ibmpex's temperature sensors report incorrect units.  Apply a conversion
factor so that tempertures report correctly.  Until now, no systems seemed to
report temperatures this way, but evidently QS2x blades do.
Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Cc: "Mark M. Hoffman" <mhoffman@lightlink.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Enhanced the list of supported machines.
Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Cc: Mark M. Hoffman <mhoffman@lightlink.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The QS2x blades ships with v2.54 of the firmware, which use the same
multiplier for all power meters.
Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Cc: Mark M. Hoffman <mhoffman@lightlink.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

We should always put inode we have reference to, even if quota was reenabled
in the mean time.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The check t->pid == t->pid is not the blessed way to check whether a task is a
group leader.

This is not about the code beautifulness only, but about pid namespaces fixes
- both the tgid and the pid fields on the task_struct are (slowly :( )
becoming deprecated.

Besides, the thread_group_leader() macro makes only one dereference :)
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix kernel-doc notation in jbd.
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Exposing the binary blob which is the md 'super-block' via sysfs doesn't
really fit with the whole sysfs model, and ever since commit
8118a859 ("sysfs: fix off-by-one error
in fill_read_buffer()") it doesn't actually work at all (as the size of
the blob is often one page).

(akpm: as in, fs/sysfs/file.c:fill_read_buffer() goes BUG)

So just remove it altogether.  It isn't really useful.
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Correct kernel-doc function names and parameters in rmap.c.
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Add kernel-doc comments to highmem.c.
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix kernel-doc notation in oom_kill.c.
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Convert tiny-shmem.c function comments to kernel-doc.  Add parameters and
convert/fix other kernel-doc in shmem.c.
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix various kernel-doc notation in mm/:

filemap.c: add function short description; convert 2 to kernel-doc
fremap.c: change parameter 'prot' to @prot
pagewalk.c: change "-" in function parameters to ":"
slab.c: fix short description of kmem_ptr_validate()
swap.c: fix description & parameters of put_pages_list()
swap_state.c: fix function parameters
vmalloc.c: change "@returns" to "Returns:" since that is not a parameter
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

My group ran into a AIO process hang on a 2.6.24 kernel with the process
sleeping indefinitely in io_getevents(2) waiting for the last wakeup to come
and it never would.

We ran the tests on x86_64 SMP.  The hang only occurred on a Xeon box
("Clovertown") but not a Core2Duo ("Conroe").  On the Xeon, the L2 cache isn't
shared between all eight processors, but is L2 is shared between between all
two processors on the Core2Duo we use.

My analysis of the hang is if you go down to the second while-loop
in read_events(), what happens on processor #1:
	1) add_wait_queue_exclusive() adds thread to ctx->wait
	2) aio_read_evt() to check tail
	3) if aio_read_evt() returned 0, call [io_]schedule() and sleep

In aio_complete() with processor #2:
	A) info->tail = tail;
	B) waitqueue_active(&ctx->wait)
	C) if waitqueue_active() returned non-0, call wake_up()

The way the code is written, step 1 must be seen by all other processors
before processor 1 checks for pending events in step 2 (that were recorded by
step A) and step A by processor 2 must be seen by all other processors
(checked in step 2) before step B is done.

The race I believed I was seeing is that steps 1 and 2 were
effectively swapped due to the __list_add() being delayed by the L2
cache not shared by some of the other processors.  Imagine:
proc 2: just before step A
proc 1, step 1: adds to ctx->wait, but is not visible by other processors yet
proc 1, step 2: checks tail and sees no pending events
proc 2, step A: updates tail
proc 1, step 3: calls [io_]schedule() and sleeps
proc 2, step B: checks ctx->wait, but sees no one waiting, skips wakeup
                so proc 1 sleeps indefinitely

My patch adds a memory barrier between steps A and B.  It ensures that the
update in step 1 gets seen on processor 2 before continuing.  If processor 1
was just before step 1, the memory barrier makes sure that step A (update
tail) gets seen by the time processor 1 makes it to step 2 (check tail).

Before the patch our AIO process would hang virtually 100% of the time.  After
the patch, we have yet to see the process ever hang.
Signed-off-by: Quentin Barnes <qbarnes+linux@yahoo-inc.com>
Reviewed-by: Zach Brown <zach.brown@oracle.com>
Cc: Benjamin LaHaise <bcrl@kvack.org>
Cc: <stable@kernel.org>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
[ We should probably disallow that "if (waitqueue_active()) wake_up()"
  coding pattern, because it's so often buggy wrt memory ordering ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx:
  async_tx: avoid the async xor_zero_sum path when src_cnt > device->max_xor
  fsldma: Fix the DMA halt when using DMA_INTERRUPT async_tx transfer.

This reverts commit 2c81ce4c.

It caused several new troubles (eg suspend slowdown bisected down to
this patch by Pavel Machek), so just revert it for now.
Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de>
Cc: Pavel Machek <pavel@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-sched-devel

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-sched-devel:
  sched: tune multi-core idle balancing
  sched: retune wake granularity
  sched: wakeup-buddy tasks are cache-hot
  sched: improve affine wakeups
  sched, net: socket wakeups are sync
  sched: clean up wakeup balancing, code flow
  sched: clean up wakeup balancing, rename variables
  sched: clean up wakeup balancing, move wake_affine()

Now that we handle all the special commands using REQ_TYPE_ATA_TASKFILE
rather than using the old REQ_TYPE_ATA_CMD model, we need to also
emulate the lack of full taskfile data that comes with the old command
model (ie when commands are generated with the HDIO_DRIVE_CMD ioctl
rather than using the HDIO_DRIVE_TASK[FILE] ioctls).

In particular, this means that we should handle command completion the
more relaxed way that the old drive_cmd_intr() code did.  It allows
commands to finish early even if they don't use up all the data that we
thought we had for them.

This fixes a regression seen by Anders Eriksson where some SMART
commands sent by smartd would cause a boot-time system hang on his
machine because the IDE command handling code didn't realize that the
command had completed.
Tested-by: Anders Eriksson <aeriksson@fastmail.fm>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Ingo Molnar <mingo@elte.hu>
Acked-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'slab-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/christoph/vm:
  slub page alloc fallback: Enable interrupts for GFP_WAIT.

WAKE_IDLE is too agressive on multi-core CPUs with the new
wake-affine code, keep it on for SMT/HT balancing alone
(where there's no cache affinity at all between logical CPUs).
Signed-off-by: Ingo Molnar <mingo@elte.hu>

reduce wake-up granularity for better interactivity.
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Wakeup-buddy tasks are cache-hot - this makes it a bit harder
for the load-balancer to tear them apart. (but it's still possible,
if the load is sufficiently assymetric)
Signed-off-by: Ingo Molnar <mingo@elte.hu>

improve affine wakeups. Maintain the 'overlap' metric based on CFS's
sum_exec_runtime - which means the amount of time a task executes
after it wakes up some other task.

Use the 'overlap' for the wakeup decisions: if the 'overlap' is short,
it means there's strong workload coupling between this task and the
woken up task. If the 'overlap' is large then the workload is decoupled
and the scheduler will move them to separate CPUs more easily.

( Also slightly move the preempt_check within try_to_wake_up() - this has
  no effect on functionality but allows 'early wakeups' (for still-on-rq
  tasks) to be correctly accounted as well.)
Signed-off-by: Ingo Molnar <mingo@elte.hu>

'sync' wakeups are a hint towards the scheduler that (certain)
networking related wakeups likely create coupling between tasks.
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Clean up the code flow. No code changed:

kernel/sched.o:

   text	   data	    bss	    dec	    hex	filename
  42521	   2858	    232	  45611	   b22b	sched.o.before
  42521	   2858	    232	  45611	   b22b	sched.o.after

md5:
   09b31c44e9aff8666f72773dc433e2df  sched.o.before.asm
   09b31c44e9aff8666f72773dc433e2df  sched.o.after.asm
Signed-off-by: Ingo Molnar <mingo@elte.hu>

rename 'cpu' to 'prev_cpu'. No code changed:

kernel/sched.o:

   text	   data	    bss	    dec	    hex	filename
  42521	   2858	    232	  45611	   b22b	sched.o.before
  42521	   2858	    232	  45611	   b22b	sched.o.after

md5:
   09b31c44e9aff8666f72773dc433e2df  sched.o.before.asm
   09b31c44e9aff8666f72773dc433e2df  sched.o.after.asm
Signed-off-by: Ingo Molnar <mingo@elte.hu>

split out the affine-wakeup bits.

No code changed:

kernel/sched.o:

   text	   data	    bss	    dec	    hex	filename
  42521	   2858	    232	  45611	   b22b	sched.o.before
  42521	   2858	    232	  45611	   b22b	sched.o.after

md5:
   9d76738f1272aa82f0b7affd2f51df6b  sched.o.before.asm
   09b31c44e9aff8666f72773dc433e2df  sched.o.after.asm

(the md5's changed because stack slots changed and some registers
get scheduled by gcc in a different order - but otherwise the before
and after assembly is instruction for instruction equivalent.)
Signed-off-by: Ingo Molnar <mingo@elte.hu>

If the channel cannot perform the operation in one call to
->device_prep_dma_zero_sum, then fallback to the xor+page_is_zero path.
This only affects users with arrays larger than 16 devices on iop13xx or
32 devices on iop3xx.

Cc: <stable@kernel.org>
Cc: Neil Brown <neilb@suse.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

The DMA_INTERRUPT async_tx is a NULL transfer, thus the BCR(count register)
is 0. When the transfer started with a byte count of zero, the DMA
controller will triger a PE(programming error) event and halt, not a normal
interrupt. I add special codes for PE event and DMA_INTERRUPT
async_tx testing.
Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

* 'audit.b49' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit-current:
  [PATCH] export sessionid alongside the loginuid in procfs

Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  HID: update key codes for Apple aluminium
  HID: fix comment in hid_input_report()
  HID: BADPAD entry for NATSU Playstation USB adapter
  HID: Use DIV_ROUND_UP
  HID: remove HID_QUIRK_APPLE_ISO_KEYBOARD for 4th generation macbook

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6:
  ACPI: Set flag DOCK_UNDOCKING when triggered via sysfs
  Revert "ACPI: video: Ignore devices that aren't present in hardware"
  asus_acpi: remove misleading mask
  Revert "ACPI: video: Ignore ACPI video devices that aren't present in hardware"
  thermal: delete "default y"
  thermal: re-document thermal units
  Revert "thermal: fix generic thermal I/F for hwmon"
  ACPI: fix ATA_ACPI build
  ACPI: battery: Don't return -EFAIL on broken packages.
  ACPI: lockdep warning on boot, 2.6.25-rc5

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: ALPS - fix forward/back buttons reversed on Acer 5520-5290
  Input: ALPS - put secondary device in proper place in sysfs
  Input: wacom - add support for Bamboo1, BambooFun, and Cintiq 12WX
  Input: document i8042.noloop
  Input: add keyboard notifier documentation
  Input: ads7846 - fix uninitialized var warning
  Input: i8042 - add SNI RM support
  Input: i8042 - add Lenovo 3000 N100 to nomux blacklist
  Input: i8042 - fix warning on non-x86 builds
  Input: cobalt_btns - assorted fixes

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/selinux-2.6:
  make selinux_parse_opts_str() static

* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
  Revert "unexport bio_{,un}map_user"
  relay: fix subbuf_splice_actor() adding too many pages
  The ps2esdi driver was marked as BROKEN more than two years ago due to being

* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm/ati_pcigart: fix the PCIGART to use drm_pci to allocate GART table.
  drm/radeon: fixup RV550 chip family
  drm/via: attempt again to stabilise the AGP DMA command submission.
  drm: Fix race that can lockup the kernel

F5 and F6 have no second function printed on them. Thus their definitions have
been removed from the table.

KEY_CYCLEWINDOWS doesn't name the function of Mac OS X' Expose properly and
because we couldn't find a better key code, we decided to use KEY_FN_F4
instead.

We also changed KEY_BACK and KEY_FORWARD, which apply to browser functions, to
KEY_PREVIOUSSONG and KEY_NEXTSONG, since the keys are intended to control a
music player.
Signed-off-by: Michael Hanselmann <linux-kernel@hansmi.ch>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

The hid_input_report() in debug mode of course outputs the report itself, not
the device report descriptor.

Fix this error in comment.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Add quirk entry for BADPAD for the NATSU Playstation USB adapter. The
adapter is supported under Linux, but with bad direction detection.
Signed-off-by: Andrew Burton <adb@iinet.net.au>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

The kernel.h macro DIV_ROUND_UP performs the computation (((n) + (d) - 1) /
(d)) but is perhaps more readable.
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>