- 07 Jun, 2017 9 commits
-
-
Eric Dumazet authored
[ Upstream commit fdcee2cb ] SCTP needs fixes similar to 83eaddab ("ipv6/dccp: do not inherit ipv6_mc_list from parent"), otherwise bad things can happen. Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
Andrey Konovalov <andreyknvl@google.com> Tested-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Xin Long authored
[ Upstream commit dbc2b5e9 ] Commit 0ca50d12 ("sctp: fix src address selection if using secondary addresses") has fixed a src address selection issue when using secondary addresses for ipv4. Now sctp ipv6 also has the similar issue. When using a secondary address, sctp_v6_get_dst tries to choose the saddr which has the most same bits with the daddr by sctp_v6_addr_match_len. It may make some cases not work as expected. hostA: [1] fd21:356b:459a:cf10::11 (eth1) [2] fd21:356b:459a:cf20::11 (eth2) hostB: [a] fd21:356b:459a:cf30::2 (eth1) [b] fd21:356b:459a:cf40::2 (eth2) route from hostA to hostB: fd21:356b:459a:cf30::/64 dev eth1 metric 1024 mtu 1500 The expected path should be: fd21:356b:459a:cf10::11 <-> fd21:356b:459a:cf30::2 But addr[2] matches addr[a] more bits than addr[1] does, according to sctp_v6_addr_match_len. It causes the path to be: fd21:356b:459a:cf20::11 <-> fd21:356b:459a:cf30::2 This patch is to fix it with the same way as Marcelo's fix for sctp ipv4. As no ip_dev_find for ipv6, this patch is to use ipv6_chk_addr to check if the saddr is in a dev instead. Note that for backwards compatibility, it will still do the addr_match_len check here when no optimal is found. Reported-by:
Patrick Talbert <ptalbert@redhat.com> Signed-off-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
-
Yuchung Cheng authored
[ Upstream commit b451e5d2 ] This patch fixes a bug in splitting an SKB during SACK processing. Specifically if an skb contains multiple packets and is only partially sacked in the higher sequences, tcp_match_sack_to_skb() splits the skb and marks the second fragment as SACKed. The current code further attempts rounding up the first fragment to MSS boundaries. But it misses a boundary condition when the rounded-up fragment size (pkt_len) is exactly skb size. Spliting such an skb is pointless and causses a kernel warning and aborts the SACK processing. This patch universally checks such over-split before calling tcp_fragment to prevent these unnecessary warnings. Fixes: adb92db8 ("tcp: Make SACK code to split only at mss boundaries") Signed-off-by:
Yuchung Cheng <ycheng@google.com> Signed-off-by:
Soheil Hassas Yeganeh <soheil@google.com> Acked-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
-
Julian Wiedmann authored
[ Upstream commit 25e2c341 ] Access card->dev only after checking whether's its valid. Signed-off-by:
Julian Wiedmann <jwi@linux.vnet.ibm.com> Reviewed-by:
Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by:
-
Julian Wiedmann authored
[ Upstream commit 2d2ebb3e ] commit b4d72c08 ("qeth: bridgeport support - basic control") broke the support for OSM and OSN devices as follows: As OSM and OSN are L2 only, qeth_core_probe_device() does an early setup by loading the l2 discipline and calling qeth_l2_probe_device(). In this context, adding the l2-specific bridgeport sysfs attributes via qeth_l2_create_device_attributes() hits a BUG_ON in fs/sysfs/group.c, since the basic sysfs infrastructure for the device hasn't been established yet. Note that OSN actually has its own unique sysfs attributes (qeth_osn_devtype), so the additional attributes shouldn't be created at all. For OSM, add a new qeth_l2_devtype that contains all the common and l2-specific sysfs attributes. When qeth_core_probe_device() does early setup for OSM or OSN, assign the corresponding devtype so that the ccwgroup probe code creates the full set of sysfs attributes. This allows us to skip qeth_l2_create_device_attributes() in case of an early setup. Any device that can't do early setup will initially have only the generic sysfs attributes, and when it's probed later qeth_l2_probe_device() adds the l2-specific attributes. If an early-setup device is removed (by calling ccwgroup_ungroup()), device_unregister() will - using the devtype - delete the l2-specific attributes before qeth_l2_remove_device() is called. So make sure to not remove them twice. What complicates the issue is that qeth_l2_probe_device() and qeth_l2_remove_device() is also called on a device when its layer2 attribute changes (ie. its layer mode is switched). For early-setup devices this wouldn't work properly - we wouldn't remove the l2-specific attributes when switching to L3. But switching the layer mode doesn't actually make any sense; we already decided that the device can only operate in L2! So just refuse to switch the layer mode on such devices. Note that OSN doesn't have a layer2 attribute, so we only need to special-case OSM. Based on an initial patch by Ursula Braun. Fixes: b4d72c08 ("qeth: bridgeport support - basic control") Signed-off-by:
-
Ursula Braun authored
[ Upstream commit 9111e788 ] When setting up the device from within the layer discipline's probe routine, creating the layer-specific sysfs attributes can fail. Report this error back to the caller, and handle it by releasing the layer discipline. Signed-off-by:
-
WANG Cong authored
[ Upstream commit 83eaddab ] Like commit 657831ff ("dccp/tcp: do not inherit mc_list from parent") we should clear ipv6_mc_list etc. for IPv6 sockets too. Cc: Eric Dumazet <edumazet@google.com> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Acked-by:
-
Eric Dumazet authored
[ Upstream commit 657831ff ] syzkaller found a way to trigger double frees from ip_mc_drop_socket() It turns out that leave a copy of parent mc_list at accept() time, which is very bad. Very similar to commit 8b485ce6 ("tcp: do not inherit fastopen_req from parent") Initial report from Pray3r, completed by Andrey one. Thanks a lot to them ! Signed-off-by:
Pray3r <pray3r.z@gmail.com> Reported-by:
-
Orlando Arias authored
[ Upstream commit deba804c ] Greetings, GCC 7 introduced the -Wstringop-overflow flag to detect buffer overflows in calls to string handling functions [1][2]. Due to the way ``empty_zero_page'' is declared in arch/sparc/include/setup.h, this causes a warning to trigger at compile time in the function mem_init(), which is subsequently converted to an error. The ensuing patch fixes this issue and aligns the declaration of empty_zero_page to that of other architectures. Thank you. Cheers, Orlando. [1] https://gcc.gnu.org/ml/gcc-patches/2016-10/msg02308.html [2] https://gcc.gnu.org/gcc-7/changes.htmlSigned-off-by:
Orlando Arias <oarias@knights.ucf.edu> -------------------------------------------------------------------------------- Signed-off-by:
-
- 25 May, 2017 31 commits
-
-
Greg Kroah-Hartman authored
-
Julius Werner authored
commit b299cde2 upstream. /dev/mem currently allows mmap() mappings that wrap around the end of the physical address space, which should probably be illegal. It circumvents the existing STRICT_DEVMEM permission check because the loop immediately terminates (as the start address is already higher than the end address). On the x86_64 architecture it will then cause a panic (from the BUG(start >= end) in arch/x86/mm/pat.c:reserve_memtype()). This patch adds an explicit check to make sure offset + size will not wrap around in the physical address type. Signed-off-by:
Julius Werner <jwerner@chromium.org> Signed-off-by:
-
J. Bruce Fields authored
commit f961e3f2 upstream. In error cases, lgp->lg_layout_type may be out of bounds; so we shouldn't be using it until after the check of nfserr. This was seen to crash nfsd threads when the server receives a LAYOUTGET request with a large layout type. GETDEVICEINFO has the same problem. Reported-by:
Ari Kauppi <Ari.Kauppi@synopsys.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
Mario Kleiner authored
commit e345da82 upstream. The builtin eDP panel in the HP zBook 17 G2 supports 10 bpc, as advertised by the Laptops product specs and verified via injecting a fixed edid + photometer measurements, but edid reports unknown depth, so drivers fall back to 6 bpc. Add a quirk to get the full 10 bpc. Signed-off-by:
Mario Kleiner <mario.kleiner.de@gmail.com> Acked-by:
Harry Wentland <harry.wentland@amd.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1492787108-23959-1-git-send-email-mario.kleiner.de@gmail.comSigned-off-by:
-
Lukas Wunner authored
commit ea00353f upstream. Laurent Pinchart reported that the Renesas R-Car H2 Lager board (r8a7790) crashes during suspend tests. Geert Uytterhoeven managed to reproduce the issue on an M2-W Koelsch board (r8a7791): It occurs when the PME scan runs, once per second. During PME scan, the PCI host bridge (rcar-pci) registers are accessed while its module clock has already been disabled, leading to the crash. One reproducer is to configure s2ram to use "s2idle" instead of "deep" suspend: # echo 0 > /sys/module/printk/parameters/console_suspend # echo s2idle > /sys/power/mem_sleep # echo mem > /sys/power/state Another reproducer is to write either "platform" or "processors" to /sys/power/pm_test. It does not (or is less likely) to happen during full system suspend ("core" or "none") because system suspend also disables timers, and thus the workqueue handling PME scans no longer runs. Geert believes the issue may still happen in the small window between disabling module clocks and disabling timers: # echo 0 > /sys/module/printk/parameters/console_suspend # echo platform > /sys/power/pm_test # Or "processors" # echo mem > /sys/power/state (Make sure CONFIG_PCI_RCAR_GEN2 and CONFIG_USB_OHCI_HCD_PCI are enabled.) Rafael Wysocki agrees that PME scans should be suspended before the host bridge registers become inaccessible. To that end, queue the task on a workqueue that gets frozen before devices suspend. Rafael notes however that as a result, some wakeup events may be missed if they are delivered via PME from a device without working IRQ (which hence must be polled) and occur after the workqueue has been frozen. If that turns out to be an issue in practice, it may be possible to solve it by calling pci_pme_list_scan() once directly from one of the host bridge's pm_ops callbacks. Stacktrace for posterity: PM: Syncing filesystems ... [ 38.566237] done. PM: Preparing system for sleep (mem) Freezing user space processes ... [ 38.579813] (elapsed 0.001 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. PM: Suspending system (mem) PM: suspend of devices complete after 152.456 msecs PM: late suspend of devices complete after 2.809 msecs PM: noirq suspend of devices complete after 29.863 msecs suspend debug: Waiting for 5 second(s). Unhandled fault: asynchronous external abort (0x1211) at 0x00000000 pgd = c0003000 [00000000] *pgd=80000040004003, *pmd=00000000 Internal error: : 1211 [#1] SMP ARM Modules linked in: CPU: 1 PID: 20 Comm: kworker/1:1 Not tainted 4.9.0-rc1-koelsch-00011-g68db9bc8 #3383 Hardware name: Generic R8A7791 (Flattened Device Tree) Workqueue: events pci_pme_list_scan task: eb56e140 task.stack: eb58e000 PC is at pci_generic_config_read+0x64/0x6c LR is at rcar_pci_cfg_base+0x64/0x84 pc : [<c041d7b4>] lr : [<c04309a0>] psr: 600d0093 sp : eb58fe98 ip : c041d750 fp : 00000008 r10: c0e2283c r9 : 00000000 r8 : 600d0013 r7 : 00000008 r6 : eb58fed6 r5 : 00000002 r4 : eb58feb4 r3 : 00000000 r2 : 00000044 r1 : 00000008 r0 : 00000000 Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user Control: 30c5387d Table: 6a9f6c80 DAC: 55555555 Process kworker/1:1 (pid: 20, stack limit = 0xeb58e210) Stack: (0xeb58fe98 to 0xeb590000) fe80: 00000002 00000044 fea0: eb6f5800 c041d9b0 eb58feb4 00000008 00000044 00000000 eb78a000 eb78a000 fec0: 00000044 00000000 eb9aff00 c0424bf0 eb78a000 00000000 eb78a000 c0e22830 fee0: ea8a6fc0 c0424c5c eaae79c0 c0424ce0 eb55f380 c0e22838 eb9a9800 c0235fbc ff00: eb55f380 c0e22838 eb55f380 eb9a9800 eb9a9800 eb58e000 eb9a9824 c0e02100 ff20: eb55f398 c02366c4 eb56e140 eb5631c0 00000000 eb55f380 c023641c 00000000 ff40: 00000000 00000000 00000000 c023a928 cd105598 00000000 40506a34 eb55f380 ff60: 00000000 00000000 dead4ead ffffffff ffffffff eb58ff74 eb58ff74 00000000 ff80: 00000000 dead4ead ffffffff ffffffff eb58ff90 eb58ff90 eb58ffac eb5631c0 ffa0: c023a844 00000000 00000000 c0206d68 00000000 00000000 00000000 00000000 ffc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ffe0: 00000000 00000000 00000000 00000000 00000013 00000000 3a81336c 10ccd1dd [<c041d7b4>] (pci_generic_config_read) from [<c041d9b0>] (pci_bus_read_config_word+0x58/0x80) [<c041d9b0>] (pci_bus_read_config_word) from [<c0424bf0>] (pci_check_pme_status+0x34/0x78) [<c0424bf0>] (pci_check_pme_status) from [<c0424c5c>] (pci_pme_wakeup+0x28/0x54) [<c0424c5c>] (pci_pme_wakeup) from [<c0424ce0>] (pci_pme_list_scan+0x58/0xb4) [<c0424ce0>] (pci_pme_list_scan) from [<c0235fbc>] (process_one_work+0x1bc/0x308) [<c0235fbc>] (process_one_work) from [<c02366c4>] (worker_thread+0x2a8/0x3e0) [<c02366c4>] (worker_thread) from [<c023a928>] (kthread+0xe4/0xfc) [<c023a928>] (kthread) from [<c0206d68>] (ret_from_fork+0x14/0x2c) Code: ea000000 e5903000 f57ff04f e3a00000 (e5843000) ---[ end trace 667d43ba3aa9e589 ]--- Fixes: df17e62e ("PCI: Add support for polling PME state on suspended legacy PCI devices") Reported-and-tested-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reported-and-tested-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
Lukas Wunner <lukas@wunner.de> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Cc: Simon Horman <horms+renesas@verge.net.au> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Signed-off-by:
-
David Woodhouse authored
commit 6bccc7f4 upstream. In the PCI_MMAP_PROCFS case when the address being passed by the user is a 'user visible' resource address based on the bus window, and not the actual contents of the resource, that's what we need to be checking it against. Signed-off-by:
David Woodhouse <dwmw@amazon.co.uk> Signed-off-by:
-
Thomas Gleixner authored
commit 30e7d894 upstream. Enabling the tracer selftest triggers occasionally the warning in text_poke(), which warns when the to be modified page is not marked reserved. The reason is that the tracer selftest installs kprobes on functions marked __init for testing. These probes are removed after the tests, but that removal schedules the delayed kprobes_optimizer work, which will do the actual text poke. If the work is executed after the init text is freed, then the warning triggers. The bug can be reproduced reliably when the work delay is increased. Flush the optimizer work and wait for the optimizing/unoptimizing lists to become empty before returning from the kprobes tracer selftest. That ensures that all operations which were queued due to the probes removal have completed. Link: http://lkml.kernel.org/r/20170516094802.76a468bb@gandalf.local.homeSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> Acked-by:
Masami Hiramatsu <mhiramat@kernel.org> Fixes: 6274de49 ("kprobes: Support delayed unoptimizing") Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
-
Al Viro authored
commit a8c39544 upstream. failing sys_wait4() won't fill struct rusage... Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Thomas Gleixner authored
commit 2c4569ca upstream. irq_set_chained_handler_and_data() sets up the chained interrupt and then stores the handler data. That's racy against an immediate interrupt which gets handled before the store of the handler data happened. The handler will dereference a NULL pointer and crash. Cure it by storing handler data before installing the chained handler. Reported-by:
Borislav Petkov <bp@alien8.de> Signed-off-by:
-
Johan Hovold authored
commit 41318a2b upstream. Add missing endianness conversion when using the USB device-descriptor idProduct field to apply a hardware quirk. Fixes: 1ba47da5 ("uwb: add the i1480 DFU driver") Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
James Hogan authored
commit 3a158a62 upstream. The metag implementation of strncpy_from_user() doesn't validate the src pointer, which could allow reading of arbitrary kernel memory. Add a short access_ok() check to prevent that. Its still possible for it to read across the user/kernel boundary, but it will invariably reach a NUL character after only 9 bytes, leaking only a static kernel address being loaded into D0Re0 at the beginning of __start, which is acceptable for the immediate fix. Reported-by:
James Hogan <james.hogan@imgtec.com> Cc: linux-metag@vger.kernel.org Signed-off-by:
-
James Hogan authored
commit 8a8b5663 upstream. The __user_bad() macro used by access_ok() has a few corner cases noticed by Al Viro where it doesn't behave correctly: - The kernel range check has off by 1 errors which permit access to the first and last byte of the kernel mapped range. - The kernel range check ends at LINCORE_BASE rather than META_MEMORY_LIMIT, which is ineffective when the kernel is in global space (an extremely uncommon configuration). There are a couple of other shortcomings here too: - Access to the whole of the other address space is permitted (i.e. the global half of the address space when the kernel is in local space). This isn't ideal as it could theoretically still contain privileged mappings set up by the bootloader. - The size argument is unused, permitting user copies which start on valid pages at the end of the user address range and cross the boundary into the kernel address space (e.g. addr = 0x3ffffff0, size > 0x10). It isn't very convenient to add size checks when disallowing certain regions, and it seems far safer to be sure and explicit about what userland is able to access, so invert the logic to allow certain regions instead, and fix the off by 1 errors and missing size checks. This also allows the get_fs() == KERNEL_DS check to be more easily optimised into the user address range case. We now have 3 such allowed regions: - The user address range (incorporating the get_fs() == KERNEL_DS check). - NULL (some kernel code expects this to work, and we'll always catch the fault anyway). - The core code memory region. Fixes: 373cd784 ("metag: Memory handling") Reported-by:
-
KarimAllah Ahmed authored
commit f73a7eee upstream. Ever since commit 091d42e4 ("iommu/vt-d: Copy translation tables from old kernel") the kdump kernel copies the IOMMU context tables from the previous kernel. Each device mappings will be destroyed once the driver for the respective device takes over. This unfortunately breaks the workflow of mapping and unmapping a new context to the IOMMU. The mapping function assumes that either: 1) Unmapping did the proper IOMMU flushing and it only ever flush if the IOMMU unit supports caching invalid entries. 2) The system just booted and the initialization code took care of flushing all IOMMU caches. This assumption is not true for the kdump kernel since the context tables have been copied from the previous kernel and translations could have been cached ever since. So make sure to flush the IOTLB as well when we destroy these old copied mappings. Cc: Joerg Roedel <joro@8bytes.org> Cc: David Woodhouse <dwmw2@infradead.org> Cc: David Woodhouse <dwmw@amazon.co.uk> Cc: Anthony Liguori <aliguori@amazon.com> Signed-off-by:
KarimAllah Ahmed <karahmed@amazon.de> Acked-by:
Joerg Roedel <jroedel@suse.de> Signed-off-by:
-
Malcolm Priestley authored
commit 90be652c upstream. EPROM_CMD is 2 byte aligned on PCI map so calling with rtl92e_readl will return invalid data so use rtl92e_readw. The device is unable to select the right eeprom type. Signed-off-by:
Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by:
-
Malcolm Priestley authored
commit 867510bd upstream. BSSIDR has two byte alignment on PCI ioremap correct the write by swapping to 16 bits first. This fixes a problem that the device associates fail because the filter is not set correctly. Signed-off-by:
-
Keno Fischer authored
commit 8310d48b upstream. In commit 19be0eaf ("mm: remove gup_flags FOLL_WRITE games from __get_user_pages()"), the mm code was changed from unsetting FOLL_WRITE after a COW was resolved to setting the (newly introduced) FOLL_COW instead. Simultaneously, the check in gup.c was updated to still allow writes with FOLL_FORCE set if FOLL_COW had also been set. However, a similar check in huge_memory.c was forgotten. As a result, remote memory writes to ro regions of memory backed by transparent huge pages cause an infinite loop in the kernel (handle_mm_fault sets FOLL_COW and returns 0 causing a retry, but follow_trans_huge_pmd bails out immidiately because `(flags & FOLL_WRITE) && !pmd_write(*pmd)` is true. While in this state the process is stil SIGKILLable, but little else works (e.g. no ptrace attach, no other signals). This is easily reproduced with the following code (assuming thp are set to always): #include <assert.h> #include <fcntl.h> #include <stdint.h> #include <stdio.h> #include <string.h> #include <sys/mman.h> #include <sys/stat.h> #include <sys/types.h> #include <sys/wait.h> #include <unistd.h> #define TEST_SIZE 5 * 1024 * 1024 int main(void) { int status; pid_t child; int fd = open("/proc/self/mem", O_RDWR); void *addr = mmap(NULL, TEST_SIZE, PROT_READ, MAP_ANONYMOUS | MAP_PRIVATE, 0, 0); assert(addr != MAP_FAILED); pid_t parent_pid = getpid(); if ((child = fork()) == 0) { void *addr2 = mmap(NULL, TEST_SIZE, PROT_READ | PROT_WRITE, MAP_ANONYMOUS | MAP_PRIVATE, 0, 0); assert(addr2 != MAP_FAILED); memset(addr2, 'a', TEST_SIZE); pwrite(fd, addr2, TEST_SIZE, (uintptr_t)addr); return 0; } assert(child == waitpid(child, &status, 0)); assert(WIFEXITED(status) && WEXITSTATUS(status) == 0); return 0; } Fix this by updating follow_trans_huge_pmd in huge_memory.c analogously to the update in gup.c in the original commit. The same pattern exists in follow_devmap_pmd. However, we should not be able to reach that check with FOLL_COW set, so add WARN_ONCE to make sure we notice if we ever do. [akpm@linux-foundation.org: coding-style fixes] Link: http://lkml.kernel.org/r/20170106015025.GA38411@juliacomputing.comSigned-off-by:
Keno Fischer <keno@juliacomputing.com> Acked-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Greg Thelen <gthelen@google.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Willy Tarreau <w@1wt.eu> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Hugh Dickins <hughd@google.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> [AmitP: Minor refactoring of upstream changes for linux-3.18.y, where follow_devmap_pmd() doesn't exist.] Signed-off-by:
Amit Pundir <amit.pundir@linaro.org> Signed-off-by:
-
Takashi Iwai authored
commit 22a1e778 upstream. The commit 8dfbcc43 ("[media] xc2028: avoid use after free") tried to address the reported use-after-free by clearing the reference. However, it's clearing the wrong pointer; it sets NULL to priv->ctrl.fname, but it's anyway overwritten by the next line memcpy(&priv->ctrl, p, sizeof(priv->ctrl)). OTOH, the actual code accessing the freed string is the strcmp() call with priv->fname: if (!firmware_name[0] && p->fname && priv->fname && strcmp(p->fname, priv->fname)) free_firmware(priv); where priv->fname points to the previous file name, and this was already freed by kfree(). For fixing the bug properly, this patch does the following: - Keep the copy of firmware file name in only priv->fname, priv->ctrl.fname isn't changed; - The allocation is done only when the firmware gets loaded; - The kfree() is called in free_firmware() commonly Fixes: commit 8dfbcc43 ('[media] xc2028: avoid use after free') Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by:
-
Kristina Martsenko authored
commit f0e421b1 upstream. Some kernel features don't currently work if a task puts a non-zero address tag in its stack pointer, frame pointer, or frame record entries (FP, LR). For example, with a tagged stack pointer, the kernel can't deliver signals to the process, and the task is killed instead. As another example, with a tagged frame pointer or frame records, perf fails to generate call graphs or resolve symbols. For now, just document these limitations, instead of finding and fixing everything that doesn't work, as it's not known if anyone needs to use tags in these places anyway. In addition, as requested by Dave Martin, generalize the limitations into a general kernel address tag policy, and refactor tagged-pointers.txt to include it. Fixes: d50240a5 ("arm64: mm: permit use of tagged pointers at EL0") Reviewed-by:
Dave Martin <Dave.Martin@arm.com> Acked-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
Kristina Martsenko <kristina.martsenko@arm.com> Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
-
Mark Rutland authored
commit a06040d7 upstream. Our access_ok() simply hands its arguments over to __range_ok(), which implicitly assummes that the addr parameter is 64 bits wide. This isn't necessarily true for compat code, which might pass down a 32-bit address parameter. In these cases, we don't have a guarantee that the address has been zero extended to 64 bits, and the upper bits of the register may contain unknown values, potentially resulting in a suprious failure. Avoid this by explicitly casting the addr parameter to an unsigned long (as is done on other architectures), ensuring that the parameter is widened appropriately. Fixes: 0aea86a2 ("arm64: User access library functions") Acked-by:
Mark Rutland <mark.rutland@arm.com> Signed-off-by:
-
Mark Rutland authored
commit fee960be upstream. The inline assembly in __XCHG_CASE() uses a +Q constraint to hazard against other accesses to the memory location being exchanged. However, the pointer passed to the constraint is a u8 pointer, and thus the hazard only applies to the first byte of the location. GCC can take advantage of this, assuming that other portions of the location are unchanged, as demonstrated with the following test case: union u { unsigned long l; unsigned int i[2]; }; unsigned long update_char_hazard(union u *u) { unsigned int a, b; a = u->i[1]; asm ("str %1, %0" : "+Q" (*(char *)&u->l) : "r" (0UL)); b = u->i[1]; return a ^ b; } unsigned long update_long_hazard(union u *u) { unsigned int a, b; a = u->i[1]; asm ("str %1, %0" : "+Q" (*(long *)&u->l) : "r" (0UL)); b = u->i[1]; return a ^ b; } The linaro 15.08 GCC 5.1.1 toolchain compiles the above as follows when using -O2 or above: 0000000000000000 <update_char_hazard>: 0: d2800001 mov x1, #0x0 // #0 4: f9000001 str x1, [x0] 8: d2800000 mov x0, #0x0 // #0 c: d65f03c0 ret 0000000000000010 <update_long_hazard>: 10: b9400401 ldr w1, [x0,#4] 14: d2800002 mov x2, #0x0 // #0 18: f9000002 str x2, [x0] 1c: b9400400 ldr w0, [x0,#4] 20: 4a000020 eor w0, w1, w0 24: d65f03c0 ret This patch fixes the issue by passing an unsigned long pointer into the +Q constraint, as we do for our cmpxchg code. This may hazard against more than is necessary, but this is better than missing a necessary hazard. Fixes: 305d454a ("arm64: atomics: implement native {relaxed, acquire, release} atomics") Acked-by:
-
Ludovic Desroches authored
commit d3df1ec0 upstream. Remove ADC channels that are not available by default on the sama5d3_xplained board (resistor not populated) in order to not create confusion. Signed-off-by:
Ludovic Desroches <ludovic.desroches@microchip.com> Acked-by:
Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by:
Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by:
-
Ludovic Desroches authored
commit 9cdd31e5 upstream. The voltage reference for the ADC is not 3V but 3.3V since it is connected to VDDANA. Signed-off-by:
-
LiuHailong authored
commit fd615f69 upstream. Debug interrupts can be taken during interrupt entry, since interrupt entry does not automatically turn them off. The kernel will check whether the faulting instruction is between [interrupt_base_book3e, __end_interrupts], and if so clear MSR[DE] and return. However, when the kernel is built with CONFIG_RELOCATABLE, it can't use LOAD_REG_IMMEDIATE(r14,interrupt_base_book3e) and LOAD_REG_IMMEDIATE(r15,__end_interrupts), as they ignore relocation. Thus, if the kernel is actually running at a different address than it was built at, the address comparison will fail, and the exception entry code will hang at kernel_dbg_exc. r2(toc) is also not usable here, as r2 still holds data from the interrupted context, so LOAD_REG_ADDR() doesn't work either. So we use the *name@got* to get the EV of two labels directly. Test programs test.c shows as follows: int main(int argc, char *argv[]) { if (access("/proc/sys/kernel/perf_event_paranoid", F_OK) == -1) printf("Kernel doesn't have perf_event support\n"); } Steps to reproduce the bug, for example: 1) ./gdb ./test 2) (gdb) b access 3) (gdb) r 4) (gdb) s Signed-off-by:
Liu Hailong <liu.hailong6@zte.com.cn> Signed-off-by:
Jiang Xuexin <jiang.xuexin@zte.com.cn> Reviewed-by:
Jiang Biao <jiang.biao2@zte.com.cn> Reviewed-by:
Liu Song <liu.song11@zte.com.cn> Reviewed-by:
Huang Jian <huang.jian@zte.com.cn> [scottwood: cleaned up commit message, and specified bad behavior as a hang rather than an oops to correspond to mainline kernel behavior] Fixes: 1cb6e064 ("powerpc/book3e: support CONFIG_RELOCATABLE") Signed-off-by:
Scott Wood <oss@buserror.net> Signed-off-by:
-
Tyrel Datwyler authored
commit 68baf692 upstream. Historically struct device_node references were tracked using a kref embedded as a struct field. Commit 75b57ecf ("of: Make device nodes kobjects so they show up in sysfs") (Mar 2014) refactored device_nodes to be kobjects such that the device tree could by more simply exposed to userspace using sysfs. Commit 0829f6d1 ("of: device_node kobject lifecycle fixes") (Mar 2014) followed up these changes to better control the kobject lifecycle and in particular the referecne counting via of_node_get(), of_node_put(), and of_node_init(). A result of this second commit was that it introduced an of_node_put() call when a dynamic node is detached, in of_node_remove(), that removes the initial kobj reference created by of_node_init(). Traditionally as the original dynamic device node user the pseries code had assumed responsibilty for releasing this final reference in its platform specific DLPAR detach code. This patch fixes a refcount underflow introduced by commit 0829f6d1, and recently exposed by the upstreaming of the recount API. Messages like the following are no longer seen in the kernel log with this patch following DLPAR remove operations of cpus and pci devices. rpadlpar_io: slot PHB 72 removed refcount_t: underflow; use-after-free. ------------[ cut here ]------------ WARNING: CPU: 5 PID: 3335 at lib/refcount.c:128 refcount_sub_and_test+0xf4/0x110 Fixes: 0829f6d1 ("of: device_node kobject lifecycle fixes") Signed-off-by:
Tyrel Datwyler <tyreld@linux.vnet.ibm.com> [mpe: Make change log commit references more verbose] Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Mahesh Salgaonkar authored
commit d93b0ac0 upstream. machine_check_early() gets called in real mode. The very first time when add_taint() is called, it prints a warning which ends up calling opal call (that uses OPAL_CALL wrapper) for writing it to console. If we get a very first machine check while we are in opal we are doomed. OPAL_CALL overwrites the PACASAVEDMSR in r13 and in this case when we are done with MCE handling the original opal call will use this new MSR on it's way back to opal_return. This usually leads to unexpected behaviour or the kernel to panic. Instead move the add_taint() call later in the virtual mode where it is safe to call. This is broken with current FW level. We got lucky so far for not getting very first MCE hit while in OPAL. But easily reproducible on Mambo. Fixes: 27ea2c42 ("powerpc: Set the correct kernel taint on machine check errors.") Signed-off-by:
Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by:
-
Johan Hovold authored
commit 0cd273bb upstream. Make sure to check the number of endpoints to avoid dereferencing a NULL-pointer or accessing memory beyond the endpoint array should a malicious device lack the expected endpoints. Fixes: e0d3bafd ("V4L/DVB (10954): Add cx231xx USB driver") Cc: Sri Deevi <Srinivasa.Deevi@conexant.com> Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
-
Johan Hovold authored
commit 65f92164 upstream. Make sure to check the number of endpoints to avoid dereferencing a NULL-pointer or accessing memory beyond the endpoint array should a malicious device lack the expected endpoints. Fixes: e0d3bafd ("V4L/DVB (10954): Add cx231xx USB driver") Cc: Sri Deevi <Srinivasa.Deevi@conexant.com> Signed-off-by:
-
Johan Hovold authored
commit fff1abc4 upstream. Make sure to release the snd_card also on a late allocation error. Fixes: e0d3bafd ("V4L/DVB (10954): Add cx231xx USB driver") Cc: Sri Deevi <Srinivasa.Deevi@conexant.com> Signed-off-by:
-
Daniel Scheller authored
commit 158f0328 upstream. Fixes "w_scan -f c" complaining with This dvb driver is *buggy*: the symbol rate limits are undefined - please report to linuxtv.org) Signed-off-by:
Daniel Scheller <d.scheller@gmx.net> Acked-by:
Abylay Ospan <aospan@netup.ru> Signed-off-by:
-
Alyssa Milburn authored
commit ee0fe833 upstream. This code copies actual_length-128 bytes from the header, which will underflow if the received buffer is too small. Signed-off-by:
Alyssa Milburn <amilburn@zall.org> Signed-off-by:
-
Johan Hovold authored
commit d5823511 upstream. Make sure to check the number of endpoints to avoid dereferencing a NULL-pointer should a malicious device lack endpoints. Fixes: c4018fa2 ("[media] dib0700: fix RC support on Hauppauge Nova-TD") Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by:
-
