- 04 Dec, 2013 40 commits
-
-
Kailang Yang authored
commit ba4c4d0a upstream. It's compatible with ALC269. Signed-off-by:
Kailang Yang <kailang@realtek.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Kailang Yang authored
commit 9ad54547 upstream. Set the missing pcbeep default amp for ALC668. Signed-off-by:
-
Peter Zijlstra authored
commit 0fc0287c upstream. Juri hit the below lockdep report: [ 4.303391] ====================================================== [ 4.303392] [ INFO: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected ] [ 4.303394] 3.12.0-dl-peterz+ #144 Not tainted [ 4.303395] ------------------------------------------------------ [ 4.303397] kworker/u4:3/689 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire: [ 4.303399] (&p->mems_allowed_seq){+.+...}, at: [<ffffffff8114e63c>] new_slab+0x6c/0x290 [ 4.303417] [ 4.303417] and this task is already holding: [ 4.303418] (&(&q->__queue_lock)->rlock){..-...}, at: [<ffffffff812d2dfb>] blk_execute_rq_nowait+0x5b/0x100 [ 4.303431] which would create a new lock dependency: [ 4.303432] (&(&q->__queue_lock)->rlock){..-...} -> (&p->mems_allowed_seq){+.+...} [ 4.303436] [ 4.303898] the dependencies between the lock to be acquired and SOFTIRQ-irq-unsafe lock: [ 4.303918] -> (&p->mems_allowed_seq){+.+...} ops: 2762 { [ 4.303922] HARDIRQ-ON-W at: [ 4.303923] [<ffffffff8108ab9a>] __lock_acquire+0x65a/0x1ff0 [ 4.303926] [<ffffffff8108cbe3>] lock_acquire+0x93/0x140 [ 4.303929] [<ffffffff81063dd6>] kthreadd+0x86/0x180 [ 4.303931] [<ffffffff816ded6c>] ret_from_fork+0x7c/0xb0 [ 4.303933] SOFTIRQ-ON-W at: [ 4.303933] [<ffffffff8108abcc>] __lock_acquire+0x68c/0x1ff0 [ 4.303935] [<ffffffff8108cbe3>] lock_acquire+0x93/0x140 [ 4.303940] [<ffffffff81063dd6>] kthreadd+0x86/0x180 [ 4.303955] [<ffffffff816ded6c>] ret_from_fork+0x7c/0xb0 [ 4.303959] INITIAL USE at: [ 4.303960] [<ffffffff8108a884>] __lock_acquire+0x344/0x1ff0 [ 4.303963] [<ffffffff8108cbe3>] lock_acquire+0x93/0x140 [ 4.303966] [<ffffffff81063dd6>] kthreadd+0x86/0x180 [ 4.303969] [<ffffffff816ded6c>] ret_from_fork+0x7c/0xb0 [ 4.303972] } Which reports that we take mems_allowed_seq with interrupts enabled. A little digging found that this can only be from cpuset_change_task_nodemask(). This is an actual deadlock because an interrupt doing an allocation will hit get_mems_allowed()->...->__read_seqcount_begin(), which will spin forever waiting for the write side to complete. Cc: John Stultz <john.stultz@linaro.org> Cc: Mel Gorman <mgorman@suse.de> Reported-by:
Juri Lelli <juri.lelli@gmail.com> Signed-off-by:
Peter Zijlstra <peterz@infradead.org> Tested-by:
Li Zefan <lizefan@huawei.com> Acked-by:
Mel Gorman <mgorman@suse.de> Signed-off-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Tejun Heo authored
commit e605b365 upstream. If a cgroup file implements either read_map() or read_seq_string(), such file is served using seq_file by overriding file->f_op to cgroup_seqfile_operations, which also overrides the release method to single_release() from cgroup_file_release(). Because cgroup_file_open() didn't use to acquire any resources, this used to be fine, but since f7d58818 ("cgroup: pin cgroup_subsys_state when opening a cgroupfs file"), cgroup_file_open() pins the css (cgroup_subsys_state) which is put by cgroup_file_release(). The patch forgot to update the release path for seq_files and each open/release cycle leaks a css reference. Fix it by updating cgroup_file_release() to also handle seq_files and using it for seq_file release path too. Signed-off-by:
-
Tejun Heo authored
commit e5fca243 upstream. Since be445626 ("cgroup: remove synchronize_rcu() from cgroup_diput()"), cgroup destruction path makes use of workqueue. css freeing is performed from a work item from that point on and a later commit, ea15f8cc ("cgroup: split cgroup destruction into two steps"), moves css offlining to workqueue too. As cgroup destruction isn't depended upon for memory reclaim, the destruction work items were put on the system_wq; unfortunately, some controller may block in the destruction path for considerable duration while holding cgroup_mutex. As large part of destruction path is synchronized through cgroup_mutex, when combined with high rate of cgroup removals, this has potential to fill up system_wq's max_active of 256. Also, it turns out that memcg's css destruction path ends up queueing and waiting for work items on system_wq through work_on_cpu(). If such operation happens while system_wq is fully occupied by cgroup destruction work items, work_on_cpu() can't make forward progress because system_wq is full and other destruction work items on system_wq can't make forward progress because the work item waiting for work_on_cpu() is holding cgroup_mutex, leading to deadlock. This can be fixed by queueing destruction work items on a separate workqueue. This patch creates a dedicated workqueue - cgroup_destroy_wq - for this purpose. As these work items shouldn't have inter-dependencies and mostly serialized by cgroup_mutex anyway, giving high concurrency level doesn't buy anything and the workqueue's @max_active is set to 1 so that destruction work items are executed one by one on each CPU. Hugh Dickins: Because cgroup_init() is run before init_workqueues(), cgroup_destroy_wq can't be allocated from cgroup_init(). Do it from a separate core_initcall(). In the future, we probably want to reorder so that workqueue init happens before cgroup_init(). Signed-off-by:
Hugh Dickins <hughd@google.com> Reported-by:
Shawn Bohrer <shawn.bohrer@gmail.com> Link: http://lkml.kernel.org/r/20131111220626.GA7509@sbohrermbp13-local.rgmadvisors.com Link: http://lkml.kernel.org/g/alpine.LNX.2.00.1310301606080.2333@eggly.anvilsSigned-off-by:
-
Tejun Heo authored
commit 8a2b7538 upstream. An ordered workqueue implements execution ordering by using single pool_workqueue with max_active == 1. On a given pool_workqueue, work items are processed in FIFO order and limiting max_active to 1 enforces the queued work items to be processed one by one. Unfortunately, 4c16bd32 ("workqueue: implement NUMA affinity for unbound workqueues") accidentally broke this guarantee by applying NUMA affinity to ordered workqueues too. On NUMA setups, an ordered workqueue would end up with separate pool_workqueues for different nodes. Each pool_workqueue still limits max_active to 1 but multiple work items may be executed concurrently and out of order depending on which node they are queued to. Fix it by using dedicated ordered_wq_attrs[] when creating ordered workqueues. The new attrs match the unbound ones except that no_numa is always set thus forcing all NUMA nodes to share the default pool_workqueue. While at it, add sanity check in workqueue creation path which verifies that an ordered workqueues has only the default pool_workqueue. Signed-off-by:
Libin <huawei.libin@huawei.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Signed-off-by:
-
Heiko Carstens authored
commit 71a86ef0 upstream. When translating a user space address, the address must be checked against the ASCE limit of the process. If the address is larger than the maximum address that is reachable with the ASCE, an ASCE type exception must be generated. The current code simply ignored the higher order bits. This resulted in an address wrap around in user space instead of an exception in user space. Reviewed-by:
Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Catalin Marinas authored
commit 3676f9ef upstream. PTE_PROT_NONE means that a pte is present but does not have any read/write attributes. However, setting the memory type like pgprot_writecombine() is allowed and such bits overlap with PTE_PROT_NONE. This causes mmap/munmap issues in drivers that change the vma->vm_pg_prot on PROT_NONE mappings. This patch reverts the PTE_FILE/PTE_PROT_NONE shift in commit 59911ca4 (ARM64: mm: Move PTE_PROT_NONE bit) and moves PTE_PROT_NONE together with the other software bits. Signed-off-by:
Steve Capper <steve.capper@linaro.org> Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Tested-by:
-
Frank Zago authored
commit 0ee005c7 upstream. This will leave a lock held after reading from the device, preventing any further reads. Signed-off-by:
Frank Zago <frank@zago.net> Signed-off-by:
Jonathan Cameron <jic23@kernel.org> Signed-off-by:
-
Michael Neuling authored
commit ec67ad82 upstream. In a recent patch: commit c13f20ac Author: Michael Neuling <mikey@neuling.org> powerpc/signals: Mark VSX not saved with small contexts We fixed an issue but an improved solution was later discussed after the patch was merged. Firstly, this patch doesn't handle the 64bit signals case, which could also hit this issue (but has never been reported). Secondly, the original patch isn't clear what MSR VSX should be set to. The new approach below always clears the MSR VSX bit (to indicate no VSX is in the context) and sets it only in the specific case where VSX is available (ie. when VSX has been used and the signal context passed has space to provide the state). This reverts the original patch and replaces it with the improved solution. It also adds a 64 bit version. Signed-off-by:
Michael Neuling <mikey@neuling.org> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
David Herrmann authored
commit 80897aa7 upstream. UHID allows short writes so user-space can omit unused fields. We automatically set them to 0 in the kernel. However, the 64/32 bit compat-handler didn't do that in the UHID_CREATE fallback. This will reveal random kernel heap data (of random size, even) to user-space. Fixes: befde022 ('HID: uhid: make creating devices work on 64/32 systems') Reported-by:
Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
David Herrmann <dh.herrmann@gmail.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
NeilBrown authored
commit 142d44c3 upstream. commit 7a0a5355 md: Don't test all of mddev->flags at once. made most tests on mddev->flags safer, but missed one. When commit 260fa034 md: avoid deadlock when dirty buffers during md_stop. added MD_STILL_CLOSED, this caused md_check_recovery to misbehave. It can think there is something to do but find nothing. This can lead to the md thread spinning during array shutdown. https://bugzilla.kernel.org/show_bug.cgi?id=65721Reported-and-tested-by:
Richard W.M. Jones <rjones@redhat.com> Fixes: 260fa034Signed-off-by:
NeilBrown <neilb@suse.de> Signed-off-by:
-
majianpeng authored
commit d206dcfa upstream. When changing group_thread_cnt from sysfs entry, the kernel can oops. The kernel messages are: [ 740.961389] BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 [ 740.961444] IP: [<ffffffff81062570>] process_one_work+0x30/0x500 [ 740.961476] PGD b9013067 PUD b651e067 PMD 0 [ 740.961503] Oops: 0000 [#1] SMP [ 740.961525] Modules linked in: netconsole e1000e ptp pps_core [ 740.961577] CPU: 0 PID: 3683 Comm: kworker/u8:5 Not tainted 3.12.0+ #23 [ 740.961602] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./To be filled by O.E.M., BIOS 080015 11/09/2011 [ 740.961646] task: ffff88013abe0000 ti: ffff88013a246000 task.ti: ffff88013a246000 [ 740.961673] RIP: 0010:[<ffffffff81062570>] [<ffffffff81062570>] process_one_work+0x30/0x500 [ 740.961708] RSP: 0018:ffff88013a247e08 EFLAGS: 00010086 [ 740.961730] RAX: ffff8800b912b400 RBX: ffff88013a61e680 RCX: ffff8800b912b400 [ 740.961757] RDX: ffff8800b912b600 RSI: ffff8800b912b600 RDI: ffff88013a61e680 [ 740.961782] RBP: ffff88013a247e48 R08: ffff88013a246000 R09: 000000000002c09d [ 740.961808] R10: 000000000000010f R11: 0000000000000000 R12: ffff88013b00cc00 [ 740.961833] R13: 0000000000000000 R14: ffff88013b00cf80 R15: ffff88013a61e6b0 [ 740.961861] FS: 0000000000000000(0000) GS:ffff88013fc00000(0000) knlGS:0000000000000000 [ 740.961893] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 740.962001] CR2: 00000000000000b8 CR3: 00000000b24fe000 CR4: 00000000000407f0 [ 740.962001] Stack: [ 740.962001] 0000000000000008 ffff8800b912b600 ffff88013b00cc00 ffff88013a61e680 [ 740.962001] ffff88013b00cc00 ffff88013b00cc18 ffff88013b00cf80 ffff88013a61e6b0 [ 740.962001] ffff88013a247eb8 ffffffff810639c6 0000000000012a80 ffff88013a247fd8 [ 740.962001] Call Trace: [ 740.962001] [<ffffffff810639c6>] worker_thread+0x206/0x3f0 [ 740.962001] [<ffffffff810637c0>] ? manage_workers+0x2c0/0x2c0 [ 740.962001] [<ffffffff81069656>] kthread+0xc6/0xd0 [ 740.962001] [<ffffffff81069590>] ? kthread_freezable_should_stop+0x70/0x70 [ 740.962001] [<ffffffff81722ffc>] ret_from_fork+0x7c/0xb0 [ 740.962001] [<ffffffff81069590>] ? kthread_freezable_should_stop+0x70/0x70 [ 740.962001] Code: 89 e5 41 57 41 56 41 55 45 31 ed 41 54 53 48 89 fb 48 83 ec 18 48 8b 06 4c 8b 67 48 48 89 c1 30 c9 a8 04 4c 0f 45 e9 80 7f 58 00 <49> 8b 45 08 44 8b b0 00 01 00 00 78 0c 41 f6 44 24 10 04 0f 84 [ 740.962001] RIP [<ffffffff81062570>] process_one_work+0x30/0x500 [ 740.962001] RSP <ffff88013a247e08> [ 740.962001] CR2: 0000000000000008 [ 740.962001] ---[ end trace 39181460000748de ]--- [ 740.962001] Kernel panic - not syncing: Fatal exception This can happen if there are some stripes left, fewer than MAX_STRIPE_BATCH. A worker is queued to handle them. But before calling raid5_do_work, raid5d handles those stripes making conf->active_stripe = 0. So mddev_suspend() can return. We might then free old worker resources before the queued raid5_do_work() handled them. When it runs, it crashes. raid5d() raid5_store_group_thread_cnt() queue_work mddev_suspend() handle_strips active_stripe=0 free(old worker resources) process_one_work raid5_do_work To avoid this, we should only flush the worker resources before freeing them. This fixes a bug introduced in 3.12 so is suitable for the 3.12.x stable series. Fixes: b721420eSigned-off-by:
Jianpeng Ma <majianpeng@gmail.com> Signed-off-by:
Shaohua Li <shli@kernel.org> Signed-off-by:
-
NeilBrown authored
commit 02e5f5c0 upstream. The various ->run routines of md personalities assume that the 'queue' has been initialised by the blk_set_stacking_limits() call in md_alloc(). However when the level is changed (by level_store()) the ->run routine for the new level is called for an array which has already had the stacking limits modified. This can result in incorrect final settings. So call blk_set_stacking_limits() before ->run in level_store(). A specific consequence of this bug is that it causes discard_granularity to be set incorrectly when reshaping a RAID4 to a RAID0. This is suitable for any -stable kernel since 3.3 in which blk_set_stacking_limits() was introduced. Reported-and-tested-by:
"Baldysiak, Pawel" <pawel.baldysiak@intel.com> Signed-off-by:
-
majianpeng authored
commit ad4068de upstream. When release_stripe() is called in grow_one_stripe(), the mddev->thread is null. So it will omit one wakeup this thread to release stripe. For this condition, use slow_path to release stripe. Bug was introduced in 3.12 Fixes: 773ca82fSigned-off-by:
-
Steve French authored
commit b1d93356 upstream. setfacl over cifs mounts can remove the default ACL when setting the (non-default part of) the ACL and vice versa (we were leaving at 0 rather than setting to -1 the count field for the unaffected half of the ACL. For example notice the setfacl removed the default ACL in this sequence: steven@steven-GA-970A-DS3:~/cifs-2.6$ getfacl /mnt/test-dir ; setfacl -m default:user:test:rwx,user:test:rwx /mnt/test-dir getfacl: Removing leading '/' from absolute path names user::rwx group::r-x other::r-x default:user::rwx default:user:test:rwx default:group::r-x default:mask::rwx default:other::r-x steven@steven-GA-970A-DS3:~/cifs-2.6$ getfacl /mnt/test-dir getfacl: Removing leading '/' from absolute path names user::rwx user:test:rwx group::r-x mask::rwx other::r-x Signed-off-by:
Steve French <smfrench@gmail.com> Acked-by:
Jeremy Allison <jra@samba.org> Signed-off-by:
-
David Herrmann authored
commit 0abda6fa upstream. The analog-stick vertical axes are inverted. Fix that! Otherwise, games and other gamepad applications need to carry their own fixups (which they thankfully haven't done, yet). Reported-by:
Rafael Brune <mail@rbrune.de> Tested-by:
-
Robert Richter authored
commit a72b8859 upstream. Register and enable interrupts after the edac registration. Otherwise incomming ecc error interrupts lead to crashes during device setup. Fixing this in drivers for mc and l2. Signed-off-by:
Robert Richter <robert.richter@linaro.org> Acked-by:
Rob Herring <rob.herring@calxeda.com> Signed-off-by:
Robert Richter <rric@kernel.org> Signed-off-by:
-
Nicholas Bellinger authored
commit 04d9cd12 upstream. This patch avoids a duplicate iscsit_increment_maxcmdsn() call for ISER_IB_RDMA_WRITE within isert_map_rdma() + isert_reg_rdma_frwr(), which will already be occuring once during isert_put_datain() -> iscsit_build_rsp_pdu() operation. It also removes the local conn->stat_sn assignment + increment, and changes the third parameter to iscsit_build_rsp_pdu() to signal this should be done by iscsi_target_mode code. Tested-by:
Moussa Ba <moussaba@micron.com> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by:
-
Jerome Glisse authored
commit 97b6ff6b upstream. GPU with low amount of ram can fails at pinning new framebuffer before unpinning old one. On such failure, retry with unpinning old one before pinning new one allowing to work around the issue. This is somewhat ugly but only affect those old GPU we care about. Signed-off-by:
Jerome Glisse <jglisse@redhat.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Alex Deucher authored
commit 958b84fb upstream. Adjust some of the TN dpm settings for stability. Enabling these features causes hangs and other stability problems on certain boards. v2: leave uvd dpm enabled Bug: https://bugzilla.kernel.org/show_bug.cgi?id=63101Signed-off-by:
-
Samuel Li authored
commit 7272c9d2 upstream. Fixes crashes when handling atif events due to the lack of a callback being registered. Signed-off-by:
Samuel Li <samuel.li@amd.com> Signed-off-by:
-
Jerome Glisse authored
commit fae009d1 upstream. Useless to count the register index in number of bytes we are writing. Fixes a regression with hw i2c enabled. Signed-off-by:
-
Alex Deucher authored
commit 70471860 upstream. Sharing PPLLs seems to cause problems on some boards. Bug: https://bugs.freedesktop.org/show_bug.cgi?id=45334Signed-off-by:
-
Christian König authored
commit 727ddc84 upstream. The parameter is in bytes not dwords. Signed-off-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
Christian König authored
commit c154a763 upstream. Make sure the UVD clocks are still active before sending the destroy message, otherwise the hw might hang. Signed-off-by:
-
Alex Deucher authored
commit d5693761 upstream. Typo in the register offset. Noticed-by:
Sylvain BERTRAND <sylware@legeek.net> Signed-off-by:
-
Ben Skeggs authored
commit 9360bd11 upstream. Signed-off-by:
Ben Skeggs <bskeggs@redhat.com> Signed-off-by:
-
Daniel Vetter authored
commit 10214420 upstream. Haswell's DDI encoders have their own ->get_config callback and in commit c6cd2ee2 Author: Jani Nikula <jani.nikula@intel.com> Date: Mon Oct 21 10:52:07 2013 +0300 drm/i915/dp: workaround BIOS eDP bpp clamping issue we've forgotten to replicate this hack. So let's do it that. Note for backporters: The above commit and all it's depencies need to be backported first. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=71049Tested-by:
Gökçen Eraslan <gokcen.eraslan@gmail.com> Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
Daniel Vetter authored
commit ef46e0d2 upstream. Some BIOS just leak the forcewak bits, which we clean up. Unfortunately this has been broken in commit 521198a2 Author: Mika Kuoppala <mika.kuoppala@linux.intel.com> Date: Fri Aug 23 16:52:30 2013 +0300 drm/i915: sanitize forcewake registers on reset To make this work both for resets and for BIOS takeover just add the forcewake clearing call back to intel_uncore_early_sanitize. We need to clear the forcewake in early sanitize so that the forcewak dance in intel_uncore_init (to figure out whether we have mt or legacy forcewake on ivb) works. That cleanup fits in nicely with the general topic of early_sanitize to prepare for the very first mmio ops. Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reported-by:
Jörg Otte <jrg.otte@gmail.com> Cc: Jörg Otte <jrg.otte@gmail.com> References: https://lkml.org/lkml/2013/11/16/40Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
-
Daniel Vetter authored
commit b2ea8ef5 upstream. Apparently they need the same treatment as primary planes. This fixes modesetting failures because of stuck cursors (!) on Thomas' i830M machine. I've figured while at it I'll also roll it out for the ivb 3 pipe version of this function. I didn't do this for i845/i865 since Bspec says the update mechanism works differently, and there's some additional rules about what can be updated in which order. Tested-by:
Thomas Richter <thor@math.tu-berlin.de> Cc: Thomas Richter <thor@math.tu-berlin.de> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Daniel Vetter authored
commit 48f34e10 upstream. The ns2501 controller seems to need the dpll and dvo port to accept the timing update commands. Quick testing on my x30 here seems to indicate that other dvo controllers don't mind. So let's move the ->mode_set callback to a place where we have the port up and running already. Tested-by:
-
Thomas Hellstrom authored
commit da95c788 upstream. All error paths will want to keep the mm node, so handle this at the function exit. This fixes an ioremap failure error path. Also add some comments to make the function a bit easier to understand. Signed-off-by:
Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by:
Jakob Bornecrantz <jakob@vmware.com> Signed-off-by:
-
Jakob Bornecrantz authored
commit 9a0599dd upstream. Fix the case where the ttm pointer may be NULL causing a NULL pointer dereference. Signed-off-by:
-
Thomas Hellstrom authored
commit 59c8e663 upstream. Also check the busy placements before deciding to move a buffer object. Failing to do this may result in a completely unneccessary move within a single memory type. Signed-off-by:
-
Thomas Hellstrom authored
commit ea029c28 upstream. Fix an error message that was incorrectly blaming device resource id shortage. Also make sure we correctly catch resource eviction errors, that could otherwise lead to evictable resources temporarily not being on the LRU list. Signed-off-by:
-
Steven Rostedt (Red Hat) authored
commit 8a56d776 upstream. Commit 8c4f3c3f "ftrace: Check module functions being traced on reload" fixed module loading and unloading with respect to function tracing, but it missed the function graph tracer. If you perform the following # cd /sys/kernel/debug/tracing # echo function_graph > current_tracer # modprobe nfsd # echo nop > current_tracer You'll get the following oops message: ------------[ cut here ]------------ WARNING: CPU: 2 PID: 2910 at /linux.git/kernel/trace/ftrace.c:1640 __ftrace_hash_rec_update.part.35+0x168/0x1b9() Modules linked in: nfsd exportfs nfs_acl lockd ipt_MASQUERADE sunrpc ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 ip6table_filter ip6_tables uinput snd_hda_codec_idt CPU: 2 PID: 2910 Comm: bash Not tainted 3.13.0-rc1-test #7 Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./To be filled by O.E.M., BIOS SDBLI944.86P 05/08/2007 0000000000000668 ffff8800787efcf8 ffffffff814fe193 ffff88007d500000 0000000000000000 ffff8800787efd38 ffffffff8103b80a 0000000000000668 ffffffff810b2b9a ffffffff81a48370 0000000000000001 ffff880037aea000 Call Trace: [<ffffffff814fe193>] dump_stack+0x4f/0x7c [<ffffffff8103b80a>] warn_slowpath_common+0x81/0x9b [<ffffffff810b2b9a>] ? __ftrace_hash_rec_update.part.35+0x168/0x1b9 [<ffffffff8103b83e>] warn_slowpath_null+0x1a/0x1c [<ffffffff810b2b9a>] __ftrace_hash_rec_update.part.35+0x168/0x1b9 [<ffffffff81502f89>] ? __mutex_lock_slowpath+0x364/0x364 [<ffffffff810b2cc2>] ftrace_shutdown+0xd7/0x12b [<ffffffff810b47f0>] unregister_ftrace_graph+0x49/0x78 [<ffffffff810c4b30>] graph_trace_reset+0xe/0x10 [<ffffffff810bf393>] tracing_set_tracer+0xa7/0x26a [<ffffffff810bf5e1>] tracing_set_trace_write+0x8b/0xbd [<ffffffff810c501c>] ? ftrace_return_to_handler+0xb2/0xde [<ffffffff811240a8>] ? __sb_end_write+0x5e/0x5e [<ffffffff81122aed>] vfs_write+0xab/0xf6 [<ffffffff8150a185>] ftrace_graph_caller+0x85/0x85 [<ffffffff81122dbd>] SyS_write+0x59/0x82 [<ffffffff8150a185>] ftrace_graph_caller+0x85/0x85 [<ffffffff8150a2d2>] system_call_fastpath+0x16/0x1b ---[ end trace 940358030751eafb ]--- The above mentioned commit didn't go far enough. Well, it covered the function tracer by adding checks in __register_ftrace_function(). The problem is that the function graph tracer circumvents that (for a slight efficiency gain when function graph trace is running with a function tracer. The gain was not worth this). The problem came with ftrace_startup() which should always be called after __register_ftrace_function(), if you want this bug to be completely fixed. Anyway, this solution moves __register_ftrace_function() inside of ftrace_startup() and removes the need to call them both. Reported-by:
Dave Wysochanski <dwysocha@redhat.com> Fixes: ed926f9b ("ftrace: Use counters to enable functions to trace") Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
Mattia Dongili authored
commit b975dc36 upstream. Follow-up to commit 294d31e8 ("sony-laptop: don't change keyboard backlight settings"): avoid messing up the state on resume. Leave it to what was before suspending as it's anyway likely that we still don't know what value we should write to the EC registers. This fix is also required in 3.12 Tested-by:
Karol Babioch <karol@babioch.de> Signed-off-by:
Mattia Dongili <malattia@linux.it> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Tim Harvey authored
commit 88baf714 upstream. prior to week 08 of 2013 Freescale misprogrammed between 1 and 3% of PFUZE1000 parts with a ID=0x8 instead of the expected ID=0x0 Signed-off-by:
Tim Harvey <tharvey@gateworks.com> Signed-off-by:
Mark Brown <broonie@linaro.org> Signed-off-by:
-
Dan Williams authored
commit 8e3ffa47 upstream. Userspace uses the netdev devtype for stuff like device naming and type detection. Be nice and set it. Remove the pointless #if/#endif around SET_NETDEV_DEV too. Signed-off-by:
Dan Williams <dcbw@redhat.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com> Signed-off-by:
-
