- 14 Feb, 2011 6 commits
-
-
Marek Olšák authored
This is an important security fix because we allowed arbitrary values to be passed to AARESOLVE_OFFSET. This also puts the right buffer address in the register. Signed-off-by:
Marek Olšák <maraeo@gmail.com> Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
Marek Olšák authored
Also move ZB_DEPTHCLEARVALUE to the list of safe regs. Signed-off-by:
-
Alex Deucher authored
Not only is linear aligned supposedly more performant, linear general is only supported by the CB in single slice mode. The texture hardware doesn't support linear general, but I think the hw automatically upgrades it to linear aligned. Signed-off-by:
Alex Deucher <alexdeucher@gmail.com> Signed-off-by:
-
Alex Deucher authored
Not only is linear aligned supposedly more performant, linear general is only supported by the CB in single slice mode. The texture hardware doesn't support linear general, but I think the hw automatically upgrades it to linear aligned. Signed-off-by:
-
Dave Airlie authored
My evergreen has been in a remote PC for week and reset has never once saved me from certain doom, I finally relocated to the box with a serial cable and noticed an oops when the GPU resets, and the TTM delayed delete thread tries to remove something from the GTT. This stops the delayed delete thread from executing across the GPU reset handler, and woot I can GPU reset now. Signed-off-by: -
Alex Deucher authored
Based on 6xx/7xx endian fixes from Cédric Cano. v2: fix typo in shader Signed-off-by:
-
- 13 Feb, 2011 15 commits
-
-
Cédric Cano authored
agd5f: minor cleanups Signed-off-by:
Cédric Cano <ccano@interfaceconcept.com> Signed-off-by:
-
Cédric Cano authored
agd5f: additional cleanups/fixes Signed-off-by:
-
Cédric Cano authored
agd5f: minor cleanups Signed-off-by:
-
Marek Olšák authored
The colorbuffer, zbuffer, and texture states are checked only once when they get changed. This improves performance in the apps which emit lots of draw packets and few state changes. This drops performance in glxgears by a 1% or so, but glxgears is not a benchmark we care about. The time spent in the kernel when running Torcs dropped from 33% to 23% and the frame rate is higher, which is a good thing. r600 might need something like this as well. Signed-off-by:
-
Kees Cook authored
In the continuing effort to avoid kernel addresses leaking to unprivileged users, this patch switches to %pK for /proc/dri/*/vma. Signed-off-by:
Kees Cook <kees.cook@canonical.com> Signed-off-by:
-
Alex Deucher authored
PPC Mac cards do not provide connector tables in their vbios. Their connector/encoder configurations must be hardcoded in the driver. verified by nyef on #radeon Signed-off-by:
-
Jesper Juhl authored
drivers/gpu/drm/radeon/mkregtable.c:parser_auth() almost always remembers to fclose(file) before returning, but it misses two spots. This is not really important since the process will exit shortly after and thus close the file for us, but being explicit prevents static analysis tools from complaining about leaked memory and missing fclose() calls and it also seems to be the prefered style of the existing code to explicitly close the file. So, here's a patch to add the two missing fclose() calls. Signed-off-by:
Jesper Juhl <jj@chaosbits.net> Signed-off-by:
-
Alex Deucher authored
- set scaler table clears the interleave bit, need to reset it in encoder quirks, this was already done for pre-dce4. - remove the interleave settings from set_base() functions this is now handled in the encoder quirks functions, and isn't technically part of the display base setup. - rename evergreen_do_set_base() to dce4_do_set_base() since it's used on both evergreen and NI asics. Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=28182Signed-off-by:
-
Dave Airlie authored
The old code dereferenced a value, the new code just needs to pass the ptr. fixes an oops looking at files in debugfs. cc: stable@kernel.org Signed-off-by: -
git://git.secretlab.ca/git/linux-2.6Linus Torvalds authored
* 'spi/merge' of git://git.secretlab.ca/git/linux-2.6: devicetree-discuss is moderated for non-subscribers MAINTAINERS: Add entry for GPIO subsystem dt: add documentation of ARM dt boot interface dt: Remove obsolete description of powerpc boot interface dt: Move device tree documentation out of powerpc directory spi/spi_sh_msiof: fix wrong address calculation, which leads to an Oops
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: hda - add quirk for Ordissimo EVE using a realtek ALC662 ALSA: hrtimer: remove superfluous tasklet invocation ALSA: hrtimer: handle delayed timer interrupts ALSA: HDA: Add subwoofer quirk for Acer Aspire 8942G ALSA: hda - Don't handle empty patch files ALSA: hda - Fix missing CA initialization for HDMI/DP ALSA: usbaudio - Enable the E-MU 0204 USB ALSA: hda - switch lfe with side in mixer for 4930g ASoC: Improve WM8994 digital power sequencing ASoC: Create an AIF1ADCDAT signal widget to match AIF2 asoc: davinci: da830/omap-l137: correct cpu_dai_name ASoC: fill in snd_soc_pcm_runtime.card before calling snd_soc_dai_link.init()
-
Linus Torvalds authored
This reverts commit 47970b1b. It turns out it breaks several distributions. Looks like the stricter selinux checks fail due to selinux policies not being set to allow the access - breaking X, but also lspci. So while the change was clearly the RightThing(tm) to do in theory, in practice we have backwards compatibility issues making it not work. Reported-by:
Dave Young <hidave.darkstar@gmail.com> Acked-by:
David Airlie <airlied@linux.ie> Acked-by:
Alex Riesen <raa.lkml@gmail.com> Cc: Eric Paris <eparis@redhat.com> Cc: Chris Wright <chrisw@sous-sol.org> Cc: James Morris <jmorris@namei.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Takashi Iwai authored
-
Grant Likely authored
-
Paul Bolle authored
Signed-off-by:
Paul Bolle <pebolle@tiscali.nl> Signed-off-by:
Grant Likely <grant.likely@secretlab.ca>
-
- 12 Feb, 2011 19 commits
-
-
Grant Likely authored
I'll probably regret this.... Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4Linus Torvalds authored
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: jbd2: call __jbd2_log_start_commit with j_state_lock write locked ext4: serialize unaligned asynchronous DIO ext4: make grpinfo slab cache names static ext4: Fix data corruption with multi-block writepages support ext4: fix up ext4 error handling ext4: unregister features interface on module unload ext4: fix panic on module unload when stopping lazyinit thread
-
Theodore Ts'o authored
On an SMP ARM system running ext4, I've received a report that the first J_ASSERT in jbd2_journal_commit_transaction has been triggering: J_ASSERT(journal->j_running_transaction != NULL); While investigating possible causes for this problem, I noticed that __jbd2_log_start_commit() is getting called with j_state_lock only read-locked, in spite of the fact that it's possible for it might j_commit_request. Fix this by grabbing the necessary information so we can test to see if we need to start a new transaction before dropping the read lock, and then calling jbd2_log_start_commit() which will grab the write lock. Signed-off-by:"Theodore Ts'o" <tytso@mit.edu>
-
Eric Sandeen authored
ext4 has a data corruption case when doing non-block-aligned asynchronous direct IO into a sparse file, as demonstrated by xfstest 240. The root cause is that while ext4 preallocates space in the hole, mappings of that space still look "new" and dio_zero_block() will zero out the unwritten portions. When more than one AIO thread is going, they both find this "new" block and race to zero out their portion; this is uncoordinated and causes data corruption. Dave Chinner fixed this for xfs by simply serializing all unaligned asynchronous direct IO. I've done the same here. The difference is that we only wait on conversions, not all IO. This is a very big hammer, and I'm not very pleased with stuffing this into ext4_file_write(). But since ext4 is DIO_LOCKING, we need to serialize it at this high level. I tried to move this into ext4_ext_direct_IO, but by then we have the i_mutex already, and we will wait on the work queue to do conversions - which must also take the i_mutex. So that won't work. This was originally exposed by qemu-kvm installing to a raw disk image with a normal sector-63 alignment. I've tested a backport of this patch with qemu, and it does avoid the corruption. It is also quite a lot slower (14 min for package installs, vs. 8 min for well-aligned) but I'll take slow correctness over fast corruption any day. Mingming suggested that we can track outstanding conversions, and wait on those so that non-sparse files won't be affected, and I've implemented that here; unaligned AIO to nonsparse files won't take a perf hit. [tytso@mit.edu: Keep the mutex as a hashed array instead of bloating the ext4 inode] [tytso@mit.edu: Fix up namespace issues so that global variables are protected with an "ext4_" prefix.] Signed-off-by:
Eric Sandeen <sandeen@redhat.com> Signed-off-by:
-
Eric Sandeen authored
In 2.6.37 I was running into oopses with repeated module loads & unloads. I tracked this down to: fb1813f4 ext4: use dedicated slab caches for group_info structures (this was in addition to the features advert unload problem) The kstrdup & subsequent kfree of the cache name was causing a double free. In slub, at least, if I read it right it allocates & frees the name itself, slab seems to do something different... so in slub I think we were leaking -our- cachep->name, and double freeing the one allocated by slub. After getting lost in slab/slub/slob a bit, I just looked at other sized-caches that get allocated. jbd2, biovec, sgpool all do it more or less the way jbd2 does. Below patch follows the jbd2 method of dynamically allocating a cache at mount time from a list of static names. (This might also possibly fix a race creating the caches with parallel mounts running). [Folded in a fix from Dan Carpenter which fixed an off-by-one error in the original patch] Cc: stable@kernel.org Signed-off-by:
-
Grant Likely authored
I'll probably regret this.... Signed-off-by: -
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
* 'kvm-updates/2.6.38' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: SVM: Make sure KERNEL_GS_BASE is valid when loading gs_index
-
git://git.kernel.org/pub/scm/linux/kernel/git/bp/bpLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: amd64_edac: Fix DIMMs per DCTs output
-
git://git.kernel.org/pub/scm/linux/kernel/git/teigland/dlmLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/dlm: dlm: use single thread workqueues
-
git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6: cifs: don't always drop malformed replies on the floor (try #3) cifs: clean up checks in cifs_echo_request [CIFS] Do not send SMBEcho requests on new sockets until SMBNegotiate
-
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/stagingLinus Torvalds authored
* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging: hwmon: (emc1403) Fix I2C address range hwmon: (lm63) Consider LM64 temperature offset
-
Linus Torvalds authored
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6: pci: use security_capable() when checking capablities during config space read security: add cred argument to security_capable() tpm_tis: Use timeouts returned from TPM
-
Linus Torvalds authored
Merge branch 's5p-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung * 's5p-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: SAMSUNG: Ensure struct sys_device is declared in plat/pm.h ARM: S5PV310: Cleanup System MMU ARM: S5PV310: Add support System MMU on SMDKV310
-
git://git.monstr.eu/linux-2.6-microblazeLinus Torvalds authored
* 'next' of git://git.monstr.eu/linux-2.6-microblaze: microblaze: Fix msr instruction detection microblaze: Fix pte_update function microblaze: Fix asm compilation warning microblaze: Fix IRQ flag handling for MSR=0
-
Julia Lawall authored
This code makes two calls to clk_get, then test both return values and fails if either failed. The problem is that in the first inner if, where the first call to clk_get has failed, it don't know if the second call has failed as well. So it don't know whether clk_get should be called on the result of the second call. Of course, it would be possible to test that value again. A simpler solution is just to test the result of calling clk_get directly after each call. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r@ position p1,p2; expression e; statement S; @@ e = clk_get@p1(...) ... if@p2 (IS_ERR(e)) S @@ expression e; statement S; identifier l; position r.p1, p2 != r.p2; @@ *e = clk_get@p1(...) ... when != clk_put(e) *if@p2 (...) { ... when != clk_put(e) * return ...; }// </smpl> Signed-off-by:
Julia Lawall <julia@diku.dk> Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Acked-by:
Tony Lindgren <tony@atomide.com> Acked-by:
Amit Kucheria <amit.kucheria@canonical.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
KAMEZAWA Hiroyuki authored
mem_cgroup_uncharge_page() should be called in all failure cases after mem_cgroup_charge_newpage() is called in huge_memory.c::collapse_huge_page() [ 4209.076861] BUG: Bad page state in process khugepaged pfn:1e9800 [ 4209.077601] page:ffffea0006b14000 count:0 mapcount:0 mapping: (null) index:0x2800 [ 4209.078674] page flags: 0x40000000004000(head) [ 4209.079294] pc:ffff880214a30000 pc->flags:2146246697418756 pc->mem_cgroup:ffffc9000177a000 [ 4209.082177] (/A) [ 4209.082500] Pid: 31, comm: khugepaged Not tainted 2.6.38-rc3-mm1 #1 [ 4209.083412] Call Trace: [ 4209.083678] [<ffffffff810f4454>] ? bad_page+0xe4/0x140 [ 4209.084240] [<ffffffff810f53e6>] ? free_pages_prepare+0xd6/0x120 [ 4209.084837] [<ffffffff8155621d>] ? rwsem_down_failed_common+0xbd/0x150 [ 4209.085509] [<ffffffff810f5462>] ? __free_pages_ok+0x32/0xe0 [ 4209.086110] [<ffffffff810f552b>] ? free_compound_page+0x1b/0x20 [ 4209.086699] [<ffffffff810fad6c>] ? __put_compound_page+0x1c/0x30 [ 4209.087333] [<ffffffff810fae1d>] ? put_compound_page+0x4d/0x200 [ 4209.087935] [<ffffffff810fb015>] ? put_page+0x45/0x50 [ 4209.097361] [<ffffffff8113f779>] ? khugepaged+0x9e9/0x1430 [ 4209.098364] [<ffffffff8107c870>] ? autoremove_wake_function+0x0/0x40 [ 4209.099121] [<ffffffff8113ed90>] ? khugepaged+0x0/0x1430 [ 4209.099780] [<ffffffff8107c236>] ? kthread+0x96/0xa0 [ 4209.100452] [<ffffffff8100dda4>] ? kernel_thread_helper+0x4/0x10 [ 4209.101214] [<ffffffff8107c1a0>] ? kthread+0x0/0xa0 [ 4209.101842] [<ffffffff8100dda0>] ? kernel_thread_helper+0x0/0x10 Signed-off-by:
KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Acked-by:
Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Reviewed-by:
Johannes Weiner <hannes@cmpxchg.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Reviewed-by:
Minchan Kim <minchan.kim@gmail.com> Signed-off-by:
-
Johannes Weiner authored
Commit 3e7d3449 ("mm: vmscan: reclaim order-0 and use compaction instead of lumpy reclaim") introduced an indefinite loop in shrink_zone(). It meant to break out of this loop when no pages had been reclaimed and not a single page was even scanned. The way it would detect the latter is by taking a snapshot of sc->nr_scanned at the beginning of the function and comparing it against the new sc->nr_scanned after the scan loop. But it would re-iterate without updating that snapshot, looping forever if sc->nr_scanned changed at least once since shrink_zone() was invoked. This is not the sole condition that would exit that loop, but it requires other processes to change the zone state, as the reclaimer that is stuck obviously can not anymore. This is only happening for higher-order allocations, where reclaim is run back to back with compaction. Signed-off-by:
Michal Hocko <mhocko@suse.cz> Tested-by: Kent Overstreet<kent.overstreet@gmail.com> Reported-by:
Kent Overstreet <kent.overstreet@gmail.com> Acked-by:
Mel Gorman <mel@csn.ul.ie> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Rik van Riel <riel@redhat.com> Reviewed-by:
-
Michel Lespinasse authored
If the page is going to be written to, __do_page needs to break COW. However, the old page (before breaking COW) was never mapped mapped into the current pte (__do_fault is only called when the pte is not present), so vmscan can't have marked the old page as PageMlocked due to being mapped in __do_fault's VMA. Therefore, __do_fault() does not need to worry about clearing PageMlocked() on the old page. Signed-off-by:
Michel Lespinasse <walken@google.com> Reviewed-by:
Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by:
-
Michel Lespinasse authored
vmscan can lazily find pages that are mapped within VM_LOCKED vmas, and set the PageMlocked bit on these pages, transfering them onto the unevictable list. When do_wp_page() breaks COW within a VM_LOCKED vma, it may need to clear PageMlocked on the old page and set it on the new page instead. This change fixes an issue where do_wp_page() was clearing PageMlocked on the old page while the pte was still pointing to it (as well as rmap). Therefore, we were not protected against vmscan immediately transfering the old page back onto the unevictable list. This could cause pages to get stranded there forever. I propose to move the corresponding code to the end of do_wp_page(), after the pte (and rmap) have been pointed to the new page. Additionally, we can use munlock_vma_page() instead of clear_page_mlock(), so that the old page stays mlocked if there are still other VM_LOCKED vmas mapping it. Signed-off-by:
-
