_timer()` (which was called `waveform_ai_interrupt()` at the time) caused by commit 24051247 ("staging: comedi: comedi_test: use comedi_handle_events()"). However, it introduced a race condition that can result in the timer routine misbehaving, such as accessing freed memory or dereferencing a NULL pointer. 73e0... changed the timer routine to do nothing unless a `WAVEFORM_AI_RUNNING` flag was set, and changed `waveform_ai_cancel()` to clear the flag and replace a call to `del_timer_sync()` with a call to `del_timer()`. `waveform_ai_cancel()` may be called from the timer routine itself (via `comedi_handle_events()`), or from `do_cancel()`. (`do_cancel()` is called as a result of a file operation (usually a `COMEDI_CANCEL` ioctl command, or a release), or during device removal.) When called from `do_cancel()`, the call to `waveform_ai_cancel()` is followed by a call to `do_become_nonbusy()`, which frees up stuff for the current asynchronous command under the assumption that it is now safe to do so. The race condition occurs when the timer routine `waveform_ai_timer()` checks the `WAVEFORM_AI_RUNNING` flag just before it is cleared by `waveform_ai_cancel()`, and is still running during the call to `do_become_nonbusy()`. In particular, it can lead to a NULL pointer dereference: BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffffc0c63add>] waveform_ai_timer+0x17d/0x290 [comedi_test] That corresponds to this line in `waveform_ai_timer()`: unsigned int chanspec = cmd->chanlist[async->cur_chan]; but `do_become_nonbusy()` frees `cmd->chanlist` and sets it to `NULL`. Fix the race by calling `del_timer_sync()` instead of `del_timer()` in `waveform_ai_cancel()` when not in an interrupt context. The only time `waveform_ai_cancel()` is called in an interrupt context is when it is called from the timer routine itself, via `comedi_handle_events()`. There is no longer any need for the `WAVEFORM_AI_RUNNING` flag, so get rid of it. The bug was copied from the AI subdevice to the AO when support for commands on the AO subdevice was added by commit 0cf55bbe ("staging: comedi: comedi_test: implement commands on AO subdevice"). That involves the timer routine `waveform_ao_timer()`, the comedi "cancel" routine `waveform_ao_cancel()`, and the flag `WAVEFORM_AO_RUNNING`. Fix it in the same way as for the AI subdevice. Fixes: 73e0e4df ("staging: comedi: comedi_test: fix timer lock-up") Fixes: 0cf55bbe ("staging: comedi: comedi_test: implement commands on AO subdevice") Reported-by:
-
Ian Abbott authored
commit 80e162ee upstream. `daqboard2000_find_boardinfo()` is supposed to check if the DaqBoard/2000 series model is supported, based on the PCI subvendor and subdevice ID. The current code is wrong as it is comparing the PCI device's subdevice ID to an expected, fixed value for the subvendor ID. It should be comparing the PCI device's subvendor ID to this fixed value. Correct it. Fixes: 7e8401b2 ("staging: comedi: daqboard2000: add back subsystem_device check") Signed-off-by:
-
Aleksandr Makarov authored
commit 40d9c325 upstream. These product IDs are listed in Windows driver. 0x6803 corresponds to WeTelecom WM-D300. 0x6802 name is unknown. Signed-off-by:
Aleksandr Makarov <aleksandr.o.makarov@gmail.com> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Aleksandr Makarov authored
commit 6695593e upstream. Add support for WeTelecom WM-D200. T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=22de ProdID=6801 Rev=00.00 S: Manufacturer=WeTelecom Incorporated S: Product=WeTelecom Mobile Products C: #Ifs= 4 Cfg#= 1 Atr=80 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#= 3 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage Signed-off-by:
-
Alexey Khoroshilov authored
commit 3b7c7e52 upstream. There is an allocation with GFP_KERNEL flag in mos7840_write(), while it may be called from interrupt context. Follow-up for commit 19125283 ("USB: kobil_sct: fix non-atomic allocation in write path") Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by:
-
Alexey Khoroshilov authored
commit 5a5a1d61 upstream. There is an allocation with GFP_KERNEL flag in mos7720_write(), while it may be called from interrupt context. Follow-up for commit 19125283 ("USB: kobil_sct: fix non-atomic allocation in write path") Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
-
Alan Stern authored
commit 6c73358c upstream. The maximum value allowed for wMaxPacketSize of a high-speed interrupt endpoint is 1024 bytes, not 1023. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Fixes: aed9d65a ("USB: validate wMaxPacketValue entries in endpoint descriptors") Signed-off-by:
-
Li Jun authored
commit c4e94174 upstream. When the controller is configured to be dual role and it's in host mode, if bind udc and gadgt driver, those gadget operations will do gadget disconnect and finally pull down DP line, which will break host function. Signed-off-by:
Li Jun <jun.li@nxp.com> Signed-off-by:
Peter Chen <peter.chen@nxp.com> Signed-off-by:
-
Alan Stern authored
commit 53e5f36f upstream. UBSAN complains about a left shift by -1 in proc_do_submiturb(). This can occur when an URB is submitted for a bulk or control endpoint on a high-speed device, since the code doesn't bother to check the endpoint type; normally only interrupt or isochronous endpoints have a nonzero bInterval value. Aside from the fact that the operation is illegal, it shouldn't matter because the result isn't used. Still, in theory it could cause a hardware exception or other problem, so we should work around it. This patch avoids doing the left shift unless the shift amount is >= 0. The same piece of code has another problem. When checking the device speed (the exponential encoding for interrupt endpoints is used only by high-speed or faster devices), we need to look for speed >= USB_SPEED_SUPER as well as speed == USB_SPEED HIGH. The patch adds this check. Signed-off-by:
Vittorio Zecca <zeccav@gmail.com> Tested-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
-
Yoshihiro Shimoda authored
commit 626d2f07 upstream. The USB-DMAC's interruption happens even if the CHCR.DE is not set to 1 because CHCR.NULLE is set to 1. So, this driver should call usb_dmac_isr_transfer_end() if the DE bit is set to 1 only. Otherwise, the desc is possible to be NULL in the usb_dmac_isr_transfer_end(). Fixes: 0c1c8ff3 ("dmaengine: usb-dmac: Add Renesas USB DMA Controller (USB-DMAC) driver) Signed-off-by:
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by:
Vinod Koul <vinod.koul@intel.com> Signed-off-by:
-
Giovanni Cabiddu authored
commit 10bb087c upstream. Increase value of supported key sizes for qat_aes_xts. aes-xts keys consists of keys of equal size concatenated. Fixes: def14bfa ("crypto: qat - add support for ctr(aes) and xts(aes)") Reported-by:
Wenqian Yu <wenqian.yu@intel.com> Signed-off-by:
Giovanni Cabiddu <giovanni.cabiddu@intel.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Dan Carpenter authored
commit e514cc0a upstream. The props->ap[] array is defined like this: struct alg_props ap[NX_MAX_FC][NX_MAX_MODE][3]; So we can see that if msc->fc and msc->mode are == to NX_MAX_FC or NX_MAX_MODE then we're off by one. Fixes: ae0222b7 ('powerpc/crypto: nx driver code supporting nx encryption') Signed-off-by:
-
Dmitry Torokhov authored
commit 47af45d6 upstream. The commit 40974618 ("Input: i8042 - break load dependency ...") correctly set up ps2_cmd_mutex pointer for the KBD port but forgot to do the same for AUX port(s), which results in communication on KBD and AUX ports to clash with each other. Fixes: 40974618 ("Input: i8042 - break load dependency ...") Reported-by:
Bruno Wolff III <bruno@wolff.to> Tested-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Dmitry Torokhov authored
commit 40974618 upstream. As explained in 1407814240-4275-1-git-send-email-decui@microsoft.com we have a hard load dependency between i8042 and atkbd which prevents keyboard from working on Gen2 Hyper-V VMs. > hyperv_keyboard invokes serio_interrupt(), which needs a valid serio > driver like atkbd.c. atkbd.c depends on libps2.c because it invokes > ps2_command(). libps2.c depends on i8042.c because it invokes > i8042_check_port_owner(). As a result, hyperv_keyboard actually > depends on i8042.c. > > For a Generation 2 Hyper-V VM (meaning no i8042 device emulated), if a > Linux VM (like Arch Linux) happens to configure CONFIG_SERIO_I8042=m > rather than =y, atkbd.ko can't load because i8042.ko can't load(due to > no i8042 device emulated) and finally hyperv_keyboard can't work and > the user can't input: https://bugs.archlinux.org/task/39820 > (Ubuntu/RHEL/SUSE aren't affected since they use CONFIG_SERIO_I8042=y) To break the dependency we move away from using i8042_check_port_owner() and instead allow serio port owner specify a mutex that clients should use to serialize PS/2 command stream. Reported-by:
Mark Laws <mdl@60hz.org> Tested-by:
-
Masahiro Yamada authored
commit fae16989 upstream. Commit fe6b0dfa ("Input: tegra-kbc - use reset framework") accidentally converted _deassert to _assert, so there is no code to wake up this hardware. Fixes: fe6b0dfa ("Input: tegra-kbc - use reset framework") Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by:
Thierry Reding <treding@nvidia.com> Acked-by:
Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by:
-
