- 01 Feb, 2019 1 commit
-
-
Marek Olšák authored
- move all adjustments into one place - specify GDS/GWS/OA alignment in basic units of the heaps - it looks like GDS alignment was 1 instead of 4 Signed-off-by:
Marek Olšák <marek.olsak@amd.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
- 29 Jan, 2019 5 commits
-
-
Christian König authored
kptr is not used any more. Signed-off-by:
Chunming Zhou <david1.zhou@amd.com> Signed-off-by:
-
shaoyunl authored
Reduce the repeated node and hive information during XGMI initialization Signed-off-by:
shaoyunl <shaoyun.liu@amd.com> Acked-by:
-
Alex Deucher authored
Revert "drm/amd/display: add -msse2 to prevent Clang from emitting libcalls to undefined SW FP routines" This reverts commit 10117450. Causes a crash. Bug: https://bugs.freedesktop.org/show_bug.cgi?id=109487Reviewed-by:
Harry Wentland <harry.wentland@amd.com> Signed-off-by:
-
wentalou authored
sriov need to restrict max_pfn below AMDGPU_GMC_HOLE. access the hole results in a range fault interrupt IIRC. Signed-off-by:
Wentao Lou <Wentao.Lou@amd.com> Reviewed-by:
-
wentalou authored
After removing unnecessary VM size calculations, vm_manager.max_pfn would reach 0x10,0000,0000 max_pfn << AMDGPU_GPU_PAGE_SHIFT exceeding AMDGPU_GMC_HOLE_START would cause GPU reset. Signed-off-by:
Monk Liu <monk.liu@amd.com> Signed-off-by:
-
- 28 Jan, 2019 13 commits
-
-
Eric Huang authored
It is to solve RDMA performance issue. Signed-off-by:
Eric Huang <JinhuiEric.Huang@amd.com> Acked-by:
-
Nicholas Kazlauskas authored
[Why] The flip and full structures were allocated but never freed. [How] Free them at the end of the function. There's a small behavioral change here with the function returning early if the allocation fails but we wouldn't should be doing anything in that case anyway. Fixes: c00e0cc0fdc0 ("drm/amd/display: Call into DC once per multiplane flip") Fixes: ea39594e0855 ("drm/amd/display: Perform plane updates only when needed") Signed-off-by:Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by:
Leo Li <sunpeng.li@amd.com> Tested-by:
Michel Dänzer <michel.daenzer@amd.com> Reviewed-by:
-
Fatemeh Darbehani authored
[Why] Enhanced sync need to use vertical_interrupt1. [How] Add vertical_interrupt1 source to irq manger, Implment setup vline interrupt interface. Signed-off-by:
Fatemeh Darbehani <fatemeh.darbehani@amd.com> Reviewed-by:
Jun Lei <Jun.Lei@amd.com> Acked-by:
-
Nicholas Kazlauskas authored
[Why] During any modeset the CRTC stream is removed and a new stream is added. This new stream doesn't carry over CRC capture state if it was previously set. [How] Re-program the stream for CRC capture. The existing DRM callback can be re-used here for the most part - the only modification needed is additional locking now that it's called from within commit tail. Signed-off-by:
-
Nicholas Kazlauskas authored
[Why] In order to read CRC events when CRC capture is enabled the vblank interrput handler needs to be running for the CRTC. The handler is enabled while there is an active vblank reference. When running IGT tests there will often be no active vblank reference but the test expects to read a CRC value. This is valid usage (and works on i915 since they have a CRC interrupt handler) so the reference to the vblank should be grabbed while capture is active. This issue was found running: igt@kms_plane_multiple@atomic-pipe-b-tiling-none The pipe-b is the only one in the initial commit and was not previously active so no vblank reference is grabbed. The vblank interrupt is not enabled and the test times out. [How] Keep a reference to the vblank as long as CRC capture is enabled. If userspace never explicitly disables it then the reference is also dropped when removing the CRTC from the context (stream = NULL). Signed-off-by:
-
Martin Tsai authored
[Why] On current design, driver cannot handle the interrupt for down reply when link training is processing. The DOWN REQ send before link training will keep in the pending DOWN REP state in the queue. It makes the next DOWN REQ be queued until time out. [How] To add a polling sequence before clear payload allocation table to make sure the pending DOWN REP can be handled. Signed-off-by:
Martin Tsai <martin.tsai@amd.com> Reviewed-by:
Charlene Liu <Charlene.Liu@amd.com> Acked-by:
-
Thomas Zimmermann authored
Both functions are obsolete and all calls have been replaced by ttm_bo_get and ttm_bo_put. Signed-off-by:
Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by:
Huang Rui <ray.huang@amd.com> Signed-off-by:
-
Thomas Zimmermann authored
The function ttm_bo_put releases a reference to a TTM buffer object. The function's name is more aligned to the Linux kernel convention of naming ref-counting function _get and _put. A call to ttm_bo_unref takes the address of the TTM BO object's pointer and clears the pointer's value to NULL. This is not necessary in most cases and sometimes even worked around by the calling code. A call to ttm_bo_put only releases the reference without clearing the pointer. The current behaviour of cleaning the pointer is kept in the calling code, but should be removed if not required in a later patch. Signed-off-by:
-
Thomas Zimmermann authored
The function ttm_bo_put releases a reference to a TTM buffer object. The function's name is more aligned to the Linux kernel convention of naming ref-counting function _get and _put. A call to ttm_bo_unref takes the address of the TTM BO object's pointer and clears the pointer's value to NULL. This is not necessary in most cases and sometimes even worked around by the calling code. A call to ttm_bo_put only releases the reference without clearing the pointer. In places where is might be necessary, the current behaviour of cleaning the pointer is kept. Signed-off-by:
-
Thomas Zimmermann authored
The function ttm_bo_get acquires a reference on a TTM buffer object. The function's name is more aligned to the Linux kernel convention of naming ref-counting function _get and _put. Signed-off-by:
-
Thomas Zimmermann authored
The function ttm_bo_put releases a reference to a TTM buffer object. The function's name is more aligned to the Linux kernel convention of naming ref-counting function _get and _put. A call to ttm_bo_unref takes the address of the TTM BO object's pointer and clears the pointer's value to NULL. This is not necessary in most cases and sometimes even worked around by the calling code. A call to ttm_bo_put only releases the reference without clearing the pointer. Signed-off-by:
-
Thomas Zimmermann authored
The function ttm_bo_get acquires a reference on a TTM buffer object. The function's name is more aligned to the Linux kernel convention of naming ref-counting function _get and _put. Signed-off-by:
-
Thomas Zimmermann authored
The function ttm_bo_put releases a reference to a TTM buffer object. The function's name is more aligned to the Linux kernel convention of naming ref-counting function _get and _put. A call to ttm_bo_unref takes the address of the TTM BO object's pointer and clears the pointer's value to NULL. This is not necessary in most cases and sometimes even worked around by the calling code. A call to ttm_bo_put only releases the reference without clearing the pointer. Signed-off-by:
-
- 25 Jan, 2019 21 commits
-
-
ndesaulniers@google.com authored
arch/x86/Makefile disables SSE and SSE2 for the whole kernel. The AMDGPU drivers modified in this patch re-enable SSE but not SSE2. Turn on SSE2 to support emitting double precision floating point instructions rather than calls to non-existent (usually available from gcc_s or compiler_rt) floating point helper routines. Link: https://gcc.gnu.org/onlinedocs/gccint/Soft-float-library-routines.html Link: https://github.com/ClangBuiltLinux/linux/issues/327 Cc: stable@vger.kernel.org # 4.19 Reported-by:
S, Shirish <Shirish.S@amd.com> Reported-by:
Matthias Kaehlcke <mka@google.com> Suggested-by:
James Y Knight <jyknight@google.com> Suggested-by:
Nathan Chancellor <natechancellor@gmail.com> Signed-off-by:
Nick Desaulniers <ndesaulniers@google.com> Tested-by:
Guenter Roeck <linux@roeck-us.net> Tested-by:
Matthias Kaehlcke <mka@chromium.org> Tested-by:
-
Evan Quan authored
Enable retrieving and setting ppfeatures on Vega12. Signed-off-by:
Evan Quan <evan.quan@amd.com> Reviewed-by:
-
Evan Quan authored
Enable SOCclk and DCEFclk dpm level retrieving and setting on Vega12. Signed-off-by:
-
Evan Quan authored
Enable retrieving and setting ppfeatures on Vega10. Signed-off-by:
-
Evan Quan authored
Enable SOCclk and DCEFclk dpm level retrieving and setting on Vega10. Signed-off-by:
-
Evan Quan authored
That's unnecessary. Also it makes more sense to show all the clocks on one metrics table export. Signed-off-by:
-
Evan Quan authored
Current implementation cannot report the correct gfxclk under DS. Signed-off-by:
-
hersen wu authored
[Why] After call bios table crtc_source_select, dal will program fmt again. The bios table program dig_source_select and other fmt register for bios usage which is redundancy and uncessary. [How] Program dig_soruce_select register directly Signed-off-by:
hersen wu <hersenxs.wu@amd.com> Reviewed-by:
-
Steven Chiu authored
Signed-off-by:
Steven Chiu <steven.chiu@amd.com> Reviewed-by:
Aric Cyr <Aric.Cyr@amd.com> Acked-by:
-
Eric Yang authored
[why] Previously we incorrectly skipped backlight control when stream is present but dpms_off = true. This causes backlight to remain on in the we boot up or resume into a external display only configuration where VBIOS posted on the eDP. [How] Add dpms_off into the condition for edp need to turn off. Signed-off-by:
Eric Yang <Eric.Yang2@amd.com> Reviewed-by:
Yongqiang Sun <yongqiang.sun@amd.com> Acked-by:
-
Eric Yang authored
[Why] This change causes regression for S4 resume where gamma is not programmed. The change incorrectly updates the requested dpms_off state. This reverts commit d2b1d6bb. Signed-off-by:
-
Josip Pavic authored
[Why] Improved contrast in ABM 2.2 is desired [How] Increase the contrast factor for ABM levels 2, 3 and 4 Signed-off-by:
Josip Pavic <Josip.Pavic@amd.com> Reviewed-by:
Anthony Koo <Anthony.Koo@amd.com> Acked-by:
-
Krunoslav Kovac authored
[Why] Our output TF calculation doesn't work if no user-specified gamma correction. Normally, user provides this, but driver sohuld just assume default (linear) gamma otherwise. [How] Remove output TF dependency on user gamma being provided. Signed-off-by:
Krunoslav Kovac <Krunoslav.Kovac@amd.com> Reviewed-by:
Sivapiriyan Kumarasamy <Sivapiriyan.Kumarasamy@amd.com> Signed-off-by:
-
John Barberiz authored
[Why] An uninitialized variable would randomly initialize to a large value. This caused enough delay to fail DP Compliance Test 400.2.1. [How] Initialize the variable. Signed-off-by:
John Barberiz <John.Barberiz@amd.com> Reviewed-by:
Wenjing Liu <Wenjing.Liu@amd.com> Acked-by:
-
Josip Pavic authored
[Why] Need method of detecting which version of the DMCU FW is loaded and load the appropriate iRAM. [How] Create definition for ABM 2.2 iRAM, and load it if the DMCU FW version number matches the ABM 2.2 version; otherwise load ABM 2.1 iRAM. Signed-off-by:
-
Josip Pavic authored
[Why] Current date based versioning doesn't tell us about feature version and build version, and is not useful for debug. [How] Add versioning based on feature and build Signed-off-by:
-
David Francis authored
[Why] We were assuming that any commit with allow_modeset == false was a pageflip. This was against drm intention and only worked by sheer luck [How] A pageflip is the change from one framebuffer to another Signed-off-by:
David Francis <David.Francis@amd.com> Reviewed-by:
-
David Francis authored
[Why] Our old logic: if pageflip, update freesync and plane address. Otherwise, update everything. This over-updated on non-pageflip cases, and it failed to update if pageflip and non-pageflip changes occurred on the same commit [How] Update flip_addrs on pageflips. Update scaling_info when it changes. Update color fields on color changes. Updates plane_info always because we don't have a good way of knowing when it needs to be updated. Unfortunately, this means that every stream commit involves two calls into DC. In particular, on pageflips there is a second, pointless update that changes nothing but costs several microseconds (about a 50% increase in time taken). The update is fast, but there are comparisons and some useless programming. Leave TODOs indicating dissatisfaction. Signed-off-by:
-
David Francis authored
[Why] amdgpu_dm_commit_planes was performing multi-plane flips incorrectly: It waited for vblank once per flipped plane It prepared flip ISR and acquired the corresponding vblank ref once per plane, although it closed ISR and put the ref once per crtc It called into dc once per flipped plane, duplicating some work [How] Wait for vblank, get vblank ref, prepare flip ISR, and call into DC only once, and only if there is a pageflip Make freesync continue to update planes even if vrr information has already been changed Signed-off-by:
-
David Francis authored
[Why] Underscan and ABM are connector properties but require updates to DC stream state. Previously, on updates to these properties the affected stream and all its planes were committed. This is unnecessary; only a few fields on the stream need to be changed. [How] If scaling or ABM have changed, change the stream and create a stream update with those changes. Call DC with only those fields. Signed-off-by:
-
David Francis authored
[Why] DC was assuming that any surface_update->scaling_info meant the update was at least medium. However, if nothing has changed there is no scaling to program, so there is no problem with the update being fast [How] If every update flag is not set, the update is fast Signed-off-by:
-
