- 09 Feb, 2017 30 commits
-
-
Greg Kroah-Hartman authored
-
Toshi Kani authored
commit a96dfddb upstream. Reading a sysfs "memoryN/valid_zones" file leads to the following oops when the first page of a range is not backed by struct page. show_valid_zones() assumes that 'start_pfn' is always valid for page_zone(). BUG: unable to handle kernel paging request at ffffea017a000000 IP: show_valid_zones+0x6f/0x160 This issue may happen on x86-64 systems with 64GiB or more memory since their memory block size is bumped up to 2GiB. [1] An example of such systems is desribed below. 0x3240000000 is only aligned by 1GiB and this memory block starts from 0x3200000000, which is not backed by struct page. BIOS-e820: [mem 0x0000003240000000-0x000000603fffffff] usable Since test_pages_in_a_zone() already checks holes, fix this issue by extending this function to return 'valid_start' and 'valid_end' for a given range. show_valid_zones() then proceeds with the valid range. [1] 'Commit bdee237c ("x86: mm: Use 2GB memory block size on large-memory x86-64 systems")' Link: http://lkml.kernel.org/r/20170127222149.30893-3-toshi.kani@hpe.comSigned-off-by:
Toshi Kani <toshi.kani@hpe.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Zhang Zhen <zhenzhang.zhang@huawei.com> Cc: Reza Arbab <arbab@linux.vnet.ibm.com> Cc: David Rientjes <rientjes@google.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: <stable@vger.kernel.org> [4.4+] Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Thomas Gleixner authored
commit aaaec6fc upstream. The recent commit which prevents double activation of interrupts unearthed interesting code in x86. The code (ab)uses irq_domain_activate_irq() to reconfigure an already activated interrupt. That trips over the prevention code now. Fix it by deactivating the interrupt before activating the new configuration. Fixes: 08d85f3e "irqdomain: Avoid activating interrupts more than once" Reported-and-tested-by:
Mike Galbraith <efault@gmx.de> Reported-and-tested-by:
Borislav Petkov <bp@alien8.de> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1701311901580.3457@nanosSigned-off-by:
-
Bjørn Mork authored
commit 5d03a2fd upstream. Yet another laptop vendor rebranded Novatel E371. Signed-off-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Vincent Pelletier authored
commit 83e526f2 upstream. OS descriptor head, when flagged as provided, is accessed without checking if it fits in provided buffer. Verify length before access. Also, there are other places where buffer length it checked after accessing offsets which are potentially past the end. Check buffer length before as well to fail cleanly. Signed-off-by:
Vincent Pelletier <plr.vincent@gmail.com> Acked-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
Lukáš Lalinský authored
commit d9b2997e upstream. Add a quirk for WORLDE easykey.25 MIDI keyboard (idVendor=0218, idProduct=0401). The device reports that it has config string descriptor at index 3, but when the system selects the configuration and tries to get the description, it returns a -EPROTO error, the communication restarts and this keeps repeating over and over again. Not requesting the string descriptor makes the device work correctly. Relevant info from Wireshark: [...] CONFIGURATION DESCRIPTOR bLength: 9 bDescriptorType: 0x02 (CONFIGURATION) wTotalLength: 101 bNumInterfaces: 2 bConfigurationValue: 1 iConfiguration: 3 Configuration bmAttributes: 0xc0 SELF-POWERED NO REMOTE-WAKEUP 1... .... = Must be 1: Must be 1 for USB 1.1 and higher .1.. .... = Self-Powered: This device is SELF-POWERED ..0. .... = Remote Wakeup: This device does NOT support remote wakeup bMaxPower: 50 (100mA) [...] 45 0.369104 host 2.38.0 USB 64 GET DESCRIPTOR Request STRING [...] URB setup bmRequestType: 0x80 1... .... = Direction: Device-to-host .00. .... = Type: Standard (0x00) ...0 0000 = Recipient: Device (0x00) bRequest: GET DESCRIPTOR (6) Descriptor Index: 0x03 bDescriptorType: 0x03 Language Id: English (United States) (0x0409) wLength: 255 46 0.369255 2.38.0 host USB 64 GET DESCRIPTOR Response STRING[Malformed Packet] [...] Frame 46: 64 bytes on wire (512 bits), 64 bytes captured (512 bits) on interface 0 USB URB [Source: 2.38.0] [Destination: host] URB id: 0xffff88021f62d480 URB type: URB_COMPLETE ('C') URB transfer type: URB_CONTROL (0x02) Endpoint: 0x80, Direction: IN Device: 38 URB bus id: 2 Device setup request: not relevant ('-') Data: present (0) URB sec: 1484896277 URB usec: 455031 URB status: Protocol error (-EPROTO) (-71) URB length [bytes]: 0 Data length [bytes]: 0 [Request in: 45] [Time from request: 0.000151000 seconds] Unused Setup Header Interval: 0 Start frame: 0 Copy of Transfer Flags: 0x00000200 Number of ISO descriptors: 0 [Malformed Packet: USB] [Expert Info (Error/Malformed): Malformed Packet (Exception occurred)] [Malformed Packet (Exception occurred)] [Severity level: Error] [Group: Malformed] Signed-off-by:
Lukáš Lalinský <lukas@oxygene.sk> Signed-off-by:
-
Marcel J.E. Mol authored
commit d07830db upstream. Seems that ATEN serial-to-usb devices using pl2303 exist with different device ids. This patch adds a missing device ID so it is recognised by the driver. Signed-off-by:
Marcel J.E. Mol <marcel@mesa.nl> Signed-off-by:
-
Aleksander Morgado authored
commit 24d615a6 upstream. The Dell DW5570 is a re-branded Sierra Wireless MC8805 which will by default boot with vid 0x413c and pid 0x81a3. When triggered QDL download mode, the device switches to pid 0x81a6 and provides the standard TTY used for firmware upgrade. Signed-off-by:
Aleksander Morgado <aleksander@aleksander.es> Signed-off-by:
-
Radim Krčmář authored
commit 00c87e9a upstream. Saving unsupported state prevents migration when the new host does not support a XSAVE feature of the original host, even if the feature is not exposed to the guest. We've masked host features with guest-visible features before, with 4344ee98 ("KVM: x86: only copy XSAVE state for the supported features") and dropped it when implementing XSAVES. Do it again. Fixes: df1daba7 ("KVM: x86: support XSAVES usage in the host") Reviewed-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
Radim Krčmář <rkrcmar@redhat.com> Signed-off-by:
-
Jason Gerecke authored
commit 282e4637 upstream. Commit 025bcc15 performed cleanup work on the 'wacom_pl_irq' function, making it follow the standards used in the rest of the codebase. The change unintiontionally allowed the function to send input events from reports that are not marked as being in prox. This can cause problems as the report values for X, Y, etc. are not guaranteed to be correct. In particular, occasionally the tablet will send a report with these values set to zero. If such a report is received it can caus an unexpected jump in the XY position. This patch surrounds more of the processing code with a proximity check, preventing these zeroed reports from overwriting the current state. To be safe, only the tool type and ABS_MISC events should be reported when the pen is marked as being out of prox. Fixes: 025bcc15 ("HID: wacom: Simplify 'wacom_pl_irq'") Signed-off-by:
Jason Gerecke <jason.gerecke@wacom.com> Reviewed-by:
Ping Cheng <pingc@wacom.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Douglas Miller authored
commit 966d2b04 upstream. percpu_ref_tryget() and percpu_ref_tryget_live() should return "true" IFF they acquire a reference. But the return value from atomic_long_inc_not_zero() is a long and may have high bits set, e.g. PERCPU_COUNT_BIAS, and the return value of the tryget routines is bool so the reference may actually be acquired but the routines return "false" which results in a reference leak since the caller assumes it does not need to do a corresponding percpu_ref_put(). This was seen when performing CPU hotplug during I/O, as hangs in blk_mq_freeze_queue_wait where percpu_ref_kill (blk_mq_freeze_queue_start) raced with percpu_ref_tryget (blk_mq_timeout_work). Sample stack trace: __switch_to+0x2c0/0x450 __schedule+0x2f8/0x970 schedule+0x48/0xc0 blk_mq_freeze_queue_wait+0x94/0x120 blk_mq_queue_reinit_work+0xb8/0x180 blk_mq_queue_reinit_prepare+0x84/0xa0 cpuhp_invoke_callback+0x17c/0x600 cpuhp_up_callbacks+0x58/0x150 _cpu_up+0xf0/0x1c0 do_cpu_up+0x120/0x150 cpu_subsys_online+0x64/0xe0 device_online+0xb4/0x120 online_store+0xb4/0xc0 dev_attr_store+0x68/0xa0 sysfs_kf_write+0x80/0xb0 kernfs_fop_write+0x17c/0x250 __vfs_write+0x6c/0x1e0 vfs_write+0xd0/0x270 SyS_write+0x6c/0x110 system_call+0x38/0xe0 Examination of the queue showed a single reference (no PERCPU_COUNT_BIAS, and __PERCPU_REF_DEAD, __PERCPU_REF_ATOMIC set) and no requests. However, conditions at the time of the race are count of PERCPU_COUNT_BIAS + 0 and __PERCPU_REF_DEAD and __PERCPU_REF_ATOMIC set. The fix is to make the tryget routines use an actual boolean internally instead of the atomic long result truncated to a int. Fixes: e625305b percpu-refcount: make percpu_ref based on longs instead of ints Link: https://bugzilla.kernel.org/show_bug.cgi?id=190751Signed-off-by:
Douglas Miller <dougmill@linux.vnet.ibm.com> Reviewed-by:
Jens Axboe <axboe@fb.com> Signed-off-by:
Tejun Heo <tj@kernel.org> Fixes: e625305b ("percpu-refcount: make percpu_ref based on longs instead of ints") Signed-off-by:
-
Gabriel Krisman Bertazi authored
commit 161e6d44 upstream. One of our kernelCI boxes hanged at boot because a faulty eSDHC device was triggering spurious CARD_INT interrupts for SD cards, causing CMD52 reads, which are not allowed for SD devices. This adds a sanity check to the interruption path, preventing that illegal command from getting sent if the CARD_INT interruption should be disabled. This quirk allows that particular machine to resume boot despite the faulty hardware, instead of getting hung dealing with thousands of mishandled interrupts. Suggested-by:
Adrian Hunter <adrian.hunter@intel.com> Signed-off-by:
Gabriel Krisman Bertazi <krisman@collabora.co.uk> Acked-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Oliver Hartkopp authored
commit a06393ed upstream. When removing a bcm tx operation either a hrtimer or a tasklet might run. As the hrtimer triggers its associated tasklet and vice versa we need to take care to mutually terminate both handlers. Reported-by:
Michael Josenhans <michael.josenhans@web.de> Signed-off-by:
Oliver Hartkopp <socketcan@hartkopp.net> Tested-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
-
Michal Hocko authored
commit 5abf186a upstream. do_generic_file_read() can be told to perform a large request from userspace. If the system is under OOM and the reading task is the OOM victim then it has an access to memory reserves and finishing the full request can lead to the full memory depletion which is dangerous. Make sure we rather go with a short read and allow the killed task to terminate. Link: http://lkml.kernel.org/r/20170201092706.9966-3-mhocko@kernel.orgSigned-off-by:
Michal Hocko <mhocko@suse.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Toshi Kani authored
commit deb88a2a upstream. Patch series "fix a kernel oops when reading sysfs valid_zones", v2. A sysfs memory file is created for each 2GiB memory block on x86-64 when the system has 64GiB or more memory. [1] When the start address of a memory block is not backed by struct page, i.e. a memory range is not aligned by 2GiB, reading its 'valid_zones' attribute file leads to a kernel oops. This issue was observed on multiple x86-64 systems with more than 64GiB of memory. This patch-set fixes this issue. Patch 1 first fixes an issue in test_pages_in_a_zone(), which does not test the start section. Patch 2 then fixes the kernel oops by extending test_pages_in_a_zone() to return valid [start, end). Note for stable kernels: The memory block size change was made by commit bdee237c ("x86: mm: Use 2GB memory block size on large-memory x86-64 systems"), which was accepted to 3.9. However, this patch-set depends on (and fixes) the change to test_pages_in_a_zone() made by commit 5f0f2887 ("mm/memory_hotplug.c: check for missing sections in test_pages_in_a_zone()"), which was accepted to 4.4. So, I recommend that we backport it up to 4.4. [1] 'Commit bdee237c ("x86: mm: Use 2GB memory block size on large-memory x86-64 systems")' This patch (of 2): test_pages_in_a_zone() does not check 'start_pfn' when it is aligned by section since 'sec_end_pfn' is set equal to 'pfn'. Since this function is called for testing the range of a sysfs memory file, 'start_pfn' is always aligned by section. Fix it by properly setting 'sec_end_pfn' to the next section pfn. Also make sure that this function returns 1 only when the range belongs to a zone. Link: http://lkml.kernel.org/r/20170127222149.30893-2-toshi.kani@hpe.comSigned-off-by:
-
Rabin Vincent authored
commit 81ddd8c0 upstream. Reviewed-by:
Jeff Layton <jlayton@redhat.com> file_info_lock is not initalized in initiate_cifs_search(), leading to the following splat after a simple "mount.cifs ... dir && ls dir/": BUG: spinlock bad magic on CPU#0, ls/486 lock: 0xffff880009301110, .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0 CPU: 0 PID: 486 Comm: ls Not tainted 4.9.0 #27 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) ffffc900042f3db0 ffffffff81327533 0000000000000000 ffff880009301110 ffffc900042f3dd0 ffffffff810baf75 ffff880009301110 ffffffff817ae077 ffffc900042f3df0 ffffffff810baff6 ffff880009301110 ffff880008d69900 Call Trace: [<ffffffff81327533>] dump_stack+0x65/0x92 [<ffffffff810baf75>] spin_dump+0x85/0xe0 [<ffffffff810baff6>] spin_bug+0x26/0x30 [<ffffffff810bb159>] do_raw_spin_lock+0xe9/0x130 [<ffffffff8159ad2f>] _raw_spin_lock+0x1f/0x30 [<ffffffff8127e50d>] cifs_closedir+0x4d/0x100 [<ffffffff81181cfd>] __fput+0x5d/0x160 [<ffffffff81181e3e>] ____fput+0xe/0x10 [<ffffffff8109410e>] task_work_run+0x7e/0xa0 [<ffffffff81002512>] exit_to_usermode_loop+0x92/0xa0 [<ffffffff810026f9>] syscall_return_slowpath+0x49/0x50 [<ffffffff8159b484>] entry_SYSCALL_64_fastpath+0xa7/0xa9 Fixes: 3afca265 ("Clarify locking of cifs file and tcon structures and make more granular") Signed-off-by:
Rabin Vincent <rabinv@axis.com> Signed-off-by:
Steve French <smfrench@gmail.com> Signed-off-by:
-
Dan Streetman authored
commit d7b028f5 upstream. Add zswap_init_failed bool that prevents changing any of the module params, if init_zswap() fails, and set zswap_enabled to false. Change 'enabled' param to a callback, and check zswap_init_failed before allowing any change to 'enabled', 'zpool', or 'compressor' params. Any driver that is built-in to the kernel will not be unloaded if its init function returns error, and its module params remain accessible for users to change via sysfs. Since zswap uses param callbacks, which assume that zswap has been initialized, changing the zswap params after a failed initialization will result in WARNING due to the param callbacks expecting a pool to already exist. This prevents that by immediately exiting any of the param callbacks if initialization failed. This was reported here: https://marc.info/?l=linux-mm&m=147004228125528&w=4 And fixes this WARNING: [ 429.723476] WARNING: CPU: 0 PID: 5140 at mm/zswap.c:503 __zswap_pool_current+0x56/0x60 The warning is just noise, and not serious. However, when init fails, zswap frees all its percpu dstmem pages and its kmem cache. The kmem cache might be serious, if kmem_cache_alloc(NULL, gfp) has problems; but the percpu dstmem pages are definitely a problem, as they're used as temporary buffer for compressed pages before copying into place in the zpool. If the user does get zswap enabled after an init failure, then zswap will likely Oops on the first page it tries to compress (or worse, start corrupting memory). Fixes: 90b0fc26 ("zswap: change zpool/compressor at runtime") Link: http://lkml.kernel.org/r/20170124200259.16191-2-ddstreet@ieee.orgSigned-off-by:
Dan Streetman <dan.streetman@canonical.com> Reported-by:
Marcin Miroslaw <marcin@mejor.pl> Cc: Seth Jennings <sjenning@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Cc: Minchan Kim <minchan@kernel.org> Signed-off-by:
-
J. Bruce Fields authored
commit 034dd34f upstream. Olga Kornievskaia says: "I ran into this oops in the nfsd (below) (4.10-rc3 kernel). To trigger this I had a client (unsuccessfully) try to mount the server with krb5 where the server doesn't have the rpcsec_gss_krb5 module built." The problem is that rsci.cred is copied from a svc_cred structure that gss_proxy didn't properly initialize. Fix that. [120408.542387] general protection fault: 0000 [#1] SMP ... [120408.565724] CPU: 0 PID: 3601 Comm: nfsd Not tainted 4.10.0-rc3+ #16 [120408.567037] Hardware name: VMware, Inc. VMware Virtual = Platform/440BX Desktop Reference Platform, BIOS 6.00 07/02/2015 [120408.569225] task: ffff8800776f95c0 task.stack: ffffc90003d58000 [120408.570483] RIP: 0010:gss_mech_put+0xb/0x20 [auth_rpcgss] ... [120408.584946] ? rsc_free+0x55/0x90 [auth_rpcgss] [120408.585901] gss_proxy_save_rsc+0xb2/0x2a0 [auth_rpcgss] [120408.587017] svcauth_gss_proxy_init+0x3cc/0x520 [auth_rpcgss] [120408.588257] ? __enqueue_entity+0x6c/0x70 [120408.589101] svcauth_gss_accept+0x391/0xb90 [auth_rpcgss] [120408.590212] ? try_to_wake_up+0x4a/0x360 [120408.591036] ? wake_up_process+0x15/0x20 [120408.592093] ? svc_xprt_do_enqueue+0x12e/0x2d0 [sunrpc] [120408.593177] svc_authenticate+0xe1/0x100 [sunrpc] [120408.594168] svc_process_common+0x203/0x710 [sunrpc] [120408.595220] svc_process+0x105/0x1c0 [sunrpc] [120408.596278] nfsd+0xe9/0x160 [nfsd] [120408.597060] kthread+0x101/0x140 [120408.597734] ? nfsd_destroy+0x60/0x60 [nfsd] [120408.598626] ? kthread_park+0x90/0x90 [120408.599448] ret_from_fork+0x22/0x30 Fixes: 1d658336 "SUNRPC: Add RPC based upcall mechanism for RPCGSS auth" Cc: Simo Sorce <simo@redhat.com> Reported-by:
Olga Kornievskaia <kolga@netapp.com> Tested-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
Kinglong Mee authored
commit d19fb70d upstream. nfsd assigns the nfs4_free_lock_stateid to .sc_free in init_lock_stateid(). If nfsd doesn't go through init_lock_stateid() and put stateid at end, there is a NULL reference to .sc_free when calling nfs4_put_stid(ns). This patch let the nfs4_stid.sc_free assignment to nfs4_alloc_stid(). Fixes: 356a95ec "nfsd: clean up races in lock stateid searching..." Signed-off-by:
Kinglong Mee <kinglongmee@gmail.com> Reviewed-by:
-
Darren Stevens authored
commit af2b7fa1 upstream. prom_init.c calls 'instance-to-package' twice, but the return is not checked during prom_find_boot_cpu(). The result is then passed to prom_getprop(), which could be PROM_ERROR. Add a return check to prevent this. This was found on a pasemi system, where CFE doesn't have a working 'instance-to package' prom call. Before Commit 5c0484e2 ('powerpc: Endian safe trampoline') the area around addr 0 was mostly 0's and this doesn't cause a problem. Once the macro 'FIXUP_ENDIAN' has been added to head_64.S, the low memory area now has non-zero values, which cause the prom_getprop() call to hang. mpe: Also confirmed that under SLOF if 'instance-to-package' did fail with PROM_ERROR we would crash in SLOF. So the bug is not specific to CFE, it's just that other open firmwares don't trigger it because they have a working 'instance-to-package'. Fixes: 5c0484e2 ("powerpc: Endian safe trampoline") Signed-off-by:
Darren Stevens <darren@stevens-zone.net> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Gavin Shan authored
commit f05fea5b upstream. In __eeh_clear_pe_frozen_state(), we should pass the flag's value instead of its address to eeh_unfreeze_pe(). The isolated flag is cleared if no error returned from __eeh_clear_pe_frozen_state(). We never observed the error from the function. So the isolated flag should have been always cleared, no real issue is caused because of the misused @flag. This fixes the code by passing the value of @flag to eeh_unfreeze_pe(). Fixes: 5cfb20b9 ("powerpc/eeh: Emulate EEH recovery for VFIO devices") Signed-off-by:
Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by:
-
Tejun Heo authored
commit e0edc8c5 upstream. Marko reports that CX1-JB512-HP shows the same timeout issues as CX1-JB256-HP. Let's apply MAX_SEC_128 to all devices in the series. Signed-off-by:
Marko Koski-Vähälä <marko@koski-vahala.com> Signed-off-by:
-
Arvind Yadav authored
commit 064c3db9 upstream. Here, If devm_ioremap will fail. It will return NULL. Then hpriv->base = NULL - 0x20000; Kernel can run into a NULL-pointer dereference. This error check will avoid NULL pointer dereference. Signed-off-by:
Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by:
-
Peter Zijlstra authored
commit 0b3589be upstream. Andres reported that MMAP2 records for anonymous memory always have their protection field 0. Turns out, someone daft put the prot/flags generation code in the file branch, leaving them unset for anonymous memory. Reported-by:
Andres Freund <andres@anarazel.de> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Don Zickus <dzickus@redhat.com Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@gmail.com> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@kernel.org Cc: anton@ozlabs.org Cc: namhyung@kernel.org Fixes: f972eb63 ("perf: Pass protection and flags bits through mmap2 interface") Link: http://lkml.kernel.org/r/20170126221508.GF6536@twins.programming.kicks-ass.netSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Ard Biesheuvel authored
commit 11e3b725 upstream. Update the ARMv8 Crypto Extensions and the plain NEON AES implementations in CBC and CTR modes to return the next IV back to the skcipher API client. This is necessary for chaining to work correctly. Note that for CTR, this is only done if the request is a round multiple of the block size, since otherwise, chaining is impossible anyway. Signed-off-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Salvatore Benedetto authored
commit d6040764 upstream. Make sure CRYPTO_ALG_DEAD bit is cleared before proceeding with the algorithm registration. This fixes qat-dh registration when driver is restarted Signed-off-by:
Salvatore Benedetto <salvatore.benedetto@intel.com> Signed-off-by:
-
Ilia Mirkin authored
commit 24bf7ae3 upstream. Based on the xf86-video-nv code, NFORCE (NV1A) and NFORCE2 (NV1F) have a different way of retrieving clocks. See the nv_hw.c:nForceUpdateArbitrationSettings function in the original code for how these clocks were accessed. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=54587Signed-off-by:
Ilia Mirkin <imirkin@alum.mit.edu> Signed-off-by:
Ben Skeggs <bskeggs@redhat.com> Signed-off-by:
-
Alastair Bridgewater authored
commit d347583a upstream. Store the ELD correctly, not just enough copies of the first byte to pad out the given ELD size. Signed-off-by:
Alastair Bridgewater <alastair.bridgewater@gmail.com> Fixes: 120b0c39 ("drm/nv50-/disp: audit and version SOR_HDA_ELD method") Reviewed-by:
-
Eryu Guan authored
commit 3a4b77cd upstream. Ralf Spenneberg reported that he hit a kernel crash when mounting a modified ext4 image. And it turns out that kernel crashed when calculating fs overhead (ext4_calculate_overhead()), this is because the image has very large s_first_meta_bg (debug code shows it's 842150400), and ext4 overruns the memory in count_overhead() when setting bitmap buffer, which is PAGE_SIZE. ext4_calculate_overhead(): buf = get_zeroed_page(GFP_NOFS); <=== PAGE_SIZE buffer blks = count_overhead(sb, i, buf); count_overhead(): for (j = ext4_bg_num_gdb(sb, grp); j > 0; j--) { <=== j = 842150400 ext4_set_bit(EXT4_B2C(sbi, s++), buf); <=== buffer overrun count++; } This can be reproduced easily for me by this script: #!/bin/bash rm -f fs.img mkdir -p /mnt/ext4 fallocate -l 16M fs.img mke2fs -t ext4 -O bigalloc,meta_bg,^resize_inode -F fs.img debugfs -w -R "ssv first_meta_bg 842150400" fs.img mount -o loop fs.img /mnt/ext4 Fix it by validating s_first_meta_bg first at mount time, and refusing to mount if its value exceeds the largest possible meta_bg number. Reported-by:
Ralf Spenneberg <ralf@os-t.de> Signed-off-by:
Eryu Guan <guaneryu@gmail.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Reviewed-by:
Andreas Dilger <adilger@dilger.ca> Signed-off-by:
-
Bjorn Helgaas authored
commit 030305d6 upstream. In a struct pcie_link_state, link->root points to the pcie_link_state of the root of the PCIe hierarchy. For the topmost link, this points to itself (link->root = link). For others, we copy the pointer from the parent (link->root = link->parent->root). Previously we recognized that Root Ports originated PCIe hierarchies, but we treated PCI/PCI-X to PCIe Bridges as being in the middle of the hierarchy, and when we tried to copy the pointer from link->parent->root, there was no parent, and we dereferenced a NULL pointer: BUG: unable to handle kernel NULL pointer dereference at 0000000000000090 IP: [<ffffffff9e424350>] pcie_aspm_init_link_state+0x170/0x820 Recognize that PCI/PCI-X to PCIe Bridges originate PCIe hierarchies just like Root Ports do, so link->root for these devices should also point to itself. Fixes: 51ebfc92 ("PCI: Enumerate switches below PCI-to-PCIe bridges") Link: https://bugzilla.kernel.org/show_bug.cgi?id=193411 Link: https://bugzilla.opensuse.org/show_bug.cgi?id=1022181 Tested-by: lists@ssl-mail.com Tested-by:
Jayachandran C. <jnair@caviumnetworks.com> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Signed-off-by:
-
- 04 Feb, 2017 10 commits
-
-
Greg Kroah-Hartman authored
-
Florian Fainelli authored
[ Upstream commit f154be24 ] Commit 448b4482 ("net: dsa: Add lockdep class to tx queues to avoid lockdep splat") removed the netif_device_detach() call done in dsa_slave_suspend() which is necessary, and paired with a corresponding netif_device_attach(), bring it back. Fixes: 448b4482 ("net: dsa: Add lockdep class to tx queues to avoid lockdep splat") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Bjørn Mork authored
[ Upstream commit 5b9f5751 ] Another rebranded Novatel E371. qmi_wwan should drive this device, while cdc_ether should ignore it. Even though the USB descriptors are plain CDC-ETHER that USB interface is a QMI interface. Ref commit 7fdb7846 ("qmi_wwan/cdc_ether: add device IDs for Dell 5804 (Novatel E371) WWAN card") Cc: Dan Williams <dcbw@redhat.com> Signed-off-by:
-
WANG Cong authored
[ Upstream commit 0fb44559 ] Dmitry reported a deadlock scenario: unix_bind() path: u->bindlock ==> sb_writer do_splice() path: sb_writer ==> pipe->mutex ==> u->bindlock In the unix_bind() code path, unix_mknod() does not have to be done with u->bindlock held, since it is a pure fs operation, so we can just move unix_mknod() out. Reported-by:
Dmitry Vyukov <dvyukov@google.com> Tested-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
hayeswang authored
[ Upstream commit 6a0b76c0 ] Runtime suspend shouldn't be executed if the tx queue is not empty, because the device is not idle. Signed-off-by:
Hayes Wang <hayeswang@realtek.com> Signed-off-by:
-
Ivan Vecera authored
[ Upstream commit b6677449 ] Any bridge options specified during link creation (e.g. ip link add) are ignored as br_dev_newlink() does not process them. Use br_changelink() to do it. Fixes: 13323516 ("bridge: implement rtnl_link_ops->changelink") Signed-off-by:
Ivan Vecera <cera@cera.cz> Reviewed-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Alexey Kodanev authored
[ Upstream commit 0dbd7ff3 ] Found that if we run LTP netstress test with large MSS (65K), the first attempt from server to send data comparable to this MSS on fastopen connection will be delayed by the probe timer. Here is an example: < S seq 0:0 win 43690 options [mss 65495 wscale 7 tfo cookie] length 32 > S. seq 0:0 ack 1 win 43690 options [mss 65495 wscale 7] length 0 < . ack 1 win 342 length 0 Inside tcp_sendmsg(), tcp_send_mss() returns max MSS in 'mss_now', as well as in 'size_goal'. This results the segment not queued for transmition until all the data copied from user buffer. Then, inside __tcp_push_pending_frames(), it breaks on send window test and continues with the check probe timer. Fragmentation occurs in tcp_write_wakeup()... +0.2 > P. seq 1:43777 ack 1 win 342 length 43776 < . ack 43777, win 1365 length 0 > P. seq 43777:65001 ack 1 win 342 options [...] length 21224 ... This also contradicts with the fact that we should bound to the half of the window if it is large. Fix this flaw by correctly initializing max_window. Before that, it could have large values that affect further calculations of 'size_goal'. Fixes: 168a8f58 ("tcp: TCP Fast Open Server - main code path") Signed-off-by:
Alexey Kodanev <alexey.kodanev@oracle.com> Acked-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Kefeng Wang authored
[ Upstream commit 03e4deff ] Just like commit 4acd4945 ("ipv6: addrconf: Avoid calling netdevice notifiers with RCU read-side lock"), it is unnecessary to make addrconf_disable_change() use RCU iteration over the netdev list, since it already holds the RTNL lock, or we may meet Illegal context switch in RCU read-side critical section. Signed-off-by:
Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by:
-
Daniel Gonzalez Cabanelas authored
[ Upstream commit cd33b3e0 ] Commit a1cba561 ("net: phy: Add Broadcom phy library for common interfaces") make the BCM63xx PHY driver utilize bcm_phy_config_intr() which would appear to do the right thing, except that it does not write to the MII_BCM63XX_IR register but to MII_BCM54XX_ECR which is different. This would be causing invalid link parameters and events from being generated by the PHY interrupt. Fixes: a1cba561 ("net: phy: Add Broadcom phy library for common interfaces") Signed-off-by:
Daniel Gonzalez Cabanelas <dgcbueu@gmail.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 7be2c82c ] Ashizuka reported a highmem oddity and sent a patch for freescale fec driver. But the problem root cause is that core networking stack must ensure no skb with highmem fragment is ever sent through a device that does not assert NETIF_F_HIGHDMA in its features. We need to call illegal_highdma() from harmonize_features() regardless of CSUM checks. Fixes: ec5f0615 ("net: Kill link between CSUM and SG features.") Signed-off-by:
"Ashizuka, Yuusuke" <ashiduka@jp.fujitsu.com> Signed-off-by:
-
