Due to type confusion, when an nfsacl verison 2 'ACCESS' request
finishes and tries to clean up, it calls fh_put on entiredly the
wrong thing and this can cause an oops.
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

On the Core2 cpus, the rdtsc instruction is not serializing (as defined
in the architecture reference since rdtsc exists) and due to the deep
speculation of these cores, it's possible that you can observe time go
backwards between cores due to this speculation. Since the kernel
already deals with this with the SYNC_RDTSC flag, the solution is
simple, only assume that the instruction is serializing on family 15...

The price one pays for this is a slightly slower gettimeofday (by a
dozen or two cycles), but that increase is quite small to pay for a
really-going-forward tsc counter.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Andi Kleen <ak@suse.de>
[chrisw: backported to 2.6.18]
Signed-off-by: Chris Wright <chrisw@sous-sol.org>

With malformed packets it might be possible to overwrite internal
CMTP and CAPI data structures. This patch adds additional length
checks to prevent these kinds of remote attacks.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Chris Wright <chrisw@sous-sol.org>

At least some nforce cards continue to send legacy interrupts when MSI
is enabled, and these interrupts are treated as unhandled by the
kernel. This patch disables legacy interrupts explicitly when enabling
MSI mode.

The correct fix is to change the MSI infrastructure to disable legacy
interrupts when enabling MSI, but this is potentially risky if the
device isn't PCI-2.3 or is quirky, so the correct fix is going into
mainline, while patches like this one go into -stable.

Legend has it that it is most correct to disable legacy interrupts
before enabling MSI, but the mainline patch does it in the other
order, and this patch is "obviously" the same as mainline.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Chris Wright <chrisw@sous-sol.org>

The m32r kernel 2.6.18-rc1 or after cause build errors of "unknown isa
configuration" for userspace application programs, such as glibc, gdb, etc.

This is because the recent kernel do not include linux/config.h not to expose
kernel headers for userspace.

To fix the above compile errors, this patch fixes two headers ptrace.h and
sigcontext.h for m32r and makes them platform-independent.
Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Chris Wright <chrisw@sous-sol.org>

It is possible to have tasklets get scheduled before softirqd has had a chance
to spawn on all CPUs.  This is totally harmless; after success during action
CPU_UP_PREPARE, action CPU_ONLINE will be called, which immediately wakes
softirqd on the appropriate CPU to process the already pending tasklets.  So
there is no danger of having a missed wakeup for any tasklets that were
already pending.

In particular, i386 is affected by this during startup, and is visible when
using a very large initrd; during the time it takes for the initrd to be
decompressed, a timer IRQ can come in and schedule RCU callbacks.  It is also
possible that resending of a hardware IRQ via a softirq triggers the same bug.

Because of different timing conditions, this shows up in all emulators and
virtual machines tested, including Xen, VMware, Virtual PC, and Qemu.  It is
also possible to trigger on native hardware with a large enough initrd,
although I don't have a reliable case demonstrating that.
Signed-off-by: Zachary Amsden <zach@vmware.com>
Cc: <caglar@pardus.org.tr>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Chris Wright <chrisw@sous-sol.org>

OpenVZ Linux kernel team has found a problem with mounting in compat mode.

Simple command "mount -t smbfs ..." on Fedora Core 5 distro in 32-bit mode
leads to oops:

Unable to handle kernel NULL pointer dereference at 0000000000000000 RIP:
[<ffffffff802bc7c6>] compat_sys_mount+0xd6/0x290
PGD 34d48067 PUD 34d03067 PMD 0
Oops: 0000 [1] SMP
CPU: 0
Modules linked in: iptable_nat simfs smbfs ip_nat ip_conntrack vzdquota
parport_pc lp parport 8021q bridge llc vznetdev vzmon nfs lockd sunrpc vzdev
iptable_filter af_packet xt_length ipt_ttl xt_tcpmss ipt_TCPMSS
iptable_mangle xt_limit ipt_tos ipt_REJECT ip_tables x_tables thermal
processor fan button battery asus_acpi ac uhci_hcd ehci_hcd usbcore i2c_i801
i2c_core e100 mii floppy ide_cd cdrom
Pid: 14656, comm: mount
RIP: 0060:[<ffffffff802bc7c6>]  [<ffffffff802bc7c6>]
compat_sys_mount+0xd6/0x290
RSP: 0000:ffff810034d31f38  EFLAGS: 00010292
RAX: 000000000000002c RBX: 0000000000000000 RCX: 0000000000000000
RDX: ffff810034c86bc0 RSI: 0000000000000096 RDI: ffffffff8061fc90
RBP: ffff810034d31f78 R08: 0000000000000000 R09: 000000000000000d
R10: ffff810034d31e58 R11: 0000000000000001 R12: ffff810039dc3000
R13: 000000000805ea48 R14: 0000000000000000 R15: 00000000c0ed0000
FS:  0000000000000000(0000) GS:ffffffff80749000(0033) knlGS:00000000b7d556b0
CS:  0060 DS: 007b ES: 007b CR0: 000000008005003b
CR2: 0000000000000000 CR3: 0000000034d43000 CR4: 00000000000006e0
Process mount (pid: 14656, veid=300, threadinfo ffff810034d30000, task
ffff810034c86bc0)
Stack:  0000000000000000 ffff810034dd0000 ffff810034e4a000 000000000805ea48
 0000000000000000 0000000000000000 0000000000000000 0000000000000000
 000000000805ea48 ffffffff8021e64e 0000000000000000 0000000000000000
Call Trace:
 [<ffffffff8021e64e>] ia32_sysret+0x0/0xa

Code: 83 3b 06 0f 85 41 01 00 00 0f b7 43 0c 89 43 14 0f b7 43 0a
RIP  [<ffffffff802bc7c6>] compat_sys_mount+0xd6/0x290
 RSP <ffff810034d31f38>
CR2: 0000000000000000

The problem is that data_page pointer can be NULL, so we should skip data
conversion in this case.
Signed-off-by: Andrey Mirkin <amirkin@openvz.org>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Chris Wright <chrisw@sous-sol.org>

Later glibc requires the *at syscalls.  Add them.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Chris Wright <chrisw@sous-sol.org>

Fixes http://bugzilla.kernel.org/show_bug.cgi?id=7431
iBook G3 threw a machine check exception and put the display backlight
to full brightness after ohci1394 was unloaded and reloaded.
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
[dsd@gentoo.org: also added missing if condition, commit
 63cca59e]
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Chris Wright <chrisw@sous-sol.org>

The TUNER_LG_NTSC_TAPE is identical in all respects to the
TUNER_PHILIPS_FM1236_MK3. So use the params struct for the Philips tuner.
Also add this LG_NTSC_TAPE tuner to the switches where radio specific
parameters are set so it behaves like a TUNER_PHILIPS_FM1236_MK3. This
change fixes the radio support for this tuner (the wrong bandswitch byte
was used).

Thanks to Andy Walls <cwalls@radix.net> for finding this bug.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Chris Wright <chrisw@sous-sol.org>

In some cases when using VSB, the AGC status register has been known to
falsely report "no signal" when in fact there is a carrier lock.  The
datasheet labels these status flags as QAM only, yet the lgdt330x
module is using these flags for both QAM and VSB.

This patch allows for the carrier recovery lock status register to be
tested, even if the agc signal status register falsely reports no signal.

Thanks to jcrews from #linuxtv in irc, for initially reporting this bug.
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Chris Wright <chrisw@sous-sol.org>

This is a small fix-up to finish out the work done by Jay Vosburgh to
add carrier-state support for bonding devices.  The output in
/proc/net/bonding/bondX was correct, but when collecting the same info
via an iotcl it could still be incorrect.
Signed-off-by: Andy Gospodarek <andy@greyhouse.net>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Chris Wright <chrisw@sous-sol.org>

We must reserve SAR + MAX_HEADER bytes for IrLMP to fit in.
This fixes an oops reported (and fixed) by Jeet Chaudhuri, when max_sdu_size
is greater than 0.
Signed-off-by: Samuel Ortiz <samuel@sortiz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Chris Wright <chrisw@sous-sol.org>

We grab a reference to the route's inetpeer entry but
forget to release it in xfrm4_dst_destroy().

Bug discovered by Kazunori MIYAZAWA <kazunori@miyazawa.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Chris Wright <chrisw@sous-sol.org>

Fix oops when removing full snapshot
kernel bugzilla bug 7040

If a snapshot became invalid (full) while there is outstanding
pending_exception, pending_complete() forgets to remove
the corresponding exception from its exception table before freeing it.

Already fixed in 2.6.19.
Signed-off-by: Milan Broz <mbroz@redhat.com>
Signed-off-by: Chris Wright <chrisw@sous-sol.org>

Currently the behaviour of disable_xfrm is inconsistent between
locally generated and forwarded packets. For locally generated
packets disable_xfrm disables the policy lookup if it is set on
the output device, for forwarded traffic however it looks at the
input device. This makes it impossible to disable xfrm on all
devices but a dummy device and use normal routing to direct
traffic to that device.

Always use the output device when checking disable_xfrm.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Chris Wright <chrisw@sous-sol.org>

The following patch fixes the failure of sunhme drivers on x86 hosts
due to missing pci_enable_device() and pci_set_master() calls, lost
during code refactoring. It has been filed as bugzilla bug #7502 [0]
and Debian bug #397460 [1].

[0] http://bugzilla.kernel.org/show_bug.cgi?id=7502
[1] http://bugs.debian.org/397460Signed-off-by: Jurij Smakov <jurij@wooyd.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Chris Wright <chrisw@sous-sol.org>

Not returning -EINVAL, because someone might want to use the value
zero in some future gact_prob algorithm?
Signed-off-by: Kim Nordlund <kim.nordlund@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Chris Wright <chrisw@sous-sol.org>

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Chris Wright <chrisw@sous-sol.org>

Fix corruption issue with dm-crypt on top of software raid5. Cancelled
readahead bio's that report no error, just have BIO_UPTODATE cleared
were reported as successful reads to the higher layers (and leaving
random content in the buffer cache). Already fixed in 2.6.19.
Signed-off-by: Christophe Saout <christophe@saout.de>
Signed-off-by: Chris Wright <chrisw@sous-sol.org>

The tc actions increased the size of struct tc_police, which broke
compatibility with old iproute binaries since both the act_police
and the old NET_CLS_POLICE code check for an exact size match.

Since the new members are not even used, the simple fix is to also
accept the size of the old structure. Dumping is not affected since
old userspace will receive a bigger structure, which is handled fine.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Acked-by: Jamal Hadi Salim <hadi@cyberus.ca>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Chris Wright <chrisw@sous-sol.org>

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Chris Wright <chrisw@sous-sol.org>

No need to revisit a chain we'd already finished with during
the check for current hook.  It's either instant loop (which
we'd just detected) or a duplicate work.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Chris Wright <chrisw@sous-sol.org>

We need that for iterator to work; existing check had been too weak.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Chris Wright <chrisw@sous-sol.org>

We need to verify that
	a) we are not too close to the end of buffer to dereference
	b) next entry we'll be checking won't be _before_ our

While we are at it, don't subtract unrelated pointers...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Chris Wright <chrisw@sous-sol.org>

In the scan section of ieee80211softmac, network transmits are disabled.
When SoftMAC re-enables transmits, it may override the wishes of a driver
that may have very good reasons for disabling transmits. At least one failure
in bcm43xx can be traced to this problem. In addition, several unexplained
problems may arise from the unexpected enabling of transmits.
Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Chris Wright <chrisw@sous-sol.org>

IPsec with NAT-T breaks on some notebooks using the latest e1000 chipset,
when header split is enabled. When receiving sufficiently large packets, the
driver puts everything up to and including the UDP header into the header
portion of the skb, and the rest goes into the paged part. udp_encap_rcv
forgets to use pskb_may_pull, and fails to decapsulate it. Instead, it
passes it up it to the IKE daemon.
Signed-off-by: Olaf Kirch <okir@suse.de>
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Chris Wright <chrisw@sous-sol.org>

Fix bug in certain error paths of lookup routines.  The request object was
reused for sending FORGET, which is illegal.  This bug could cause an Oops
in 2.6.18.  In earlier versions it might silently corrupt memory, but this
is very unlikely.

These error paths are never triggered by libfuse, so this wasn't noticed
even with the 2.6.18 kernel, only with a filesystem using the raw kernel
interface.

Thanks to Russ Cox for the bug report and test filesystem.
Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
[chrisw: backport to 2.6.18 -stable]
Signed-off-by: Chris Wright <chrisw@sous-sol.org>

Not all graphic page remappers support physical addresses over the 4GB
mark for remapping, so while some do (the AMD64 GART always did, and I
just fixed the i965 to do so properly), we're safest off just forcing
GFP_DMA32 allocations to make sure graphics pages get allocated in the
low 32-bit address space by default.

AGP sub-drivers that really care, and can do better, could just choose
to implement their own allocator (or we could add another "64-bit safe"
default allocator for their use), but quite frankly, you're not likely
to care in practice.

So for now, this trivial change means that we won't be allocating pages
that we can't map correctly by mistake on x86-64.

[ On traditional 32-bit x86, this could never happen, because GFP_KERNEL
  would never allocate any highmem memory anyway ]
Acked-by: Andi Kleen <ak@suse.de>
Acked-by: Dave Jones <davej@redhat.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: Keith Packard <keithp@keithp.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Chris Wright <chrisw@sous-sol.org>

The "u16 *" derefs of skb->data need to be wrapped inside of
a get_unaligned().

Thanks to Gustavo Zacarias for the bug report.
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Chris Wright <chrisw@sous-sol.org>

When called to do a transfer that has a start offset within the cache
line which is uneven between source and destination and a length which
terminates the source of the copy exactly on a cache line, one extra
line gets copied into a temporary buffer.  This is normally not an issue
since the buffer is a kernel buffer and only the requested information
gets copied into the user buffer.

The problem arises when the source ends at the very last physical page
of memory.  That last cache line does not exist and results in the SHUB
chip raising an MCA.
Signed-off-by: Robin Holt <holt@sgi.com>
Signed-off-by: Dean Nelson <dcn@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Chris Wright <chrisw@sous-sol.org>

[PATCH] IPV6: Fix address/interface handling in UDP and DCCP, according to the scoping architecture.

TCP and RAW do not have this issue.  Closes Bug #7432.
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Chris Wright <chrisw@sous-sol.org>

Sparse noticed a locking imbalance in tg3_open(). This patch adds an
unlock to one of the error paths, so that tg3_open() always exits
without the lock held.
Signed-off-by: Ira W. Snyder <kernel@irasnyder.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Chris Wright <chrisw@sous-sol.org>

Fix a slab corruption in ieee80211softmac_auth(). The size of a buffer
was miscomputed.

see http://bugzilla.kernel.org/show_bug.cgi?id=7245Acked-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: Laurent Riffard <laurent.riffard@free.fr>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Chris Wright <chrisw@sous-sol.org>

There appears to be a typo in the EV56 config option. NORITAKE and PRIMO are
be able to set a variation of either.
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Chris Wright <chrisw@sous-sol.org>

IA32 manual says if micorcode update's size is 0, then the size is
default size (2048 bytes). But this doesn't suggest all microcode
update's size should be above 2048 bytes to me. We actually had a
microcode update whose size is 1024 bytes. The patch just removed the
check.

Backported to 2.6.18 by Daniel Drake.
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: Chris Wright <chrisw@sous-sol.org>

V4L: Do not enable VIDEO_V4L2 unconditionally

The VIDEO_V4L2 config setting is enabled unconditionally, even for
configurations with no support for this subsystem whatsoever. The
following patch adds the necessary dependency.
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Chris Wright <chrisw@sous-sol.org>