Pull NTB fixes from Jon Mason:
 "NTB bug fixes to address an incorrect ntb_mw_count reference in the
  NTB transport, improperly bringing down the link if SPADs are
  corrupted, and an out-of-order issue regarding link negotiation and
  data passing"

* tag 'ntb-4.13-bugfixes' of git://github.com/jonmason/ntb:
  ntb: ntb_test: ensure the link is up before trying to configure the mws
  ntb: transport shouldn't disable link due to bogus values in SPADs
  ntb: use correct mw_count function in ntb_tool and ntb_transport

The "lock_page_killable()" function waits for exclusive access to the
page lock bit using the WQ_FLAG_EXCLUSIVE bit in the waitqueue entry
set.

That means that if it gets woken up, other waiters may have been
skipped.

That, in turn, means that if it sees the page being unlocked, it *must*
take that lock and return success, even if a lethal signal is also
pending.

So instead of checking for lethal signals first, we need to check for
them after we've checked the actual bit that we were waiting for.  Even
if that might then delay the killing of the process.

This matches the order of the old "wait_on_bit_lock()" infrastructure
that the page locking used to use (and is still used in a few other
areas).

Note that if we still return an error after having unsuccessfully tried
to acquire the page lock, that is ok: that means that some other thread
was able to get ahead of us and lock the page, and when that other
thread then unlocks the page, the wakeup event will be repeated.  So any
other pending waiters will now get properly woken up.

Fixes: 62906027 ("mm: add PageWaiters indicating tasks are waiting for a page bit")
Cc: Nick Piggin <npiggin@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Jan Kara <jack@suse.cz>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Tim Chen and Kan Liang have been battling a customer load that shows
extremely long page wakeup lists.  The cause seems to be constant NUMA
migration of a hot page that is shared across a lot of threads, but the
actual root cause for the exact behavior has not been found.

Tim has a patch that batches the wait list traversal at wakeup time, so
that we at least don't get long uninterruptible cases where we traverse
and wake up thousands of processes and get nasty latency spikes.  That
is likely 4.14 material, but we're still discussing the page waitqueue
specific parts of it.

In the meantime, I've tried to look at making the page wait queues less
expensive, and failing miserably.  If you have thousands of threads
waiting for the same page, it will be painful.  We'll need to try to
figure out the NUMA balancing issue some day, in addition to avoiding
the excessive spinlock hold times.

That said, having tried to rewrite the page wait queues, I can at least
fix up some of the braindamage in the current situation. In particular:

 (a) we don't want to continue walking the page wait list if the bit
     we're waiting for already got set again (which seems to be one of
     the patterns of the bad load).  That makes no progress and just
     causes pointless cache pollution chasing the pointers.

 (b) we don't want to put the non-locking waiters always on the front of
     the queue, and the locking waiters always on the back.  Not only is
     that unfair, it means that we wake up thousands of reading threads
     that will just end up being blocked by the writer later anyway.

Also add a comment about the layout of 'struct wait_page_key' - there is
an external user of it in the cachefiles code that means that it has to
match the layout of 'struct wait_bit_key' in the two first members.  It
so happens to match, because 'struct page *' and 'unsigned long *' end
up having the same values simply because the page flags are the first
member in struct page.

Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Christopher Lameter <cl@linux.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

We have a MAX_LFS_FILESIZE macro that is meant to be filled in by
filesystems (and other IO targets) that know they are 64-bit clean and
don't have any 32-bit limits in their IO path.

It turns out that our 32-bit value for that limit was bogus.  On 32-bit,
the VM layer is limited by the page cache to only 32-bit index values,
but our logic for that was confusing and actually wrong.  We used to
define that value to

	(((loff_t)PAGE_SIZE << (BITS_PER_LONG-1))-1)

which is actually odd in several ways: it limits the index to 31 bits,
and then it limits files so that they can't have data in that last byte
of a page that has the highest 31-bit index (ie page index 0x7fffffff).

Neither of those limitations make sense.  The index is actually the full
32 bit unsigned value, and we can use that whole full page.  So the
maximum size of the file would logically be "PAGE_SIZE << BITS_PER_LONG".

However, we do wan tto avoid the maximum index, because we have code
that iterates over the page indexes, and we don't want that code to
overflow.  So the maximum size of a file on a 32-bit host should
actually be one page less than the full 32-bit index.

So the actual limit is ULONG_MAX << PAGE_SHIFT.  That means that we will
not actually be using the page of that last index (ULONG_MAX), but we
can grow a file up to that limit.

The wrong value of MAX_LFS_FILESIZE actually caused problems for Doug
Nazar, who was still using a 32-bit host, but with a 9.7TB 2 x RAID5
volume.  It turns out that our old MAX_LFS_FILESIZE was 8TiB (well, one
byte less), but the actual true VM limit is one page less than 16TiB.

This was invisible until commit c2a9737f ("vfs,mm: fix a dead loop
in truncate_inode_pages_range()"), which started applying that
MAX_LFS_FILESIZE limit to block devices too.

NOTE! On 64-bit, the page index isn't a limiter at all, and the limit is
actually just the offset type itself (loff_t), which is signed.  But for
clarity, on 64-bit, just use the maximum signed value, and don't make
people have to count the number of 'f' characters in the hex constant.

So just use LLONG_MAX for the 64-bit case.  That was what the value had
been before too, just written out as a hex constant.

Fixes: c2a9737f ("vfs,mm: fix a dead loop in truncate_inode_pages_range()")
Reported-and-tested-by: Doug Nazar <nazard@nazar.ca>
Cc: Andreas Dilger <adilger@dilger.ca>
Cc: Mark Fasheh <mfasheh@versity.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Dave Kleikamp <shaggy@kernel.org>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull input fixes from Dmitry Torokhov:

 - a tweak to the IBM Trackpoint driver that helps recognizing
   trackpoints on never Lenovo Carbons

 - a fix to the ALPS driver solving scroll issues on some Dells

 - yet another ACPI ID has been added to Elan I2C toucpad driver

 - quieted diagnostic message in soc_button_array driver

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: ALPS - fix two-finger scroll breakage in right side on ALPS touchpad
  Input: soc_button_array - silence -ENOENT error on Dell XPS13 9365
  Input: trackpoint - add new trackpoint firmware ID
  Input: elan_i2c - add ELAN0602 ACPI ID to support Lenovo Yoga310

Pull PCI fix from Bjorn Helgaas:
 "Remove needlessly alarming MSI affinity warning (this is not actually
  a bug fix, but the warning prompts unnecessary bug reports)"

* tag 'pci-v4.13-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  PCI/MSI: Don't warn when irq_create_affinity_masks() returns NULL

Pull x86 fixes from Ingo Molnar:
 "Two fixes: one for an ldt_struct handling bug and a cherry-picked
  objtool fix"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mm: Fix use-after-free of ldt_struct
  objtool: Fix '-mtune=atom' decoding support in objtool 2.0

Pull timer fix from Ingo Molnar:
 "Fix a timer granularity handling race+bug, which would manifest itself
  by spuriously increasing timeouts of some timers (from 1 jiffy to ~500
  jiffies in the worst case measured) in certain nohz states"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  timers: Fix excessive granularity of new timers after a nohz idle

Pull perf fix from Ingo Molnar:
 "A single fix to not allow nonsensical event groups that result in
  kernel warnings"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/core: Fix group {cpu,task} validation

Merge misc fixes from Andrew Morton:
 "6 fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  mm/memblock.c: reversed logic in memblock_discard()
  fork: fix incorrect fput of ->exe_file causing use-after-free
  mm/madvise.c: fix freeing of locked page with MADV_FREE
  dax: fix deadlock due to misaligned PMD faults
  mm, shmem: fix handling /sys/kernel/mm/transparent_hugepage/shmem_enabled
  PM/hibernate: touch NMI watchdog when creating snapshot

Pull Paolo Bonzini:
 "Bugfixes for x86, PPC and s390"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: PPC: Book3S: Fix race and leak in kvm_vm_ioctl_create_spapr_tce()
  KVM, pkeys: do not use PKRU value in vcpu->arch.guest_fpu.state
  KVM: x86: simplify handling of PKRU
  KVM: x86: block guest protection keys unless the host has them enabled
  KVM: PPC: Book3S HV: Add missing barriers to XIVE code and document them
  KVM: PPC: Book3S HV: Workaround POWER9 DD1.0 bug causing IPB bit loss
  KVM: PPC: Book3S HV: Use msgsync with hypervisor doorbells on POWER9
  KVM: s390: sthyi: fix specification exception detection
  KVM: s390: sthyi: fix sthyi inline assembly

Pull virtio fixes from Michael Tsirkin:
 "Fixes two obvious bugs in virtio pci"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  virtio_pci: fix cpu affinity support
  virtio_blk: fix incorrect message when disk is resized

Pull powerpc fix from Michael Ellerman:
 "Just one fix, to add a barrier in the switch_mm() code to make sure
  the mm cpumask update is ordered vs the MMU starting to load
  translations. As far as we know no one's actually hit the bug, but
  that's just luck.

  Thanks to Benjamin Herrenschmidt, Nicholas Piggin"

* tag 'powerpc-4.13-8' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/mm: Ensure cpumask update is ordered

Pull nfsd fixes from Bruce Fields:
 "Two nfsd bugfixes, neither 4.13 regressions, but both potentially
  serious"

* tag 'nfsd-4.13-2' of git://linux-nfs.org/~bfields/linux:
  net: sunrpc: svcsock: fix NULL-pointer exception
  nfsd: Limit end of page list when decoding NFSv4 WRITE

Pull cifs fixes from Steve French:
 "Some bug fixes for stable for cifs"

* tag 'cifs-fixes-for-4.13-rc6-and-stable' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: return ENAMETOOLONG for overlong names in cifs_open()/cifs_lookup()
  cifs: Fix df output for users with quota limits

Pull MTD fixes from Brian Norris:
 "Two fixes - one for a 4.13 regression, and the other for an older one:

   - Atmel NAND: since we started utilizing ONFI timings, we found that
     we were being too restrict at rejecting them, partly due to
     discrepancies in ONFI 4.0 and earlier versions. Relax the
     restriction to keep these platforms booting. This is a 4.13-rc1
     regression.

   - nandsim: repeated probe/removal may not work after a failed init,
     because we didn't free up our debugfs files properly on the failure
     path. This has been around since 3.8, but it's nice to get this
     fixed now in a nice easy patch that can target -stable, since
     there's already refactoring work (that also fixes the issue)
     targeted for the next merge window"

* tag 'for-linus-20170825' of git://git.infradead.org/linux-mtd:
  mtd: nand: atmel: Relax tADL_min constraint
  mtd: nandsim: remove debugfs entries in error path

Pull block fixes from Jens Axboe:
 "A small batch of fixes that should be included for the 4.13 release.
  This contains:

   - Revert of the 4k loop blocksize support. Even with a recent batch
     of 4 fixes, we're still not really happy with it. Rather than be
     stuck with an API issue, let's revert it and get it right for 4.14.

   - Trivial patch from Bart, adding a few flags to the blk-mq debugfs
     exports that were added in this release, but not to the debugfs
     parts.

   - Regression fix for bsg, fixing a potential kernel panic. From
     Benjamin.

   - Tweak for the blk throttling, improving how we account discards.
     From Shaohua"

* 'for-linus' of git://git.kernel.dk/linux-block:
  blk-mq-debugfs: Add names for recently added flags
  bsg-lib: fix kernel panic resulting from missing allocation of reply-buffer
  Revert "loop: support 4k physical blocksize"
  blk-throttle: cap discard request size

Pull i2c fixes from Wolfram Sang:
 "I2C has some bugfixes for you: mainly Jarkko fixed up a few things in
  the designware driver regarding the new slave mode. But Ulf also fixed
  a long-standing and now agreed suspend problem. Plus, some simple
  stuff which nonetheless needs fixing"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: designware: Fix runtime PM for I2C slave mode
  i2c: designware: Remove needless pm_runtime_put_noidle() call
  i2c: aspeed: fixed potential null pointer dereference
  i2c: simtec: use release_mem_region instead of release_resource
  i2c: core: Make comment about I2C table requirement to reflect the code
  i2c: designware: Fix standard mode speed when configuring the slave mode
  i2c: designware: Fix oops from i2c_dw_irq_handler_slave
  i2c: designware: Fix system suspend

irq_create_affinity_masks() can return NULL on non-SMP systems, when there
are not enough "free" vectors available to spread, or if memory allocation
for the CPU masks fails.  Only the allocation failure is of interest, and
even then the system will work just fine except for non-optimally spread
vectors.  Thus remove the warnings.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: David S. Miller <davem@davemloft.net>

Pull MMC fix from Ulf Hansson:
 "MMC core: don't return error code R1_OUT_OF_RANGE for open-ending mode"

* tag 'mmc-v4.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: block: prevent propagating R1_OUT_OF_RANGE for open-ending mode

Pull sound fixes from Takashi Iwai:
 "We're keeping in a good shape, this batch contains just a few small
  fixes (a regression fix for ASoC rt5677 codec, NULL dereference and
  error-path fixes in firewire, and a corner-case ioctl error fix for
  user TLV), as well as usual quirks for USB-audio and HD-audio"

* tag 'sound-4.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ASoC: rt5677: Reintroduce I2C device IDs
  ALSA: hda - Add stereo mic quirk for Lenovo G50-70 (17aa:3978)
  ALSA: core: Fix unexpected error at replacing user TLV
  ALSA: usb-audio: Add delay quirk for H650e/Jabra 550a USB headsets
  ALSA: firewire-motu: destroy stream data surely at failure of card initialization
  ALSA: firewire: fix NULL pointer dereference when releasing uninitialized data of iso-resource

Pull dmaengine fix from Vinod Koul:
 "A single fix for tegra210-adma driver to check of_irq_get() error"

* tag 'dmaengine-fix-4.13-rc7' of git://git.infradead.org/users/vkoul/slave-dma:
  dmaengine: tegra210-adma: fix of_irq_get() error check

Pull drm fixes from Dave Airlie:
 "Fixes for rc7, nothing too crazy, some core, i915, and sunxi fixes,
  Intel CI has been responsible for some of these fixes being required"

* tag 'drm-fixes-for-v4.13-rc7' of git://people.freedesktop.org/~airlied/linux:
  drm/i915/gvt: Fix the kernel null pointer error
  drm: Release driver tracking before making the object available again
  drm/i915: Clear lost context-switch interrupts across reset
  drm/i915/bxt: use NULL for GPIO connection ID
  drm/i915/cnl: Fix LSPCON support.
  drm/i915/vbt: ignore extraneous child devices for a port
  drm/i915: Initialize 'data' in intel_dsi_dcs_backlight.c
  drm/atomic: If the atomic check fails, return its value first
  drm/atomic: Handle -EDEADLK with out-fences correctly
  drm: Fix framebuffer leak
  drm/imx: ipuv3-plane: fix YUV framebuffer scanout on the base plane
  gpu: ipu-v3: add DRM dependency
  drm/rockchip: Fix suspend crash when drm is not bound
  drm/sun4i: Implement drm_driver lastclose to restore fbdev console

In recently introduced memblock_discard() there is a reversed logic bug.
Memory is freed of static array instead of dynamically allocated one.

Link: http://lkml.kernel.org/r/1503511441-95478-2-git-send-email-pasha.tatashin@oracle.com
Fixes: 3010f876 ("mm: discard memblock data later")
Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com>
Reported-by: Woody Suwalski <terraluna977@gmail.com>
Tested-by: Woody Suwalski <terraluna977@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit 7c051267 ("mm, fork: make dup_mmap wait for mmap_sem for
write killable") made it possible to kill a forking task while it is
waiting to acquire its ->mmap_sem for write, in dup_mmap().

However, it was overlooked that this introduced an new error path before
a reference is taken on the mm_struct's ->exe_file.  Since the
->exe_file of the new mm_struct was already set to the old ->exe_file by
the memcpy() in dup_mm(), it was possible for the mmput() in the error
path of dup_mm() to drop a reference to ->exe_file which was never
taken.

This caused the struct file to later be freed prematurely.

Fix it by updating mm_init() to NULL out the ->exe_file, in the same
place it clears other things like the list of mmaps.

This bug was found by syzkaller.  It can be reproduced using the
following C program:

    #define _GNU_SOURCE
    #include <pthread.h>
    #include <stdlib.h>
    #include <sys/mman.h>
    #include <sys/syscall.h>
    #include <sys/wait.h>
    #include <unistd.h>

    static void *mmap_thread(void *_arg)
    {
        for (;;) {
            mmap(NULL, 0x1000000, PROT_READ,
                 MAP_POPULATE|MAP_ANONYMOUS|MAP_PRIVATE, -1, 0);
        }
    }

    static void *fork_thread(void *_arg)
    {
        usleep(rand() % 10000);
        fork();
    }

    int main(void)
    {
        fork();
        fork();
        fork();
        for (;;) {
            if (fork() == 0) {
                pthread_t t;

                pthread_create(&t, NULL, mmap_thread, NULL);
                pthread_create(&t, NULL, fork_thread, NULL);
                usleep(rand() % 10000);
                syscall(__NR_exit_group, 0);
            }
            wait(NULL);
        }
    }

No special kernel config options are needed.  It usually causes a NULL
pointer dereference in __remove_shared_vm_struct() during exit, or in
dup_mmap() (which is usually inlined into copy_process()) during fork.
Both are due to a vm_area_struct's ->vm_file being used after it's
already been freed.

Google Bug Id: 64772007

Link: http://lkml.kernel.org/r/20170823211408.31198-1-ebiggers3@gmail.com
Fixes: 7c051267 ("mm, fork: make dup_mmap wait for mmap_sem for write killable")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>	[v4.7+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

If madvise(..., MADV_FREE) split a transparent hugepage, it called
put_page() before unlock_page().

This was wrong because put_page() can free the page, e.g. if a
concurrent madvise(..., MADV_DONTNEED) has removed it from the memory
mapping. put_page() then rightfully complained about freeing a locked
page.

Fix this by moving the unlock_page() before put_page().

This bug was found by syzkaller, which encountered the following splat:

    BUG: Bad page state in process syzkaller412798  pfn:1bd800
    page:ffffea0006f60000 count:0 mapcount:0 mapping:          (null) index:0x20a00
    flags: 0x200000000040019(locked|uptodate|dirty|swapbacked)
    raw: 0200000000040019 0000000000000000 0000000000020a00 00000000ffffffff
    raw: ffffea0006f60020 ffffea0006f60020 0000000000000000 0000000000000000
    page dumped because: PAGE_FLAGS_CHECK_AT_FREE flag(s) set
    bad because of flags: 0x1(locked)
    Modules linked in:
    CPU: 1 PID: 3037 Comm: syzkaller412798 Not tainted 4.13.0-rc5+ #35
    Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
    Call Trace:
     __dump_stack lib/dump_stack.c:16 [inline]
     dump_stack+0x194/0x257 lib/dump_stack.c:52
     bad_page+0x230/0x2b0 mm/page_alloc.c:565
     free_pages_check_bad+0x1f0/0x2e0 mm/page_alloc.c:943
     free_pages_check mm/page_alloc.c:952 [inline]
     free_pages_prepare mm/page_alloc.c:1043 [inline]
     free_pcp_prepare mm/page_alloc.c:1068 [inline]
     free_hot_cold_page+0x8cf/0x12b0 mm/page_alloc.c:2584
     __put_single_page mm/swap.c:79 [inline]
     __put_page+0xfb/0x160 mm/swap.c:113
     put_page include/linux/mm.h:814 [inline]
     madvise_free_pte_range+0x137a/0x1ec0 mm/madvise.c:371
     walk_pmd_range mm/pagewalk.c:50 [inline]
     walk_pud_range mm/pagewalk.c:108 [inline]
     walk_p4d_range mm/pagewalk.c:134 [inline]
     walk_pgd_range mm/pagewalk.c:160 [inline]
     __walk_page_range+0xc3a/0x1450 mm/pagewalk.c:249
     walk_page_range+0x200/0x470 mm/pagewalk.c:326
     madvise_free_page_range.isra.9+0x17d/0x230 mm/madvise.c:444
     madvise_free_single_vma+0x353/0x580 mm/madvise.c:471
     madvise_dontneed_free mm/madvise.c:555 [inline]
     madvise_vma mm/madvise.c:664 [inline]
     SYSC_madvise mm/madvise.c:832 [inline]
     SyS_madvise+0x7d3/0x13c0 mm/madvise.c:760
     entry_SYSCALL_64_fastpath+0x1f/0xbe

Here is a C reproducer:

    #define _GNU_SOURCE
    #include <pthread.h>
    #include <sys/mman.h>
    #include <unistd.h>

    #define MADV_FREE	8
    #define PAGE_SIZE	4096

    static void *mapping;
    static const size_t mapping_size = 0x1000000;

    static void *madvise_thrproc(void *arg)
    {
        madvise(mapping, mapping_size, (long)arg);
    }

    int main(void)
    {
        pthread_t t[2];

        for (;;) {
            mapping = mmap(NULL, mapping_size, PROT_WRITE,
                           MAP_POPULATE|MAP_ANONYMOUS|MAP_PRIVATE, -1, 0);

            munmap(mapping + mapping_size / 2, PAGE_SIZE);

            pthread_create(&t[0], 0, madvise_thrproc, (void*)MADV_DONTNEED);
            pthread_create(&t[1], 0, madvise_thrproc, (void*)MADV_FREE);
            pthread_join(t[0], NULL);
            pthread_join(t[1], NULL);
            munmap(mapping, mapping_size);
        }
    }

Note: to see the splat, CONFIG_TRANSPARENT_HUGEPAGE=y and
CONFIG_DEBUG_VM=y are needed.

Google Bug Id: 64696096

Link: http://lkml.kernel.org/r/20170823205235.132061-1-ebiggers3@gmail.com
Fixes: 854e9ed0 ("mm: support madvise(MADV_FREE)")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: <stable@vger.kernel.org>	[v4.5+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

In DAX there are two separate places where the 2MiB range of a PMD is
defined.

The first is in the page tables, where a PMD mapping inserted for a
given address spans from (vmf->address & PMD_MASK) to ((vmf->address &
PMD_MASK) + PMD_SIZE - 1).  That is, from the 2MiB boundary below the
address to the 2MiB boundary above the address.

So, for example, a fault at address 3MiB (0x30 0000) falls within the
PMD that ranges from 2MiB (0x20 0000) to 4MiB (0x40 0000).

The second PMD range is in the mapping->page_tree, where a given file
offset is covered by a radix tree entry that spans from one 2MiB aligned
file offset to another 2MiB aligned file offset.

So, for example, the file offset for 3MiB (pgoff 768) falls within the
PMD range for the order 9 radix tree entry that ranges from 2MiB (pgoff
512) to 4MiB (pgoff 1024).

This system works so long as the addresses and file offsets for a given
mapping both have the same offsets relative to the start of each PMD.

Consider the case where the starting address for a given file isn't 2MiB
aligned - say our faulting address is 3 MiB (0x30 0000), but that
corresponds to the beginning of our file (pgoff 0).  Now all the PMDs in
the mapping are misaligned so that the 2MiB range defined in the page
tables never matches up with the 2MiB range defined in the radix tree.

The current code notices this case for DAX faults to storage with the
following test in dax_pmd_insert_mapping():

	if (pfn_t_to_pfn(pfn) & PG_PMD_COLOUR)
		goto unlock_fallback;

This test makes sure that the pfn we get from the driver is 2MiB
aligned, and relies on the assumption that the 2MiB alignment of the pfn
we get back from the driver matches the 2MiB alignment of the faulting
address.

However, faults to holes were not checked and we could hit the problem
described above.

This was reported in response to the NVML nvml/src/test/pmempool_sync
TEST5:

	$ cd nvml/src/test/pmempool_sync
	$ make TEST5

You can grab NVML here:

	https://github.com/pmem/nvml/

The dmesg warning you see when you hit this error is:

  WARNING: CPU: 13 PID: 2900 at fs/dax.c:641 dax_insert_mapping_entry+0x2df/0x310

Where we notice in dax_insert_mapping_entry() that the radix tree entry
we are about to replace doesn't match the locked entry that we had
previously inserted into the tree.  This happens because the initial
insertion was done in grab_mapping_entry() using a pgoff calculated from
the faulting address (vmf->address), and the replacement in
dax_pmd_load_hole() => dax_insert_mapping_entry() is done using
vmf->pgoff.

In our failure case those two page offsets (one calculated from
vmf->address, one using vmf->pgoff) point to different order 9 radix
tree entries.

This failure case can result in a deadlock because the radix tree unlock
also happens on the pgoff calculated from vmf->address.  This means that
the locked radix tree entry that we swapped in to the tree in
dax_insert_mapping_entry() using vmf->pgoff is never unlocked, so all
future faults to that 2MiB range will block forever.

Fix this by validating that the faulting address's PMD offset matches
the PMD offset from the start of the file.  This check is done at the
very beginning of the fault and covers faults that would have mapped to
storage as well as faults to holes.  I left the COLOUR check in
dax_pmd_insert_mapping() in place in case we ever hit the insanity
condition where the alignment of the pfn we get from the driver doesn't
match the alignment of the userspace address.

Link: http://lkml.kernel.org/r/20170822222436.18926-1-ross.zwisler@linux.intel.comSigned-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reported-by: "Slusarz, Marcin" <marcin.slusarz@intel.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

/sys/kernel/mm/transparent_hugepage/shmem_enabled controls if we want
to allocate huge pages when allocate pages for private in-kernel shmem
mount.

Unfortunately, as Dan noticed, I've screwed it up and the only way to
make kernel allocate huge page for the mount is to use "force" there.
All other values will be effectively ignored.

Link: http://lkml.kernel.org/r/20170822144254.66431-1-kirill.shutemov@linux.intel.com
Fixes: 5a6e75f8 ("shmem: prepare huge= mount option and sysfs knob")
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: stable <stable@vger.kernel.org> [4.8+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

There is a problem that when counting the pages for creating the
hibernation snapshot will take significant amount of time, especially on
system with large memory.  Since the counting job is performed with irq
disabled, this might lead to NMI lockup.  The following warning were
found on a system with 1.5TB DRAM:

  Freezing user space processes ... (elapsed 0.002 seconds) done.
  OOM killer disabled.
  PM: Preallocating image memory...
  NMI watchdog: Watchdog detected hard LOCKUP on cpu 27
  CPU: 27 PID: 3128 Comm: systemd-sleep Not tainted 4.13.0-0.rc2.git0.1.fc27.x86_64 #1
  task: ffff9f01971ac000 task.stack: ffffb1a3f325c000
  RIP: 0010:memory_bm_find_bit+0xf4/0x100
  Call Trace:
   swsusp_set_page_free+0x2b/0x30
   mark_free_pages+0x147/0x1c0
   count_data_pages+0x41/0xa0
   hibernate_preallocate_memory+0x80/0x450
   hibernation_snapshot+0x58/0x410
   hibernate+0x17c/0x310
   state_store+0xdf/0xf0
   kobj_attr_store+0xf/0x20
   sysfs_kf_write+0x37/0x40
   kernfs_fop_write+0x11c/0x1a0
   __vfs_write+0x37/0x170
   vfs_write+0xb1/0x1a0
   SyS_write+0x55/0xc0
   entry_SYSCALL_64_fastpath+0x1a/0xa5
  ...
  done (allocated 6590003 pages)
  PM: Allocated 26360012 kbytes in 19.89 seconds (1325.28 MB/s)

It has taken nearly 20 seconds(2.10GHz CPU) thus the NMI lockup was
triggered.  In case the timeout of the NMI watch dog has been set to 1
second, a safe interval should be 6590003/20 = 320k pages in theory.
However there might also be some platforms running at a lower frequency,
so feed the watchdog every 100k pages.

[yu.c.chen@intel.com: simplification]
  Link: http://lkml.kernel.org/r/1503460079-29721-1-git-send-email-yu.c.chen@intel.com
[yu.c.chen@intel.com: use interval of 128k instead of 100k to avoid modulus]
Link: http://lkml.kernel.org/r/1503328098-5120-1-git-send-email-yu.c.chen@intel.comSigned-off-by: Chen Yu <yu.c.chen@intel.com>
Reported-by: Jan Filipcewicz <jan.filipcewicz@intel.com>
Suggested-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Michal Hocko <mhocko@suse.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Len Brown <lenb@kernel.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit 0b0f9dc5 ("Revert "virtio_pci: use shared interrupts for
virtqueues"") removed the adjustment of the pre_vectors for the virtio
MSI-X vector allocation which was added in commit fb5e31d9 ("virtio:
allow drivers to request IRQ affinity when creating VQs"). This will
lead to an incorrect assignment of MSI-X vectors, and potential
deadlocks when offlining cpus.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Fixes: 0b0f9dc5 ("Revert "virtio_pci: use shared interrupts for virtqueues")
Reported-by: YASUAKI ISHIMATSU <yasu.isimatu@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

The message printed on disk resize is incorrect.  The following is
printed when resizing to 2 GiB:

  $ truncate -s 1G test.img
  $ qemu -device virtio-blk-pci,logical_block_size=4096,...
  (qemu) block_resize drive1 2G

  virtio_blk virtio0: new size: 4194304 4096-byte logical blocks (17.2 GB/16.0 GiB)

The virtio_blk capacity config field is in 512-byte sector units
regardless of logical_block_size as per the VIRTIO specification.
Therefore the message should read:

  virtio_blk virtio0: new size: 524288 4096-byte logical blocks (2.15 GB/2.0 GiB)

Note that this only affects the printed message.  Thankfully the actual
block device has the correct size because the block layer expects
capacity in sectors.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

The symbolic constants QUEUE_FLAG_SCSI_PASSTHROUGH, QUEUE_FLAG_QUIESCED
and REQ_NOWAIT are missing from blk-mq-debugfs.c. Add these to
blk-mq-debugfs.c such that these appear as names in debugfs instead of
as numbers.
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Nixiaoming pointed out that there is a memory leak in
kvm_vm_ioctl_create_spapr_tce() if the call to anon_inode_getfd()
fails; the memory allocated for the kvmppc_spapr_tce_table struct
is not freed, and nor are the pages allocated for the iommu
tables.  In addition, we have already incremented the process's
count of locked memory pages, and this doesn't get restored on
error.

David Hildenbrand pointed out that there is a race in that the
function checks early on that there is not already an entry in the
stt->iommu_tables list with the same LIOBN, but an entry with the
same LIOBN could get added between then and when the new entry is
added to the list.

This fixes all three problems.  To simplify things, we now call
anon_inode_getfd() before placing the new entry in the list.  The
check for an existing entry is done while holding the kvm->lock
mutex, immediately before adding the new entry to the list.
Finally, on failure we now call kvmppc_account_memlimit to
decrement the process's count of locked memory pages.
Reported-by: Nixiaoming <nixiaoming@huawei.com>
Reported-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Regardless of which events form a group, it does not make sense for the
events to target different tasks and/or CPUs, as this leaves the group
inconsistent and impossible to schedule. The core perf code assumes that
these are consistent across (successfully intialised) groups.

Core perf code only verifies this when moving SW events into a HW
context. Thus, we can violate this requirement for pure SW groups and
pure HW groups, unless the relevant PMU driver happens to perform this
verification itself. These mismatched groups subsequently wreak havoc
elsewhere.

For example, we handle watchpoints as SW events, and reserve watchpoint
HW on a per-CPU basis at pmu::event_init() time to ensure that any event
that is initialised is guaranteed to have a slot at pmu::add() time.
However, the core code only checks the group leader's cpu filter (via
event_filter_match()), and can thus install follower events onto CPUs
violating thier (mismatched) CPU filters, potentially installing them
into a CPU without sufficient reserved slots.

This can be triggered with the below test case, resulting in warnings
from arch backends.

  #define _GNU_SOURCE
  #include <linux/hw_breakpoint.h>
  #include <linux/perf_event.h>
  #include <sched.h>
  #include <stdio.h>
  #include <sys/prctl.h>
  #include <sys/syscall.h>
  #include <unistd.h>

  static int perf_event_open(struct perf_event_attr *attr, pid_t pid, int cpu,
			   int group_fd, unsigned long flags)
  {
	return syscall(__NR_perf_event_open, attr, pid, cpu, group_fd, flags);
  }

  char watched_char;

  struct perf_event_attr wp_attr = {
	.type = PERF_TYPE_BREAKPOINT,
	.bp_type = HW_BREAKPOINT_RW,
	.bp_addr = (unsigned long)&watched_char,
	.bp_len = 1,
	.size = sizeof(wp_attr),
  };

  int main(int argc, char *argv[])
  {
	int leader, ret;
	cpu_set_t cpus;

	/*
	 * Force use of CPU0 to ensure our CPU0-bound events get scheduled.
	 */
	CPU_ZERO(&cpus);
	CPU_SET(0, &cpus);
	ret = sched_setaffinity(0, sizeof(cpus), &cpus);
	if (ret) {
		printf("Unable to set cpu affinity\n");
		return 1;
	}

	/* open leader event, bound to this task, CPU0 only */
	leader = perf_event_open(&wp_attr, 0, 0, -1, 0);
	if (leader < 0) {
		printf("Couldn't open leader: %d\n", leader);
		return 1;
	}

	/*
	 * Open a follower event that is bound to the same task, but a
	 * different CPU. This means that the group should never be possible to
	 * schedule.
	 */
	ret = perf_event_open(&wp_attr, 0, 1, leader, 0);
	if (ret < 0) {
		printf("Couldn't open mismatched follower: %d\n", ret);
		return 1;
	} else {
		printf("Opened leader/follower with mismastched CPUs\n");
	}

	/*
	 * Open as many independent events as we can, all bound to the same
	 * task, CPU0 only.
	 */
	do {
		ret = perf_event_open(&wp_attr, 0, 0, -1, 0);
	} while (ret >= 0);

	/*
	 * Force enable/disble all events to trigger the erronoeous
	 * installation of the follower event.
	 */
	printf("Opened all events. Toggling..\n");
	for (;;) {
		prctl(PR_TASK_PERF_EVENTS_DISABLE, 0, 0, 0, 0);
		prctl(PR_TASK_PERF_EVENTS_ENABLE, 0, 0, 0, 0);
	}

	return 0;
  }

Fix this by validating this requirement regardless of whether we're
moving events.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Zhou Chengming <zhouchengming1@huawei.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1498142498-15758-1-git-send-email-mark.rutland@arm.comSigned-off-by: Ingo Molnar <mingo@kernel.org>

The following commit:

  39a0526f ("x86/mm: Factor out LDT init from context init")

renamed init_new_context() to init_new_context_ldt() and added a new
init_new_context() which calls init_new_context_ldt().  However, the
error code of init_new_context_ldt() was ignored.  Consequently, if a
memory allocation in alloc_ldt_struct() failed during a fork(), the
->context.ldt of the new task remained the same as that of the old task
(due to the memcpy() in dup_mm()).  ldt_struct's are not intended to be
shared, so a use-after-free occurred after one task exited.

Fix the bug by making init_new_context() pass through the error code of
init_new_context_ldt().

This bug was found by syzkaller, which encountered the following splat:

    BUG: KASAN: use-after-free in free_ldt_struct.part.2+0x10a/0x150 arch/x86/kernel/ldt.c:116
    Read of size 4 at addr ffff88006d2cb7c8 by task kworker/u9:0/3710

    CPU: 1 PID: 3710 Comm: kworker/u9:0 Not tainted 4.13.0-rc4-next-20170811 #2
    Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
    Call Trace:
     __dump_stack lib/dump_stack.c:16 [inline]
     dump_stack+0x194/0x257 lib/dump_stack.c:52
     print_address_description+0x73/0x250 mm/kasan/report.c:252
     kasan_report_error mm/kasan/report.c:351 [inline]
     kasan_report+0x24e/0x340 mm/kasan/report.c:409
     __asan_report_load4_noabort+0x14/0x20 mm/kasan/report.c:429
     free_ldt_struct.part.2+0x10a/0x150 arch/x86/kernel/ldt.c:116
     free_ldt_struct arch/x86/kernel/ldt.c:173 [inline]
     destroy_context_ldt+0x60/0x80 arch/x86/kernel/ldt.c:171
     destroy_context arch/x86/include/asm/mmu_context.h:157 [inline]
     __mmdrop+0xe9/0x530 kernel/fork.c:889
     mmdrop include/linux/sched/mm.h:42 [inline]
     exec_mmap fs/exec.c:1061 [inline]
     flush_old_exec+0x173c/0x1ff0 fs/exec.c:1291
     load_elf_binary+0x81f/0x4ba0 fs/binfmt_elf.c:855
     search_binary_handler+0x142/0x6b0 fs/exec.c:1652
     exec_binprm fs/exec.c:1694 [inline]
     do_execveat_common.isra.33+0x1746/0x22e0 fs/exec.c:1816
     do_execve+0x31/0x40 fs/exec.c:1860
     call_usermodehelper_exec_async+0x457/0x8f0 kernel/umh.c:100
     ret_from_fork+0x2a/0x40 arch/x86/entry/entry_64.S:431

    Allocated by task 3700:
     save_stack_trace+0x16/0x20 arch/x86/kernel/stacktrace.c:59
     save_stack+0x43/0xd0 mm/kasan/kasan.c:447
     set_track mm/kasan/kasan.c:459 [inline]
     kasan_kmalloc+0xad/0xe0 mm/kasan/kasan.c:551
     kmem_cache_alloc_trace+0x136/0x750 mm/slab.c:3627
     kmalloc include/linux/slab.h:493 [inline]
     alloc_ldt_struct+0x52/0x140 arch/x86/kernel/ldt.c:67
     write_ldt+0x7b7/0xab0 arch/x86/kernel/ldt.c:277
     sys_modify_ldt+0x1ef/0x240 arch/x86/kernel/ldt.c:307
     entry_SYSCALL_64_fastpath+0x1f/0xbe

    Freed by task 3700:
     save_stack_trace+0x16/0x20 arch/x86/kernel/stacktrace.c:59
     save_stack+0x43/0xd0 mm/kasan/kasan.c:447
     set_track mm/kasan/kasan.c:459 [inline]
     kasan_slab_free+0x71/0xc0 mm/kasan/kasan.c:524
     __cache_free mm/slab.c:3503 [inline]
     kfree+0xca/0x250 mm/slab.c:3820
     free_ldt_struct.part.2+0xdd/0x150 arch/x86/kernel/ldt.c:121
     free_ldt_struct arch/x86/kernel/ldt.c:173 [inline]
     destroy_context_ldt+0x60/0x80 arch/x86/kernel/ldt.c:171
     destroy_context arch/x86/include/asm/mmu_context.h:157 [inline]
     __mmdrop+0xe9/0x530 kernel/fork.c:889
     mmdrop include/linux/sched/mm.h:42 [inline]
     __mmput kernel/fork.c:916 [inline]
     mmput+0x541/0x6e0 kernel/fork.c:927
     copy_process.part.36+0x22e1/0x4af0 kernel/fork.c:1931
     copy_process kernel/fork.c:1546 [inline]
     _do_fork+0x1ef/0xfb0 kernel/fork.c:2025
     SYSC_clone kernel/fork.c:2135 [inline]
     SyS_clone+0x37/0x50 kernel/fork.c:2129
     do_syscall_64+0x26c/0x8c0 arch/x86/entry/common.c:287
     return_from_SYSCALL_64+0x0/0x7a

Here is a C reproducer:

    #include <asm/ldt.h>
    #include <pthread.h>
    #include <signal.h>
    #include <stdlib.h>
    #include <sys/syscall.h>
    #include <sys/wait.h>
    #include <unistd.h>

    static void *fork_thread(void *_arg)
    {
        fork();
    }

    int main(void)
    {
        struct user_desc desc = { .entry_number = 8191 };

        syscall(__NR_modify_ldt, 1, &desc, sizeof(desc));

        for (;;) {
            if (fork() == 0) {
                pthread_t t;

                srand(getpid());
                pthread_create(&t, NULL, fork_thread, NULL);
                usleep(rand() % 10000);
                syscall(__NR_exit_group, 0);
            }
            wait(NULL);
        }
    }

Note: the reproducer takes advantage of the fact that alloc_ldt_struct()
may use vmalloc() to allocate a large ->entries array, and after
commit:

  5d17a73a ("vmalloc: back off when the current task is killed")

it is possible for userspace to fail a task's vmalloc() by
sending a fatal signal, e.g. via exit_group().  It would be more
difficult to reproduce this bug on kernels without that commit.

This bug only affected kernels with CONFIG_MODIFY_LDT_SYSCALL=y.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: <stable@vger.kernel.org> [v4.6+]
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mm@kvack.org
Fixes: 39a0526f ("x86/mm: Factor out LDT init from context init")
Link: http://lkml.kernel.org/r/20170824175029.76040-1-ebiggers3@gmail.comSigned-off-by: Ingo Molnar <mingo@kernel.org>

The host pkru is restored right after vcpu exit (commit 1be0e61c), so
KVM_GET_XSAVE will return the host PKRU value instead.  Fix this by
using the guest PKRU explicitly in fill_xsave and load_xsave.  This
part is based on a patch by Junkang Fu.

The host PKRU data may also not match the value in vcpu->arch.guest_fpu.state,
because it could have been changed by userspace since the last time
it was saved, so skip loading it in kvm_load_guest_fpu.
Reported-by: Junkang Fu <junkang.fjk@alibaba-inc.com>
Cc: Yang Zhang <zy107165@alibaba-inc.com>
Fixes: 1be0e61c
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Move it to struct kvm_arch_vcpu, replacing guest_pkru_valid with a
simple comparison against the host value of the register.  The write of
PKRU in addition can be skipped if the guest has not enabled the feature.
Once we do this, we need not test OSPKE in the host anymore, because
guest_CR4.PKE=1 implies host_CR4.PKE=1.

The static PKU test is kept to elide the code on older CPUs.
Suggested-by: Yang Zhang <zy107165@alibaba-inc.com>
Fixes: 1be0e61c
Cc: stable@vger.kernel.org
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

If the host has protection keys disabled, we cannot read and write the
guest PKRU---RDPKRU and WRPKRU fail with #GP(0) if CR4.PKE=0.  Block
the PKU cpuid bit in that case.

This ensures that guest_CR4.PKE=1 implies host_CR4.PKE=1.

Fixes: 1be0e61c
Cc: stable@vger.kernel.org
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Version 4 of the ONFI spec mandates that tADL be at least 400 nanoseconds,
but, depending on the master clock rate, 400 ns may not fit in the tADL
field of the SMC reg. We need to relax the check and accept the -ERANGE
return code.

Note that previous versions of the ONFI spec had a lower tADL_min (100 or
200 ns). It's not clear why this timing constraint got increased but it
seems most NANDs are fine with values lower than 400ns, so we should be
safe.

Fixes: f9ce2edd ("mtd: nand: atmel: Add ->setup_data_interface() hooks")
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Tested-by: Quentin Schulz <quentin.schulz@free-electrons.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>

The debugfs entries must be removed before an error is returned in the
probe function. Otherwise another try to load the module fails and when
the debugfs files are accessed without the module loaded, the kernel
still tries to call a function in that module.

Fixes: 5346c27c ("mtd: nandsim: Introduce debugfs infrastructure")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Richard Weinberger <richard@nod.at>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>